Structure and unimolecular chemistry of protonated sulfur betaines, (CH3)2S(+)(CH2)(n)CO2H (n = 1 and 2)

The fixed charge zwitterionic sulfur betaines dimethylsulfonioacetate (DMSA) (CH(3))(2)S(+)CH(2)CO(2)(-) and dimethylsulfoniopropionate (DMSP) (CH(3))(2)S(+)(CH(2))(2)CO(2)(-) have been synthesized and the structures of their protonated salts (CH(3))(2)S(+)CH(2)CO(2)H···Cl(-) [DMSA.HCl] and (CH(3))(2)S(+)(CH(2))(2)CO(2)H···Pcr(-) [DMSP.HPcr] (where Pcr = picrate) have been characterized using X-ray crystallography. The unimolecular chemistry of the [M+H](+) of these betaines was studied using two techniques; collision-induced dissociation (CID) and electron-induced dissociation (EID) in a hybrid linear ion trap Fourier transform ion cyclotron resonance mass spectrometer. Results from the CID study show a richer series of fragmentation reactions for the shorter chain betaine and contrasting main fragmentation pathways. Thus while (CH(3))(2)S(+)(CH(2))(2)CO(2)H fragments via a neighbouring group reaction to generate (CH(3))(2)S(+)H and the neutral lactone as the most abundant fragmentation channel, (CH(3))(2)S(+)CH(2)CO(2)H fragments via a 1,2 elimination reaction to generate CH(3)S(+)=CH(2) as the most abundant fragment ion. To gain insights into these fragmentation reactions, DFT calculations were carried out at the B3LYP/6-311++G(2d,p) level of theory. For (CH(3))(2)S(+)CH(2)CO(2)H, the lowest energy pathway yields CH(3)S(+)=CH(2)via a six-membered transition state. The two fragment ions observed in CID of (CH(3))(2)S(+)(CH(2))(2)CO(2)H are shown to share the same transition state and ion-molecule complex forming either (CH(3))(2)S(+)H or (CH(2))(2)CO(2)H(+). Finally, EID shows a rich and relatively similar fragmentation channels for both protonated betaines, with radical cleavages being observed, including loss of ˙CH(3).     

Unimolecular chemistry of doubly protonated zwitterionic clusters

Electrospray ionization and tandem mass spectrometry experiments have been used to study the fragmentation and electron-ion interactions of doubly charged zwitterionic clusters, [M(15) + 2H](2+) (where M = Glycine Betaine (GB), (CH(3))(3)N(+)CH(2)CO(2)(-), and Dimethylsulfonioacetate (DMSA), (CH(3))(2)S(+)CH(2)CO(2)(-)) which are close to the stability limit, i.e., the Coulomb repulsion of the charge within the cluster competes with attractive forces. The intercluster chemistry was studied using collision-induced dissociation (CID) and electron-induced dissociation (EID) in which the energy of the electrons has been varied from >0 to 30 eV. Experimental results suggest that the zwitterionic binding energy in the clusters follow the order GB > DMSA, which is consistent with theoretical calculations that highlight that the lower dipole moment of DMSA leads to a binding energy of DMSA that is 0.86 times smaller than that for GB. Multiply protonated clusters of both GB and DMSA dissociate through Coulomb explosion, which is in competition with neutral evaporation for DMSA. Electronic excitation of the cluster under EID conditions at higher electron energies >12 eV can lead to new intercluster reactions associated with bond cleavages where differences between the sulfur and nitrogen betaines are minor.     

Trithiotungsten(VI) complexes having phosphine-thiolate hybrid ligands: synthesis and cluster forming reactions with CuBr, FeCl(2), and [Fe(CH(3)CN)(6)](ClO(4))(2)

Five-coordinated trithiotungsten complexes (PPh(4))[(dmsp)W(S)(3)] (1a) and (PPh(4))[(dpsp)W(S)(3)] (1b) (R(2)PCH(2)CH(2)S(-); R = Me (dmsp-)), Ph (dpsp-))) were synthesized by addition of Hdmsp and Hdpsp to a THF solution of (PPh(4))[(EtS)W(S)(3)]. Treatment of 1a with CuBr in the presence of PPh(3) in CH(3)CN afforded a WCu(2) cluster (dmsp)WS(3)Cu(2)(PPh(3))(2)Br (2). The reaction of 1a with 1 equiv of FeCl(2) went smoothly to generate a 1:1 adduct (PPh(4))[(dmsp)WS(3)(FeCl(2))] (3), while 3 did not react further with excess FeCl(2). On the other hand, 3 was found to react with [Fe(CH(3)CN)(6)](ClO(4))(2), giving rise to an unusual tetranuclear cluster, [(dmsp)WS(3)](2)Fe(2)Cl (4), while the reaction of 1a with 2 equiv of [Fe(CH(3)CN)(6)](ClO(4))(2) led to a cyclic octanuclear cluster [(dmsp)WS(3)Fe](4) (5). Although the oxidation states of W(VI), Cu(I), and Fe(II) are retained in 2 and 3, reduction of the metal ions occurs in the formation of 4 and 5. All the complexes reported in this paper were structurally characterized by X-ray analysis. It is anticipated that the new type of trithiotungsten complexes, 1a and 1b, will serve as potential synthons for various heterometallic sulfide clusters.     

