中空纤维液-液-液微萃取/HPLC分析人尿液中麻黄碱及伪麻黄碱

建立了中空纤维液-液-液微萃取高效液相色谱对人尿液中的麻黄碱和伪麻黄碱进行纯化、分离、富集以及测定的方法。采用中空纤维三相微萃取装置,考察了影响萃取的因素,确定了萃取条件:中空纤维壁上的有机相为正辛醇,以50μL盐酸溶液(pH 2.0)为接受相,在室温下萃取60 min。该条件下麻黄碱和伪麻黄碱的富集倍数分别为180倍和220倍,两者的线性范围分别为0.01～5 mg/L和0.005～0.75 mg/L,相关系数(r)分别为0.998 2、0.997 8,定量下限分别为0.01、0.005 mg/L。该方法使用极少量的有机溶剂,便可有效地对尿样中麻黄碱和伪麻黄碱进行纯化、分离和富集,萃取效率高,可用于尿液中麻黄碱和伪麻黄碱的同时测定。     

液-液-液微萃取-高效液相色谱法测定人尿液中的美沙酮

建立了液-液-液微萃取与高效液相色谱联用技术快速分析尿样中美沙酮的方法.对有机溶剂种类、体积、样品溶液的pH值、萃取时间、搅拌速度进行了优化.方法的线性范围为0.05～10 mg/L,检出限为0.025 mg/L,相对标准偏差小于5%.     

液-液-液微萃取-高效液相色谱法测定人血浆中的局部麻醉剂

建立了液-液-液微萃取与高效液相色谱联用技术同时测定人血浆中3种局部麻醉剂利多卡因、布比卡因和丁卡因的方法。考察了萃取时间、料液pH值和搅拌速度的影响,取佳萃取条件为萃取溶剂为200μL苯,接受相为1.0μL 0.2 mol/L HC l,搅拌速度为250 r/m in,萃取时间为45 m in。在该条件下,获得了高的富集因子(大于305倍)。方法的线性范围为:利多卡因和布比卡因0.025~5 mg/L,丁卡因0.05~5 mg/L,相关系数大于0.996;检出限依次为0.005、0.015和0.025 mg/L;相对标准偏差小于5%。该方法能有效地去除血浆中复杂基体的干扰,萃取效率高,有机溶剂消耗少,是一种有效、灵敏的同时测定血浆中利多卡因、布比卡因和丁卡因的方法。     

液-液微萃取/高效液相色谱-质谱测定五指毛桃水提取液中的补骨脂素与佛手内酯

建立了一种同时测定五指毛桃水提取液中补骨脂素和佛手内酯的高效液相色谱-电喷雾串联质谱法(HPLC-ESI MSn),并对液-液微萃取前处理方法的影响因素进行了探讨.在优化条件下,补骨脂素在0.55～2200μg·L-1范围内线生关系良好(r=0.9999),佛手内酯在1.00～4000μg·L-1范围内线性关系良好(r...     

尿液中违禁药物的载体促进传递液相微萃取-高效液相色谱法测定

建立了基于载体促进传递的液相微萃取-高效液相色谱法同时测定尿液中违禁药物吗啡、可待因和安非他明的方法.通过在有机相添加极性载体,扩大了液相微萃取的应用范围,对亲水性和疏水性的分析物实现了同时富集.考察了载体浓度、有机溶剂、萃取时间﹑搅拌速率对目标分析物富集因子的影响.在优化的实验条件下,方法的线性范围为0.1 ～5.0 mg·L-1,相关系数大于0.996,检出限低至0.025 mg·L-1,相对标准偏差小于9.2%.该方法用于实际尿样分析,结果满意.     

