Activation of the sulfhydryl group by Mo centers: kinetics of reaction of benzyl radical with a binuclear Mo(micro-SH)Mo complex and with arene and alkane thiols

This paper provides evidence from kinetic experiments and electronic structure calculations of a significantly reduced S-H bond strength in the Mo(micro-SH)Mo function in the homogeneous catalyst model, CpMo(micro-S)(2)(micro-SH)(2)MoCp (1, Cp = eta(5)-cyclopentadienyl). The reactivity of 1 was explored by determination of a rate expression for hydrogen atom abstraction by benzyl radical from 1 (log(k(abs)/M(-)(1) s(-)(1)) = (9.07 +/- 0.38) - (3.62 +/- 0.58)/theta) for comparison with expressions for CH(3)(CH(2))(7)SH, log(k(abs)/M(-)(1) s(-)(1)) = (7.88 +/- 0.35) - (4.64 +/- 0.54)/theta, and for 2-mercaptonaphthalene, log(k(abs)/M(-)(1) s(-)(1)) = (8.21 +/- 0.17) - (4.24 +/- 0.26)/theta (theta = 2.303RT kcal/mol, 2sigma error). The rate constant for hydrogen atom abstraction at 298 K by benzyl radical from 1 is 2 orders of magnitude greater than that from 1-octanethiol, resulting from the predicted (DFT) S-H bond strength of 1 of 73 kcal/mol. The radical CpMo(micro-S)(3)(micro-SH)MoCp, 2, is revealed, from the properties of slow self-reaction, and exclusive cross-combination with reactive benzyl radical, to be a persistent free radical.     

Isolation of (CO)1- and (CO2)1- radical complexes of rare earths via Ln(NR2)3/K reduction and [K2(18-crown-6)2]2+ oligomerization

Deep-blue solutions of Y(2+) formed from Y(NR(2))(3) (R = SiMe(3)) and excess potassium in the presence of 18-crown-6 at -45 °C under vacuum in diethyl ether react with CO at -78 °C to form colorless crystals of the (CO)(1-) radical complex, {[(R(2)N)(3)Y(μ-CO)(2)][K(2)(18-crown-6)(2)]}(n), 1. The polymeric structure contains trigonal bipyramidal [(R(2)N)(3)Y(μ-CO)(2)](2-) units with axial (CO)(1-) ligands linked by [K(2)(18-crown-6)(2)](2+) dications. Byproducts such as the ynediolate, [(R(2)N)(3)Y](2)(μ-OC≡CO){[K(18-crown-6)](2)(18-crown-6)}, 2, in which two (CO)(1-) anions are coupled to form (OC≡CO)(2-), and the insertion/rearrangement product, {(R(2)N)(2)Y[OC(═CH(2))Si(Me(2))NSiMe(3)]}[K(18-crown-6)], 3, are common in these reactions that give variable results depending on the specific reaction conditions. The CO reduction in the presence of THF forms a solvated variant of 2, the ynediolate [(R(2)N)(3)Y](2)(μ-OC≡CO)[K(18-crown-6)(THF)(2)](2), 2a. CO(2) reacts analogously with Y(2+) to form the (CO(2))(1-) radical complex, {[(R(2)N)(3)Y(μ-CO(2))(2)][K(2)(18-crown-6)(2)]}(n), 4, that has a structure similar to that of 1. Analogous (CO)(1-) and (OC≡CO)(2-) complexes of lutetium were isolated using Lu(NR(2))(3)/K/18-crown-6: {[(R(2)N)(3)Lu(μ-CO)(2)][K(2)(18-crown-6)(2)]}(n), 5, [(R(2)N)(3)Lu](2)(μ-OC≡CO){[K(18-crown-6)](2)(18-crown-6)}, 6, and [(R(2)N)(3)Lu](2)(μ-OC≡CO)[K(18-crown-6)(Et(2)O)(2)](2), 6a.     

New superhindered polydentate polyphosphine ligands P(CH2CH2P(t)Bu2)3, PhP(CH2CH2P(t)Bu2)2, P(CH2CH2CH2P(t)Bu2)3, and their ruthenium(II) chloride complexes

The synthesis and characterization of the extremely hindered phosphine ligands, P(CH(2)CH(2)P(t)Bu(2))(3) (P(2)P(3)(tBu), 1), PhP(CH(2)CH(2)P(t)Bu(2))(2) (PhP(2)P(2)(tBu), 2), and P(CH(2)CH(2)CH(2)P(t)Bu(2))(3) (P(3)P(3)(tBu), 3) are reported, along with the synthesis and characterization of ruthenium chloro complexes RuCl(2)(P(2)P(3)(tBu)) (4), RuCl(2)(PhP(2)P(2)(tBu)) (5), and RuCl(2)(P(3)P(3)(tBu)) (6). The bulky P(2)P(3)(tBu) (1) and P(3)P(3)(tBu) (3) ligands are the most sterically encumbered PP(3)-type ligands so far synthesized, and in all cases, only three phosphorus donors are able to bind to the metal center. Complexes RuCl(2)(PhP(2)P(2)(tBu)) (5) and RuCl(2)(P(3)P(3)(tBu)) (6) were characterized by crystallography. Low temperature solution and solid state (31)P{(1)H} NMR were used to demonstrate that the structure of RuCl(2)(P(2)P(3)(tBu)) (4) is probably analogous to that of RuCl(2)(PhP(2)P(2)(tBu)) (5) which had been structurally characterized.     

