环形光栅光学扫描全息术的研究

为了充分利用光学扫描全息系统的分辨率,提出了用环形光栅扫描物体的光学扫描全是术。其优点是：可以用非相干光源记录扫描全息图,系统为单光路,从而可以提高系统的稳定性。阐明了环形光栅光学扫描全息术的基本原理,并给出了实验结果。     

记录X光全息图的新设想

X光全息术是一个两步成像过程,第一步是含有物体信息的物束和参考束重叠并产生干涉记录在全息图上,第二步是用光学或数字方法完整地重现这个信息.然而自1948年Gabor发明全息术以来,尽管光学全息和电子全息获得了迅猛的发展,X光全息术却进展缓慢.80年代中期,Brookhaven实验室将Undulator等插入件引入到同步辐射源中,使X射线源的亮度比70年代末提高8～12量级;几乎是同期,美国Lawrence Livemore国家实验室成功地     

三维面形测量数据的计算全息可视化

提出利用计算机制全息进行三维面形测量数据立体重现的技术。首先利用三维面形测量技术同时获取三维物体的强度和距离像；然后根据三维面形测量数据，设计和制作菲涅耳计算全息图；最后将计算全息和光学全息相结合，以菲涅耳计算全息图的光学再现像为对象，记录光学像全息。这样既解决了计算机制全息术中真实三维物体立体信息数据捕捉的问题，又为三维面形检测提供了一个行之有效的立体重构技术。给出了这种方法的原理、计算全息的设计、制作方案和实验验证结果。     

光学扫描全息术的推广

给出了光学扫描全息术的基本原理。记录时用实时 FZP与物体强度透射率发生卷积从而产生扫描全息图 ;再现时用与记录时相对应的 FZP与全息图信号发生卷积即可再现出物体的信息。推广了光学扫描全息术 ,提出只要某一实时的光场强度分布函数具有如下性质 :(l)该函数中含有 x,y,z参量且相对于 z参量具有圆对称性 ;(2 )对于某一确定的 z参量 ,该函数的自相关是δ函数 ,就可以把该光场作为光学扫描全息术中的照明光场对物体进行扫描记录以得到扫描全息图。     

基于菲涅耳波带板扫描全息术的光学层析成像

基于光学扫描全息术原理和编码孔径层析成像技术,提出了一种三维物体层析成像技术——菲涅耳波带板扫描全息术。该技术通过将物体的光强分布函数与菲涅耳波带板的光强分布函数进行卷积运算来得到物体的扫描全息图,通过相关解卷积的方法来进行扫描全息图的数字重建。依据该技术原理设计了实验系统,系统结构简单紧凑,具有三维物体层析成像功能。提出用数字高通滤波器来减少重建图像的背景噪声。计算机仿真及对实物的扫描记录和重建实验结果表明,该技术原理正确,用于三维物体层析成像是可行的,用数字高通滤波的方法提高重建图像的对比度是有效的。     

三维漫射体单波长真彩色彩虹全息术

提出一种新的三维漫反射物体真彩色彩虹全息术,在普通一步法真彩色彩虹全息术的基础上,用单波长激光逆光路再现,可在同一种记录介质上一次曝光记录三维物体的真彩色全息图.因而特别适合于制作光致抗蚀剂模压全息母板.     

复合扫描全息术及透过强散射介质三维成像研究

应用菲涅耳波带片光学扫描全息术原理，研究强散射介质中吸收体的三维成像.针对由成像物体强散射背景产生的背景噪音，提出复合扫描全息术成像方法.实验中应用这一方法，对嵌埋在浓度为1%，深度为1.7 cm的脂肪乳剂中的吸收体成像，得到了信噪比和对比度较好的再现像.在此基础上，对复合扫描全息成像系统的信噪比，对比度及分辨率等性能进行了深入的理论分析和实验测试.研究表明，与单一模式相比，复合扫描全息术在信噪比和对比度方面有较大改善，但分辨率还需进一步提高.     

多模式光学数字全息实验教学系统

研究设计了一种多模式现代光学数字全息成像实验教学系统.该系统可通过多光路模式与CcD技术相结合建立并记录数字全息图频率场,采用不同数学算法和程序实现全息图的全数字化重构再现与图像的三维测量,并通过界面设计详细演示数字全息成像的原理与过程.     

