Revealing the Unusual Rigid Boron Chain Substructure in Hard and Superconductive Tantalum Monoboride

Poor electrical conductivity severely limits the diverse applications of high hardness materials in situations where electrical conductivities are highly desired. A “covalent metal” TaB with metallic electrical conductivity and high hardness has been fabricated by a high pressure and high temperature method. The bulk modulus, 302.0(4.9) GPa, and Vickers hardness, 21.3 GPa, approaches and even exceeds that of traditional insulating hard materials. Meanwhile, temperature-dependent electrical resistivity measurements show that TaB possesses metallic conductivity that rivals some widely-used conductors, and it will transform into a superconductor at T_c=7.8 K. Contrary to common understanding, the hardness of TaB is higher than that of TaB₂, which indicates that low boron concentration borides could be mechanically better than the higher boron concentration counterparts. Compression behavior and first principles calculations denote that the high hardness is associated with the ultra-rigid covalent boron chain substructure. The hardness of TaB with different topologies of boron substructure shows that besides incorporating higher boron content, manipulating light element backbone configurations is also critical for higher hardness amongst transition metal borides with identical boron content.     

Thermoelectrical and optical properties of double wall carbon nanotubes:polyaniline containing boron n‐type organic semiconductors

The electrical conductivity, thermoelectrical, and optical properties of the polyaniline containing boron/double wall carbon nanotubes (CNTs) composites have been investigated. The electrical conductivities of the composites prepared with 1%, 5%, and 8% CNT concentrations at 300 K were found to be 5.31 × 10^?6, 2.72 × 10^?4, and 1.12 × 10^?3 (S/cm), respectively. The thermoelectrical results indicate that all the samples exhibit n‐type electrical conductivity. The optical band gaps of the samples were found to be 3.71 eV for 0% DWNT, 3.32 eV for 1% DWNT, 3.15 eV for 5% DWNT, and 3.12 eV for 8% DWNT. The obtained results suggest that the electrical conductivity of PANI‐B polymer is improved by DWNT doping. Copyright © 2008 John Wiley & Sons, Ltd.     

A New Class of Boron Nanotube

The configurations, stability and electronic structures of a new class of boron sheet and related boron nanotubes are predicted within the framework of density functional theory. This boron sheet is sparser than those of recent proposals. Our theoretic results show that the stable boron sheet remains flat and is metallic. There are bands similar to the π‐bands in graphite near the Fermi level. Stable nanotubes with various diameters and chiral vectors can be rolled from the sheet. Within our study, only the thin (8, 0) nanotube with a band gap of 0.44 eV is semiconducting, while all the other thicker boron nanotubes are metallic, independent of their chirality. It indicates the possibility, in the design of nanodevices, to control the electronic transport properties of the boron nanotube through the diameter.     

Ionic Dopant‐Encapsulating Single‐Walled Carbon Nanotube Films with Metal‐Like Electrical Conductivity

Heavy doping is inevitable for utilizing single‐walled carbon nanotubes for wiring. However, the electrical conductivity of their films is currently as low as one tenth of the films made from typical metal pastes. Herein we report on metal‐comparable electrical conductivity from single‐walled carbon nanotube network films. We use ionic liquids and crown ether complexes for p‐type and n‐type doping, respectively. The encapsulation of counterions into carbon nanotubes promotes the conductivities in the range of 7000 S cm^?1, approximately ten times larger than those of undoped films.     

Aspect ratio effects of multi‐walled carbon nanotubes on electrical,mechanical, and thermal properties of polycarbonate/MWCNT composites

Two multi‐walled carbon nanotubes (MWCNTs) having relatively high aspect ratios of 313 and 474 with approximately the same diameter were melt mixed with polycarbonate (PC) in a twin‐screw conical micro compounder. The effects of aspect ratio on the electrical, mechanical, and thermal properties of the PC/MWCNT composites were investigated. Electrical conductivities and storage moduli of the filled samples are found to be independent of the starting aspect ratio for these high aspect ratio tubes; although the conductivities and storage moduli are still significantly higher than values of composites made with nanotubes having more commercially common aspect ratios of ～100. Transmission electron microscopy results suggest that melt‐mixing reduces these longer nanotubes to the same length, but still approximately two times longer than the length of commercially common aspect ratio tubes after melt‐mixing. Molecular weight measurements show that during melt‐mixing the longer nanotubes significantly degrade the molecular weight of the polymer as compared to very similar nanotubes with aspect ratio ～100. Because of the molecular weight reduction glass transition temperatures predictably show a large decrease with increasing nanotube concentration. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 73–83     

