Extraction of various additives from polystyrene and their subsequent analysis

Summary The extraction of fifteen polymer additives which are used as antioxidants, uv stabilizers, process lubes, flame retardants, and antistats from eight formulations of polystyrene is demonstrated with supercritical carbon dioxide and compared to traditional dissolution/precipitation extractions. The purpose of the study was two fold: 1) the development of a high performance liquid chromatography method(s) for the additives and 2) the determination of the viability of supercritical fluids for extraction of the additives from polystyrene. Nine of the additives were assayed via reversed phase liquid chromatography while, the remaining six additives could not be assayed in this manner. In order to develop an extraction method for the additives, the effects of static extraction time, CO₂ density, and temperature were first investigated. These preliminary extractions revealed that a static period which afforded an opportunity for the polymer to swell combined with a high CO₂ density and temperature above the polymer glass transition yielded quantitative recoveries of the additives. Triplicate extractions of the various polystyrene formulations matched additive recoveries obtained by the traditional dissolution/precipitation method but the former method was faster and used less organic solvent.     

Effect of temperature,collection mode,and modifier on the supercritical CO2 extraction of dicofol residues from fish samples

Toxicity evaluation of Dicofol to Astyanax bimaculatus schubarti, a characteristic fish species living in tropical rivers and lakes was carried out through LC₅₀ – 96 Hours. These experiments were performed under laboratory controlled conditions with atmospheric air flow and dilution water at 25°C in the static mode, supercritical fluid extraction (SFE) with pure CO₂ and CO₂ modified with hexane and methanol were used at 50, 70, 80, and 100°C and 300 atm. Several collection modes were studied to extract Dicofol from fish samples. The extraction efficiencies were directly comparedd with those obtained after 8 h of Soxhlet extraction using the same clean-up with Florisil and analysis by HRGC/ECD and HRGC/MS as a confirmatory analytical technique. The SFE recoveries at temperatures lower than 80°C were typically lower than soxhlet recoveries; however a temperature increase enhanced the efficiency of SFE. The results showed that under certain conditions, supercritical fluid gave higher extractio power (extracted 11 % more pesticide), shorter extraction time, and lower solvent consumption than Soxhlet, thus affording an excellent alternative to the conventional method for extracting Dicofol from fish sample.     

Determination of Microcystins in Cyanobacteria by Supercritical Fluid Extraction and Liquid Chromatography‐Tandem Mass Spectrometry

Abstract

A method for the detection of microcystins (microcystin LR, RR, and YR) in cyanobacteria by supercritical fluid extraction (SFE) and liquid chromatography‐mass spectrometry (LC/MS) has been developed. Supercritical fluids for the analytical extraction of nonvolatile, higher molecular weight compound, and microcystins from cyanobacteria were investigated. The microcystins included in this study are sparsely soluble in neat supercritical fluid CO₂. However, the microcystins was successfully extracted with a ternary mixture (90% CO₂, 9.5% methanol, 0.5% water) at 40°C and 250 atm. The polar carbon dioxide‐aqueous methanol fluid system gave high extraction efficiency for the extraction of the polar microcystins from cyanobacteria. The microcystins were determined by liquid chromatography‐tandem mass spectrometry (LC/MS/MS).     

Towards high molecular weight poly(bisphenol a carbonate) with excellent thermal stability and mechanical properties by solid-state polymerization

Poly(bisphenol A carbonate) (BPA-PC) was post-polymerized by solid-state polymerization (SSP) after supercritical CO₂-induced crystallization in low molecular weight particles prepolymerized via melt transesterification reaction. The effects of the crystallization conditions on melting behavior and SSP of BPA-PC were investigated with differential scanning calorimetry (DSC), Ubbelohde viscosity method and gel permeation chromatography (GPC). The reaction kinetics of the SSP of crystallized prepolymers was studied as a function of reaction temperatures for various reaction periods. As a result, the viscosity average molecular weight of BPA-PC particles (2 mm) increased from 1.9 × 10⁴ g/mol to 2.8 × 10⁴ g/mol after SSP. More importantly, the significantly enhanced thermal stability and mechanical properties of solid-state polymerized BPA-PC, compared with those of melt transesterification polymerized BPA-PC with the same molecular weight, can be ascribed to the substantial avoidance of undergoing high temperature during polymerization. Our work provides a useful method to obtain practical product of BPA-PC with high quality and high molecular weight.     

