Molecular structure,vibrational spectroscopic,first‐order hyperpolarizability and HOMO,LUMO studies of 3‐hydroxy‐2‐naphthoic acid hydrazide

The Fourier‐transform infrared spectrum of 3‐hydroxy‐2‐naphthoic acid hydrazide (3H2NAH) was recorded in the region 4000–400 cm⁻¹. The Fourier‐transform Raman spectrum of 3H2NAH was also recorded in the region 3500–10 cm⁻¹. Quantum chemical calculations of energies, geometrical structure and vibrational wavenumbers of 3H2NAH were carried out by density functional theory (DFT/B3LYP) method with 6‐31G(d,p) as basis set. The difference between the observed and scaled wavenumber values of most of the fundamentals is very small. The values of the electric dipole moment (µ) and the first‐order hyperpolarizability (β) of the investigated molecule were computed using ab initio quantum mechanical calculations. The UV spectrum was measured in ethanol solution. The calculation results also show that the 3H2NAH molecule might have microscopic nonlinear optical (NLO) behavior with non‐zero values. A detailed interpretation of the infrared and Raman spectra of 3H2NAH is also reported based on total energy distribution (TED). The calculated HOMO and LUMO energies shows that charge transfer occur within the molecule. The theoretical FT‐IR and FT‐Raman spectra for the title molecule have also been constructed. Copyright © 2009 John Wiley & Sons, Ltd.     

FT‐Raman spectroscopic spectra on 3‐phenylpropylamine inclusion compounds

Some new Hofmann‐3‐phenylpropylamine‐type clathrates with chemical formulae of M(3‐phenylpropylamine)₂ Ni(CN)₄. 2G (MNi or Co, G = 1,2‐dichlorobenzene or 1,3‐dichlorobenzene) have been prepared and their Fourier transform infrared(FT‐IR; 4000–400 cm⁻¹), far‐infrared (600–100 cm⁻¹) and FT‐Raman (4000–60 cm⁻¹) spectra are reported. The ligand molecule, guest molecules, polymeric sheet and metal‐ligand bands of the clathrates are assigned in detail. The compounds are also characterized by thermal gravimetric analysis (TGA), differential thermal analysis (DTA), elemental analysis and magnetic susceptibility measurements. From the results, the monodentate 3‐phenylpropylamine ligand molecule bonds to the metal atom of |M‐Ni(CN)₄ | _∞ polymeric layers in the trans‐gauche‐gauche (TGG) form, and 1,2‐dichlorobenzene or 1,3‐dichlorobenzene molecules are guested by this structure revealing the inclusion ability of the host complexes. Copyright © 2010 John Wiley & Sons, Ltd.     

FT‐Raman,FT‐IR spectra and DFT calculations on monomeric and dimeric structures of 5‐fluoro‐ and 5‐chloro‐salicylic acid

The experimental and theoretical study on the structures and vibrations of 5‐fluoro‐salicylic acid and 5‐chloro‐salicylic acid (5‐FSA and 5‐ClSA, C₇H₅FO₃ and C₇H₅ClO₃) is presented. The Fourier transform infrared spectra (4000–400 cm⁻¹) and the Fourier transform Raman spectra (4000–50 cm⁻¹) of the title molecules in the solid phase were recorded. The molecular structures, vibrational wavenumbers, infrared intensities, Raman intensities and Raman scattering activities were calculated for a pair of molecules linked by the intermolecular O H···O hydrogen bond. The geometrical parameters and energies of 5‐FSA and 5ClSA were obtained for all eight conformers/isomers from density functional theory (DFT) (B3LYP) with 6‐311++G(d,p) basis set calculations. The computational results identified the most stable conformer of 5‐FSA and 5‐ClSA as the C1 form. The complete assignments were performed on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. The spectroscopic and theoretical results were compared with the corresponding properties for 5‐FSA and 5‐ClSA monomers and dimer of C1 conformer. The optimized bond lengths, bond angles and calculated wavenumbers showed the best agreement with the experimental results. Copyright © 2010 John Wiley & Sons, Ltd.     