Synthesis and characterization of monolithic carbon aerogel nanocomposites containing double-walled carbon nanotubes

We report the synthesis and characterization for the first examples of monolithic low-density carbon aerogel (CA) nanocomposites containing double-walled carbon nanotubes. The CA nancomposites were prepared by the sol-gel polymerization of resorcinol and formaldehyde in an aqueous surfactant-stabilized suspension of double-walled carbon nanotubes (DWNTs). The composite hydrogels were then dried with supercritical CO 2 and subsequently carbonized under an inert atmosphere to yield monolithic CA structures containing uniform dispersions of DWNTs. The microstructures and electrical conductivities of these CA nanocomposites were evaluated for different DWNT loadings. These materials exhibited high BET surface areas (>500 m (2)/g) and enhanced electrical conductivities relative to pristine CAs. The details of these results are discussed in comparison with theory and literature.     

水溶液体系中氧化石墨烯的γ射线辐射还原

石墨烯是一种碳原子以二维蜂窝状晶格结构构成的单片层材料,由于其具有优异的电传导性、力学性能和热传导性近年来受到广泛关注.本文采用γ射线辐射技术分别处理水溶液和对苯二胺(PPD)水溶液中的氧化石墨烯(GO),得到辐照还原氧化石墨烯(RGO)和胺基化修饰的还原氧化石墨烯(RGON).通过傅里叶变换红外(FTIR)光谱、X射线光电子能谱(XPS)、拉曼(Raman)光谱、X射线衍射(XRD)和热失重分析(TGA)等表征分析产物的化学结构和元素组成;通过四探针测试仪和接触角测量仪研究产物的导电性能和亲水性.实验结果表明,在水溶液及PPD水溶液中γ射线辐射均可高效还原GO,还原后得到的RGO和RGON电导率均显著增大.PPD的胺基在辐射还原过程中还可以修饰到石墨烯的表面,因此RGON的亲水性比RGO好,但胺基的存在会干扰石墨烯表面π电子的传导,导致其电导率下降.     

Linear augmented cylindrical wave Green’s function method for perfect nanotubes and nanotubes with regular and point impurities

Nanotubes are giant cage molecules looking like closed hollow cylindrical shells. This review deals with basic principles of the linear augmented cylindrical Green’s function method and its applications to calculation of the electronic structure of perfect nanotubes and those containing substitutional impurities. A major argument for using cylindrical waves to describe nanotubes is that such a choice of the basis set makes it possible to explicitly consider the actual cylindrical geometry of nanotubes, which, in particular, ensures rapid convergence of iterative procedures. A computation technique has been described and the results of calculations of the band structure and densities of states of carbon and boron nitride nanotubes have been reported. Special attention has been paid to the changes in the electronic properties of nanotubes induced by the substitution of nitrogen, boron, or oxygen for C atoms in the carbon nanotubes, as well as to the isoelectronic substitution of P, Sb, or As for the nitrogen and of Al, In, or Ga for the boron in boron nitride nanotubes.     

Studies on tetra-amine phthalocyanines

Metal(II) tetranitro phthalocyanines of cobalt, nickel and copper are synthesized in pure state by a novel modified method. The complexes are characterized using elemental, electronic and IR spectral studies. Pure metal(II) tetra-amino phthalocyanines of cobalt, nickel and copper are synthesized by reducing the nitro groups of the above complexes using sodium sulphide. These complexes are also characterized by elemental, electronic, IR spectral and magnetic susceptibility measurements. The nature of the electrical conductivities of the above three metal(II) tetra-amino phthalocyanine derivatives are studied in the temperature range 303-473 K and the data are presented. Among the effect of various substituent groups on the electrical conducting property of phthalocyanine, amine group substituent on the peripheral benzene ring of the phthalocyanine molecule has been found to increase electrical conductivity to a greatest extent. These complexes showed about 10⁵-10⁶ times higher electrical conductivities compared to their parent phthalocyanine compounds.     

NH3在硼纳米管表面吸附的密度泛函理论研究

利用密度泛函理论研究了NH₃在完整和含有缺陷的硼纳米管上的吸附行为以及相关电子性质. 计算结果表明, 对于α硼纳米管, 在不同的直径和手性条件下, NH₃均倾向于吸附在配位数为6的顶位上. 电子结构计算结果表明, NH₃能够吸附在纳米管表面主要是由于N和B原子产生了较强的相互作用. 表明硼纳米管是一种潜在的NH₃气气敏材料.     

