Polymerization of methyl methacrylate with ceric ion-methanol redox system

The polymerization of methyl methacrylate initiated by Ce⁴⁺ methanol redox system was studied in aqueous solution of nitric acid at 15°C. The polymerization was initiated by primary radicals formed from Ce⁴⁺/alcohol complex. Poly(methyl methacrylate) chains containing the alcohol residue were obtained. Variations in the temperatuare and concentration of the components of the redox system allowed the control of the rate of polymerization and molecular weight of the polymer. The concentration of the hydroxyl end groups in the poly(methyl methacrylate) of low molecular weight was determined by titration and by spectrometric method.     

Polymerization of methyl methacrylate using a metallocene catalyst system

Methyl methacrylate was polymerized with Cp₂YCl(THF) or IVB group metallocene compounds (i.e., Cp₂ZrCl₂ and Cp₂HfCl₂, etc.), in the presence of a Lewis acid like Zn(C₂H₅)₂. The Lewis acid was complexed with methyl methacrylate, which avoided the metallocene compounds being poisoned with a functional group. A living polymerization was promoted through the use of metallocene/MAO/Zn(C₂H₅)₂, which gave tactic poly(methyl methacrylate) with a high molecular weight. The polymer yield increases with polymerization time, which indicates that the propagation rate is zero in order in the concentration of the monomer. The polymer yield increases also with the concentration of Cp₂YCl(THF), which indicates the yttrocene to be the real catalyst. When the polymerization temperature exceeds room temperature, the poly(methyl methacrylate) cannot be synthesized by the Cp₂YCl(THF) catalyst. When the reaction temperature reachs −60 °C, the poly(methyl methacrylate) is high syndiotatic and molecular weight by the Cp₂YCl(THF)/MAO catalyst system. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1184–1194, 2000     

Effect of Glycerol in the Polymerization of Methyl Methacrylate by Mn(III) Acetate

The kinetics of the mechanism of the polymerization of methyl methacrylate initiated by the glycerol/Mn(III) acetate redox system has been investigated in aqueous sulfuric acid medium in the temperature range of 40 to 50 °C. The effects of glycerol, methyl methacrylate, metal ion, acetic acid, and sulfuric acid on the rates of polymerization have been studied. One striking observation is that the increase in monomer concentration steadily decreases the rate of polymerization, contrary to what was observed in the case of acrylonitrile. On the basis of these observations, an appropriate kinetic scheme and rate expression have been developed.     

Atom transfer radical polymerization of styrene and methyl methacrylate catalyzed by FeCl2/iminodiacetic acid

The atom transfer radical polymerization of styrene and methyl methacrylate with FeCl₂/iminodiacetic acid as the catalyst system in bulk was successfully implemented at 70 and 110 °C, respectively. The polymerization was controlled: the molecular weight of the resultant polymer was close to the calculated value, and the molecular weight distribution was relatively narrow (weight‐average molecular weight/number‐average molecular weight ∼ 1.5). Block copolymers of polystyrene‐b‐poly(methyl methacrylate) and poly(methyl methacrylate)‐b‐poly(methyl acrylate) were successfully synthesized, confirming the living nature of the polymerization. A small amount of water added to the reaction system increased the reaction rate and did not affect the living nature of the polymerization system. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4308–4314, 2000     

3-Tetrahydrofurfuryloxy-2-Hydroxypropyl Methacrylate: Synthesis,Characterization, Homopolymerization,and Copolymerization

Abstract

3-Tetrahydrofurfuryloxy-2-hydroxypropyl methacrylate monomer was prepared from methacrylic acid, tetrahydrofurfuryl alchol, and epichlorhydrin. Homopolymerization and copolymerization with (2-phenyl-1,3-dioxolane-4-yl)methyl methacrylate and N-vinyl pyrrolidone monomers were carried out in 1,4-dioxane solution at 60°C using benzoyl peroxide as initiator. Infrared, proton and carbon-13 nuclear magnetic resonance techniques were used in characterizations of the monomer, the homopolymer and the copolymers were determined by DSC technique. The copolymer compositions were estimated from 1H-NMR spectra. The reactivity ratios in copolymerization of 3-tetrahydrofurfuryloxy-2-hydroxypropyl methacrylate and (2-phenyl-1,3-dioxolane-4-yl) methyl methacrylate were calculated by both Kelen-Tüdos and Fineman-Ross methods.     