Experimental vibrational spectra (Raman,infrared) and DFT calculations on monomeric and dimeric structures of 2‐ and 6‐bromonicotinic acid

In this work, the Fourier transform infrared and Raman spectra of 2‐bromonicotinic acid and 6‐bromonicotinic acid (abbreviated as 2‐BrNA and 6‐BrNA, C₆H₄BrNO₂) have been recorded in the region 4000–400 and 3500–50 cm⁻¹. The optimum molecular geometry, normal mode wavenumbers, infrared intensities and Raman scattering activities, corresponding vibrational assignments and intermolecular hydrogen bonds were investigated with the help of B3LYP density functional theory (DFT) method using 6‐311++G(d,p) basis set. Reliable vibrational assignments were made on the basis of total energy distribution (TED) calculated with scaled quantum mechanical (SQM) method. From the calculations, the molecules are predicted to exist predominantly as the C1 conformer. Copyright © 2009 John Wiley & Sons, Ltd.     

Molecular structure,spectroscopic (FTIR,FTIR gas phase,FT‐Raman) first‐order hyperpolarizability and HOMO–LUMO analysis of 4‐methoxy‐2‐methyl benzoic acid

Vibrational spectral analysis was carried out for 4‐methoxy‐2‐methyl benzoic acid (4M2MBA) by using Fourier transform infrared (FT‐IR) (solid, gas phase) and FT‐Raman spectroscopy in the range of 400–4000 and 10–3500 cm⁻¹ respectively. The effects of molecular association through O H···O hydrogen bonding have been described by the single dimer structure. The theoretical computational density functional theory (DFT) and Hatree‐Fock (HF) method were performed at 6–311++G(d,p) levels to derive the equilibrium geometry, vibrational wavenumbers, infrared intensities and Raman scattering activities. The scaled theoretical wavenumbers were also shown to be in good agreement with experimental data. The first‐order hyperpolarizability (β₀) of this novel molecular system and related properties (β, α₀ and Δα) of 4M2MBA are calculated using the B3LYP/cc‐pvdz basis set, based on the finite‐field approach. A detailed interpretation of the infrared and Raman spectra of 4M2MBA is reported. The theoretical spectrograms for FT‐IR and FT‐Raman spectra of the title molecule were also constructed and compared with the experimental one. Copyright © 2010 John Wiley & Sons, Ltd.     

Fourier‐transform infrared and Raman spectra,vibrational assignment and density functional theory calculations of 1,4,5‐triazanaphthalene

The Fourier‐transform infrared (FT‐IR) (4000–50 cm⁻¹) and Raman spectra (3500–100 cm⁻¹) of 1,4,5‐triazanaphthalene in polycrystalline state were measured. Comparison between the spectra by two techniques, a series of density functional theory (DFT) calculations and the spectral behaviour upon deuteration were used for the assignment of the vibrational spectra of the title compound. The calculated vibrational wavenumbers by the B3LYP density functionals are generally consistent with the observed spectra. Copyright © 2009 John Wiley & Sons, Ltd.     

Density functional theory study and vibrational analysis of FT‐IR and FT‐Raman spectra of N‐hydroxyphthalimide

The Fourier transform infrared (FT‐IR) spectrum of N‐hydroxyphthalimide has been recorded in the range of 4000–400 cm⁻¹, and the Fourier transform Raman (FT‐Raman) spectrum of N‐hydroxyphthalimide has been recorded in the range of 4000–50 cm⁻¹. With the hope of providing more and effective information on the fundamental vibrations, the Density Functional Theory (DFT)‐Becke3‐Lee‐Yang‐Parr (B3LYP) level with 6‐31G* basis set has been employed in quantum chemical analysis, and normal coordinate analysis has been performed on N‐hydroxyphthalimide by assuming C_s symmetry. The computational wavenumbers are in good agreement with the observed results. The theoretical spectra obtained along with intensity data agree well with the observed spectra. Copyright © 2009 John Wiley & Sons, Ltd.     