Direct Lanthanide-Transition Metal Interactions: Synthesis of (NH(3))(2)YbFe(CO)(4) and Crystal Structures of {[(CH(3)CN)(3)YbFe(CO)(4)](2).CH(3)CN}(infinity) and [(CH(3)CN)(3)YbFe(CO)(4)](infinity)

The heterometallic complex (NH(3))(2)YbFe(CO)(4) was prepared from the reduction of Fe(3)(CO)(12) by Yb in liquid ammonia. Ammonia was displaced from (NH(3))(2)YbFe(CO)(4) by acetonitrile in acetonitrile solution, and the crystalline compounds {[(CH(3)CN)(3)YbFe(CO)(4))](2).CH(3)CN}(infinity) and [(CH(3)CN)(3)YbFe(CO)(4)](infinity) were obtained. An earlier X-ray study of {[(CH(3)CN)(3)YbFe(CO)(4)](2).CH(3)CN}(infinity) showed that it is a ladder polymer with direct Yb-Fe bonds. In the present study, an X-ray crystal structure analysis also showed that [(CH(3)CN)(3)YbFe(CO)(4)](infinity) is a sheetlike array with direct Yb-Fe bonds. Crystal data for {[(CH(3)CN)(3)YbFe(CO)(4)](2).CH(3)CN}(infinity): monoclinic space group P2(1)/c, a = 21.515(8) ?, b = 7.838(2) ?, c = 19.866(6) ?, beta = 105.47(2) degrees, Z = 4. Crystal data for [(CH(3)CN)(3)YbFe(CO)(4)](infinity): monoclinic space group P2(1)/n, a = 8.364(3) ?, b = 9.605(5) ?, c = 17.240(6) ?, beta = 92.22(3) degrees, Z = 4. Electrical conductivity measurements in acetonitrile show that these acetonitrile complexes are partially dissociated into ionic species. IR and NMR spectra of the solutions reveal the presence of [HFe(CO)(4)](-). However, upon recrystallization, the acetonitrile complexes show no evidence for the presence of [HFe(CO)(4)](-) on the basis of their IR spectra. The solid state MAS (2)H NMR spectra of deuterated acetonitrile complexes give no evidence for [(2)HFe(CO)(4)](-). It appears that rupture of the Yb-Fe bond could occur in solution to generate the ion pair [L(n)Yb](2+)[Fe(CO)(4)](2-), but then the highly basic [Fe(CO)(4)](2-) anion could abstract a proton from a coordinated acetonitrile ligand to form [HFe(CO)(4)](-). However, upon crystallization, the proton could be transferred back to the ligand, which results in the neutral polymeric species.     

(CH3)2NH(CH2)2NH(CH3)2][(UO2)2F2(HPO4)2]: a new organically templated layered uranium phosphate fluoride--synthesis, structure, characterization, and ion-exchange reactions

A new organically templated layered uranium phosphate fluoride, [(CH(3))(2)NH(CH(2))(2)NH(CH(3))(2)][(UO(2))(2)F(2)(HPO(4))(2)] has been synthesized by hydrothermal reaction of UO(3), H(3)PO(4), HF, and (CH(3))(2)NCH(2)CH(2)N(CH(3))(2) at 140 degrees C. [(CH(3))(2)NH(CH(2))(2)NH(CH(3))(2)][(UO(2))(2)F(2)(HPO(4))(2)] has a layered crystal structure consisting of seven-coordinated UO(5)F(2) pentagonal bipyramids and four-coordinated HPO(4) tetrahedra. Each anionic layer containing three-, four-, and six-membered rings is separated by [(CH(3))(2)NH(CH(2))(2)NH(CH(3))(2)](2+) cations. The [(CH(3))(2)NH(CH(2))(2)NH(CH(3))(2)](2+) cations may be readily exchanged with the M(2+) ions (M = Ba, Sr and Ca) in water to give high crystalline AE(UO(2))(2)(PO(4))(2).6H(2)O (AE = Ca, Sr, Ba).     

