Improper hydrogen bonding and motional narrowing in binary mixtures of 2‐ and 3‐bromopyridine in methanol probed by polarized Raman study and DFT calculations

A concentration‐dependent Raman study of the ν(C Br) stretching and trigonal bending modes of 2‐ and 3‐Br‐pyridine (2Br‐p and 3Br‐p) in CH₃OH was performed at different mole fractions of the reference molecule, 2Br‐p/3Br‐p, from 0.1 to 0.9 in order to understand the origin of blue/red wavenumber shifts of the vibrational modes due to hydrogen‐bond formation. The appearance of additional Raman bands in these binary systems at ∼617 cm⁻¹in the case of 2Br‐p and at ∼618 cm⁻¹ in the case of 3Br‐p compared to neat bromopyridine derivatives were attributed to specific hydrogen‐bonded complexes formed in the mixtures. The interpretation of experimental results is supported by density functional calculations on optimized geometries and vibrational wavenumbers of 2Br‐p and 3Br‐p and a series of hydrogen‐bonded complexes with methanol. The parameters obtained from these calculations were used for a qualitative explanation of the blue/red shifts. The wavenumber shifts and linewidth changes for the ν(C Br) stretching and trigonal bending modes as a function of concentration reveal that the caging effects leading to motional narrowing and diffusion‐causing line broadening are simultaneously operative, in addition to the blue shift caused due to hydrogen bonding. Copyright © 2007 John Wiley & Sons, Ltd.     

Characterization of Ir(ppy)3 and [Ir(ppy)2 bpy]+ by infrared,Raman spectra and surface‐enhanced Raman scattering

The Raman and infrared spectra of fac ‐tris(2‐phenylpyridinato‐N,C2′)iridium(III), Ir(ppy)₃ and surface‐enhanced resonance Raman spectra of bis(2‐phenyl pyridinato‐) (2,2′bipyridine) iridium (III), [Ir(ppy)₂ (bpy)]⁺ cation were recorded in the wavenumber range 150–1700 cm⁻¹, and complete vibrational analyses of Ir(ppy)₃ and [Ir(ppy)₂ (bpy)]⁺ were performed. Most of the vibrational wavenumbers were calculated with density‐functional theory agree with experimental data. On the basis of the results of calculation and comparison of the spectra of both complexes and their analogue [Ru(bpy)₃]²⁺, we assign the vibrational wavenumbers for metal–ligand modes; metal–ligand stretching wavenumbers are 277/307 and 261/236 cm⁻¹ for Ir(ppy)₃, and 311/324, 257/270, 199/245 cm⁻¹ for [Ir(ppy)₂ bpy]⁺. Surface‐enhanced Raman scattering spectra of [Ir(ppy)₂ bpy]²⁺ were measured at two wavelengths on the red and blue edges of the low‐energy metal‐to‐ligand charge‐transfer band. According to the enhanced Raman intensities for the vibrational modes of both ligands ppy and bpy, the unresolved charge‐transfer band is deduced to consist of charge‐transfer transitions from the triplet metal to both ligands ppy and bpy. Copyright © 2010 John Wiley & Sons, Ltd.     

Vibrational spectroscopic and force field studies of copper(II) chloride and bromide compounds,and crystal structure of KCuBr3

Vibrational spectroscopic and force field studies have been performed of 15 related copper(II) chloride and copper(II) bromide compounds, including hydrated salts crystallizing in ternary aqueous systems with alkali and ammonium halides. For halocuprates with distorted octahedral coordination characteristic stretching Raman wavenumbers, corresponding to symmetric stretching Cu^II X modes in the equatorial plane, were found in the ranges 247–288 cm⁻¹ for X = Cl, and 173–189 cm⁻¹ for X = Br, while the low‐wavenumber stretching modes for the weaker axial Cu X interactions varied considerably. The tetrahedral coordination for Cs₂CuCl₄ and Cs₂CuBr₄ leads to somewhat lower Cu X symmetric stretching wavenumbers, 295 and 173 cm⁻¹, respectively. The assignments of the copper–ligand stretching vibrations were performed with the aid of normal coordinate calculations. Correlations between force constants, averaged Cu X stretching wavenumbers and bond distances have been evaluated considering the following aspects: (1) Jahn–Teller tetragonal distortion (axial elongation) of the octahedral copper(II) coordination environment, (2) differences between terminal and bridging halide ligands (3) effects of coordinated water and the influence of outer‐sphere cations. Force constant ratios for terminal and bridging metal–halide bonds reveal characteristic differences between planar and tetrahedrally coordinated M₂X₆ species. In the hydrated copper(II) halide complexes, the halide ligands are more strongly bound than coordinated water molecules. The crystal structure of KCuBr₃ (K₂Cu₂Br₆), which was determined to provide structural information for the force field analyses, contains stacks of planar dimeric [Cu₂Br₆]²⁻ complexes held together by weak axial Cu Br interactions. Copyright © 2007 John Wiley & Sons, Ltd.     

