Trifluoroacetylacetonate rhodium(III) methyl complexes, cis-[Rh(TFA)(PPh3)2(CH3)(L)][BPh4] and cis-[Rh(TFA)(PPh3)2(CH3)(I)] (L = CH3CN, NH3, pyridine), in comparison with their acetylacetonate analogs

The oxidative addition of CH₃I to planar rhodium(I) complex [Rh(TFA)(PPh₃)₂] in acetonitrile (TFA is trifluoroacetylacetonate) leads to the formation of cationic, cis-[Rh(TFA)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] (1), or neutral, cis-[Rh(TFA)(PPh₃)₂(CH₃)(I)] (4), rhodium(III) methyl complexes depending on the reaction conditions. 1 reacts readily with NH₃ and pyridine to form cationic complexes, cis-[Rh(TFA)(PPh₃)₂(CH₃)(NH₃)][BPh₄] (2) and cis-[Rh(TFA)(PPh₃)₂(CH₃)(Py)][BPh₄] (3), respectively. Acetylacetonate methyl complex of rhodium(III), cis-[Rh(Acac)(PPh₃)₂(CH₃)(I)] (5), was obtained by the action of NaI on cis-[Rh(Acac)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] in acetone at −15 °C. Complexes 1-5 were characterized by elemental analysis, ³¹P{¹H}, ¹H and ¹⁹F NMR. For complexes 2, 3, 4 conductivity data in acetone solutions are reported. The crystal structures of 2 and 3 were determined. NMR parameters of 1-5 and related complexes are discussed from the viewpoint of their isomerism.     

Synthesis and characterisation of six Fe(II or III), Co(II) or Zr(IV) complexes containing the ligand [CH(SiMe2R)P(Ph)2NSiMe3] (R = Me, NEt2) and of [Co{N(SiMe3)C(Ph)C(H)P(Ph)2NSiMe3}2]

The C,N-(trimethylsilyliminodiphenylphosphoranyl)silylmethylmetal complexes [Fe(L)₂] (3), [Co(L)₂] (4), [ZrCl₃(L)]·0.83CH₂Cl₂ (5), [Fe(L)₃] (6), [Fe(L′)₂] (7) and [Co(L′)₂] (8) have been prepared from the lithium compound Li[CH(SiMe₂R)P(Ph)₂NSiMe₃] [1a, (R = Me) {≡ Li(L)}; 1b, (R = NEt₂) {≡ Li(L′)}] and the appropriate metal chloride (or for 7, FeCl₃). From Li[N(SiMe₃)C(Ph)C(H)P(Ph)₂NSiMe₃] [≡ Li(L″)] (2), prepared in situ from Li(L) (1a) and PhCN, and CoCl₂ there was obtained bis(3-trimethylsilylimino- diphenylphosphoranyl-2-phenyl-N-trimethylsilyl-1-azaallyl-N,N′)cobalt(II) (9). These crystalline complexes 3-9 were characterised by their mass spectra, microanalyses, high spin magnetic moments (not 5) and for 5 multinuclear NMR solution spectra. The X-ray structure of 3 showed it to be a pseudotetrahedral bis(chelate), the iron atom at the spiro junction.     

Cyclopentadienyl tungsten complexes with thiocarboxylate and thiosulfonate ligands: Structures of CpW(CO)3SCOPh and CpW(CO)3SSO2-4-C6H4Cl

Treatment of the hydrosulfido tungsten complex CpW(CO)₃SH with acid chlorides (RCOCl) or sulfonyl chlorides (RSO₂Cl) affords CpW(CO)₃SCOR (1) [R = Me (a), CH₂Cl (b), Ph (c), 4-C₆H₄NO₂ (d)] and CpW(CO)₃SSO₂R (2) [R = Me (a), Ph (b), 4-C₆H₄Cl (c), 4-C₆H₄NO₂ (d)], respectively. The novel complexes, 1 and 2, were fully characterized by elemental analyses, IR and ¹H NMR spectroscopy. The solid state structures of CpW(CO)₃SCOPh (1c) and CpW(CO)₃SSO₂-4-C₆H₄Cl (2c) were determined by an X-ray crystal structure analysis.     