Methyl Tin(IV) derivatives of HOTeF(5) and HN(SO(2)CF(3))(2): a solution multinuclear NMR study and the X-ray crystal structures of (CH(3))(2)SnCl(OTeF(5)) and [(CH(3))(3)Sn(H(2)O)(2)][N(SO(2)CF(3))(2)

The new tin(IV) species (CH(3))(2)SnCl(OTeF(5)) was prepared via either the solvolysis of (CH(3))(3)SnCl in HOTeF(5) or the reaction of (CH(3))(3)SnCl with ClOTeF(5). It was characterized by NMR and vibrational spectroscopy, mass spectrometry, and single crystal X-ray diffraction. (CH(3))(2)SnCl(OTeF(5)) crystallizes in the monoclinic space group P2(1)/n (a = 5.8204(8) A, b =10.782(1) A, c =15.493(2) A, beta = 91.958(2) degrees, V = 971.7(2) A(3), Z = 4). NMR spectroscopy of (CH(3))(3)SnX, prepared from excess Sn(CH(3))(4) and HX (X = OTeF(5) or N(SO(2)CF(3))(2)), revealed a tetracoordinate tin environment using (CH(3))(3)SnX as a neat liquid or in dichloromethane-d(2) (CD(2)Cl(2)) solutions. In acetone-d(6) and acetonitrile-d(3) (CD(3)CN) solutions, the tin atom in (CH(3))(3)SnOTeF(5) was found to extend its coordination number to five by adding one solvent molecule. In the strong donor solvent DMSO, the Sn-OTeF(5) bond is broken and the (CH(3))(3)Sn(O=S(CH(3))(2))(2)(+) cation and the OTeF(5)(-) anion are formed. (CH(3))(3)SnOTeF(5) and (CH(3))(3)SnN(SO(2)CF(3))(2) react differently with water. While the Te-F bonds in the OTeF(5) group of (CH(3))(3)SnOTeF(5) undergo complete hydrolysis that results in the formation of [(CH(3))(3)Sn(H(2)O)(2)](2)SiF(6), (CH(3))(3)SnN(SO(2)CF(3))(2) forms the stable hydrate salt [(CH(3))(3)Sn(H(2)O)(2)][N(SO(2)CF(3))(2)]. This salt crystallizes in the monoclinic space group P2(1)/c (a = 7.3072(1) A, b =13.4649(2) A, c =16.821(2) A, beta = 98.705(1) degrees, V = 1636.00(3) A(3), Z = 4) and was also characterized by NMR and vibrational spectroscopy.     

Structure and unimolecular chemistry of protonated sulfur betaines, (CH3)2S(+)(CH2)(n)CO2H (n = 1 and 2)

The fixed charge zwitterionic sulfur betaines dimethylsulfonioacetate (DMSA) (CH(3))(2)S(+)CH(2)CO(2)(-) and dimethylsulfoniopropionate (DMSP) (CH(3))(2)S(+)(CH(2))(2)CO(2)(-) have been synthesized and the structures of their protonated salts (CH(3))(2)S(+)CH(2)CO(2)H···Cl(-) [DMSA.HCl] and (CH(3))(2)S(+)(CH(2))(2)CO(2)H···Pcr(-) [DMSP.HPcr] (where Pcr = picrate) have been characterized using X-ray crystallography. The unimolecular chemistry of the [M+H](+) of these betaines was studied using two techniques; collision-induced dissociation (CID) and electron-induced dissociation (EID) in a hybrid linear ion trap Fourier transform ion cyclotron resonance mass spectrometer. Results from the CID study show a richer series of fragmentation reactions for the shorter chain betaine and contrasting main fragmentation pathways. Thus while (CH(3))(2)S(+)(CH(2))(2)CO(2)H fragments via a neighbouring group reaction to generate (CH(3))(2)S(+)H and the neutral lactone as the most abundant fragmentation channel, (CH(3))(2)S(+)CH(2)CO(2)H fragments via a 1,2 elimination reaction to generate CH(3)S(+)=CH(2) as the most abundant fragment ion. To gain insights into these fragmentation reactions, DFT calculations were carried out at the B3LYP/6-311++G(2d,p) level of theory. For (CH(3))(2)S(+)CH(2)CO(2)H, the lowest energy pathway yields CH(3)S(+)=CH(2)via a six-membered transition state. The two fragment ions observed in CID of (CH(3))(2)S(+)(CH(2))(2)CO(2)H are shown to share the same transition state and ion-molecule complex forming either (CH(3))(2)S(+)H or (CH(2))(2)CO(2)H(+). Finally, EID shows a rich and relatively similar fragmentation channels for both protonated betaines, with radical cleavages being observed, including loss of ˙CH(3).     

Suppression of realgar cage degradation during complexation: formation of hybrid coordination polymers with As4S4, PAs3S3, and Cu(I) halide building blocks

Realgar, As(4)S(4), reacts with Cr(CO)(5)THF under cage degradation to give As(4)S(3)·Cr(CO)(5) (1). The reverse structural change is found if solutions of 1 in CH(2)Cl(2) react with equimolar amounts of PAs(3)S(3)·W(CO)(5) and CuX (X = Cl, Br, I) in CH(3)CN under biphasic diffusion conditions. The resulting coordination polymers 2-4 contain a reconstituted realgar molecule along with the PAs(3)S(3) cage. The crystal structures of (CuX)(As(4)S(4))(PAs(3)S(3)) (X = Cl: 2; Br: 3) are characterized by one-dimensional (1D) (CuX)(As(4)S(4)) strands, which are formed by alternating As(4)S(4) cages and CuX dumbbells. Terminal PAs(3)S(3) molecules are coordinated to copper by apical phosphorus and bridging realgar through sulfur. The As(3) triangles of the resulting (CuX)(As(4)S(4))(PAs(3)S(3)) strands interact with halides of neighbored strands to give a folded three-dimensional (3D) network. The structure of (CuI)(3)(As(4)S(4))(PAs(3)S(3)) (4) contains 1D (Cu(3)I(3))(n) strands as backbones, which are bridged by sulfur atoms of two η(1:2)-As(4)S(4) molecules while PAs(3)S(3) confines the resulting sheet. The As(3) triangles at the surface of the layers interact with iodide of the next layer to form a layered 3D network.     