Metal–metal bonding and structures of trinickel and tricobalt dipyridylamido complexes from surface‐enhanced Raman spectra

We recorded surface‐enhanced Raman scattering (SERS) spectra of metal‐string complexes Co₃(dpa)₄ Cl₂ [di(2‐pyridyl)amido (dpa)], Ni₃(dpa)₄ Cl₂ and the oxidized form of the Ni₃ complex to determine their vibrational wavenumbers and to investigate their structures. For SERS measurements these complexes were adsorbed on silver nanoparticles in aqueous solution to eliminate the constraint of a crystal lattice and the complexes remain in thermal equilibrium. From our analysis of the vibrational normal modes we assigned the SERS lines at 242 and 276 cm⁻¹ to Ni₃ and Co₃ symmetric‐stretching modes of the symmetric form. For Co₃ (dpa)₄Cl₂ a Raman line at 383 cm⁻¹ was assigned to the Co Co stretching mode of the unsymmetric form. The wavenumber of the Ni₃ symmetric‐stretching mode of the oxidized form [Ni₃(dpa)₄]³⁺ is 274 cm⁻¹, greater than that for neutral Ni₃(dpa)₄Cl₂, in agreement with a prediction of delocalized molecular‐orbital theory that an electron is removed from an antibonding orbital after oxidation. The experimental data show that the SERS technique serves as an excellent tool to observe the variation of metal–metal bonding during an oxidation or reduction reaction. Copyright © 2010 John Wiley & Sons, Ltd.     

Density functional theory calculation and vibrational spectral analysis of 4‐hydroxy‐3‐(3‐oxo‐1‐phenylbutyl)‐2H‐1‐benzopyran‐2‐one

The Fourier transform infrared (4000–400 cm⁻¹) and Fourier transform Raman (3500–500 cm⁻¹) spectra of 4‐hydroxy‐3‐(3‐oxo‐1‐phenylbutyl)‐2H‐1‐benzopyran‐2‐one (Warfarin) have been measured and calculated. The structure optimization has been made using density functional theory (DFT) calculations. Complete vibrational assignments of the observed spectra have been compared with theoretical wavenumbers. The wavenumber increasing in the methyl group shows the electronic hyperconjugation effect. The natural bond orbital (NBO) analysis reveals the hyperconjugation interaction and the intramolecular hydrogen bonding. The first‐order hyperpolarizability has been calculated. Copyright © 2009 John Wiley & Sons, Ltd.     

Lattice dynamics of Al‐containing MAX‐phase carbides: a first‐principle study

A systematic study on lattice dynamics of M_{n + 1}AlC_n (n = 1–3) phases using first‐principle calculations is reported, where the Raman‐active and infrared‐active (IR) modes are emphasized. The highest phonon wavenumber is related to the vibration of C atoms. The ‘imaginary wavenumber’ in the phonon spectrum of Nb₃AlC₂ contributes to the composition gap in Nb‐Al‐C system (Nb₂AlC and Nb₄AlC₃ do appear in experiments, but there are no experimental reports on Nb₃AlC₂). The full set of Raman‐active and IR‐active modes in the 211, 312, and 413 M_{n + 1}AX_n phases is identified, with the corresponding Raman and IR wavenumbers. The 211, 312, and 413 M_{n + 1}AX_n phases have 4, 6, and 8 IR‐active modes, respectively. There is no distinct difference among the wavenumber ranges of IR‐active modes for 211, 312, and 413 phases, with the highest wavenumber of 780 cm⁻¹ in Ta₄AlC₃. The Raman wavenumbers of M₂AlC phases all decrease with increasing the d‐electron shell number of transition metal M. However, this case is valid only for the Raman‐active modes with low wavenumbers of M₃AlC₂ and M₄AlC₃. Copyright © 2015 John Wiley & Sons, Ltd.     