Formation and structural characterization of mercury complexes from Te(R)CH2SiMe3 (R = Ph, CH2SiMe3) and HgCl2

The reaction of HgCl₂ and Te(R)CH₂SiMe₃ [R = CH₂SiMe₃ (1), Ph (2)] in ethanol yielded a mononuclear complex [HgCl₂{Te(R)CH₂SiMe₃}₂] (R = Ph, 3a; R = CH₂SiMe₃, 3b). The recrystallization of 3a or 3b from CH₂Cl₂ produced a dinuclear complex [Hg₂Cl₂(μ-Cl)₂{Te(R)CH₂SiMe₃}₂] (R = Ph, 4a; R = CH₂SiMe₃, 4b). When 3a was dissolved in CH₂Cl₂, the solvent quickly removed, and the solid recrystallized from EtOH, a stable ionic [HgCl{Te(Ph)CH₂SiMe₃}₃]Cl·2EtOH (5a·2EtOH) was obtained. Crystals of [HgCl₂{Te(CH₂SiMe)₂}]·2HgCl₂·CH₂Cl₂ (6b·2HgCl₂·CH₂Cl₂) were obtained from the CH₂Cl₂ solution of 3b upon prolonged standing. The complex formation was monitored by ¹²⁵Te-, and ¹⁹⁹Hg NMR spectroscopy, and the crystal structures of the complexes were determined by single crystal X-ray crystallography.     

Novel octahedral nickel(II) dithiocarbamates with bi- or tetradentate N-donor ligands: X-ray structures of [Ni(Bzppzdtc)(phen)2]ClO4 · CHCl3 and [Ni(Bz2dtc)2(cyclam)]

A series of novel octahedral nickel(II) dithiocarbamate complexes involving bidentate nitrogen-donor ligands (phen = 1,10-phenanthroline, bpy = 2,2′-bipyridine) or a tetradentate ligand (cyclam = 1,4,8,11-tetraazacycloteradecane) of the composition [Ni(BzMetdtc)(phen)₂]ClO₄ (1), [Ni(Pe₂dtc)(phen)₂]ClO₄ (2), [Ni(Bzppzdtc)(phen)₂]ClO₄ · CHCl₃ (3), [Ni(Bzppzdtc)(phen)₂](SCN) (4), [Ni(BzMetdtc)(bpy)₂]ClO₄ · 2H₂O (5), [Ni(Pe₂dtc)(cyclam)]ClO₄ (6), [Ni(BzMetdtc)₂(cyclam)] (7), [Ni(Bz₂dtc)₂(cyclam)] (8) and [Ni(Bz₂dtc)₂(phen)] (9) (BzMetdtc = N,N-benzyl-methyldithiocarbamate(1-) anion, Pe₂dtc = N,N-dipentyldithiocarbamate(1-) anion, Bz₂dtc = N,N-dibenzyldithiocarbamate(1-) anion, Bzppzdtc = 4-benzylpiperazinedithiocarbamate(1-) anion), have been synthesized. Spectroscopic (electronic and infrared), magnetic moment and molar conductivity data, and thermal behaviour of the complexes are discussed. Single crystal X-ray analysis of 3 and 8 confirmed a distorted octahedral arrangement in the vicinity of the nickel atom with a N₄S₂ donor set. They represent the first X-ray structures of such type complexes. The catalytic influence of complexes 2, 3, 6, and 7 on graphite oxidation was studied and discussed.     