Reactions of halofluorocarbons with group 6 complexes M(C(5)H(5))(2)L (M = Mo, W; L = C(2)H(4), CO). Fluoroalkylation at molybdenum and tungsten, and at cyclopentadienyl or ethylene ligands.

The molybdenum(II) and tungsten(II) complexes [MCp(2)L] (Cp = eta(5)-cyclopentadienyl; L = C(2)H(4), CO) react with perfluoroalkyl iodides to give a variety of products. The Mo(II) complex [MoCp(2)(C(2)H(4))] reacts with perfluoro-n-butyl iodide or perfluorobenzyl iodide with loss of ethylene to give the first examples of fluoroalkyl complexes of Mo(IV), MoCp(2)(CF(2)CF(2)CF(2)CF(3))I (8) and MoCp(2)(CF(2)C(6)F(5))I (9), one of which (8) has been crystallographically characterized. In contrast, the CO analogue [MoCp(2)(CO)] reacts with perfluorobenzyl iodide without loss of CO to give the crystallographically characterized salt, [MoCp(2)(CF(2)C(6)F(5))(CO)](+)I(-) (10), and the W(II) ethylene precursor [WCp(2)(C(2)H(4))] reacts with perfluorobenzyl iodide without loss of ethylene to afford the salt [WCp(2)(CF(2)C(6)F(5))(C(2)H(4))](+)I(-) (11). These observations demonstrate that the metal-carbon bond is formed first. In further contrast the tungsten precursor [WCp(2)(C(2)H(4))] reacts with perfluoro-n-butyl iodide, perfluoro-iso-propyl iodide, and pentafluorophenyl iodide to give fluoroalkyl- and fluorophenyl-substituted cyclopentadienyl complexes WCp(eta(5)-C(5)H(4)R(F))(H)I (12, R(F) = CF(2)CF(2)CF(2)CF(3); 15, R(F) = CF(CF(3))(2); 16, R(F) = C(6)F(5)); the Mo analogue MoCp(eta(5)-C(5)H(4)R(F))(H)I (14, R(F) = CF(CF(3))(2)) is obtained in similar fashion. The tungsten(IV) hydrido compounds react with iodoform to afford the corresponding diiodides WCp(eta(5)-C(5)H(4)R(F))I(2) (13, R(F) = CF(2)CF(2)CF(2)CF(3); 18, R(F) = CF(CF(3))(2); 19, R(F) = C(6)F(5)), two of which (13 and 19) have been crystallographically characterized. The carbonyl precursors [MCp(2)(CO)] each react with perfluoro-iso-propyl iodide without loss of CO, to afford the exo-fluoroalkylated cyclopentadiene M(II) complexes MCp(eta(4)-C(5)H(5)R(F))(CO)I (21, M = Mo; 22, M = W); the exo-stereochemistry for the fluoroalkyl group is confirmed by an X-ray structural study of 22. The ethylene analogues [MCp(2)(C(2)H(4))] react with perfluoro-tert-butyl iodide to yield the products MCp(2)[(CH(2)CH(2)C(CF(3))(3)]I (25, M = Mo; 26, M = W) resulting from fluoroalkylation at the ethylene ligand. Attempts to provide positive evidence for fluoroalkyl radicals as intermediates in reactions of primary and benzylic substrates were unsuccessful, but trapping experiments with CH(3)OD (to give R(F)D, not R(F)H) indicate that fluoroalkyl anions are the intermediates responsible for ring and ethylene fluoroalkylation in the reactions of secondary and tertiary fluoroalkyl substrates.     

Synthesis of triamidoamine ligands of the type (ArylNHCH(2)CH(2))(3)N and molybdenum and tungsten complexes that contain an [ArylNCH(2)CH(2))(3)N]3- ligand