Direct synthesis of B-C-N single-walled nanotubes by bias-assisted hot filament chemical vapor deposition

Direct synthesis of large-scale ternary boron carbonitride single-walled nanotubes (BCN-SWNTs) via a bias-assisted HFCVD process was presented. The BCN-SWNTs were grown over the powdery Fe-Mo/MgO catalyst by using CH4, B2H6, and ethylenediamine vapor as the reactant gases. As high as 16 atom % nitrogen can be incorporated within the nanotube shells, with the boron content in the range of 2-4 atom %. The ternary covalent bonding nature of the BCN-SWNTs was well characterized, and the B, C, and N elemental maps were clearly imaged by energy-filtered transmission electron microscopy.     

Thermal conductivity of carbon nanotube-polyamide-6,6 nanocomposites: reverse non-equilibrium molecular dynamics simulations

The thermal conductivity of composites of carbon nanotubes and polyamide-6,6 has been investigated using reverse non-equilibrium molecular dynamics simulations in a full atomistic resolution. It is found, in line with experiments, that the composites have thermal conductivities, which are only moderately larger than that of pure polyamide. The composite conductivities are orders of magnitude less than what would be expected from nai?ve additivity arguments. This means that the intrinsic thermal conductivities of isolated nanotubes, which exceed the best-conducting metals, cannot be harnessed for heat transport, when the nanotubes are embedded in a polymer matrix. The main reason is the high interfacial thermal resistance between the nanotubes and the polymer, which was calculated in addition to the total composite thermal conductivity as well as that of the subsystem. It hinders heat to be transferred from the slow-conducting polymer into the fast-conducting nanotubes and back into the polymer. This interpretation is in line with the majority of recent simulation works. An alternative explanation, namely, the damping of the long-wavelength phonons in nanotubes by the polymer matrix is not supported by the present calculations. These modes provide most of the polymers heat conduction. An additional minor effect is caused by the anisotropic structure of the polymer phase induced by the nearby nanotube surfaces. The thermal conductivity of the polymer matrix increases slightly in the direction parallel to the nanotubes, whereas it decreases perpendicular to it.     

Boron‐Double‐Ring Sheet,Fullerene, and Nanotubes: Potential Hydrogen Storage Materials

Similar to carbon‐based graphene, fullerenes and carbon nanotubes, boron atoms can form sheets, fullerenes, and nanotubes. Here we investigate several of these novel boron structures all based on the boron double ring within the framework of density functional theory. The boron sheet is found to be metallic and flat in its ground state. The spherical boron cage containing 180 atoms is also stable and has I symmetry. Stable nanotubes are obtained by rolling up the boron sheet, and all are metallic. The hydrogen storage capacity of boron nanostructures is also explored, and it is found that Li‐decorated boron sheets and nanotubes are potential candidates for hydrogen storage. For Li‐decorated boron sheets, each Li atom can adsorb a maximum of 4 H₂ molecules with g_d=7.892 wt %. The hydrogen gravimetric density increases to g_d=12.309 wt % for the Li‐decorated (0,6) boron nanotube.     

In situ polymerization of methyl methacrylate/multi-walled carbon nanotube composites using cationic stearyl methacrylate copolymers as dispersants

Novel water-soluble amphiphilic copolymers (poly[(stearyl methacrylate)-stat-([2-(methacryloyloxy)ethyl] trimethyl ammonium iodide)]) for dispersing multi-walled carbon nanotubes (MWCNTs) were used to carry out in situ methyl methacrylate (MMA) polymerization. The morphology of the poly(methyl methacrylate)/MWCNT composites and the dispersion of the MWCNTs were analyzed by transmission electron microscopy. The dispersion of multi-walled carbon nanotubes in the composites was excellent for cationic SMA (stearyl methacrylate) copolymers, even at high MWCNT loading (6.0 wt.%). The mechanical properties and electrical and thermal conductivities of the composites were also analyzed. Mechanical properties were improved by MWCNTs; the strain at break values remained stable up to 6.0 wt.% MWCNT loading. Both electrical and thermal conductivities were improved by the addition of MWCNTs.     

Coating of multiwalled carbon nanotubes with polymer nanospheres through microemulsion polymerization

We report a simple and noncovalent method for coating multiwalled carbon nanotubes (MWCNTs) with polyaniline (PANI) nanospheres using a microemulsion polymerization method. In this method, aniline polymerization is performed with MWCNTs in the presence of sodium dodecyl sulfate (SDS), which serves as both a surfactant and a dopant. Morphological, structural, thermal, and electrical properties of MWCNT–PANI nanocomposites were analyzed. The TEM results of the nanocomposites prepared with surfactant reveal that 30–50-nm-diameter PANI nanospheres were coated on the surface of the MWCNTs. Composites prepared without surfactant were found to be in core–sheath-type cable structures. The conductivities of the nanocomposites synthesized through microemulsion polymerization were found to be one order of magnitude higher than both the conductivities of pure PANI and the composites prepared via in situ chemical polymerization without an assisting SDS surfactant. The mechanism for the formation of nanostructured composites is presented.     