Direct Lanthanide-Transition Metal Interactions: Synthesis of (NH(3))(2)YbFe(CO)(4) and Crystal Structures of {[(CH(3)CN)(3)YbFe(CO)(4)](2).CH(3)CN}(infinity) and [(CH(3)CN)(3)YbFe(CO)(4)](infinity)

The heterometallic complex (NH(3))(2)YbFe(CO)(4) was prepared from the reduction of Fe(3)(CO)(12) by Yb in liquid ammonia. Ammonia was displaced from (NH(3))(2)YbFe(CO)(4) by acetonitrile in acetonitrile solution, and the crystalline compounds {[(CH(3)CN)(3)YbFe(CO)(4))](2).CH(3)CN}(infinity) and [(CH(3)CN)(3)YbFe(CO)(4)](infinity) were obtained. An earlier X-ray study of {[(CH(3)CN)(3)YbFe(CO)(4)](2).CH(3)CN}(infinity) showed that it is a ladder polymer with direct Yb-Fe bonds. In the present study, an X-ray crystal structure analysis also showed that [(CH(3)CN)(3)YbFe(CO)(4)](infinity) is a sheetlike array with direct Yb-Fe bonds. Crystal data for {[(CH(3)CN)(3)YbFe(CO)(4)](2).CH(3)CN}(infinity): monoclinic space group P2(1)/c, a = 21.515(8) ?, b = 7.838(2) ?, c = 19.866(6) ?, beta = 105.47(2) degrees, Z = 4. Crystal data for [(CH(3)CN)(3)YbFe(CO)(4)](infinity): monoclinic space group P2(1)/n, a = 8.364(3) ?, b = 9.605(5) ?, c = 17.240(6) ?, beta = 92.22(3) degrees, Z = 4. Electrical conductivity measurements in acetonitrile show that these acetonitrile complexes are partially dissociated into ionic species. IR and NMR spectra of the solutions reveal the presence of [HFe(CO)(4)](-). However, upon recrystallization, the acetonitrile complexes show no evidence for the presence of [HFe(CO)(4)](-) on the basis of their IR spectra. The solid state MAS (2)H NMR spectra of deuterated acetonitrile complexes give no evidence for [(2)HFe(CO)(4)](-). It appears that rupture of the Yb-Fe bond could occur in solution to generate the ion pair [L(n)Yb](2+)[Fe(CO)(4)](2-), but then the highly basic [Fe(CO)(4)](2-) anion could abstract a proton from a coordinated acetonitrile ligand to form [HFe(CO)(4)](-). However, upon crystallization, the proton could be transferred back to the ligand, which results in the neutral polymeric species.     

Heats of formation of Co(CO)(2)NOPR(3), R = CH(3) and C(2)H(5), and its ionic fragments

A joint threshold photoelectron photoion coincidence spectrometry (TPEPICO) and collision-induced dissociation (CID) study on the thermochemistry of Co(CO)(2)NOPR(3), R = CH(3) (Me) and C(2)H(5) (Et), complexes is presented. Adiabatic ionization energies of 7.36 +/- 0.04 and 7.24 +/- 0.04 eV, respectively, were extracted from scans of the total ion and threshold electron signals. In the TPEPICO study, the following 0 K onsets were determined for the various fragment ions: CoCONOPMe(3)(+), 8.30 +/- 0.05 eV; CoNOPMe(3)(+), 9.11 +/- 0.05 eV; CoPMe(3)(+) 10.80 +/- 0.05 eV; CoCONOPEt(3)(+), 8.14 +/- 0.05 eV; CoNOPEt(3)(+), 8.92 +/- 0.05 eV; and CoPEt(3)(+), 10.66 +/- 0.05 eV. These onsets were combined with the Co(+)-PR(3) (R = CH(3) and C(2)H(5)) bond dissociation energies of 2.88 +/- 0.11 and 3.51 +/- 0.17 eV, obtained from the TCID experiments, to derive the heats of formation of the neutral and ionic species. Thus, the Co(CO)(2)NOPR(3) (R = CH(3) and C(2)H(5)) 0 K heats of formation were found to be -350 +/- 13 and -376 +/- 18 kJ x mol(-)(1), respectively. These heats of formation were combined with the published heat of formation of Co(CO)(3)NO to determine the substitution enthalpies of the carbonyl to phosphine substitution reactions. Room-temperature values of the heats of formation are also given using the calculated harmonic vibrational frequencies. Analysis of the TCID experimental results provides indirectly the adiabatic ionization energies of the free phosphine ligands, P(CH(3))(3) and P(C(2)H(5))(3), of 7.83 +/- 0.03 and 7.50 +/- 0.03 eV, respectively.     