Aryl bromides react with (H(2)NCH(2)CH(2))(3)N in a reaction catalyzed by Pd(2)(dba)(3) in the presence of BINAP and NaO-t-Bu to give the arylated derivatives (ArylNHCH(2)CH(2))(3)N [Aryl = C(6)H(5) (1a), 4-FC(6)H(4) (1b), 4-t-BuC(6)H(4) (1c), 3,5-Me(2)C(6)H(3) (1d), 3,5-Ph(2)C(6)H(3) (1e), 3,5-(4-t-BuC(6)H(4))(2)C(6)H(3) (1f), 2-MeC(6)H(4) (1g), 2,4,6-Me(3)C(6)H(2) (1h)]. Reactions between (ArNHCH(2)CH(2))(3)N (Ar = C(6)H(5), 4-FC(6)H(4), 3,5-Me(2)C(6)H(3), and 3,5-Ph(2)C(6)H(3)) and Mo(NMe(2))(4) in toluene at 70 degrees C lead to [(ArNHCH(2)CH(2))(3)N]Mo(NMe(2)) complexes in yields ranging from 64 to 96%. Dimethylamido species (Ar = 4-FC(6)H(4), 3,5-Me(2)C(6)H(3)) could be converted into paramagnetic [(ArNHCH(2)CH(2))(3)N]MoCl species by treating them with 2,6-lutidinium chloride in tetrahydrofuran (THF). The "direct reaction" between 1a-f and MoCl(4)(THF)(2) in THF followed by 3 equiv of MeMgCl yielded [(ArNHCH(2)CH(2))(3)N]MoCl species (3a-f) in high yield. If 4 equiv of LiMe instead of MeMgCl are employed in the direct reaction, then [(ArNHCH(2)CH(2))(3)N]MoMe species are formed. Tungsten species, [(ArNHCH(2)CH(2))(3)N]WCl, could be prepared by analogous "direct" methods. Cyclic voltammetric studies reveal that MoCl complexes become more difficult to reduce as the electron donating ability of the [ArylNCH(2)CH(2))(3)N]3- ligand increases, and the reductions become less reversible, consistent with ready loss of chloride from ([(ArNHCH(2)CH(2))(3)N]MoCl)(-). Tungsten complexes are more difficult to reduce, and reductions are irreversible on the CV time scale.     

Intercluster reactions show that (CH3)2S(+)CH2CO2H is a better methyl cation donor than (CH3)3N(+)CH2CO2H

The intrinsic methylating abilities of the known biological methylating zwitterionic agents, dimethylsulfonioacetate (DMSA), (CH(3))(2)S?CH(2)CO(2)(-) (1) and glycine betaine (GB), (CH(3))(3)N?CH(2)CO(2)(-) (2), have been examined via a range of gas phase experiments involving collision-induced dissociation (CID) of their proton-bound homo- and heterodimers, including those containing the amino acid arginine. The relative yields of the products of methyl cation transfer are consistent in all cases and show that protonated DMSA is a more potent methylating agent than protonated GB. Since methylation can occur at more than one site in arginine, the [M+CH(3)](+) ion of arginine, formed from the heterocluster [DMSA+Arg+H](+), was subject to an additional stage of CID. The resultant CID spectrum is virtually identical to that of an authentic sample of protonated arginine-O-methyl ester but is significantly different to that of an authentic sample of protonated N(G)-methyl arginine. This suggests that methylation has occurred within a salt bridge complex of [DMSA+Arg+H](+), in which the arginine exists in the zwitterionic form. Finally, density functional theory calculations on the model salts, (CH(3)CO(2)(-))[(CH(3))(3)S(+)] and (CH(3)CO(2)(-))[(CH(3))(4)N(+)], show that methylation of CH(3)CO(2)(-) by (CH(3))(3)S(+) is both kinetically and thermodynamically preferred over methylation by (CH(3))(4)N(+).     

Dicarboxylate-bridged (Mo2)n (n = 2, 3, 4) paddle-wheel complexes: potential intermediate building blocks for metal-organic frameworks

The treatment of the dimeric paddle-wheel (PW) compound [Mo(2)(NCCH(3))(10)][BF(4)](4)1 with oxalic acid (0.5 equiv.), 1,1-cyclobutanedicarboxylic acid (1 equiv.), 5-hydroxyisophthalic acid (1 equiv.) (m-bdc-OH) or 2,3,5,6-tetrafluoroterephthalic acid (0.5 or 1 equiv.) leads to the formation of macromolecular dicarboxylate-linked (Mo(2))(n) entities (n = 2, 3, 4). The structure of the compounds depends on the length and geometry of the organic linkers. In the case of oxalic acid, the dimeric compound [(CH(3)CN)(8)Mo(2)(OOC-COO)Mo(2)(NCCH(3))(8)][BF(4)](6)2 is formed selectively, whereas the use of 2,3,5,6-tetrafluoroterephthalic acid affords the square-shaped complex [(CH(3)CN)(6)Mo(2)(OOC-C(6)F(4)-COO)](4)[BF(4)](8)3. Bent linkers with a bridging angle of 109° and 120°, respectively, lead to the formation of the molecular loop [(CH(3)CN)(6)Mo(2)(OOC-C(4)H(6)-COO)](2)[BF(4)](4)4 and the bowl-shaped molecular triangle [(CH(3)CN)(6)Mo(2)(m-bdc-OH)](3)[BF(4)](6)5. All complexes are characterised by X-ray single crystal diffraction, NMR ((1)H, (11)B, (13)C and (19)F) and UV-Vis spectroscopy.     