Vibrational spectroscopic studies and DFT calculations of 4‐fluoro‐N‐(2‐hydroxy‐4‐nitrophenyl)benzamide

Fourier transform infrared (FT‐IR) and FT‐Raman spectra of 4‐fluoro‐N‐(2‐hydroxy‐4‐nitrophenyl)benzamide were recorded and analyzed. The vibrational wavenumbers and corresponding vibrational assignments were examined theoretically using the Gaussian03 set of quantum chemistry codes. The red‐shift of the NH‐stretching wavenumber in the infrared (IR) spectrum from the computed wavenumber indicates the weakening of the NH bond resulting in proton transfer to the neighboring oxygen atom. The simultaneous IR and Raman activation of the CO‐stretching mode gives the charge transfer interaction through a π‐conjugated path. Copyright © 2008 John Wiley & Sons, Ltd.     

Dussertite BaFe3+3(AsO4)2(OH)5—a Raman spectroscopic study of a hydroxy‐arsenate mineral

The mineral dussertite, a hydroxy‐arsenate mineral with formula BaFe³⁺₃(AsO₄)₂(OH)₅, has been studied by Raman spectroscopy complemented with infrared spectroscopy. The spectra of three minerals from different origins were investigated and proved to be quite similar, although some minor differences were observed. In the Raman spectra of the Czech dussertite, four bands are observed in the 800–950 cm⁻¹ region. The bands are assigned as follows: the band at 902 cm⁻¹ is assigned to the (AsO₄)³⁻ν₃ antisymmetric stretching mode, the one at 870 cm⁻¹ to the (AsO₄)³⁻ν₁ symmetric stretching mode, and those at 859 and 825 cm⁻¹ to the As‐OM^{2 + /3+} stretching modes and/or hydroxyl bending modes. Raman bands at 372 and 409 cm⁻¹ are attributed to the ν₂ (AsO₄)³⁻ bending mode and the two bands at 429 and 474 cm⁻¹ are assigned to the ν₄ (AsO₄)³⁻ bending mode. An intense band at 3446 cm⁻¹ in the infrared spectrum and a complex set of bands centred upon 3453 cm⁻¹ in the Raman spectrum are attributed to the stretching vibrations of the hydrogen‐bonded (OH)⁻ units and/or water units in the mineral structure. The broad infrared band at 3223 cm⁻¹ is assigned to the vibrations of hydrogen‐bonded water molecules. Raman spectroscopy identified Raman bands attributable to (AsO₄)³⁻ and (AsO₃OH)²⁻ units. Copyright © 2010 John Wiley & Sons, Ltd.     

Spectroscopic and computational studies on self‐assembly complexes of bis(pyrrol‐2‐ ylmethyleneamine) ligands linked by alkyl spacers with Cu(II)

Bis(pyrrol‐2‐ylmethyleneamine) ligands and their mononuclear monomeric and dinuclear dimeric self‐assembly complexes with Cu(II) were investigated by means of IR and Raman spectroscopies and density functional theory. The ground‐state geometries were calculated by using the Becke Lee Yang Parr composite exchange‐correlation functional (B3LYP) and a combined basis set (LanL2DZ for Cu; 6–31G(d) for C, H, N), and they were compared with the single‐crystal X‐ray diffraction (XRD) structures. The DFT‐calculated Cu N bond lengths are generally higher by 0.001–0.040 Å than those determined through XRD. The vibrational spectra were also calculated at the same level of theory for the optimized geometries. The calculated wavenumbers were scaled by a uniform scaling factor and compared with the experimental fundamentals. The predicted spectra are in good agreement with the experimental ones with the deviations generally less than 30 cm⁻¹. In comparison with the spectra of the ligands, the coordination effect shifts the υ(CN) wavenumber by about 50 cm⁻¹ toward a lower value. Because of the weak intermolecular C H···Cu hydrogen bond, the Cu N stretching mode is shifted toward a lower wavenumber. Copyright © 2006 John Wiley & Sons, Ltd.     