Synthesis of new substituted cyclopentadienyl titanium monomethoxydifluorides with BF3 · OEt2 as fluorinating reagent and their use in syndiotactic polymerization of styrene

Five substituted cyclopentadienyl titanium trimethoxide complexes, RCpTi(OMe)₃ (R=Me (2b), ⁱPr (2c), Me₃Si (2d), allyl (2e), PhCH₂ (2f)), were prepared. By reacting RCpTi(OMe)₃ with BF₃OMe₂, six RCpTiF₂(OMe) (R=H (3a), Me (3b), ⁱPr (3c), Me₃Si (3d), allyl (3e), PhCH₂ (3f)) were obtained. When activated with methylaluminoxane (MAO), the activities of RCpTiF₂(OMe) system were less than those of RCpTi(OMe)₃ system in solution polymerization of styrene, but the polymers made by RCpTiF₂(OMe) exhibited higher Mw and melting point than those by RCpTi(OMe)₃. Both systems produced polymers with similar syndiotacticities in the range 92.4-97.6%. Introduction of a substituent group into the Cp-ligand enhanced the melting points of the polymers, and meanwhile decreased the catalytic activities of RCpTi(OMe)₃/MAO and RCpTiF₂(OMe)/MAO systems, where the order of activity was RCp=Cp > MeCp > ⁱPrCp > Me₃SiCp > CH₂CHCH₂Cp > PhCH₂Cp. Complexes 2a (CpTi(OMe)₃) and 3a showed the highest activities respectively for both systems, and are three to four times more active than CpTiCl₃. In bulk polymerization, the difference of activities between RCpTi(OMe)₃/MAO and RCpTiF₂(OMe)/MAO systems became small, where complexes 2e and 3e exhibited remarkably higher activities compared with their solution polymerization activities. The maximum polymerization activities were found at the polymerization temperature of 50 °C for most of the complexes. The influence of the polymerization time (t_P), polymerization temperature (T_P) and Al/Ti ratio on the activities of complexes 2b and 3b were investigated. It was observed that the initial rate of propagation of complex 2b was higher than that of complex 3b and the highest activities of both catalysts were reached at the relatively low Al/Ti ratio of 150 and decrease for larger ratios.     

Crystal structure and spectral characterization of hexanuclear oxo titanium(IV) clusters: [Ti6O6(OSi(CH3)3)6(OOCR)6] (R = Bu,CH2Bu,C(CH3)2Et)

Hexanuclear oxo titanium(IV) siloxo carboxylate complexes with the general formula [Ti₆O₆(OSi(CH₃)₃)₆(OOCR)₆] (R = Bu^t (1), CH₂Bu^t (2), C(CH₃)₂Et (3)) were synthesized in quantitative yield, by the reaction of Ti(OSiMe₃)₄ with the appropriate organic acid. Crystal structure determination revealed that molecules of 1–3 are composed of [Ti₆-(μ₃-O)₆] cores stabilized by six syn–syn carboxylato bridges and six terminal siloxide ligands. Each metal atom is surrounded by six oxo atoms, capping the triangular faces of the distorted octahedron. Spectral characterization (IR, NMR) of 1–3 revealed a significant non-equivalence of the carboxylate group interactions, resulting from the asymmetry of the Ti-μ-OOC bonds of the syn–syn bridges. The thermal stability of the studied compounds was determined from TGA/DTA analysis.     

Pentabenzylcyclopentadienyl molybdenum and tungsten hydrides: Syntheses, structures and electrochemistry of [MHCp(CO)2(L)] (L = CO, PMe3, PPh3)

Complexes [MHCp^Bz(CO)₂(PR₃)] (R = CH₃, M = Mo (1); M = W (2); R = Ph, M = Mo (3); Cp^Bz = C₅(CH₂Ph)₅) were prepared by thermal decarbonylation of the corresponding [MHCp^Bz(CO)₃] in the presence of trimethyl- or triphenyl-phosphine. In solution the NMR spectra of all compounds show the presence of cis and trans isomers that interconvert at room temperature. In the solid state the molecular structures obtained for compounds 1 and 2 correspond to the trans isomers, while for 3 the cis isomer is present.The electrochemistry of [MoHCp^Bz(CO)₂(PMe₃)] (1), [MoHCp^Bz(CO)₃] (5), [WHCp^Bz(CO)₃] (6), [WCp^Bz(CO)₃]₂ (7), and [MCp^Bz(CO)₃(CH₃CN)]BF₄ (8), is described. The cleavage of M-H bonds takes place upon oxidation or reduction. Cations [MCp^Bz(CO)₂L(CH₃CN)]⁺ form in solvent-assisted M-H bond breaking upon oxidation of [MHCp^Bz(CO)₂L] (L = PMe₃, CO). Reduction of [MHCp^Bz(CO)₃] gives [MCp^Bz(CO)₃]⁻ and H₂. The presence of one PMe₃ ligand lowers the reduction potential and precludes the observation of reduction waves.     