Temperature effects on supercritical carbon dioxide extractions of hydrocarbons from geological samples

The extraction of aliphatic and aromatic hydrocarbons from New Albany Shale by supercritical carbon dioxide at different extraction temperatures is described. The main goal of this work was to determine the effect of the temperature on the extraction process (i.e. relative extraction rate and efficiency). The data suggest that temperature changes of 20 and 40 degrees for the relatively moderate extraction temperatures tested (55, 75, and 95°C), can have significant effects on both relative extraction rates and yields. While lower molecular weight aromatics presented exponential extraction profiles, similar to those of the aliphatic hydrocarbons, higher molecular weight aromatics, such as the phenanthrenes, showed a linear extraction profile. This behavior cannot be explained by solubility differences in the supercritical fluid alone, and are, therefore, most likely based on differences in the speciation of the hydrocarbons within the sample matrix. Extractions at elevated temperatures (300°C) resulted in significant increments in the relative recoveries of all compounds, but particularly for the aromatic hydrocarbons. This may be caused by structural rearrangement of the sample matrix with subsequent release of trapped hydrocarbons and possibly by C-S and S-S bond breakage.     

Effect of moisture on supercritical fluid extraction of polynuclear aromatic hydrocarbons and phenols from soil using an automated extractor

An automated supercritical fluid extraction system was evaluated with polynuclear aromatic hydrocarbons and phenols to demonstrate extraction efficiency, collection efficiency, and sample cross contamination. Results showed that 75/25 glass beads/octadecyl silica provided the highest collection efficiency for these classes of compounds. Also, the automated SFE system was used to study the effect of different percentages of water (w/w) in soil on extraction efficiency of fortified PAH and phenols at different temperatures and pressures. Results showed that the presence of (available) water in soil (>10%) does, increase extraction efficiency of higher molecular weight PAH at higher temperature. Also it was demonstrated that temperature rather than pressure had a marked effect on extraction efficiency. The extraction efficiency of phenols from soil which contained 5% of water, using pure supercritical CO₂, was higher than those obtained from dry soil or soil containing 1 % water. Extraction of phenols from soil did not show a dependence on pressure or temperature.     

Retention behavior of polycyclic aromatic hydrocarbons in supercritical fluid chromatography on a chemically bonded stationary phases based upon liquid-crystalline polymer

Summary The retention behavior of a set of polycyclic aromatic hydrocarbons in supercritical fluid chromatography have been studied on a chemically bonded stationary phase based upon a side chain liquid crystalline polymer (LCP) with carbon dioxide-based mobile phase. The effects of the mobile phase pressure, column temperature and amount of mobile phase organic modifier have been investigated in order to detect a possible structural change in the liquid crystal polymer linked to the silica support. The influence of these factors on the selectivity coefficients has also been studied. Two distinctive behaviors with temperature are noted at low pressure on the one hand and at higher pressure on the other. This change in behavior is based on the density of the supercritical CO₂ and the PAH volatility rather than on any specific stationary phase structural change. Both lower mobile phase pressure and amount of mobile phase modifier are required to obtain better selectivities. Better planarity recognition is observed in SFC than in HPLC with these new bonded liquid crystal stationary phases. The bonded liquid crystal phase is only weakly affected by the addition of organic modifier in the supercritical CO₂.     

Demonstration of a linear composition gradient during water saturation of CO2 in supercritical fluid chromatography

Summary Water was added to CO₂ by saturation to increase the solvation power of the mobile phase in supercritical fluid chromatography. The saturation was performed at a temperature above the boiling point of water (100°C) to increase the amount of water which could be loaded homogeneously into the CO₂ (2.5–3.0 mol% water as compared to about 0.25 mol% water at 25°C). A linear composition of water was produced by altering the density of the CO₂ during saturation. Modifications to the injector and CO₂ transfer lines prevented phase separation as a result of the instrumentation used in capillary supercritical fluid chromatography (SFC). After fitting vapor-liquid equilibria data to pressure, density, and temperature conditions, approximately 2.5–3.0 mol% of water was introduced in a linear gradient at 110°C. The effect of water on SFC performance was evaluated with standard steroid compounds. This paper provides further evidence for the need to examine vapor-liquid equilibria data prior to SFC.     