FT‐Raman,FT‐IR spectral and DFT studies on 6, 8‐dichloroflavone and 6, 8‐dibromoflavone

In this study, experimental and theoretical vibrational spectral results of the molecular structures of 6,8‐dichloroflavone (6,8‐dcf) and 6,8‐dibromoflavone (6,8‐dbf) are presented. The FT‐IR and FT‐Raman spectra of the compounds have been recorded together between 4000 and 400 cm⁻¹ and 3500–5 cm⁻¹ regions, respectively. The molecular geometry and vibrational wavenumbers of 6,8‐dcf and 6,8‐dbf in their ground state have been calculated by using DFT/B3LYP functional, with 6‐31 + + G(d,p) basis set used in calculations. All calculations were performed with Gaussian03 software. The obtained vibrational wavenumbers and optimized geometric parameters were seen to be in good agreement with the experimental data. Scale factors have been used in order to compare how the calculated and experimental data are in agreement. Theoretical infrared intensities are also reported. Copyright © 2009 John Wiley & Sons, Ltd.     

Overlapping spectral features and new assignment of 2‐propanol in the C–H stretching region

The vibrational spectra of gaseous and liquid 2‐propanol in the C–H stretching region of 2800 ~ 3100 cm⁻¹ were investigated by polarized photoacoustic Raman spectroscopy and conventional Raman spectroscopy, respectively. Using two deuterated samples, that is, CH₃CDOHCH₃ and CD₃CHOHCD₃, the overlapping spectral features between the CH and CH₃ groups were identified. With the aid of depolarization ratio measurements and density functional theory calculations, a new spectral assignment was presented. In the gas phase, the band at 2884 cm⁻¹ was assigned to the overlapping of one CH₃ Fermi resonance mode and a CH stretching of gauche conformer. The bands at 2917 and 2933 cm⁻¹ were assigned to another two CH₃ Fermi resonance modes, but the latter includes weak contribution from CH stretching of trans conformer. The bands at 2950 and 2983 cm⁻¹ were assigned to CH₃ symmetric and antisymmetric stretching, respectively. The spectral features of liquid 2‐propanol are similar to those in the gas phase except for the blue shift of CH and the red shift of CH₃ band positions, which can be attributed to the intermolecular interaction in the liquid state. The new assignments not only clarify the confusions in previous studies from different spectral methods but also provide the reliable groundwork on spectral application of 2‐propanol in the futures. Copyright © 2014 John Wiley & Sons, Ltd.     

A non‐destructive approach for doping profiles characterization by micro‐Raman spectroscopy: the case of B‐implanted Ge

B‐implanted Ge samples have been investigated by micro‐Raman spectroscopy under different excitation wavelengths, with the aim of gaining insights about the B distribution at different depths beneath the sample surface. The intensities, observed under the different excitation wavelengths, of the B–Ge Raman peak at about 545 cm⁻¹, which is due to the local vibrational mode of the substitutional B atoms in the Ge matrix, have been used to calibrate the optical absorption lengths in B‐implanted Ge. Then, by using these calibrated values, a very sharp correlation between the spectral features of the Ge–Ge Raman peak at ~300 cm⁻¹ and the content of substitutional B atoms has been derived. Accordingly, a non‐destructive approach, based on micro‐Raman spectroscopy under different excitation wavelengths, is presented to estimate, at least at the lowest depths, the carrier concentration profiles from the spectral features of the Ge–Ge Raman peak. Copyright © 2014 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the tellurite minerals: emmonsite Fe23+Te34+O9·2H2O and zemannite Mg0.5[Zn2+Fe3+(TeO3)3]4.5H2O