The reaction of the group-13 alkyls ER3 (E = Al, Ga, In; R = CH2t-Bu, CH2 SiMe3) with the platinum-complex [(dcpe)Pt(H)(CH2t-Bu)]

The reactions of the sterically demanding group-13 alkyls ER₃ (E = Al, Ga, In; R = CH₂t-Bu, CH₂SiMe₃) with the platinum-complex [(dcpe)Pt(H)(CH₂t-Bu)] were re-investigated. The bimetallic compounds [(dcpe)Pt(ER₂)(R)] (3: E = Ga, R = CH₂SiMe₃; 5: E = In, R = CH₂t-Bu; dcpe = bis(dicyclohexylphosphino)ethane) with direct σ(Pt-E) bonds were obtained by oxidative addition of an E-C bond to the coordinatively unsaturated fragment [(dcpe)Pt] produced in situ by thermolysis of the starting complex [(dcpe)Pt(CH₂t-Bu)(H)]. The single crystal structure determination reveals a Pt-Ga bond length of 2.376(2) Å and a Pt-In bond length of 2.608(1) Å. All new compounds were characterised by elemental analysis, ³¹P and ¹⁹⁵Pt NMR spectroscopy. Interestingly, the Pt-Ga compound 3 slowly transforms into the platinum alkyl/hydride isomer {(dcpe)Pt(μ₂-H)[CH₂Si(CH₃)₂ CH₂Ga(CH₂SiMe₃)₂]} (4) during crystallization from solution at room temperature. The X-ray single crystal structure analysis revealed both complexes 3 and 4 coexisting in the unit cell in a 1:1 relation. The inaccessibility of analytically pure samples of the Pt-Al complex {(dcpe)Pt[Al(CH₂t-Bu)₂](CH₂t-Bu)} (6), postulated as intermediate of the reaction of [(dcpe)Pt(H)(CH₂t-Bu)] with Al(CH₂t-Bu) on the basis of ³¹P and ¹⁹⁵Pt NMR data, is attributed to an enhanced tendency to isomerisation into the alkyl/hydride Pt/Al congener of 4. A brief DFT analysis of the bonding situation of the model complex [(dhpe)Pt(GaMe₂)(Me)] (1M) revealed, that the contribution of π(Pt-Ga) back-bonding is negligible.     

Chemically modified oximato complexes of titanium(IV) isopropoxide as new precursors for the sol-gel preparation of nano-sized titania: Crystal and molecular structure of [Ti{ONC10H16}4·2CH2Cl2]

Reactions of [Ti(OPrⁱ)₄] with various oximes, in anhydrous refluxing benzene yielded complexes of the type [Ti{OPrⁱ}_4−n{L}_n], where, n = 1-4 and LH = (CH₃)₂CNOH (1-4), C₉H₁₆CNOH (5-8) and C₉H₁₈CNOH (9-12). The compounds were characterized by elemental analyses, molecular weight measurements, FAB-mass, FT-IR and NMR (¹H, ¹³C{¹H}) spectral studies. The FAB-mass spectra of mono- (1), and di- (2), (6), (10) substituted products indicate their dimeric nature and that of tri- (3) and tetra- (4), (8) substituted derivatives suggest their monomeric nature. Crystal and molecular structure of [Ti{ONC₁₀H₁₆}₄·2CH₂Cl₂] (8A) suggests that the oximato ligands bind the metal in a dihapto η²-(N, O) manner, leading to the formation of an eight coordinated species. Thermogravimetric curves of (3), (6) and (10) exhibit multi-step decomposition with the formation of TiO₂ as the final product in each case, at 900 °C. Low temperature (∼600 °C) sol-gel transformations of (2), (3), (4), (6), (7) and (8) yielded nano-sized titania (a), (b), (c), (d), (e) and (f), respectively. Formation of anatase phase in all the titania samples was confirmed by powder XRD patterns, FT-IR and Raman spectroscopy. SEM images of (a), (b), (c), (d), (e) and (f) exhibit formation of nano-grains with agglomer like surface morphologies. Compositions of all the titania samples were investigated by EDX analyses. The absorption spectra of the two representative samples, (a) and (f) indicate an energy band gap of 3.17 eV and 3.75 eV, respectively.     