Radical cage effects in the photochemical degradation of polymers: effect of radical size and mass on the cage recombination efficiency of radical cage pairs generated photochemically from the (CpCH2CH2N(CH3)C(O)(CH2)nCH3)2Mo2(CO)6 (n = 3, 8, 18) complexes

This study explored the effect of radical size, chain length, and mass on the cage recombination efficiency of photochemically generated radical cage pairs. Radical cage pairs containing long-chain radicals of the type [(CpCH(2)CH(2)N(CH(3))C(O)(CH(2))(n)CH(3))(CO)(3)Mo*, *Mo(CO)(3)(CpCH(2)CH(2)(CH(3))NC(O)(CH(2))(n)CH(3))] were generated in hexanes/squalane solution by photolysis (lambda = 546 nm) of the Mo-Mo bonds in (CpCH(2)CH(2)N(CH(3))C(O)(CH(2))(n)CH(3))(2)Mo(2)(CO)(6) (n = 3, 8, 18). The cage recombination efficiencies (denoted as F(cP), where F(cP) = k(cP)/(k(cP) + k(dP)), k(dP) is the diffusion rate constant, and k(cP) is the radical recombination rate constant) for the radical cage pairs were obtained by extracting them from quantum yield measurements for the photoreactions with CCl(4) (a metal-radical trap) as a function of solvent system viscosity. The results show that F(cP) increases as the length of the chain on a radical center increases. This finding likely provides at least one of the reasons why the quantum yields for photolytic polymer degradation (and long-chain molecules, in general) decrease as the polymer chains get longer. In quantitative terms, plots of k(dP)/k(cP) were linearly proportional to mass(1/2)/radius(2), in agreement with the prediction of Noyes' cage effect theory. The "radius" of a long-chain radical, such as those studied herein, is rather vague, and for that reason a less ambiguous structural parameter was sought to replace the r(2) term in the Noyes expression. Plots of k(dP)/k(cP) vs mass(1/2)/surface area suggest that surface area can be used in place of the radius(2) term in the Noyes expression. The significance of being able to use a particle's surface area in the Noyes expression is that the expression becomes useful for nonspherical particles. The new expression allows the approximate prediction of F(cP) values for radicals of different sizes and masses.     

Zinc diphosphonates templated by organic amines: syntheses and characterizations of [NH3(CH2)2NH3]Zn(hedpH2)2*2H2O and [NH3(CH2)nNH3(CH2)nNH3]Zn2(hedpH)2*2H2O (n=4,5,6) (hedp=1-hydroxyethylidenediphophonate)

Four new zinc diphosphonate compounds with formulas [NH(3)(CH(2))(2)NH(3)]Zn(hedpH(2))(2).2H(2)O, 1, [NH(3)(CH(2))(n)()NH(3)]Zn(2)(hedpH)(2).2H(2)O, (n = 4, 2; n = 5, 3; n = 6, 4) (hedp = 1-hydroxyethylidenediphosphonate) have been synthesized under hydrothermal conditions at 110 degrees C and in the presence of alkylenediamines NH(2)(CH(2))(n)()NH(2) (n = 2, 4, 5, 6). Crystallographic data for 1: monoclinic, space group C2/c, a = 24.7422(15), b = 5.2889(2), c = 16.0338(2) A, beta = 117.903(1) degrees, V = 1856.17(18) A(3), Z = 4; 2: monoclinic, space group P2(1)/n, a = 5.4970(3), b = 12.1041(6), c = 16.2814(12) A, beta = 98.619(5) degrees, V = 1071.07(11) A(3), Z = 2; 3: monoclinic, space group P2(1)/n, a = 5.5251(2), b = 12.5968(3), c = 16.1705(5) A, beta = 99.182(1) degrees, V = 1111.02(6) A(3), Z = 2; 4: triclinic, space group P-1, a = 5.4785(2), b = 14.1940(5), c = 16.0682(6) A, alpha = 81.982(2) degrees, beta = 89.435(2) degrees, gamma = 79.679(2) degrees, V = 1217.11(8) A(3), Z = 2. In compound 1, two of the phosphonate oxygens are protonated. The metal ions are bridged by the hedpH(2)(2-) groups through three of the remaining four phosphonate oxygens, forming a one-dimensional infinite chain. The protonated ethylenediamines locate between the chains in the lattice. In compounds 2-4, only one phosphonate oxygen is protonated. Compounds 2 and 3 have a similar three-dimensional open-network structure composed of [Zn(2)(hedpH)(2)](n) double chains with strong hydrogen bonding interactions between them, thus generating channels along the [100] direction. The protonated diamines and water molecules reside in the channels. Compound 4 contains two types of [Zn(2)(hedpH)(2)](n) double chains which are held together by strong hydrogen bonds, forming a two-dimensional network. The interlayer spaces are occupied by the [NH(3)(CH(2))(6)NH(3)](2+) cations and water molecules. The significant difference between structures 2-4 is also featured by the coordination geometries of the zinc atoms. The geometries of those in 2 can be described as distorted octahedral, and those in 3 as distorted square pyramidal. In 4, two independent zinc atoms are found, each with a distorted octahedral and a tetrahedral geometry, respectively.     