像面滤波技术在无透镜傅里叶变换数字全息中的应用

无透镜傅里叶变换数字全息波前重建主要采用全息图的一次快速傅里叶变换方法,重建图像不能充分占有重建平面.本文基于像平面滤波技术,提出对物体局部区域光波场进行放大重建并让重建图像布满重建平面的方法,给出具有精细结构物体的数字全息波前重建实例.此外,将数字全息光波场重建视为具有方形出射光瞳的光学系统的相干光成像过程,导出了物体放大图像的分辨率与光学系统相关参量的关系,并通过实验给予证明.     

像面滤波技术在无透镜傅里叶变换数字全息中的应用

无透镜傅里叶变换数字全息波前重建主要采用全息图的一次快速傅里叶变换方法,重建图像不能充分占有重建平面.本文基于像平面滤波技术,提出对物体局部区域光波场进行放大重建并让重建图像布满重建平面的方法,给出具有精细结构物体的数字全息波前重建实例.此外,将数字全息光波场重建视为具有方形出射光瞳的光学系统的相干光成像过程,导出了物体放大图像的分辨率与光学系统相关参量的关系,并通过实验给予证明.     

Holographic Three-Dimensional Display Using an Electron-Beam-Addressed Spatial Light Modulator

Three-dimensional (3-D) or holographic information extracted by two-dimensional active optical heterodyne scanning has been demonstrated recently. The technique is called optical scanning holography. To reconstruct the obtainable 3-D holographic information, digital techniques have been used and demonstrated. For real-time applications, we need to investigate spatial-light-modulator-based systems. In this paper, we first briefly review optical scanning holography, and then present experimental results of 3-D image reconstruction using an electron-beam-addressed spatial light modulator.     

Watermarking of three-dimensional objects by digital holography

We present an optical method for information watermarking of three-dimensional (3D) objects by digital holography. A hidden image is embedded by double phase encoding in a phase-shift digital hologram of the 3D object. We decode the watermarked hologram to reconstruct the hidden image and the 3D object. We use either the entire hologram or a part of it to decode the hidden image. Experiments are presented to illustrate the ability to recover both the 3D object and the decoded hidden image. Digital holograms of the 3D object are obtained by optical experiments. The watermarking process, 3D object reconstruction, and hidden image recovery are performed digitally. To the best of our knowledge, this is the first report of 3D object watermarking by use of a phase encoding technique and digital holography.     

基于空间光调制器的非相干数字全息单次曝光研究

菲涅耳非相干相关全息术(Fresnel incoherent correlation holography,FINCH)利用在空间光调制器(spatial light modulator,SLM)上加载双透镜模式对同一物点光分束自相干,并通过改变加载的相位因子得到不同的相移全息图.本系统利用SLM可分区编码调制特性,将FINCH成像中SLM上分三次加载的0°,120°,240°相位双透镜掩模各提取1/3组成一幅复合相移模式加载,并研究了三种相位分布方式对FINCH成像质量的影响.结果表明:三个相位在SLM上分布间隔越大,再现像越清晰.在此基础上,提出了一种新的掩模加载方式,在SLM加载透镜阵列,每一个相位因子对应一个双透镜,具有一个光轴.实验表明,通过这种加载方式,通过SLM后形成的三个相移图能够一次在电荷耦合器上记录,并且三个相移图不重叠,然后通过MATLAB编程计算将不同相移角度的全息图分别提取出来,通过三步相移计算合成一幅包含有物光波的复值全息图,最后通过数值再现算法重建待测样品.此系统可用于对光源相干性较低的实时成像系统,也为微小形变测量、动态物体的观测提供了新方法,为非相干数字全息术的发展提供了新思路.     