FT‐Raman,FT‐IR spectral and DFT studies on 6, 8‐dichloroflavone and 6, 8‐dibromoflavone

In this study, experimental and theoretical vibrational spectral results of the molecular structures of 6,8‐dichloroflavone (6,8‐dcf) and 6,8‐dibromoflavone (6,8‐dbf) are presented. The FT‐IR and FT‐Raman spectra of the compounds have been recorded together between 4000 and 400 cm⁻¹ and 3500–5 cm⁻¹ regions, respectively. The molecular geometry and vibrational wavenumbers of 6,8‐dcf and 6,8‐dbf in their ground state have been calculated by using DFT/B3LYP functional, with 6‐31 + + G(d,p) basis set used in calculations. All calculations were performed with Gaussian03 software. The obtained vibrational wavenumbers and optimized geometric parameters were seen to be in good agreement with the experimental data. Scale factors have been used in order to compare how the calculated and experimental data are in agreement. Theoretical infrared intensities are also reported. Copyright © 2009 John Wiley & Sons, Ltd.     

A joint FTIR,FT‐Raman and scaled quantum mechanical study of 1,3‐dibromo‐2,4,5,6‐tetra‐fluoro benzene (DTB) and 1,2,3,4,5‐pentafluoro benzene (PB)

The liquid phase FTIR and FT‐Raman spectra of 1,3‐dibromo‐2,4,5,6‐tetrafluoro benzene (DTB) and 1,2,3,4,5‐pentafluoro benzene (PB) were recorded in the regions 4000–400 cm⁻¹ and 4000–50 cm⁻¹, respectively. The spectra were interpreted with the aid of normal coordinate analysis following full structure opti1mization and force field calculations based on the density functional theory using the standard B3LYP/6‐31G* method and basis set combination. The scaled force field reproduced the experimental wavenumbers of the molecule for DTFB and PFB, respectively. The effects of halogen substituents on the structure and vibrational wavenumbers have been investigated. Assignments of fundamental modes were made based on the comparison between calculated and experimental results. Copyright © 2009 John Wiley & Sons, Ltd.     

Density functional theory calculations and vibrational spectra of 2‐bromo‐4‐chloro phenol and 2‐chloro‐4‐nitro phenol

FTIR and FT Raman spectra of 2‐bromo‐4‐chloro phenol (BCP) and 2‐chloro‐4‐nitro phenol (CNP) were recorded in the region 4000–400 and 4000–50 cm⁻¹, respectively. The molecular structure, geometry optimization, and vibrational wavenumbers were investigated. The spectra were interpreted with the aid of normal coordinate analysis based on density functional theory (DFT) using the standard B3LYP/6‐31G** method and basis set combination and was scaled using multiple scale factors, which yield good agreement between the observed and calculated wavenumbers. The results of the calculations are applied to simulate the infrared and Raman spectra of the title compounds, which showed excellent agreement with the observed spectra. Copyright © 2009 John Wiley & Sons, Ltd.     

IR/Raman spectroscopy and DFT calculations of cyclic di‐amino acid peptides. Part III: comparison of solid state and solution structures of cyclo(L‐Ser‐L‐Ser)

B3‐LYP/cc‐pVDZ calculations of the gas‐phase structure and vibrational spectra of the isolated molecule cyclo(L ‐Ser‐L ‐Ser), a cyclic di‐amino acid peptide (CDAP), were carried out by assuming C₂ symmetry. It is predicted that the minimum‐energy structure is a boat conformation for the diketopiperazine (DKP) ring with both L ‐seryl side chains being folded slightly above the ring. An additional structure of higher energy (15.16 kJ mol⁻¹) has been calculated for a DKP ring with a planar geometry, although in this case two fundamental vibrations have been calculated with imaginary wavenumbers. The reported X‐ray crystallographic structure of cyclo(L ‐Ser‐L ‐Ser), shows that the DKP ring displays a near‐planar conformation, with both the two L ‐seryl side chains being folded above the ring. It is hypothesized that the crystal packing forces constrain the DKP ring in a planar conformation and it is probable that the lower energy boat conformation may prevail in the aqueous environment. Raman scattering and Fourier‐transform infrared (FT‐IR) spectra of solid state and aqueous solution samples of cyclo(L ‐Ser‐L ‐Ser) are reported and discussed. Vibrational band assignments have been made on the basis of comparisons with the calculated vibrational spectra and band wavenumber shifts upon deuteration of labile protons. The experimental Raman and IR results for solid‐state samples show characteristic amide I vibrations which are split (Raman: 1661 and 1687 cm⁻¹, IR: 1666 and 1680 cm⁻¹), possibly due to interactions between molecules in a crystallographic unit cell. The cis amide I band is differentiated by its deuterium shift of ∼30 cm⁻¹, which is larger than that previously reported for trans amide I deuterium shifts. A cis amide II mode has been assigned to a Raman band located at 1520 cm⁻¹. The occurrence of this cis amide II mode at a wavenumber above 1500 cm⁻¹ concurs with results of previously examined CDAP molecules with low molecular weight substituents on the C^α atoms, and is also indicative of a relatively unstrained DKP ring. Copyright © 2009 John Wiley & Sons, Ltd.     