Acceptor (CF3)PCPH pincer reactivity with (PPh3)3Ir(CO)H

The syntheses of Ir(I) and Ir(III) complexes incorporating the electron-withdrawing pincer ligand (1,3-C(6)H(4)(CH(2)P(CF(3))(2))(2)) ((CF(3))PCPH) with (PPh(3))(3)Ir(CO)H and subsequent chemistry are reported. Under ambient conditions, reaction of 1 equiv. (CF(3))PCPH with (PPh(3))(3)Ir(CO)H gave the mono-bridged complex [Ir(CO)(PPh(3))(2)(H)](2)(μ-(CF(3))PCPH) (1). Reaction of (PPh(3))(3)Ir(CO)H with excess (CF(3))PCPH and MeI gave the doubly-bridged complex [Ir(CO)(PPh(3))(H)](2)(μ-(CF(3))PCPH)(2) (2), whereas the tetrameric oligomer [Ir(CO)(PPh(3))(H)](4)(μ-(CF(3))PCPH)(4) (2-sq) was obtained from a 1:1 ligand:metal mixture in benzene in the presence of excess MeI. At higher temperatures (165 °C) the reaction of (CF(3))PCPH with (PPh(3))(3)Ir(CO)H afforded the 5-coordinate Ir(I) complex ((CF(3))PCP)Ir(CO)(PPh(3)) (3). Complex 3 shows mild catalytic activity for the decarbonylation of 2-naphthaldehyde in refluxing diglyme (162 °C).     

Bicyclic phosphines as ligands for cobalt catalysed hydroformylation. Crystal structures of [Co(Phoban[3.3.1]-Q)(CO)(3)](2) (Q = C(2)H(5), C(5)H(11), C(3)H(6)NMe(2), C(6)H(11))

A range of tertiary bicyclic phosphine ligands derived from cis, cis-1,5-cyclooctadiene (Phoban family) was studied by batch autoclave reactions during the hydroformylation of a mixture of linear internal decenes using a cobalt catalyst system. Comparative runs were performed with PBu(3) as representative of standard trialkyl phosphine behaviour. The Phoban ligands comprise of a cyclooctyl bicycle with a mixture of the [3.3.1] and [4.2.1] isomers where the third substituent was systematically varied, Phoban-Q (Q = CH(2)CH(3), (CH(2))(4)CH(3), (CH(2))(9)CH(3), (CH(2))(19)CH(3), (CH(2))(3)N(CH(3))(2), C(6)H(11) and C(6)H(5)). An increase in ligand concentration resulted in a decrease in the reaction rate while the selectivity towards the n-alcohol product increased in accordance with a move from more unmodified catalysis to more modified catalysis. Alcohol yields of 77-85% were obtained at rates of 1.8-2.4 h(-1) for highly modified catalysis. Under highly modified conditions the linearity of the alcohol ranges in a narrow band from approximately 85-90% from Phoban-Ph to Phoban-Cy respectively. Hydrogenation of the alkene substrate varied from approximately 9-15% for Phoban-Ph and Phoban-Cy respectively the least and most electron donating derivatives. The two phosphine isomers were separated for Phoban-C(2) and the hydroformylation activity were re-evaluated for each isomer. The less electron donating [4.2.1] isomer required slightly higher ligand concentrations to achieve fully modified catalysis and gave rates and linearities comparable to the [3.3.1] isomer but giving slightly higher yields due to less hydrogenation of the olefin. In comparison, at fully modified conditions, PBu(3) gave a rate of 0.6 h(-1), alcohol yield of 77%, linearity of 81% and 17% hydrogenation. The crystal structures of the cobalt dimers [Co(CO)(3)(Phoban[3.3.1]-C(2))](2), [Co(CO)(3)(Phoban[3.3.1]-C(5))](2), [Co(CO)(3)(Phoban[3.3.1]-C(3)NMe(2))](2), and [Co(CO)(3)(Phoban[3.3.1]-Cy)](2) have been determined and indicated very similar geometries with Co-Co and Co-P bond distances ranging from 2.6526(10)-2.707(3) and 2.1963(8)-2.2074(9) A respectively. The cone angles of the Phoban ligands were calculated from the crystallographic data, according to the Tolman model, and ranges from 159-165 degrees.     