Phase-only stereoscopic hologram calculation based on Gerchberg–Saxton iterative algorithm

A phase-only computer-generated holography(CGH) calculation method for stereoscopic holography is proposed in this paper.The two-dimensional(2D) perspective projection views of the three-dimensional(3D) object are generated by the computer graphics rendering techniques.Based on these views,a phase-only hologram is calculated by using the Gerchberg–Saxton(GS) iterative algorithm.Comparing with the non-iterative algorithm in the conventional stereoscopic holography,the proposed method improves the holographic image quality,especially for the phase-only hologram encoded from the complex distribution.Both simulation and optical experiment results demonstrate that our proposed method can give higher quality reconstruction comparing with the traditional method.     

Study on the reduction of speckle noise in the reconstructed image of digital hologram

As one of the most important 3-D display technique, reduction of speckle noise in the reconstructed image of digital holography should be grounded on the digital hologram itself. Based on the whole process of the recording and reconstruction of digital holography, the optical distributions of recorded object and reconstructed image of digital holography have been studied. It has been proposed that the root formation cause of speckle noise in its reconstructed image is the speckle noise formed on the recorded object surface when illuminated by coherent light because of its optical roughness. A novel approach has been presented to reduce speckle noise in digital holography by changing the interference structure of hologram itself. First, by reducing the speckle noise in the reconstructed image, the distribution of ideal reconstruction light with reduced speckle noise is acquired. Then in turn, taking the ideal reconstruction light with reduced speckle noise as ideal object light, a new hologram can be rebuilt, which can reconstruct the ideal object light. The experimental results are given to confirm the proposed method. Therefore, it offers a brand-new thought and practical way to reduce the speckle noise in the reconstructed image of digital holography.     

基于位相变更的非相干数字全息自适应成像

菲涅耳非相干数字全息作为一种非扫描的三维成像技术具有其独特的优势,但其成像过程中会受到各种像差的影响,导致成像分辨率、再现像的质量降低.为了解决这一问题,可以结合适当的自适应光学技术对波前像差进行探测和校正.位相变更是一种基于两幅具有已知位相差的强度图像实现波前探测和像差校正的技术.本文发展了基于位相变更的非相干数字全息自适应成像技术,不需要引入引导星,利用全息记录过程中的两幅相移全息图,实现波前像差的探测.本文给出了所发展技术的数值仿真和实验结果,结合位相变更算法求解出系统像差的位相分布,将像差的共轭位相加载到光瞳面上,在全息图记录的同时校正像差,从而提高重建像的质量.     

Digital holography-assisted 3-D bright-field image reconstruction and refocusing

Optical Review - We propose an image reconstruction technique of a color 3-D object to perform image refocusing by combining information from bright-field image and digital holography. The key...     

Three-dimensional holographic fluorescence microscopy

Most commonly used methods for three-dimensional (3D) fluorescence microscopy make use of sectioning techniques that require that the object be physically scanned in a series of two-dimensional (2D) sections along the z axis. The main drawback in these approaches is the need for these sequential 2D scans. An alternative approach to fluorescence imaging in three dimensions has been developed that is based on optical scanning holography. This novel approach requires only a 2D scan to record 3D information. Holograms of 15-microm fluorescent latex beads with longitinal separation of ~2 mm have been recorded and reconstructed. To our knowledge, this is the first time holograms of fluorescent specimens have been recorded by an optical holographic technique.     

菲涅耳非相干数字全息大视场研究

菲涅尔非相干相关全息术(Fresnel incoherent correlation holography, FINCH)通过空间光调制器(spatial light modulator, SLM)将来自物点的光波分解为曲率半径不同的两束自相干光,干涉条纹由CCD记录.由于受限于SLM与CCD的像素数目及像素尺寸, FINCH技术与光学全息术相比记录视场要小得多.本文通过对FINCH系统的记录过程进行理论分析,给出了SLM所能记录的视场角,说明通过调控加载在SLM上的双透镜光轴中心,能够扩大SLM的有效直径从而将SLM的有效记录范围增大2.77倍,有效扩大了系统的记录视场.搭建了非相干光反射式数字全息记录系统并对理论分析进行了实验验证,结果表明:在SLM上依次加载不同光轴中心位置的双透镜掩模进行FINCH记录及再现,将得到的各子图像拼接融合可以得到高分辨率大视场图像,为菲涅尔非相干全息术在高分辨大视场显微成像的进一步应用提供了有力支撑.