Synthesis of double hydrophilic graft copolymer containing poly(ethylene glycol) and poly(methacrylic acid) side chains via successive ATRP

A well‐defined double hydrophilic graft copolymer, with polyacrylate as backbone, hydrophilic poly(ethylene glycol) and poly(methacrylic acid) as side chains, was synthesized via successive atom transfer radical polymerization followed by the selective hydrolysis of poly(methoxymethyl methacrylate) side chains. The grafting‐through strategy was first used to prepare poly[poly(ethylene glycol) methyl ether acrylate] comb copolymer. The obtained comb copolymer was transformed into macroinitiator by reacting with lithium diisopropylamine and 2‐bromopropionyl chloride. Afterwards, grafting‐from route was employed for the synthesis of poly[poly(ethylene glycol) methyl ether acrylate]‐g‐poly(methoxymethyl methacrylate) amphiphilic graft copolymer. The molecular weight distribution of this amphiphilic graft copolymer was narrow. Poly(methoxymethyl methacrylate) side chains were connected to polyacrylate backbone through stable C? C bonds instead of ester connections. The final product, poly[poly(ethylene glycol) methyl ether acrylate]‐g‐poly(methacrylate acid), was obtained by selective hydrolysis of poly(methoxymethyl methacrylate) side chains under mild conditions without affecting the polyacrylate backbone. This double hydrophilic graft copolymer was found be stimuli‐responsive to pH and ionic strength. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4056–4069, 2008     

Initiation of polymerization of methyl methacrylate by oxalic acid and iron(III) mixtures

The polymerization of methyl methacrylate either by free radical or charge transfer mechanism has been studied in dimethyl sulphoxide at 60° in the presence of oxalic acid and hexakis dimethylsulphoxide iron(III) perchlorate, [Fe(DMSO)₆](ClO₄)₃. Increased rate was noticed for 1:1 mole ratio of oxalic acid to Fe³⁺ for charge transfer polymerization; a well defined induction period was found for free radical polymerization in the same systems. Mechanisms for the two types of reaction are proposed. The rate constant for the interaction of poly(methyl methacrylate) radical with the iron-oxalate complex was found to be 1.52 × 10⁵ l. mol^?1 sec^?1 at 60°.     

Thermal degradation of butyl acrylate-methyl acrylate-acrylic acid-copolymers

The thermal degradation of copolymers based on butyl acrylate-methyl acrylate-acrylic acid used as acrylic pressure-sensitive adhesives, especially for bonding of plasticizer containing materials, has been investigated using thermogravimetry and pyrolysis-gas chromatography at 250°C. It was observed that during the pyrolysis of butyl acrylate-methyl acrylate-acrylic acid copolymers unsaturated monomers as methyl acrylate, methyl methacrylate, butyl acrylate and butyl methacrylate were formed. During the side-chain butyl acrylate-methyl-acrylate-acrylic acid-copolymer degradation the presence of methyl alcohol and butyl alcohol was observed.     

SYNTHESIS OF MACROMONOMER USING END FUNCTIONAL POLYSTYRENE PREPARED FROM p-METHOXYBENZYL p-TRIMETHYL-SILYLPHENYL SELENIDE AS A PHOTOINIFERTER

The end functional polystyrene having phenylseleno group at ω-chain end was prepared from radical polymerization of styrene in the presence of p-methoxybenzyl p-trimethylsilylphenyl selenide as a photoiniferter. The phenylseleno group at ω-chain end in polystyrene was eliminated by hydrogen peroxide. The resulting polystyrene was interconverted quantitatively to polystyrene having epoxy end group by the oxidation with m-chloroperbenzoic acid. The macromonomer having a meth-acryloyl end group was synthesized from polystyrene containing epoxy end group with methacrylic acid in xylene at 140°C. Copolymerization of this macromonomer with methyl methacrylate afforded effectively a graft copolymer composed of a poly-(methyl methacrylate) backbone and polystyrene branches.     

Block copolymers of thiophene-capped poly(methyl methacrylate) with pyrrole

Poly(methyl methacrylate) with a thiophene end group having narrow polydispersity was prepared by the Atom Transfer Radical Polymerization (ATRP) technique. Subsequently, electrically conducting block copolymers of thiophene-capped poly(methyl methacrylate) with pyrrole were synthesized by using p-toluene sulfonic acid and sodium dodecyl sulfate as the supporting electrolytes via constant potential electrolysis. Characterization of the block copolymers were performed by CV, FTIR, SEM, TGA, and DSC analyses. Electrical conductivities were evaluated by the four-probe technique. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4218–4225, 1999     

Synthesis,surface accumulation,and micellar properties of amphiphilic block copolymers

Amphiphilic block copolymers, i.e., poly(methyl methacrylate)-b-poly(2-dimethylethylammoniumethyl methacrylate), were synthesized by the reaction between two prepolymers. Carboxyl-terminated poly(methyl methacrylate) and hydroxyl-terminated poly(2-dimethylaminoethyl methacrylate) were prepared by radical polymerization of the corresponding monomers in the presence of thioglycolic acid and 2-mercaptoethanol as a chain transfer agent, respectively. Two condensation methods, i.e., DCC and the acid chloride method, were used for the reactions of these prepolymers. The subsequent quarternization produced the amphiphilic block copolymers. Surface property of poly(methyl methacrylate) films containing this amphiphilic block copolymer was examined by measuring contact angles for water. The addition of only 0.5 wt% of the block copolymer was sufficient to make poly(methyl methacrylate) surfaces hydrophilic. The block copolymer formed a polymeric micelle in acetone–water mixed solvent.     