H3N(CH2)7NH3]8(CH3NH3)2Sn(IV)Sn(II)12I46- a mixed-valent hybrid compound with a uniquely templated defect-perovskite structure

The incorporation of H(3)N(CH(2))(7)NH(3) with CH(3)NH(3)SnI(3) resulted in the formation of a mixed-valent and semiconducting (Eg = 0.84 eV) organic-based perovskite, [H(3)N(CH(2))(7)NH(3)](8)(CH(3)NH(3))(2)Sn(iv)Sn(ii)(12)I(46), with a unique 3D defect-perovskite structure with ordered vacancies at the Sn and I sites.     

(Eta-C5H4R)Fe(CO)2X], X = Cl, Br, I, NO3, CO2Me and [(eta-C5H4R)Fe(CO)3]+, R = (CH2)nCO2Me (n = 0-2), and CO2CH2CH2OH: a new group of CO-releasing molecules

A new group of CO-releasing molecules, CO-RMs, based on cyclopentadienyl iron carbonyls have been identified. X-Ray structures have been determined for [(eta-C(5)H(4)CO(2)Me)Fe(CO)(2)X], X = Cl, Br, I, NO(3), CO(2)Me, [(eta-C(5)H(4)CO(2)Me)Fe(CO)(2)](2), [(eta-C(5)H(4)CO(2)CH(2)CH(2)OH)Fe(CO)(2)](2) and [(eta-C(5)H(4)CO(2)Me)Fe(CO)(3)][FeCl(4)]. Half-lives for CO release, (1)H, (13)C, and (17)OC NMR and IR spectra have been determined along with some biological data for these compounds, [(eta-C(5)H(4)CO(2)CH(2)CH(2)OH)Fe(CO)(3)](+) and [[eta-C(5)H(4)(CH(2))(n)CO(2)Me]Fe(CO)(3)](+), n = 1, 2. More specifically, cytotoxicity assays and inhibition of nitrite formation in stimulated RAW264.7 macrophages are reported for most of the compounds analyzed. [(eta-C(5)H(5))Fe(CO)(2)X], X = Cl, Br, I, were also examined for comparison. Correlations between the half-lives for CO release and spectroscopic parameters are found within each group of compounds, but not between the groups.     

Reactions of (PCP)Ru(CO)(NHPh)(PMe3) (PCP = 2,6-(CH2PtBu2)2C6H3) with substrates that possess polar bonds

The Ru(II) amido complex (PCP)Ru(CO)(PMe(3))(NHPh) (1) (PCP = 2,6-(CH(2)P(t)Bu(2))(2)C(6)H(3)) reacts with compounds that possess polar C=N, C triple bond N, or C=O bonds (e.g., nitriles, carbodiimides, or isocyanates) to produce four-membered heterometallacycles that result from nucleophilic addition of the amido nitrogen to an unsaturated carbon of the organic substrate. Based on studies of the reaction of complex 1 with acetonitrile, the transformations are suggested to proceed by dissociation of trimethylphosphine, followed by coordination of the organic substrate and then intramolecular N-C bond formation. In the presence of ROH (R = H or Me), the fluorinated amidinate complex (PCP)Ru(CO)(N(Ph)C(C(6)F(5))NH) (6) reacts with excess pentafluorobenzonitrile to produce (PCP)Ru(CO)(F)(N(H)C(C(6)F(5))NHPh) (7). The reaction with MeOH also produces o-MeOC(6)F(4)CN (>90%) and p-MeOC(6)F(4)CN (<10%). Details of the solid-state structures of (PCP)Ru(CO)(F)(N(H)C(C(6)F(5))NHPh) (7), (PCP)Ru(CO)[PhNC{NH(hx)}N(hx)] (8), (PCP)Ru(CO){N(Ph)C(NHPh)O} (9), and (PCP)Ru(CO){OC(Ph)N(Ph)} (10) are reported.     

Towards carbohydrate derivatives of the ReI(CO)3 fragment

With the [Re(CO)(3)Br(3)](2-) ion as a precursor for the Re(I)(CO)(3) fragment, the diols (1R,2R)-cyclohexane-1,2-diol [(1R,2R)-Chxd], anhydroerythritol (AnEryt), and (1S,2S)-cyclopentane-1,2-diol [(1S,2S)-Cptd] form dinuclear monoanions in the salts (NBu(4))[(Re(2)(CO)(6){mu-(1R,2R)-ChxdH(-1)}(3)] (1), [K([18]crown-6)][Re(2)(CO)(6)(mu-OMe)(2)(mu-AnErytH(-1))] (2) and (NBu(4))[Re(2)(CO)(6){mu-(1S,2S)-CptdH(-1)}(3)] (3). The monoanionic diolato ligands in these triply bridged dirhenates(I) are monodentate. Bridging triolato ligation in the trirhenates(I) is supported by the anions of glycerol (Glyc) and methyl beta-D-ribopyranoside (Me-beta-D-Ribp), the latter binding in its (1)C(4) conformation, in (DBUH)(2)[Re(3)(CO)(9)(mu(3)-O)(mu(3)-GlycH(-3))]0.5 MeCN (4 a), (NEt(4))[Re(3)(CO)(9)(mu(3)-OMe)(mu(3)-GlycH(-3))] (4 b) and (DBUH)[Re(3)(CO)(9)(mu(3)-OMe)(mu(3)-(1)C(4)-Me-beta-D-Ribp2,3,4H(-3))] (5). The chiral sugar alcohols L-threitol (L-Thre) and D-arabitol (D-Arab) act as tetra- and pentadentate ligands, respectively, in (NEt(4))[Re(2)(CO)(6)(L-ThreH(-3))]MeCN (6) and (NEt(4))(2)(DBUH)(2)[Re(6)(CO)(18)(D-ArabH(-5))(2)] (7). Complexes 6 and 7 are free of supporting oxo or methoxo ligands and use solely the O-atom pattern of the polyol for the connection of the Re(I)(CO)(3) moieties.     