Quantum chemical study of ethylene addition to group-7 oxo complexes MO2(CH3)(CH2) (M = Mn, Tc, Re)

Quantum chemical calculations using DFT at the B3LYP level have been carried out for the reaction of ethylene with the group-7 compounds ReO₂(CH₃)(CH₂) (Re1), TcO₂(CH₃)(CH₂) (Tc1) and MnO₂(CH₃)(CH₂) (Mn1). The calculations suggest rather complex scenarios with numerous pathways, where the initial compounds Re1-Mn1 may either engage in cycloaddition reactions or numerous addition reactions with concomitant hydrogen migration. There are also energetically low-lying rearrangements of the starting compounds to isomers which may react with ethylene yielding further products. The [2 + 2]_Re,C cycloaddition reaction of the starting molecule Re1 is kinetically and thermodynamically favored over the [3 + 2]_C,O and [3 + 2]_O,O cycloadditions. However, the reaction which leads to the most stable product takes place with initial rearrangement to the dioxohydridometallacyclopropane isomer Re1a that adds ethylene with concomitant hydrogen migration yielding Re1a-1. The latter reaction has a slightly higher barrier than the [2 + 2]_Re,C cycloaddition reaction. The direct [3 + 2]_C,O cycloaddition becomes more favorable than the [2 + 2]_M,C reaction for the starting compounds Tc1 and Mn1 of the lighter metals technetium and manganese but the calculations predict that other reactions are kinetically and thermodynamically more favorable than the cycloadditions. The reactions with the lowest activation barriers lead after rearrangement to the ethyl substituted dioxometallacyclopropanes Tc1a-1 and Mn1a-1. The manganese compound exhibits an even more complex reaction scenario than the technetium compounds. The thermodynamically most stable final product of ethylene addition to Mn1 is the ethoxy substituted metallacyclopropane Mn1a-2 which has, however, a high activation barrier.     

New versatile organyltellurium(IV) halides: Synthesis and X-ray structural features of the telluronium tellurolate salts [PhTe(CH3)2]2[TeX6] (X = Cl, Br) and [Ph3Te][PhTeX4] (X = Cl, Br, I)

TeX₄ (X = Cl, Br) react in HCl/HBr with [Ph(CH₃)₂Te]X (X = Cl, Br) to give [PhTe(CH₃)₂]₂[TeCl₆] (1) and [PhTe(CH₃)₂]₂[TeBr₆] (2). The reaction of PhTeX₃ (X = Cl, Br, I) in cooled methanol with [(Ph)₃Te]X (X = Cl, Br, I) leads to [Ph₃Te][PhTeCl₄] (3), [Ph₃Te][PhTeBr₄] (4) and [Ph₃Te][PhTeI₄] (5). In the lattices of the telluronium tellurolate salts 1 and 2, octahedral TeCl₆ and TeBr₆ dianions are linked by telluronium cations through Te?Cl and Te?Br secondary bonds, attaining bidimensional (1) and three-dimensional (2) assemblies. The complexes 3, 4 and 5 show two kinds of Te?halogen secondary interactions: the anion-anion interactions, which form centrosymmetric dimers, and two identical sets of three telluronium-tellurolate interactions, which accomplish the centrosymmetric fundamental moiety of the supramolecular arrays of the three compounds, with the tellurium atoms attaining distorted octahedral geometries. Also phenyl C-H?halogen secondary interactions are structure forming forces in the crystalline structures of compounds 3, 4 and 5.     