Synthesis and reactivity of the hydrido- and alkylrhenium methylidene complexes Cp*(PMe3)2(R)Re=CH2 (R = H, CH3)

Protonolysis of the dimethylrhenium(III) compound Cp(PMe(3))(2)Re(CH(3))(2) (3) led to formation of the highly reactive hydridorhenium methylidene compound [Cp(PMe(3))(2)Re(CH(2))(H)][OTf] (4), which was characterized spectroscopically at low temperature. Although 4 decomposed above -30 degrees C, reactivity studies performed at low temperature indicated it was in equilibrium with the coordinatively unsaturated methylrhenium complex [Cp(PMe(3))(2)Re(CH(3))][OTf] (2). Methylidene complex 4 was found to react with PMe(3) to afford [Cp(PMe(3))(3)Re(CH(3))][OTf] (6) and with chloride anion to give Cp(PMe(3))(2)Re(Me)Cl (7). When BAr(f) anion was added to 4, the thermally stable methylrhenium methylidene complex [Cp(PMe(3))(2)Re(CH(2))(CH(3))][BAr(f)] (8) was isolated upon warming to room temperature. The mechanisms of formation of both 4 and 8 are discussed in detail, including DFT calculations. The novel carbonyl ligated complex Cp(CO)(2)Re(CH(3))OTf (12) was prepared, isolated, and found to not undergo migration reactions to form methylidene complexes.     

Methanesulfonates of high-valent metals: syntheses and structural features of MoO2(CH3SO3)2, UO2(CH3SO3)2, ReO3(CH3SO3), VO(CH3SO3)2, and V2O3(CH3SO3)4 and their thermal decomposition under N2 and O2 atmosphere

Oxide methanesulfonates of Mo, U, Re, and V have been prepared by reaction of MoO(3), UO(2)(CH(3)COO)(2)·2H(2)O, Re(2)O(7)(H(2)O)(2), and V(2)O(5) with CH(3)SO(3)H or mixtures thereof with its anhydride. These compounds are the first examples of solvent-free oxide methanesulfonates of these elements. MoO(2)(CH(3)SO(3))(2) (Pbca, a=1487.05(4), b=752.55(2), c=1549.61(5) pm, V=1.73414(9) nm(3), Z=8) contains [MoO(2)] moieties connected by [CH(3)SO(3)] ions to form layers parallel to (100). UO(2)(CH(3)SO(3))(2) (P2(1)/c, a=1320.4(1), b=1014.41(6), c=1533.7(1) pm, β=112.80(1)°, V=1.8937(3) nm(3), Z=8) consists of linear UO(2)(2+) ions coordinated by five [CH(3)SO(3)] ions, forming a layer structure. VO(CH(3)SO(3))(2) (P2(1)/c, a=1136.5(1), b=869.87(7), c=915.5(1) pm, β=113.66(1)°, V=0.8290(2) nm(3), Z=4) contains [VO] units connected by methanesulfonate anions to form corrugated layers parallel to (100). In ReO(3)(CH(3)SO(3)) (P1, a=574.0(1), b=1279.6(3), c=1641.9(3) pm, α=102.08(2), β=96.11(2), γ=99.04(2)°, V=1.1523(4) nm(3), Z=8) a chain structure exhibiting infinite O-[ReO(2)]-O-[ReO(2)]-O chains is formed. Each [ReO(2)]-O-[ReO(2)] unit is coordinated by two bidentate [CH(3)SO(3)] ions. V(2)O(3)(CH(3)SO(3))(4) (I2/a, a=1645.2(3), b=583.1(1), c=1670.2(3) pm, β=102.58(3), V=1.5637(5) pm(3), Z=4) adopts a chain structure, too, but contains discrete [VO]-O-[VO] moieties, each coordinated by two bidentate [CH(3)SO(3)] ligands. Additional methanesulfonate ions connect the [V(2)O(3)] groups along [001]. Thermal decomposition of the compounds was monitored under N(2) and O(2) atmosphere by thermogravimetric/differential thermal analysis and XRD measurements. Under N(2) the decomposition proceeds with reduction of the metal leading to the oxides MoO(2), U(3)O(7), V(4)O(7), and VO(2); for MoO(2)(CH(3)SO(3))(2), a small amount of MoS(2) is formed. If the thermal decomposition is carried out in a atmosphere of O(2) the oxides MoO(3) and V(2)O(5) are formed.     