Isolation of (CO)1- and (CO2)1- radical complexes of rare earths via Ln(NR2)3/K reduction and [K2(18-crown-6)2]2+ oligomerization

Deep-blue solutions of Y(2+) formed from Y(NR(2))(3) (R = SiMe(3)) and excess potassium in the presence of 18-crown-6 at -45 °C under vacuum in diethyl ether react with CO at -78 °C to form colorless crystals of the (CO)(1-) radical complex, {[(R(2)N)(3)Y(μ-CO)(2)][K(2)(18-crown-6)(2)]}(n), 1. The polymeric structure contains trigonal bipyramidal [(R(2)N)(3)Y(μ-CO)(2)](2-) units with axial (CO)(1-) ligands linked by [K(2)(18-crown-6)(2)](2+) dications. Byproducts such as the ynediolate, [(R(2)N)(3)Y](2)(μ-OC≡CO){[K(18-crown-6)](2)(18-crown-6)}, 2, in which two (CO)(1-) anions are coupled to form (OC≡CO)(2-), and the insertion/rearrangement product, {(R(2)N)(2)Y[OC(═CH(2))Si(Me(2))NSiMe(3)]}[K(18-crown-6)], 3, are common in these reactions that give variable results depending on the specific reaction conditions. The CO reduction in the presence of THF forms a solvated variant of 2, the ynediolate [(R(2)N)(3)Y](2)(μ-OC≡CO)[K(18-crown-6)(THF)(2)](2), 2a. CO(2) reacts analogously with Y(2+) to form the (CO(2))(1-) radical complex, {[(R(2)N)(3)Y(μ-CO(2))(2)][K(2)(18-crown-6)(2)]}(n), 4, that has a structure similar to that of 1. Analogous (CO)(1-) and (OC≡CO)(2-) complexes of lutetium were isolated using Lu(NR(2))(3)/K/18-crown-6: {[(R(2)N)(3)Lu(μ-CO)(2)][K(2)(18-crown-6)(2)]}(n), 5, [(R(2)N)(3)Lu](2)(μ-OC≡CO){[K(18-crown-6)](2)(18-crown-6)}, 6, and [(R(2)N)(3)Lu](2)(μ-OC≡CO)[K(18-crown-6)(Et(2)O)(2)](2), 6a.     

Delta(DeltaS) and Delta(DeltaS) for the competing bond cleavage reactions in (CH3CN)(ROH)H+ [R = CH3, C2H5, C3H7, (CH3)2CH

Microcanonical variational transition-state theory was used to determine the entropies of activation for hydrogen-bond cleavage reactions leading to CH(3)CN + ROH(2)(+) in a series of acetonitrile-alcohol proton-bound pairs (CH(3)CN)(ROH)H(+) (where R = CH(3), CH(3)CH(2), CH(3)CH(2)CH(2), and (CH(3))(2)CH). In each case, the dissociation potential surface was modelled at the MP2/6-31 + G(d) level of theory. The dissociating configurations having the minimum sums-of-states were identified in each case and the resulting entropies of activation were calculated. Combined with previous work on the competing reaction leading to CH(3)CNH(+) + ROH, the results permitted the determination of the Delta(DeltaS) in each proton-bound pair. For the (CH(3)CN)(CH(3)OH)H(+) and (CH(3)CN)(CH(3)CH(2)OH)H(+) proton-bound pairs, the entropies of activation for the two dissociating channels are essentially the same [i.e., Delta(DeltaS) = 0], while Delta(DeltaS) for the propanol-containing pairs ranged between 40 and 45 J K(-1) mol(-1). The latter non-zero values are due to a combination of the location of the dividing surface in each dissociation and the rapidity with the frequencies of the vanishing vibrational modes go to zero as they are converted to product translations and rotations during the dissociation.     