Supramolecular chemistry of half-sandwich organometallic building blocks based on RuCl2(p-cymene)Ph2PCH2Y

A new series of neutral organometallic building blocks based on piano-stool ruthenium(II) complexes, RuCl₂(p-cymene)Ph₂PCH₂Y [Y = -NHC₆H₄(2-CO₂H) (2a), -NHC₆H₄(3-CO₂H) (2b), -NHC₆H₃(3-CO₂H)(6-OCH₃) (2c), -NHC₆H₄(4-CO₂H) (2d), -NHC₆H₃(2-CO₂H)(4-OH) (2e), -NHC₆H₃(3-OH)(4-CO₂H) (2f), -NHC₆H₃(2-CO₂H)(5-CO₂H) (2g) and -OH (2h)], were synthesised in high yields (>88%) from {RuCl₂(p-cymene)}₂ and the appropriate phosphines 1a-1h. The new tertiary phosphine 1b was prepared by Mannich condensation of NH₂C₆H₄(3-CO₂H) with Ph₂PCH₂OH in MeOH. Solution NMR (³¹P{¹H}, ¹H), FT-IR and microanalytical data are in full agreement with the proposed structures. Single crystal X-ray studies confirm that, in each case, compounds 2a, 2b and 2d-2h have piano-stool arrangements with typical Ru-P, Ru-Cl and Ru-C_centroid bond lengths. From our crystallographic studies, factors that influence the supramolecular assemblies of these ruthenium(II) complexes include: (i) the type of functional group present, (ii) the geometric disposition of the -N(H)CH₂PPh₂, -CO₂H and -OH groups around the central benzene scaffold, and (iii) the solvents used in the recrystallisations. Hence in isomers 2a and 2b, molecules are associated into head-to-tail dimer pairs through classical intermolecular O-H?O hydrogen bonding. This feature is also observed in isomer 2d but dimer pairs are further associated to give a 1-D chain through assisted intermolecular N-H?Cl hydrogen bonding. The additional 4-hydroxo group in 2e promotes a ladder arrangement via intermolecular O-H?O and O-H?Cl hydrogen bonding. In contrast the isomeric compound 2f does not show head-to-tail O-H?O hydrogen bonding but instead O-H?Cl and N-H?O intermolecular hydrogen bonding is observed. Depending on the choice of solvent (MeOH or DMSO), 2g forms extended networks based on chains (2g · DMSO · 1.5MeOH) or tapes (2g · 3MeOH). In 2h, a single intramolecular O-H?Cl hydrogen bond is observed for each independent molecule. The X-ray structure of one representative tertiary phosphine, 1f, has also been determined.     

Branched and dendritic metallo-carbosiloxanes with OCH2PPh2MLn end-grafted units

A straightforward method for the preparation of metallo carbosiloxanes of type Si(OCH₂CH₂CH₂SiMe₂[OCH₂PPh₂M(CO)_n])₄ (n = 3, M = Ni, 7a; n = 4, M = Fe, 7b; n = 5: M = Mo, 7c; M = W, 7d), Si(OCH₂CH₂CH₂SiMe[OCH₂PPh₂Ni(CO)₃]₂)₄ (8) and Me₂Si(OCH₂CH₂CH₂SiMe[OCH₂PPh₂Ni(CO)₃]₂)₂ (11) is described. The reaction of Si(OCH₂CH₂CH₂SiMeXCl)₄ (1: X = Me, 2: X = Cl) or Me₂Si(OCH₂CH₂CH₂SiMeCl₂)₂ (9) with HOCH₂PPh₂ (3) produces Si(OCH₂CH₂CH₂SiMe₂(OCH₂PPh₂))₄ (4), Si(OCH₂CH₂CH₂SiMe(OCH₂PPh₂)₂)₄ (5) or Me₂Si(OCH₂CH₂CH₂SiMe(OCH₂PPh₂)₂)₂ (10) in presence of DABCO. Treatment of the latter molecules with Ni(CO)₄ (6a), Fe₂(CO)₉ (6b), M(CO)₅(Thf) (6c: M = Mo; 6d: M = W), respectively, gives the title compounds 7a-7d, 8 and 11 in which the PPh₂ groups are datively bound to a 16-valence-electron metal carbonyl fragment.The formation of analytical pure and uniform branched and dendritic metallo carbosiloxanes is based on elemental analysis, and IR, ¹H, ¹³C{¹H}, ²⁹Si{¹H} and ³¹P{¹H} NMR spectroscopic studies. In addition, ESI-TOF mass spectrometric studies were carried out.     