液-液-液三相液相微萃取-高效液相色谱法检测尿样中的安非他明和氯胺酮

建立了液-液-液三相液相微萃取与高效液相色谱联用技术测定尿样中的安非他明和氯胺酮的方法。考察了萃取溶剂、料液相pH值、搅拌速度、萃取时间和接受相HCl浓度等因素对富集因子的影响,得到了萃取溶剂为300 μL甲苯,料液相pH值为11,接受相为1.0 μL 0.1 mol/L HCl,搅拌速度为600 r/min,萃取时间为50 min的最佳实验条件。在该条件下,获得了较高的富集因子;方法的线性范围为安非他明0.01～10 μg/mL,氯胺酮0.01～5 μg/mL,相对标准偏差均小于2%,检测限均为5 ng/mL (S/N=3)。建立的三相液相微萃取方法能有效地去除复杂基体的干扰,有机溶剂消耗少,萃取效率高,是一种有效、灵敏的样品前处理方法,适合于尿样中安非他明和氯胺酮的测定。     

液相微萃取-高效液相色谱法测定尿样中的利多卡因

应用液相微萃取与高效液相色谱联用技术快速分析尿样中的利多卡因。考察了萃取溶剂、体积、萃取时间及料液pH值对液相微萃取的影响,建立了液相微萃取与高效液相色谱联用技术分析尿样中利多卡因的方法。优化的实验条件为：料液pH值12．0,萃取溶剂为5μL邻苯二甲酸二丁醅,萃取时间40min,搅拌速度80r／min。方法的线性范围为0．2-5mg／L;检出限为0．1mg／L;相对标准偏差小于6．3％。通过液相微萃取后,能有效地去除检测尿样中利多卡因的干扰物质,获得了较高的选择性。该方法简便、快速、灵敏、消耗有机溶剂少,是尿样中利多卡因检测的一种有效方法。     

反相液液微萃取/高效液相色谱测定变压器油中糠酸的含量

以水为萃取剂,建立了变压器油中糠酸含量的反相液液微萃取/高效液相色谱测定方法。通过研究萃取剂的p H值、萃取剂体积、稀释剂用量、萃取时间及离心转速的影响,确定了最优的萃取条件。结果表明:在以中性水为萃取剂,萃取剂体积为150μL,稀释剂比例V油∶V正己烷为3∶1,涡旋萃取时间为5 min,离心转速为5 500 r/min的条件下,水萃取相直接用于高效液相色谱测定,变压器油中糠酸的浓度在0.05~5.00 mg·L-1范围内呈良好线性,相关系数(r)为0.999 9,方法的检出限为9.6μg·L-1,相对标准偏差(RSD,n=6)为1.4%,糠酸的富集倍数为13.6倍。实际老化样品测定的加标回收率为99.7%~105.1%,并对样品中的糠酸进行了HPLC-MS定性分析。该方法简捷有效,为变压器油纸绝缘老化特征量的研究提供了数据支持。     

液液萃取-高效液相色谱法同时测定水基胶中17种邻苯二甲酸酯类物质的残留量

采用液液萃取-高效液相色谱法同时测定水基胶中17种邻苯二甲酸酯类物质的残留量。水基胶样品经水分散后,用乙酸乙酯萃取,萃取液离心后,取上层清液过0.45μm有机相滤膜。以DIONEX Acclaim explosives E2柱为分离柱,以不同体积比的乙腈和水的混合溶液为流动相进行梯度洗脱,在检测波长220nm处进行测定。17种邻苯二甲酸酯的质量浓度均在0.4~20.0mg·L-1范围内与峰面积呈线性关系,方法的检出限(3s)在0.024~0.114mg·L-1之间,测定下限(10s)在0.079~0.379mg·L-1之间。加标回收率在89.7%~101%之间,测定值的相对标准偏差(n=5)小于6.0%。     

分散液液微萃取-高效液相色谱法测定环境水样中2,4-二氯酚

建立了简便、快速、有效的分散液液微萃取-高效液相色谱法测定环境水样中2,4-二氯酚的分析方法。对萃取剂、分散剂的种类和体积、萃取时间、离心时间、盐浓度等影响萃取效率的因素进行了优化。方法的线性范围为1～500μg/L(r=0.9997),相对标准偏差(RSD)为3.8%(n=6),检出限为0.19μg/L。该法适用于环境水样中的痕量2,4-二氯酚的检测。     