Bulk electrical properties of single-walled carbon nanotubes immobilized by dielectrophoresis: evidence of metallic or semiconductor behavior

We report the electrical characterization of single-walled carbon nanotubes (SWCNTs) trapped between two electrodes by dielectrophoresis (DEP). At high frequency, SWCNTs collected by DEP are expected to be of metallic type. Indeed current-voltage (I-V) measurements for devices made at 10 MHz show high values of conductivity and exhibit metallic behavior with linear and symmetric electrical features attributed to ohmic conduction. At low frequency, SWCNTs attracted by DEP are expected to be of semiconducting nature. Devices made at 10 kHz behave as semiconductors and demonstrate nonlinear and rectifying electrical characteristics with conductivities many orders of magnitude below the sample resulting from high-frequency immobilization of SWCNTs. Conducting atomic force microscopy (C-AFM) and current density calculation results are presented to reinforce results obtained by I-V measurements which clearly show type separation of SWCNTs after DEP experiments.     

New family of aminophenalenyl-based neutral radical molecular conductors: synthesis, structure, and solid state properties

We report the preparation, crystallization, and solid-state characterization of the first members of a new family of spiro-bis-(1,9-diamino-substituted-phenalenyl)boron neutral radicals. The crystal structures show that the three radicals are monomeric and without close contacts in the crystal lattice. In all cases magnetic susceptibility measurements confirm the presence of free radicals with one unpaired spin per molecule. Two of the new radical compounds are among the most highly conducting neutral organic solids, with room-temperature conductivities reaching sigma(RT) = 4 x 10(-2) S/cm. The measured conductivities correlate with the closest intermolecular contacts in the solid state and with the calculated band dispersions, even though the bandwidths are much smaller than those found in other organic conductors.     

Moisture–absorption,dielectric relaxation,and thermal conductivity studies of polymer composites

In the search for new packaging materials for the electrical/electronics industry, three types of polymer composites have been studied. Silicone/boron nitride powders, polyurethane/alumina powders, and polyurethane/carbon fibers have all been synthesized to study the moisture–absorption kinetics, thermal conductivities, and the dielectric loss spectra under various levels of humidity. The water uptake data indicate that water molecules are absorbed not only by the polymer matrix, but also by the interfaces introduced by the fillers. For all materials, the dielectric relaxation spectroscopy shows the presence of a peak in the 175–200 K range, which is largely due to absorbed water. The silicone/boron nitride samples absorbed the least amount of moisture. Incorporating this result with the thermal conductivity data of the three types of polymer composites, it is concluded that silicone polymers embedded with boron nitride can best serve as the coating for the electronic devices that require heat dissipation and moisture resistance, in addition to electrical insulation. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 2259–2265, 1998     

Epoxy Nanocomposites

The formation and physical properties of epoxy nanocomposites with carbon (nanotubes, graphene, and graphite), metal-containing, and aluminosilicate (montmorillonite and halloysite) fillers are considered. The mutual effect of both a matrix and nanoparticles on the composite structure is discussed. The role of the interfacial layer in the mechanical properties of nanocomposites is revealed. It is found that the concentration dependence of electrical and thermal conductivities of the composites is related to the percolation phenomenon.     

Heat transfer and rheological properties of transformer oil-oxidized MWCNT nanofluid

Power transformers play a key role in power and electrical industries and thus boosting their efficiency is necessary. In this study, the effect of oxidized multi-walled carbon nanotubes on transformer oil thermophysical properties was experimentally investigated. The maximum amount of carbon nanotubes was chosen up to 0.01 mass% to assure the maximum purity of transformer oil. Heat transfer characteristics of transformer oil and nanofluids in two cases of free and forced convection were studied. Breakdown voltage, flash point, pour point, density, electrical and thermal conductivities, viscosity and shear stress, as eight important quality parameters, were determined. According to the experimental results, the Breakdown voltage decreased through concentration increasing. Electrical conductivity is not changed considerable with increasing concentration and temperature. Thermal conductivity of nanofluids and transformer oil changed with increasing temperature and concentration. Furthermore, at all concentrations and temperatures, the viscosity of the nanofluids was lower than that of transformer oil.