Assembly molecular architectures based on structural variation of metalloligand [Cu(PySal)2] (PySal = 3-pyridylmethylsalicylideneimino)

A versatile neutral metalloligand [Cu(PySal)₂] (1) (PySal = 3-pyridylmethylsalicylidene-imino) was exploited as a building unit to construct five complexes {Cu[Cu(PySal)₂]₂}(ClO₄)₂ (2), {Cd[Cu(PySal)₂]₂(H₂O)₂]} (NO₃)₂ · 2H₂O · 4CH₃OH (3), {Zn[μ₂-Cu(PySal)₂]Cl₂}_n · nCH₃OH (4), {Hg[μ₂-Cu(PySal)₂]I₂}_n (5) and {Cd[μ₂-Cu(PySal)₂]Cl₂}_n · nCH₂Cl₂ (6). [Cu(PySal)₂] acts as a chelating ligand in discrete complexes 2 and 3 with unbound anions, but as a bis-monodentate bridging ligand in polymers 4, 5 and 6 when halogen anions coordinated cooperatively to metal cations. The coordination geometry of Cu²⁺ is well-defined square planar in bridging [Cu(PySal)₂], analogous to that in free metalloligand (1), but it is distorted square planar in chelating [Cu(PySal)₂].     

Reverse Kocheshkov reaction - Redistribution reactions between RSn(OCH2CH2NMe2)2Cl (R = Alk, Ar) and PhSnCl3: Experimental and DFT study

A series of organotin compounds bearing two intramolecular N → Sn coordination bonds RSn(OCH₂CH₂NMe₂)₂Cl (R = Me (4), n-Bu (5), Mes (6)) were synthesized in good yields. These compounds as well as 2 (R = Ph) react with PhSnCl₃ to give redistribution products RPhSnCl₂ and (Me₂NCH₂CH₂O)₂SnCl₂ (3). The direction of redistribution reactions is reverse to Kocheshkov reaction. DFT calculations have shown that the driving force of the reactions is formation of intramolecular N → Sn coordination bonds in (RO)₂SnCl₂ (3), the Lewis acid stronger than RSn(OR)₂Cl (2, 4-6). The mechanism of the redistribution reaction between 2 and PhSnCl₃ consists of two steps: (1) initial exchange of OCH₂CH₂NMe₂ and Cl to give PhSn(OCH₂CH₂NMe₂)Cl₂ (7) followed by (2). Ph and OCH₂CH₂NMe₂ exchange.     

Synthesis, structures and preliminary biological screening of bis(diphenyl)chlorotin complexes and adducts: Ph2ClSn-CH2-R-CH2-SnClPh2, R = p-C6H4, CH2CH2

The reaction between ClCH₂-R-CH₂Cl, R = p-C₆H₄, and [Ph₃Sn]⁻Li⁺ yields Ph₃Sn-CH₂-R-CH₂-SnPh₃ (1) in high yield. The related known compound R = CH₂CH₂ (1a) is synthesized by the reaction of the di-Grignard reagent BrMg(CH₂)₄MgBr with two equivalents of Ph₃SnCl. Cleavage of a single Sn-Ph group at each tin centre of both compounds using HCl/Et₂O yields the corresponding bis-chlorostannanes Ph₂ClSn-CH₂-R-CH₂-SnClPh₂, R = (CH₂)₄ (2) and R = C₆H₄ (3), respectively. Compounds 1, 2 and 3 are crystalline solid materials and their single crystal X-ray structures are reported. In the solid state both 2 and 3 form self-assembled ladder structures involving alternating intermolecular Cl-Sn?Cl and Cl?Sn-Cl bonded chains at both ends of the distannanes with 5-coordinate tin atoms. Recrystallization of 3 from CH₂Cl₂ in the presence of DMF yields the bis-DMF adduct (4) in which no self-assembled structures were noted. Evaluation of the chlorostannanes 2 and 3 against a suite of bacteria, Staphylococcus aureus, Escherichia coli and Photobacterium phosphoreum is reported and compared to the related mono-chlorostannanes Ph₂(CH₃)SnCl and Ph₂(PhCH₂)SnCl.     