Vibrational spectroscopy investigation using density functional theory on 7‐chloro‐3‐methyl‐2H‐1,2,4‐ benzothiadiazine 1,1‐dioxide

The solid phase Fourier transform infrared (FTIR) and Fourier transform (FT) Raman spectral analysis of 7‐chloro‐3‐methyl‐2H‐1,2,4‐benzothiadiazine 1,1‐dioxide (diazoxide), an antihypertensive agent was carried out along with density functional computations. The optimized geometry, wavenumber and intensity of the vibrational bands of diazoxide were obtained by DFT‐B3LYP level of theory with complete relaxation in the potential energy surface using 6‐31G(d,p) basis set. A complete vibrational assignment aided by the theoretical harmonic frequency analysis has been proposed. The harmonic vibrational wavenumbers calculated have been compared with experimental FTIR and FT Raman spectra. The observed and the calculated wavenumbers are found to be in good agreement. The experimental spectra coincide satisfactorily with those of calculated spectra. Copyright © 2009 John Wiley & Sons, Ltd.     

Density functional theory calculations and vibrational spectra of p‐bromonitrobenzene

FT‐IR and FT‐Raman spectra of p‐bromonitrobenzene (p‐BNB) have been recorded in the region 4000–400 cm⁻¹ and 4000–50 cm⁻¹, respectively. The molecular structure, geometry optimization, vibrational wavenumbers have been investigated. The spectra were interpreted with the aid of normal coordinate analysis based on the density functional theory (DFT) using the standard B3LYP/6‐31G method and basis set combination and was scaled using multiple scale factors yielding good agreement between observed and calculated wavenumbers. The results of the calculations are applied to simulate infrared and Raman spectra of the title compound which showed reasonable agreement with the observed spectra. Copyright © 2009 John Wiley & Sons, Ltd.     

Vibrational spectroscopic studies of the structure of di‐amino acid peptides. Part II: cyclo(L‐Asp‐L‐Asp) in the solid state and in aqueous solution

Solid‐state protonated and N,O‐deuterated Fourier transform infrared (IR) and Raman scattering spectra together with the protonated and deuterated Raman spectra in aqueous solution of the cyclic di‐amino acid peptide cyclo(L ‐Asp‐L ‐Asp) are reported. Vibrational band assignments have been made on the basis of comparisons with previously cited literature values for diketopiperazine (DKP) derivatives and normal coordinate analyses for both the protonated and deuterated species based upon DFT calculations at the B3‐LYP/cc‐pVDZ level of the isolated molecule in the gas phase. The calculated minimum energy structure for cyclo(L ‐Asp‐L ‐Asp), assuming C₂ symmetry, predicts a boat conformation for the DKP ring with both the two L ‐aspartyl side chains being folded slightly above the ring. The CO stretching vibrations have been assigned for the side‐chain carboxylic acid group (e.g. at 1693 and 1670 cm⁻¹ in the Raman spectrum) and the cis amide I bands (e.g. at 1660 cm⁻¹ in the Raman spectrum). The presence of two bands for the carboxylic acid CO stretching modes in the solid‐state Raman spectrum can be accounted for by factor group splitting of the two nonequivalent molecules in a crystallographic unit cell. The cis amide II band is observed at 1489 cm⁻¹ in the solid‐state Raman spectrum, which is in agreement with results for cyclic di‐amino acid peptide molecules examined previously in the solid state, where the DKP ring adopts a boat conformation. Additionally, it also appears that as the molecular mass of the substituent on the C^α atom is increased, the amide II band wavenumber decreases to below 1500 cm⁻¹; this may be a consequence of increased strain on the DKP ring. The cis amide II Raman band is characterized by its relatively small deuterium shift (29 cm⁻¹), which indicates that this band has a smaller N H bending contribution than the trans amide II vibrational band observed for linear peptides. Copyright © 2009 John Wiley & Sons, Ltd.     