Synthesis of triamidoamine ligands of the type (ArylNHCH(2)CH(2))(3)N and molybdenum and tungsten complexes that contain an [ArylNCH(2)CH(2))(3)N]3- ligand

Aryl bromides react with (H(2)NCH(2)CH(2))(3)N in a reaction catalyzed by Pd(2)(dba)(3) in the presence of BINAP and NaO-t-Bu to give the arylated derivatives (ArylNHCH(2)CH(2))(3)N [Aryl = C(6)H(5) (1a), 4-FC(6)H(4) (1b), 4-t-BuC(6)H(4) (1c), 3,5-Me(2)C(6)H(3) (1d), 3,5-Ph(2)C(6)H(3) (1e), 3,5-(4-t-BuC(6)H(4))(2)C(6)H(3) (1f), 2-MeC(6)H(4) (1g), 2,4,6-Me(3)C(6)H(2) (1h)]. Reactions between (ArNHCH(2)CH(2))(3)N (Ar = C(6)H(5), 4-FC(6)H(4), 3,5-Me(2)C(6)H(3), and 3,5-Ph(2)C(6)H(3)) and Mo(NMe(2))(4) in toluene at 70 degrees C lead to [(ArNHCH(2)CH(2))(3)N]Mo(NMe(2)) complexes in yields ranging from 64 to 96%. Dimethylamido species (Ar = 4-FC(6)H(4), 3,5-Me(2)C(6)H(3)) could be converted into paramagnetic [(ArNHCH(2)CH(2))(3)N]MoCl species by treating them with 2,6-lutidinium chloride in tetrahydrofuran (THF). The "direct reaction" between 1a-f and MoCl(4)(THF)(2) in THF followed by 3 equiv of MeMgCl yielded [(ArNHCH(2)CH(2))(3)N]MoCl species (3a-f) in high yield. If 4 equiv of LiMe instead of MeMgCl are employed in the direct reaction, then [(ArNHCH(2)CH(2))(3)N]MoMe species are formed. Tungsten species, [(ArNHCH(2)CH(2))(3)N]WCl, could be prepared by analogous "direct" methods. Cyclic voltammetric studies reveal that MoCl complexes become more difficult to reduce as the electron donating ability of the [ArylNCH(2)CH(2))(3)N]3- ligand increases, and the reductions become less reversible, consistent with ready loss of chloride from ([(ArNHCH(2)CH(2))(3)N]MoCl)(-). Tungsten complexes are more difficult to reduce, and reductions are irreversible on the CV time scale.     

Syntheses and Properties of New Layered Alkali-Metal/Ammonium Vanadium(V) Methylphosphonates: M(VO(2))(3)(PO(3)CH(3))(2) (M = NH(4), K, Rb, Tl). Single-Crystal Structures of K(VO(2))(3)(PO(3)CH(3))(2) and NH(4)(VO(2))(3)(PO(3)CH(3))(2)

The hydrothermal syntheses of a family of new alkali-metal/ammonium vanadium(V) methylphosphonates, M(VO(2))(3)(PO(3)CH(3))(2) (M = K, NH(4), Rb, Tl), are described. The crystal structures of K(VO(2))(3)(PO(3)CH(3))(2) and NH(4)(VO(2))(3)(PO(3)CH(3))(2) have been determined from single-crystal X-ray data. Crystal data: K(VO(2))(3)(PO(3)CH(3))(2), M(r) = 475.93, trigonal, R32 (No. 155), a = 7.139(3) ?, c = 19.109(5) ?, Z = 3; NH(4)(VO(2))(3)(PO(3)CH(3))(2), M(r) = 454.87, trigonal, R32 (No. 155), a = 7.150(3) ?, c = 19.459(5) ?, Z = 3. These isostructural, noncentrosymmetric phases are built up from hexagonal tungsten oxide (HTO) like sheets of vertex-sharing VO(6) octahedra, capped on both sides of the V/O sheets by PCH(3) entities (as [PO(3)CH(3)](2-) methylphosphonate groups). In both phases, the vanadium octahedra display a distinctive two short + two intermediate + two long V-O bond distance distribution within the VO(6) unit. Interlayer potassium or ammonium cations provide charge balance for the anionic (VO(2))(3)(PO(3)CH(3))(2) sheets. Powder X-ray, TGA, IR, and Raman data for these phases are reported and discussed. The structures of K(VO(2))(3)(PO(3)CH(3))(2) and NH(4)(VO(2))(3)(PO(3)CH(3))(2) are compared and contrasted with related layered phases based on the HTO motif.     