Ionic liquid-β-cyclodextrin polymer for the separation/analysis of lornoxicam

Ionic liquid-β-cyclodextrin polymer (ILs-β-CDCP) was firstly synthesised and characterised with FTIR, ¹³C CP/MAS NMR, X-ray powder diffraction, TGA and scanning electron microscope. A novel method of solid phase extraction (SPE) coupled with Ultraviolet–vis spectrophotometry for separation/analysis of lornoxicam was established. ILs-β-CDCP showed a higher adsorption capacity towards lornoxicam than β-CDCP. Adsorption mechanism of ILs-β-CDCP was elucidated by adsorption thermodynamics model, adsorption kinetic model, inclusion constants and FTIR analysis. ILs-β-CDCP exhibited favourable adsorption performance towards lornoxicam from serum and tablet samples. The experimental results herein suggested that ILs-β-CDCP could be successfully applied in the field of pharmic content especially in the treatment of serum.     

Electrochemical quartz crystal microbalance study on the two-electrode-system cyclic voltammetric behavior of Prussian blue films

A two-channel electrochemical quartz crystal microbalance (EQCM) was used to investigate the cyclic voltammetric behavior of two Prussian blue (PB) film-modified Au electrodes in a two-electrode con-figuration in aqueous solution. The redox peaks observed in the two-electrode cyclic voltammogram (CV) are assigned to the intrinsic redox transitions among the Everitt's salt, PB, and Prussian yellow for the film itself, the redox process of the Au substrate and the redox process of small-quantity ferri-/ferrocyanide impurities entrapped in the PB film, as also supported by ultraviolet-visible (UV-Vis) spectroelectrochemical data. The profile of the two-electrode solid-state CV for the PB powder sand-wiched between two gold-coated indium-tin oxide (ITO) electrodes is similar to that for two PB-modified Au electrodes in aqueous solution, implying similar origins for the corresponding redox peaks. The two-channel EQCM method is expected to become a highly effective technique for the studies of the two-electrode electrochemical behaviors of many other species/materials.     

离子液体选择性萃取生物产品

Imidazolium based room temperature ionic liquids have been used to extract selectively L-tryptophan from fermentation broth. BF4 anion was found to enhance dramatically the partitioning of L-tryptophan into ionic liquid phase from aqueous solutions.     

Speciation and Determination of Trace Amount of Inorganic Arsenic in Water,Environmental and Biological Samples

A new speciation and preconcentration method based on dispersive liquid‐liquid microextraction has been developed for trace amounts of As(III) and As(V) in urine and water samples. At pH 4, As(III) is complexed with ammoniumpyrrolidine dithiocarbamate and extracted into 1‐Hexyl‐3‐methylimidazolium hexafluorophosphate, as an ionic liquid (IL) and As(III) is determined by electrothermal atomic absorption spectrometery (ETAAS). Arsenic(V) in the mixing solution containing As(III) and As(V) was reduced by using KI and ascorbic acid in HCl solution and then the procedure was applied to determination of total arsenic. Arsenic(V) was calculated as the difference between the total arsenic content and As(III) content. The effect of various parameters on the recovery of the arsenic ions has been studied. Under the optimum conditions, the enrichment factor 135 was obtained. The proposed method was successfully applied to the determination of trace amounts of As(III) and As(V) in water and biological samples.     

The Phosporylation of Aniline Derivatives in Biphase Systems

Aniline derivatives were phosphorylated in biphase systems using three methods. A comparative study was performed. The best results were obtained when a solid–liquid system was used. This method is the easiest and lead to higher yields (54–81%).     

液体聚异戊二烯的合成与应用研究进展

固态橡胶具有较高的分子量、强度及伸长率,在工业和日常生活中均得到广泛应用.然而,固态橡胶黏度较高,在应用中往往必须引入添加剂.而液体聚异戊二烯是一种液态橡胶,可以作为固态橡胶的软化剂;得益于其特殊的形态和性能,液体聚异戊二烯可望在多方面得到应用.对液体聚异戊二烯的合成与应用进行了评述.     