FT‐Raman and FT‐IR spectral and quantum chemical studies on some flavonoid derivatives: Baicalein and Naringenin

In this study, the experimental and theoretical results on the molecular structures of some flavonoid derivatives (Baicalein and Naringenin) are presented. The FT‐IR and FT‐Raman spectra of the compounds have been recorded together for the first time between 4000–400 cm⁻¹ and 3500–5 cm⁻¹ regions, respectively. The molecular geometry and vibrational wavenumbers of the compounds have been also calculated in their ground states by using ab initio HF and DFT/B3LYP functional with 6‐31G(d,p) basis set used in calculations. The calculations were utilized to the C₁ symmetries of the molecules. All calculations were performed with Gaussian 98 software. The obtained vibrational wavenumbers and optimized geometric parameters were seen to be in good agreement with the experimental data. Scale factors have been used in order to compare how the calculated and experimental data are in agreement. Theoretical infrared intensities were also reported. Copyright © 2008 John Wiley & Sons, Ltd.     

Experimental and theoretical FT‐IR and FT‐Raman spectroscopic analysis of N1‐methyl‐2‐chloroaniline

In this work, the experimental and theoretical vibrational spectra of N1‐methyl‐2‐chloroaniline (C₇H₈NCl) were studied. FT‐IR and FT‐Raman spectra of the title molecule in the liquid phase were recorded in the region 4000–400 cm^?1 and 3500–50 cm^?1, respectively. The structural and spectroscopic data of the molecule in the ground state were calculated by using density functional method (B3LYP) with the 6‐311++G(d,p) basis set. The vibrational frequencies were calculated and scaled values were compared with experimental FT‐IR and FT‐Raman spectra. The observed and calculated frequencies are found to be in good agreement. The complete assignments were performed on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. ¹³C and ¹H NMR chemical shifts results were compared with the experimental values. The optimized geometric parameters (bond lengths and bond angles) were given and are in agreement with the corresponding experimental values of aniline and p‐methyl aniline. Copyright © 2008 John Wiley & Sons, Ltd.     

DFT,FT‐Raman,FT‐IR and NMR studies of 2‐fluorophenylboronic acid

The experimental and theoretical vibrational spectra of 2‐fluorophenylboronic acid (2fpba) were studied. The Fourier transform Raman and Fourier transform infrared spectra of the 2fpba molecule were recorded in the solid phase. The structural and spectroscopic analysis of the molecule was carried out by using Hartree‐Fock and density functional harmonic calculations. For the title molecule, only one form was found to be the most stable structure, by using B3LYP level with the 6‐31++G(d,p) basis set. Selected experimental bands were assigned and characterized on the basis of the scaled theoretical wavenumbers by their total energy distribution (TED). The ¹H and ¹³C nuclear magnetic resonance (NMR) chemical shifts of the 2fpba molecule were calculated using the Gauge‐Invariant‐ atomic orbital (GIAO) method in DMSO solution using IEF‐PCM model and compared with the experimental data. Finally, geometric parameters, vibrational wavenumbers and chemical shifts were compared with available experimental data of the molecule. Copyright © 2009 John Wiley & Sons, Ltd.     

Spectroscopic and computational studies on self‐assembly complexes of bis(pyrrol‐2‐ ylmethyleneamine) ligands linked by alkyl spacers with Cu(II)