Dithiolate complexes of manganese and rhenium: X-ray structure and properties of an unusual mixed valence cluster Mn3(CO)6(mu-eta2-SCH2CH2CH2S)3

Treatment of Mn(2)(CO)(10) with 3,4-toluenedithiol and 1,2-ethanedithiol in the presence of Me(3)NO.2H(2)O in CH(2)Cl(2) at room temperature afforded the dinuclear complexes Mn(2)(CO)(6)(mu-eta(4)-SC(6)H(3)(CH(3))S-SC(6)H(3)(CH(3))S) (1), and Mn(2)(CO)(6)(mu-eta(4)-SCH(2)CH(2)S-SCH(2)CH(2)S) (2), respectively. Similar reactions of Re(2)(CO)(10) with 3,4-toluenedithiol, 1,2-benzenedithiol, and 1,2-ethanedithiol yielded the dirhenium complexes Re(2)(CO)(6)(mu-eta(4)-SC(6)H(3)(CH(3))S-SC(6)H(3)(CH(3))S) (3), Re(2)(CO)(6)(mu-eta(4)-SC(6)H(4)S-SC(6)H(4)S) (4), and Re(2)(CO)(6)(SCH(2)CH(2)S-SCH(2)CH(2)S) (5), respectively. In contrast, treatment of Mn(2)(CO)(10) with 1,3-propanedithiol afforded the trimanganese compound Mn(3)(CO)(6)(mu-eta(2)-SCH(2)CH(2)CH(2)S)(3) (6), whereas Re(2)(CO)(10) gave only intractable materials. The molecular structures of 1, 3, and 6 have been determined by single-crystal X-ray diffraction studies. The dimanganese and dirhenium carbonyl compounds 1-5contain a binucleating disulfide ligand, formed by interligand disulfide bond formation between two dithiolate ligands identical in structure to that of the previously reported dimanganese complex Mn(2)(CO)(6)(mu-eta(4)-SC(6)H(4)S-SC(6)H(4)S). Complex 6, on the other hand, forms a unique example of a mixed-valence trimangenese carbonyl compound containing three bridging 1,3-propanedithiolate ligands. The solution properties of 6 have been investigated by UV-vis and EPR spectroscopies as well as electrochemical techniques.     

(CH3)2NH(CH2)2NH(CH3)2][(UO2)2F2(HPO4)2]: a new organically templated layered uranium phosphate fluoride--synthesis, structure, characterization, and ion-exchange reactions

A new organically templated layered uranium phosphate fluoride, [(CH(3))(2)NH(CH(2))(2)NH(CH(3))(2)][(UO(2))(2)F(2)(HPO(4))(2)] has been synthesized by hydrothermal reaction of UO(3), H(3)PO(4), HF, and (CH(3))(2)NCH(2)CH(2)N(CH(3))(2) at 140 degrees C. [(CH(3))(2)NH(CH(2))(2)NH(CH(3))(2)][(UO(2))(2)F(2)(HPO(4))(2)] has a layered crystal structure consisting of seven-coordinated UO(5)F(2) pentagonal bipyramids and four-coordinated HPO(4) tetrahedra. Each anionic layer containing three-, four-, and six-membered rings is separated by [(CH(3))(2)NH(CH(2))(2)NH(CH(3))(2)](2+) cations. The [(CH(3))(2)NH(CH(2))(2)NH(CH(3))(2)](2+) cations may be readily exchanged with the M(2+) ions (M = Ba, Sr and Ca) in water to give high crystalline AE(UO(2))(2)(PO(4))(2).6H(2)O (AE = Ca, Sr, Ba).     

Reactions of thioethers with Mn(2)(CO)(7)(mu-S(2)) proceed with CO displacement and insertion of the sulfur atom into the Mn-Mn bond

The reaction of Mn(2)(CO)(7)(mu-S(2)) (2) with SMe(2) yielded the new complexes Mn(2)(CO)(6)(mu-S(2))(mu-SMe(2)) (3) and Mn(4)(CO)(14)(SMe(2))(mu(3)-S(2))(mu(4)-S(2)) (4) in 18 and 41% yields, respectively. The reaction of 2 with the cyclic thioether thietane SCH(2)CH(2)CH(2) yielded the new complexes Mn(2)(CO)(6)(mu-S(2))(mu-SCH(2)CH(2)CH(2)) (5) and Mn(4)(CO)(14)(SCH(2)CH(2)CH(2))(mu(3)-S(2))(mu(4)-S(2)) (6) in 12 and 52% yields, respectively, and the reaction of 2 with 1,4,9-trithiacyclododecane (12S3) yielded Mn(2)(CO)(6)(mu-12S3)(mu-S(2)) (7) and Mn(4)(CO)(14)(12S3)(mu(3)-S(2))(mu(4)-S(2)) (8) in 8 and 24% yields, respectively. Compounds 3 and 5-7 were characterized crystallographically. Compounds 3, 5, and 7 have similar structures in which the thioether ligand has replaced the bridging carbonyl ligand of 2 and its sulfur atom has been inserted into the manganese-manganese bond. The two manganese atoms are not mutually bonded, and two Mn(CO)(3) groups are held together through the bridging disulfido ligand and the bridging sulfur atom of the thioether ligand. Compound 6 contains a Mn(4)(mu(3)-S(2))(mu(4)-S(2)) moiety without metal-metal bonds. On the basis of spectroscopic data, compounds 4 and 8 are believed to have similar structures.