(Eta-C5H4R)Fe(CO)2X], X = Cl, Br, I, NO3, CO2Me and [(eta-C5H4R)Fe(CO)3]+, R = (CH2)nCO2Me (n = 0-2), and CO2CH2CH2OH: a new group of CO-releasing molecules

A new group of CO-releasing molecules, CO-RMs, based on cyclopentadienyl iron carbonyls have been identified. X-Ray structures have been determined for [(eta-C(5)H(4)CO(2)Me)Fe(CO)(2)X], X = Cl, Br, I, NO(3), CO(2)Me, [(eta-C(5)H(4)CO(2)Me)Fe(CO)(2)](2), [(eta-C(5)H(4)CO(2)CH(2)CH(2)OH)Fe(CO)(2)](2) and [(eta-C(5)H(4)CO(2)Me)Fe(CO)(3)][FeCl(4)]. Half-lives for CO release, (1)H, (13)C, and (17)OC NMR and IR spectra have been determined along with some biological data for these compounds, [(eta-C(5)H(4)CO(2)CH(2)CH(2)OH)Fe(CO)(3)](+) and [[eta-C(5)H(4)(CH(2))(n)CO(2)Me]Fe(CO)(3)](+), n = 1, 2. More specifically, cytotoxicity assays and inhibition of nitrite formation in stimulated RAW264.7 macrophages are reported for most of the compounds analyzed. [(eta-C(5)H(5))Fe(CO)(2)X], X = Cl, Br, I, were also examined for comparison. Correlations between the half-lives for CO release and spectroscopic parameters are found within each group of compounds, but not between the groups.     

Excited-state properties of Rh(2)(O(2)CCH(3))(4)(L)(2) (L = CH(3)OH, THF, PPh(3), py)

The photophysical properties of Rh(2)(O(2)CCH(3))(4)(L)(2) (L = CH(3)OH, THF = tetrahydrofuran, PPh(3) = triphenylphosphine, py = pyridine) were explored upon excitation with visible light. Time-resolved absorption shows that all the complexes possess a long-lived transient (3.5-5.0 micros) assigned as an electronic excited state of the molecules, and they exhibit an optical transition at approximately 760 nm whose position is independent of axial ligand. No emission from the Rh(2)(O(2)CCH(3))(4)(L)(2) (L = CH(3)OH, THF, PPh(3), py) systems was detected, but energy transfer from Rh(2)(O(2)CCH(3))(4)(PPh(3))(2) to the (3)pipi excited state of perylene is observed. Electron transfer from Rh(2)(O(2)CCH(3))(4)(PPh(3))(2) to 4,4'-dimethyl viologen (MV(2+)) and chloro-p-benzoquinone (Cl-BQ) takes place with quenching rate constants (k(q)) of 8.0 x 10(6) and 1.2 x 10(6) M(-1) s(-1) in methanol, respectively. A k(q) value of 2 x 10(8) M(-1) s(-1) was measured for the quenching of the excited state of Rh(2)(O(2)CCH(3))(4)(PPh(3))(2) by O(2) in methanol. The observations are consistent with the production of an excited state with excited-state energy, E(00), between 1.34 and 1.77 eV.     

A high-pressure iron K-edge x-ray absorption spectral study of the spin-state crossover in (Fe[HC(3,5-(CH(3))(2)pz)(3)](2))I(2) and (Fe[HC(3,5-(CH(3))(2)pz)(3)](2))(BF(4))(2)

The room temperature iron K-edge X-ray absorption near edge structure spectra of (Fe[HC(3,5-(CH(3))(2)pz)(3)](2))I(2) and (Fe[HC(3,5-(CH(3))(2)pz)(3)](2))(BF(4))(2) have been measured between ambient and 88 and 94 kbar, respectively, in an opposed diamond anvil cell. The iron(II) in (Fe[HC(3,5-(CH(3))(2)pz)(3)](2))I(2)undergoes the expected gradual spin-state crossover from the high-spin state to the low-spin state with increasing pressure. In contrast, the iron(II) in (Fe[HC(3,5-(CH(3))(2)pz)(3)](2))(BF(4))(2) remains high-spin between ambient and 78 kbar and is only transformed to the low-spin state at an applied pressure of between 78 and 94 kbar. No visible change is observed in the preedge peak in the spectra of (Fe[HC(3,5-(CH(3))(2)pz)(3)](2))I(2) with increasing pressure, whereas the preedge peak in the spectra of ((e[HC(3,5-(CH(3))(2)pz)(3)](2))(BF(4))(2) changes as expected for a high-spin to low-spin crossover with increasing pressure. The difference in the spin-state crossover behavior of these two complexes is likely related to the unusual behavior of (Fe[HC(3,5-(CH(3))(2)pz)(3)](2))(BF(4))(2) upon cooling.     

Reactions of (PCP)Ru(CO)(NHPh)(PMe3) (PCP = 2,6-(CH2PtBu2)2C6H3) with substrates that possess polar bonds

The Ru(II) amido complex (PCP)Ru(CO)(PMe(3))(NHPh) (1) (PCP = 2,6-(CH(2)P(t)Bu(2))(2)C(6)H(3)) reacts with compounds that possess polar C=N, C triple bond N, or C=O bonds (e.g., nitriles, carbodiimides, or isocyanates) to produce four-membered heterometallacycles that result from nucleophilic addition of the amido nitrogen to an unsaturated carbon of the organic substrate. Based on studies of the reaction of complex 1 with acetonitrile, the transformations are suggested to proceed by dissociation of trimethylphosphine, followed by coordination of the organic substrate and then intramolecular N-C bond formation. In the presence of ROH (R = H or Me), the fluorinated amidinate complex (PCP)Ru(CO)(N(Ph)C(C(6)F(5))NH) (6) reacts with excess pentafluorobenzonitrile to produce (PCP)Ru(CO)(F)(N(H)C(C(6)F(5))NHPh) (7). The reaction with MeOH also produces o-MeOC(6)F(4)CN (>90%) and p-MeOC(6)F(4)CN (<10%). Details of the solid-state structures of (PCP)Ru(CO)(F)(N(H)C(C(6)F(5))NHPh) (7), (PCP)Ru(CO)[PhNC{NH(hx)}N(hx)] (8), (PCP)Ru(CO){N(Ph)C(NHPh)O} (9), and (PCP)Ru(CO){OC(Ph)N(Ph)} (10) are reported.     