Raman spectroscopy has been used to study zemannite Mg_0.5[Zn²⁺Fe³⁺(TeO₃)₃]4.5H₂O and emmonsite Fe₂³⁺Te₃⁴⁺O₉·2H₂O. Raman bands for zemannite and emmonsite, observed at 740 and 650 cm⁻¹ and at 764 and 788 cm⁻¹, respectively, are attributed to the ν₁ (TeO₃)²⁻ symmetric stretching mode. The splitting of the symmetric stretching mode for emmonsite is in harmony with the results of X‐ray crystallography which shows three non‐equivalent TeO₃ units in the crystal structure. Two bands at 658 and 688 cm⁻¹ are assigned to ν₃ (TeO₃)²⁻ anti‐symmetric stretching modes. Raman bands observed at 372 and 408 cm⁻¹ for zemannite and 397 and 414 cm⁻¹ for emmonsite are attributed to the (TeO₃)²⁻ν₂(A₁) bending mode. The two Raman bands at 400 and 440 cm⁻¹ for emmonsite are ascribed to the ν₄(E) bending modes, while the band at 326 cm⁻¹ is due to the ν₂(A₁) bending vibration. Copyright © 2008 John Wiley & Sons, Ltd.     

Molecular structure,vibrational spectroscopic,first‐order hyperpolarizability and HOMO,LUMO studies of 3‐hydroxy‐2‐naphthoic acid hydrazide

The Fourier‐transform infrared spectrum of 3‐hydroxy‐2‐naphthoic acid hydrazide (3H2NAH) was recorded in the region 4000–400 cm⁻¹. The Fourier‐transform Raman spectrum of 3H2NAH was also recorded in the region 3500–10 cm⁻¹. Quantum chemical calculations of energies, geometrical structure and vibrational wavenumbers of 3H2NAH were carried out by density functional theory (DFT/B3LYP) method with 6‐31G(d,p) as basis set. The difference between the observed and scaled wavenumber values of most of the fundamentals is very small. The values of the electric dipole moment (µ) and the first‐order hyperpolarizability (β) of the investigated molecule were computed using ab initio quantum mechanical calculations. The UV spectrum was measured in ethanol solution. The calculation results also show that the 3H2NAH molecule might have microscopic nonlinear optical (NLO) behavior with non‐zero values. A detailed interpretation of the infrared and Raman spectra of 3H2NAH is also reported based on total energy distribution (TED). The calculated HOMO and LUMO energies shows that charge transfer occur within the molecule. The theoretical FT‐IR and FT‐Raman spectra for the title molecule have also been constructed. Copyright © 2009 John Wiley & Sons, Ltd.     

Identification of hydrogen bond modes in polarized Raman spectra of single crystals of α‐oxalic acid dihydrate

Polarized Raman spectra of single crystals of the α‐polymorphs of protonated and deuterated oxalic acid dihydrate were recorded. The interpretation of the spectra is assisted by periodic DFT calculations using the CRYSTAL06 program and by comparison with the infrared spectra of the polycrystalline material. The agreement between the calculated and observed band wavenumbers is fair in the case of low‐anharmonicity modes, but marked differences appear for the stretching modes that are strongly anharmonic. A very broad feature, extending between ∼2000 and 1200 cm⁻¹, is attributed to OH stretching. Notable is the topping of this feature by distinct bands that can be attributed to CO stretching, H₂O scissoring and COH bending coupled to C O stretching. The assignments are supported by isotope effects. However, deuteration does not notably affect the wavenumber limits of the broad OH stretching band, which suggests that the potential governing the proton dynamics is of the asymmetric double‐minimum type with a very low barrier. The calculated normal coordinates show a strong participation of the bending modes of water molecules in almost all internal acid motions, as well as in the external phonons. Copyright © 2009 John Wiley & Sons, Ltd.     

Conformational equilibria in dihaloheptasilanes X2Si[SiMe(SiMe3)2]2 with X = F,Cl, Br,I: A Raman spectroscopic and quantum chemical DFT study