液体橡皮泥:属性特征、制备策略及应用探索

液体橡皮泥是指空气环境中被颗粒包裹的以可塑性和复杂形状为特征的液体系统,目前已被成功应用于气体传感、蛋白质分析、光催化等领域,并展现出了很多独特优势。这是一种新兴的软物质体系,与被颗粒包裹的形状为类球形的液体弹珠组成相似,但打破了后者的形状单一性。本文从裸液滴和液体弹珠出发,通过对液体形状和颗粒堵塞问题的分析,梳理了液体橡皮泥技术的建立过程。随后,论述了国内外的研究进展,对不同种类液体橡皮泥的制备、特性及应用进行了概括和分析,重点讨论了单层纳米颗粒结构液体橡皮泥的系列研究。最后,围绕液体橡皮泥的概念内涵、制备方法、特性对比、功能应用等问题进行了总结和探讨,并就未来发展方向和研究思路提出了建议。     

Determination of Alkylphenols in Water by Dispersive Liquid–Liquid Microextraction Based on Solid Formation without a Disperser

Dispersive liquid–liquid microextraction based on solid formation without a disperser combined with high-performance liquid chromatography has been developed for the determination of 4-tert-butylphenol, 4-n-nonylphenol, and 4-tert-octylphenol. This method is rapid, easy, and uses only 10 µL of a low toxicity organic solvent (1-hexadecanethiol) for the extraction solvent and no disperser solvent. The extraction time and centrifugation time require less than 10 min. The linear range was 1–500 ng mL^?1 for 4-tert-butylphenol, 2–1000 ng mL^?1 for 4-tert-octylphenol, and 5–500 ng mL^?1 for 4-n-nonylphenol with r² ≥ 0.9986. The detection limits were between 0.2 and 1.5 ng mL^?1. The recoveries of lake and river water samples were in the range of 79% to 108%, and the relative standard deviations were 5% to 10%.     

Applications of multidirectional reflective light-control films on reflective polymer-dispersed liquid crystal displays for enhancement in image quality at lower viewing angles

In this paper, multidirectional light-control reflective (LCR) films are developed in order to create an active reflective structure that will enhance the image brightness and contrast ratio of reflective dye-doped polymer-dispersed liquid crystal (D-PDLC) displays at lower viewing angles. Advantages of LCR films are that their production is low cost and they require a simple photolithographic fabrication method. The optimum design prism-type light-control reflective film succeeded in minimising the surface scattering effect; thus, the contrast ratio is much enhanced. The symmetric and asymmetric LCR films produced multidirectional scattering that enhances the reflectance at lower viewing angles, which has importance in future display applications. In particular, the prism LCR film has been found to be more influential on the reflectance of D-PDLC films due to multidirectional scattering of light by non-symmetric arrays. The improvement in contrast ratio has been confirmed by the enhancement of optical properties for reflective D-PDLC displays at lower viewing angles below 30°.     

Determination of zearalenone in maize products by vortex‐assisted ionic‐liquid‐based dispersive liquid–liquid microextraction with high‐performance liquid chromatography

A novel method has been developed for the analysis of zearalenone in maize products by vortex‐assisted ionic‐liquid‐based dispersive liquid–liquid microextraction combined with HPLC and fluorescence detection. Maize samples were extracted with methanol/water (80:20, v/v) and the extraction solution was then used as the dispersive solvent in the microextraction procedure. The analyte was rapidly transmitted to a small volume of ionic liquid and was determined by HPLC. Various parameters affecting the recovery of the mycotoxin were investigated, such as the type and volume of the extraction solvent, the type and volume of the dispersive solvent, the pH of the aqueous phase, the salt addition, and the time of vortex and centrifugation. Under the optimal experimental conditions, a good linearity of the analyte was obtained in the range of 1.0–1000.0 μg/L with the correlation coefficient of 0.9998. The limit of detection (S/N = 3) and quantification (S/N = 10) were 0.3 and 1.0 μg/kg, and the mean recoveries ranged from 83.5 to 94.9%, with a relative standard deviation less than 5.0%. The proposed method was demonstrated to be simple, cheap, quick, and highly selective and was successfully applied to the determination of zearalenone in maize products.