Convenient syntheses of fluorous phenols of the formula HOC6H5−n((CH2)3(CF2)7CF3)n (n=1, 2) and the corresponding triarylphosphites

The aldehydic benzyl ethers PhCH₂OC₆H₄CHO (2; a/b = para/meta series) are readily available from the corresponding phenols and react with Wittig reagents derived from [Ph₃PCH₂CH₂R_f8]⁺I⁻ (R_f8=(CF₂)₇CF₃) to give PhCH₂OC₆H₄CHCHCH₂R_f8 (86-93%, Z major). Reactions with H₂ over Pd/C give the fluorous phenols HOC₆H₄(CH₂)₃R_f8(4a,b; 87-91%). Condensations with PCl₃ and NEt₃ (3.0:1.0:3.3 mol ratio) give the fluorous phosphites P[OC₆H₄(CH₂)₃R_f8]₃(5a,b; 92-94%), but traces of 4a,b are difficult to remove. The phthalate-based benzyl ethers PhCH₂OC₆H₃(COOR)₂ (7; ,5/3,4 OC₆H₃-3,n-(R)₂ series) are easily accessed and reduced with LiAlH₄ to the diols PhCH₂OC₆H₃(CH₂OH)₂(8c,d; 89-90%). Diol 8c and the Dess-Martin periodinane react to give the dialdehyde PhCH₂OC₆H₃(CHO)₂ (9c; 95%). This is elaborated by a sequence analogous to 2→4→5 to the fluorous phenol HOC₆H₃((CH₂)₃R_f8)₂ (11c; 97%/96%, two steps) and phosphite P[OC₆H₃((CH₂)₃R_f8)₂]₃ (12c, 92%), from which traces of 11c are difficult to remove. Diol 8d can be similarly elaborated to 11d, but the dialdehyde 9d is labile and the combined yield of the Dess-Martin/Wittig steps is 32%. The CF₃C₆F₁₁/toluene partition coefficients of 11c,d, and 12c (two pony tails; 70:30, 72:28, 92:8) are much higher than those of 4a and b (one pony tail; 12:88, 14:86).     

Synthesis, characterization, and ethylene polymerization behavior of [(RR′-admpzp)2Ti(OPr)2] complexes (RR′-admpzp = 1-dialkylamino-3-(3,5-dimethyl-pyrazol-1-yl)-propan-2-olate)

[(RR′-admpzp)₂Ti(OPrⁱ)₂] complexes (2a-c), synthesized from reaction of Ti(OPrⁱ)₃Cl (0.5 equiv) with 1-dialkylamino-3-(3,5-dimethyl-pyrazol-1-yl)-propan-2-ol compounds in the presence of triethylamine (0.5 equiv), are pseudo-octahedral with each RR′-admpzp ligand κ²-O,N(pyrazolyl) coordinated to the titanium center. In solution, 2a-c adopt isomeric structures that are in dynamic equilibrium. At 23 °C, 2a-c/1000 MAO catalyst systems furnished high molecular weight polymers with narrow molecular weight distributions (M_w/M_n = 2.7-2.8). At 100 °C, 2a-c/MAO catalyst systems exhibited increased polymerization activity and 2c/1000 MAO system furnished high molecular weight polyethylene with a molecular weight distribution (M_w/M_n = 2.1) that is close to that found for single-site catalysts.