Silica nanoparticle covered with mixed polymer brushes as Janus particles at water/oil interface

Silica nanoparticles (NSiO₂) are modified with mixed polymer brushes derived from a block copolymer precursor, poly(methyl methacrylate)-b-poly(glycidyl methacrylate)-b-poly(tert-butyl methacrylate) with short middle segment of PGMA, through one step ??grafting-onto?? approach. The block polymer precursors are prepared via reversible addition?Cfragmentation chain transfer-based polymerization of methyl methacrylate, glycidyl methacrylate, and tert-butyl methacrylate. The grafting is achieved by the reaction of epoxy group in short PGMA segment with silanol functionality of silica. After hydrolysis of poly(tert-butyl methacrylate) segment, amphiphilic NSiO₂ with ??V-shaped?? polymer brushes possessing exact 1:1 molar ratio of different arms were prepared. The functionalized particles self-assemble at oil/water interfaces to form stable large droplets with average diameter ranging from 0.15?±?0.06 to 2.6?±?0.75?mm. The amphiphilicity of the particles can be finely tuned by changing the relative lengths of poly(methyl methacrylate) and poly(methacrylic acid) segments, resulting in different assembly behavior. The method may serve as a general way to control the surface property of the particles.     

ESR spectra of poly(methacrylic acid) and poly(methyl methacrylate): Reinterpretation of the 9-line spectrum

The temperature dependence of the ESR spectra of poly(methacrylic acid) and poly-(methyl methacrylate) γ-irradiated at room temperature was studied between ?196°C and +25°C. The conventional 9-line spectrum was observed throughout this range with no significant spectral change, in contrast to the propagating radical ··· CH₂? °C(CH₃)COOR found in methacrylic acid monomer or barium methacrylate dihydrate irradiated at ?196°C. In addition, the irradiation of methacrylic acid monomer with a low dose at 0°C gave the same 13-line spectrum as that of the propagating radical obtained by the irradiation at ?196°C, while prolonged irradiation at 0°C gave the same conventional 9-line spectrum as that of poly(methacrylic acid) or poly(methyl methacrylate). The conventional 9-line spectrum has a much weaker 4-line component than that of the propagating radical. The difference comes from the surrounding matrix, and the conventional 9-line spectrum is well interpreted by introducing the concept of the distribution of the conformational angle in the irregular polymer matrix. From simulation of the ESR spectrum, it was found that the intensity of the 4-line component is very sensitive to the distribution, and that the observed 9-line spectrum is well reproduced assuming a Gaussian distribution (half-height width of 5–6°) around the most probable conformation which is nearly the same as that of the propagating radical, where the conformational angles of the two C? H_β bonds to the half-filled p-orbital are 55° and 65°.     

Synthesis and characterization of nano-sized poly[(butyl acrylate)-co-(methyl methacrylate)-co-(methacrylic acid)] latex via differential microemulsion polymerization

Poly[(butyl acrylate)-co-(methyl methacrylate)-co-(methacrylic acid)] latex particles were synthesized via differential microemulsion polymerization. The effect of initiator type and methacrylic acid incorporation were investigated. The initiator type could significantly affect the particle size and the molecular weight of the resulting polymer and 2,2′-azobisisobutyronitrile produced the smallest particle size. The incorporation of methyl methacrylate (MAA) in the copolymer and terpolymer structures was confirmed by FTIR and NMR spectroscopy, and DSC in that the carbonyl peak of carboxylic acid at 1,700 cm^?1 in the FTIR spectrum was observed when the MAA amount was high enough, the peak areas at 0.9 ppm in the NMR spectrum confirmed the participation of MAA from the increasing proton signals and the glass transition temperature and polarity of the polymer increased when the MAA amount was increased. This supported that the MAA was incorporated into the polymer chains. MAA was found to produce a vitrification effect during the polymerization.     