Bis(pyrrol‐2‐ylmethyleneamine) ligands and their mononuclear monomeric and dinuclear dimeric self‐assembly complexes with Cu(II) were investigated by means of IR and Raman spectroscopies and density functional theory. The ground‐state geometries were calculated by using the Becke Lee Yang Parr composite exchange‐correlation functional (B3LYP) and a combined basis set (LanL2DZ for Cu; 6–31G(d) for C, H, N), and they were compared with the single‐crystal X‐ray diffraction (XRD) structures. The DFT‐calculated Cu N bond lengths are generally higher by 0.001–0.040 Å than those determined through XRD. The vibrational spectra were also calculated at the same level of theory for the optimized geometries. The calculated wavenumbers were scaled by a uniform scaling factor and compared with the experimental fundamentals. The predicted spectra are in good agreement with the experimental ones with the deviations generally less than 30 cm⁻¹. In comparison with the spectra of the ligands, the coordination effect shifts the υ(CN) wavenumber by about 50 cm⁻¹ toward a lower value. Because of the weak intermolecular C H···Cu hydrogen bond, the Cu N stretching mode is shifted toward a lower wavenumber. Copyright © 2006 John Wiley & Sons, Ltd.     

Raman and DFT study of hydrogen‐bonded 2‐ and 3‐chloropyridine with methanol

Precise polarized Raman measurements of 2‐chloropyridine (2Clpy) in the region 560–1060 cm⁻¹ and 3‐chloropyridine (3Clpy) in the region 680–1080 cm⁻¹ at different concentrations in mole fraction of methanol were made to calculate the isotropic part of the Raman spectra, which has contributions only from vibrational dephasing. A detailed analysis of the Raman spectra was carried out to see the variation of peak position and linewidth. The dephasing is mode specific. The trigonal bending mode of 3Clpy has two components when it is mixed with methanol. The relative intensities of these two bands are used to calculate the equilibrium constants. The ring‐breathing mode of 3Clpy, on the other hand, remains single in the mixture. The appearance of a new band corresponding to the trigonal bending mode, as well as the nonappearance of that of the ring‐breathing mode, is also shown by the density functional theory (DFT) study of gas phase and methanol‐solvated complexes. The vibrational dephasing time for the hydrogen‐bonded ring‐breathing mode is calculated from the linear Raman linewidth and peak position data. For other modes, it was not possible to calculate the dephasing time because of the nonavailability of a suitable theoretical model. Contrary to 3Clpy, in 2Clpy the ring‐breathing mode becomes a doublet but the trigonal bending mode remains single. It is seen that the hydrogen‐bonding capacity of chloropyridines is highly influenced by the position of the Cl atom. Single and double components of these modes are also explained by DFT calculations. We obtained excellent match of the experimental and theoretical spectra with the B3LYP/6‐31 + G (d,p) method. Copyright © 2008 John Wiley & Sons, Ltd.     

Raman spectroscopy and characterisation of α‐gallium oxyhydroxide and β‐gallium oxide nanorods

Raman spectroscopy complemented by infrared spectroscopy was used to characterise both gallium oxyhydroxide (α‐GaO(OH)) and gallium oxide (β‐Ga₂O₃) nanorods synthesised with and without the surfactants using a soft chemical methodology at low temperatures. Nano‐ to micro‐sized gallium oxyhydroxide and gallium oxide materials were characterised and analysed by both X‐ray diffraction and Raman spectroscopy. Rod‐like GaO(OH) crystals with average length of ∼2.5 µm and width of 1.5 µm were obtained. Upon thermally treating gallium oxyhydroxide GaO(OH) to 900 °C, β‐Ga₂O₃ was synthesised retaining the initial GaO(OH) morphology. Raman spectroscopy has been used to study the structure of nanorods of GaO(OH) and Ga₂O₃ crystals. Raman spectroscopy shows bands characteristic of GaO(OH) at 950 and ∼1000 cm⁻¹ attributed to Ga OH deformation modes. Bands at 261, 275, 433 and 522 cm⁻¹ are assigned to vibrational modes involving Ga OH units. Bands observed at 320, 346, 418 and 472 cm⁻¹ are assigned to the deformation modes of Ga₂O₆ octahedra. Two sharp infrared bands at 2948 and 2916 cm⁻¹ are attributed to the GaO(OH) symmetric stretching vibrations. Raman spectroscopy of Ga₂O₃ provides bands at 630, 656 and 767 cm⁻¹ which are assigned to the bending and stretching of GaO₄ units. Raman bands at 417 and 475 cm⁻¹ are attributed to the symmetric stretching modes of GaO₂ units. The Raman bands at 319 and 347 cm⁻¹ are assigned to the bending modes of GaO₂ units. Copyright © 2008 John Wiley & Sons, Ltd.