Kinetic and mechanistic study of the reactions of atomic chlorine with CH3CH2Br, CH3CH2CH2Br, and CH2BrCH2Br

A laser flash photolysis-resonance fluorescence technique has been employed to investigate the reactions of atomic chlorine with three alkyl bromides (R-Br) that have been identified as short-lived atmospheric constituents with significant ozone depletion potentials (ODPs). Kinetic data are obtained through time-resolved observation of the appearance of atomic bromine that is formed by rapid unimolecular decomposition of radicals generated via abstraction of a β-hydrogen atom. The following Arrhenius expressions are excellent representations of the temperature dependence of rate coefficients measured for the reactions Cl + CH(3)CH(2)Br (eq 1 ) and Cl + CH(3)CH(2)CH(2)Br (eq 2 ) over the temperature range 221-436 K (units are 10(-11) cm(3) molecule(-1) s(-1)): k(1)(T) = 3.73?exp(-378/T) and k(2)(T) = 5.14?exp(+21/T). The accuracy (2σ) of rate coefficients obtained from the above expressions is estimated to be ±15% for k(2)(T) and +15/-25% for k(1)(T) independent of T. For the relatively slow reaction Cl + CH(2)BrCH(2)Br (eq 3 ), a nonlinear ln k(3) vs 1/T dependence is observed and contributions to observed kinetics from impurity reactions cannot be ruled out; the following modified Arrhenius expression represents the temperature dependence (244-569 K) of upper-limit rate coefficients that are consistent with the data: k(3)(T) ≤ 3.2 × 10(-17)T(2)?exp(-184/T) cm(3) molecule(-1) s(-1). Comparison of Br fluorescence signal strengths obtained when Cl removal is dominated by reaction with R-Br with those obtained when Cl removal is dominated by reaction with Br(2) (unit yield calibration) allows branching ratios for β-hydrogen abstraction (k(ia)/k(i), i = 1,2) to be evaluated. The following Arrhenius-type expressions are excellent representations of the observed temperature dependences: k(1a)/k(1) = 0.85?exp(-230/T) and k(2a)/k(2) = 0.40 exp(+181/T). The accuracy (2σ) of branching ratios obtained from the above expressions is estimated to be ±35% for reaction 1 and ±25% for reaction 2 independent of T. It appears likely that reactions 1 and 2 play a significant role in limiting the tropospheric lifetime and, therefore, the ODP of CH(3)CH(2)Br and CH(3)CH(2)CH(2)Br, respectively.     

Synthesis, Structure, and Characterization of New Li(+) - d(0) -Lone-Pair - Oxides: Noncentrosymmetric Polar Li(6)(Mo(2)O(5))(3)(SeO(3))(6) and Centrosymmetric Li(2)(MO(3))(TeO(3)) (M = Mo(6+) or W(6+))

New quaternary lithium - d(0) cation - lone-pair oxides, Li(6)(Mo(2)O(5))(3)(SeO(3))(6) (Pmn2(1)) and Li(2)(MO(3))(TeO(3)) (P2(1)/n) (M = Mo(6+) or W(6+)), have been synthesized and characterized. The former is noncentrosymmetric and polar, whereas the latter is centrosymmetric. Their crystal structures exhibit zigzag anionic layers composed of distorted MO(6) and asymmetric AO(3) (A = Se(4+) or Te(4+)) polyhedra. The anionic layers stack along a 2-fold screw axis and are separated by Li(+) cations. Powder SHG measurements on Li(6)(Mo(2)O(5))(3)(SeO(3))(6) using 1064 nm radiation reveal a SHG efficiency of approximately 170 × α-SiO(2). Particle size vs SHG efficiency measurements indicate Li(6)(Mo(2)O(5))(3)(SeO(3))(6) is type 1 nonphase-matchable. Converse piezoelectric measurements result in a d(33) value of ～28 pm/V and pyroelectric measurements reveal a pyroelectric coefficient of -0.43 μC/m(2)K at 50 °C for Li(6)(Mo(2)O(5))(3)(SeO(3))(6). Frequency-dependent polarization measurements confirm that Li(6)(Mo(2)O(5))(3)(SeO(3))(6) is nonferroelectric, i.e., the macroscopic polarization is not reversible, or 'switchable'. Infrared, UV-vis, thermogravimetric, and differential thermal analysis measurements and electron localization function calculations were also done for all materials.