Equilibrium geometries, stabilities and vibrational wavenumbers for conformers of the dihaloheptasilanes X₂Si[SiMe(SiMe₃)₂]₂ with X = F, Cl, Br and I were calculated at the density functional B3LYP level employing 6‐311G(d) basis sets and SDD pseudopotentials for Br and I. Two spectroscopically distinct low‐energy conformers were located for all four heptasilanes with energy differences of 5.5, 4.7, 1.9 and 1.2 kJ mol⁻¹ for X = F, Cl, Br and I, respectively. Five more conformers were found for difluoroheptasilane and four for X = Cl, Br and I. They all have relative energies larger than 7.5 and up to 17 kJ mol⁻¹ and are negligibly populated at room temperature. Variable temperature solution Raman spectra (−70 to + 100 °C) in a wavenumber range typical for Si Si stretching vibrations (280‐350 cm⁻¹) confirm these results. For X = Br and I, no temperature effects at all could be observed as a very rapid inter‐conversion between the two low‐energy conformers, which is fast even on the time scale of Raman spectroscopy, occurs. For X = Cl, rapid inter‐conversion also occurs, and a third conformer could be detected at higher temperatures (50–100 °C). For X = F, intensity changes with temperature are consistent with the presence of two low‐energy conformers. Copyright © 2007 John Wiley & Sons, Ltd.     

Experimental vibrational spectra (Raman,infrared) and DFT calculations on monomeric and dimeric structures of 2‐ and 6‐bromonicotinic acid

In this work, the Fourier transform infrared and Raman spectra of 2‐bromonicotinic acid and 6‐bromonicotinic acid (abbreviated as 2‐BrNA and 6‐BrNA, C₆H₄BrNO₂) have been recorded in the region 4000–400 and 3500–50 cm⁻¹. The optimum molecular geometry, normal mode wavenumbers, infrared intensities and Raman scattering activities, corresponding vibrational assignments and intermolecular hydrogen bonds were investigated with the help of B3LYP density functional theory (DFT) method using 6‐311++G(d,p) basis set. Reliable vibrational assignments were made on the basis of total energy distribution (TED) calculated with scaled quantum mechanical (SQM) method. From the calculations, the molecules are predicted to exist predominantly as the C1 conformer. Copyright © 2009 John Wiley & Sons, Ltd.     

Density functional theory calculations and vibrational spectra of 2‐bromo‐4‐chloro phenol and 2‐chloro‐4‐nitro phenol

FTIR and FT Raman spectra of 2‐bromo‐4‐chloro phenol (BCP) and 2‐chloro‐4‐nitro phenol (CNP) were recorded in the region 4000–400 and 4000–50 cm⁻¹, respectively. The molecular structure, geometry optimization, and vibrational wavenumbers were investigated. The spectra were interpreted with the aid of normal coordinate analysis based on density functional theory (DFT) using the standard B3LYP/6‐31G** method and basis set combination and was scaled using multiple scale factors, which yield good agreement between the observed and calculated wavenumbers. The results of the calculations are applied to simulate the infrared and Raman spectra of the title compounds, which showed excellent agreement with the observed spectra. Copyright © 2009 John Wiley & Sons, Ltd.     

Raman and infrared spectra,conformational stability,ab initio calculations and vibrational assignment of dimethylsilylisocyanate

The Raman (3200‐30 cm⁻¹) and/or infrared spectra (3500 to 400 cm⁻¹) of gaseous, liquid and solid dimethylsilylisocyanate, (CH₃)₂ Si(H)NCO, have been recorded. The MP2(full) calculations, employing a variety of basis sets with and without diffusion functions, have been used to predict the structural parameters, conformational stability, vibrational fundamental wavenumbers, Raman activities, depolarization values and infrared intensities to support the vibrational assignment. The low wavenumber Raman spectrum of the gas with a significant number of Q‐branches for the SiNC(O) bend is consistent with an essentially linear SiNCO moiety. The ab initio calculations supported this conclusion as all possible orientations of the NCO moiety lead to nearly the same energy. This result is at variance with the conclusion from the electron diffraction study that the heavy atom skeleton was bent with an angle of 152(5)° with one stable cis conformer. It is believed that this reported angle difference from 180° is due to the shrinkage effect. The SiH distance of 1.486 Å has been obtained from the isolated SiH stretching wavenumber. From the adjustment of the ab initio MP2(full)/6‐311+G(d,p) predicted structural parameters, a proposed structure is reported, which is expected to give rotational constants within a few megahertz of the actual ones. These experimental and theoretical results are compared with the corresponding quantities of similar molecules. Copyright © 2009 John Wiley & Sons, Ltd.