Reverse atom transfer radical polymerization of methyl methacrylate with a new catalytic system,FeCl3/isophthalic acid

A new catalytic system, FeCl₃/isophthalic acid, was successfully used in the reverse atom transfer radical polymerization (RATRP) of methyl methacrylate (MMA) in the presence of a conventional radical initiator, 2,2′‐azo‐bis‐isobutyrontrile. Well‐defined poly(methyl methacrylate) (PMMA) was synthesized in an N,N‐dimethylformamide solvent at 90–120 °C. The polymerization was controlled up to a molecular weight of 50,000, and the polydispersity index was 1.4. Chain extension was performed to confirm the living nature of the polymer. The kinetics of the RATRP of MMA with FeCl₃/isophthalic acid as the catalyst system was investigated. The apparent activation energy was 10.47 kcal/mol. The presence of the end chloride atom on the resulting PMMA was demonstrated by ¹H NMR spectroscopy. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 765–774, 2001     

Adhesion of methyl methacrylate copolymers to silicate glass

Adhesion of methyl methacrylate copolymers with acrylic acid, methacrylic acid, and methacrylamide to silicate glass was studied. The copolymers of methyl methacrylate with acrylic and methacrylic acids, compared to poly(methyl methacrylate), are characterized by higher adhesion strength of polymer fi lm-silicate glass joints.     

Radical polymerization of vinyl monomers initiated by a mono-captodatively substituted ethane

Homopolymerization of styrene and methyl methacrylate was carried out at 60–130°C in the presence of a mono-captodatively (cd) substituted ethane bearing nitrile and ethylsulfenyl substituents on the same carbon atom. It was found that the cd-ethane accelerated both styrene and methyl methacrylate polymerizations with no induction period, but the polymerization mode of methyl methacrylate was different from that of styrene. The polymerization rate of styrene was proportional to the 0.46th power of the cd-ethane concentration. However, the cd-ethane produced a reversible radical termination in the case of methyl methacrylate. The mechanism of both polymerizations is discussed in terms of the kinetic and ESR data. © 1996 John Wiley & Sons, Inc.     

Preparation of novel alkaline pH‐responsive copolymers for the formation of recyclable aqueous two‐phase systems and their application in the extraction of lincomycin

Aqueous two‐phase systems have potential industrial application in bioseparation and biocatalysis engineering; however, their practical application is limited primarily because the copolymers involved in the formation of aqueous two‐phase systems cannot be recovered. In this study, two novel alkaline pH‐responsive copolymers were synthesized and examined for the extraction of lincomycin. The two copolymers could form a novel alkaline aqueous two‐phase systems when their concentrations were both 6% w/w and the pH was 8.4(±0.1)–8.7(±0.1). One copolymer was synthesized using acrylic acid, 2‐(dimethylamino)ethyl methacrylate, and butyl methacrylate as monomers. Moreover, 98.8% of the copolymer could be recovered by adjusting the solution pH to its isoelectric point (pH 6.29). The other copolymer was synthesized using the monomers methacrylic acid, 2‐(dimethylamino)ethyl methacrylate, and methyl methacrylate. In this case, 96.7% of the copolymer could be recovered by adjusting the solution pH to 7.19. The optimal partition coefficient of lincomycin was 0.17 at 30°C in the presence of 10 mM KBr and 5.5 at 40°C in the presence of 80 mM Ti(SO₄)₂ using the novel alkaline aqueous two‐phase systems.     

Improvement of the thermal stability of cluster‐crosslinked polystyrene and poly(methyl methacrylate) by optimization of the polymerization conditions

The polymerization conditions for polystyrene and poly(methyl methacrylate) crosslinked by 0.5 mol % of the cluster Zr₆O₄(OH)₄(methacrylate)₁₂ were optimized by applying a step polymerization procedure. The onset of thermal decomposition was thus increased up to about 50° for polystyrene and about 110° for poly(methyl methacrylate). The increase in thermal stability correlated with a higher char yield. The glass transition temperatures were also increased by about 15°. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6586–6591, 2005     

An unusual reaction polymerization in nitric acid medium

We are investigating an unusual reaction that occurs when methyl methacrylate (MMA) is kept in contact with concentrated nitric acid¹ (65% HNO₃, sp. gr. 1.41). Polymer of high molecular weight is formed, showing about one unit of methacrylic acid (MAA) per unit of MMA, when equilibrium is reached. The reaction depends on the temperature, the molar ratio MMA:HNO₃, and the reaction time. Although we also found polymer at temperatures in the range 50–70°C,² in this paper we only report the results when the temperature was kept between 25 and 40°C. Methacrylic acid (MAA) was found to homopolymerize under those mild conditions; its behavior was investigated. Although we also observed that polymer is formed with sulfuric acid (96%) and that acrylic acid polymerizes with both nitric and sulfuric acid at 20–30°C, we are limiting this article to the observed polymerizing action of nitric acid on methyl methacrylate and on methacrylic acid. Work proceeds on this matter in this laboratory.