On-Line coupling of supercritical fluid extraction with high performance liquid chromatography

Supercritical fluid extraction was coupled directly with high performance liquid chromatograph. The system was evaluated for direct injection of supercritical CO₂ and modified supercritical CO₂ at high pressure and temperature onto a HPLC system with varying mobile phase compositions and flow rates. Injection of 9 μL supercritical CO₂ onto the HPLC using methanol/water mobile phases from 100% methanol to 80% with a flow of 1.0 mL/min did not adversely affect the baseline of UV detector. However at higher percentages of water, CO₂ solubility in the mobile phase decreased and caused baseline interferences on the UV detector. At higher HPLC mobile phase flow rates, supercritical CO₂ was injected to higher percentages of water without any effect on the UV baseline. Also, increasing the extraction pressure or modifier concentration did not change the results. Separations of polynuclear aromatic hydrocarbons and linear alkenebenzene sulfonate test mixtures were obtained using on-line SFE/HPLC interfaced system.     

Triticonazole enantiomers: Separation by supercritical fluid chromatography and the effect of the chromatographic conditions

Enantiomeric pairs of triticonazole have been successfully separated by supercritical fluid chromatography coupled with a tris(3,5‐dimethylphenylcarbamoyl) cellulose‐coated chiral stationary phase in this work. The effects of co‐solvent, dissolution solvent, flow rate, backpressure, and column temperature have been studied in detail with respect to retention, selectivity, and resolution of triticonazole. As indicated, the co‐solvents mostly affected the retention factors and resolution, due to the different molecular structure and polarity. In addition, the dissolution solvents, namely, chloromethanes and alcohols, have been also important for enantioseparation because of the different interaction with stationary phase. Higher flow rate and backpressure led to faster elution of the triticonazole molecules, and the change of column temperature showed slight effect on the resolution of triticonazole racemate. Moreover, a comparative separation experiment between supercritical fluid chromatography and high performance liquid chromatography revealed that chiral supercritical fluid chromatography gave the 3.5 times value of R_s/t_R2 than high performance liquid chromatography, which demonstrated that supercritical fluid chromatography had much higher separation efficiency.     

Supercritical fluid chromatography and some of its applications: A review

The general topic of supercritical fluid chromatography (SFC) is introduced, and historical aspects of its development are discussed. The physical properties of supercritical fluids, gases and liquids are tabulated. SFC is compared and contrasted with the classical forms of chromatography - gas chromatography (GC) and high performance liquid chromatography (HPLC). The selectivity of SFC, GC, and HPLC are discussed and compared. Instrumentation employed for supercritical fluid chromatography is depicted. A wide variety of SFC applications are introduced. New examples of the use of SFC for analysis of a variety of complex oligomeric mixtures indcluding polypropylene glycol, polysiloxanes, fluorocarbon oligomers (i.e. -3M's fluoro-chemical surfactant Fluorad 171, and Kel-F) and high molecular weight normal alcohols are shown. The use of SFC for separation of mono-, di-, and triglycerides at low operating temperatures is described. Lastly, the use of SFC for separations of complex hydrocarbon mixtures from liquid fuels, polycyclic aromatic hydrocarbons, synthetic alpha-olefins, and petroleum functional group separations are depicted.     

Determination of carbendazime in lettuce samples by SFE-HPLC

Summary An SFE-HPLC method for the determination of carbendazime in lettuce leaves is described. The method involves a prior lyophilization of the sample and subsequent extraction with supercritical carbon dioxide containing methanol. The extraction conditions are as follows: amount of lyophilized sample, 1 g; CO₂ density, 0.75 g/ml; temperature, 50 °C; flow-rate, 1.8 ml/min; dynamic extraction time, 25 min. Carbendazime is determined with an octadecylsilane column, an acetonitrile/water 3070 mobile phase and fluorescence detection at 285/317 nm. Carbendazime recoveries from spiked samples were all close to 100%. A comparison with the results from a conventional method for the determination of carbendazime reveals the new method to be more rapid, simple and reproducible for samples with low concentrations of analyte.     

SFE of rosemary oil: Assessment of the influence of process variables and extract characterization

The effects of temperature and solvent density on the characteristics of the extracts obtained from supercritical fluid extraction (SFE) of the volatile compounds from Brazilian rosemary (Rosamarinus officianalis L., Labiatae) using carbon dioxide (CO₂) as solvent were investigated. The experiments were performed in a semi-batch laboratory scale home-made unit at two temperatures, viz. 310.15 and 320.15 K, over the pressure range of 100-160 bar. This study allowed to determine the crossover point and the maximum solubility of the oil. The products were analyzed by HRGC-MS, and compounds grouped in three different classes according to their molecular mass distribution in order to evaluate the influence of the variables studied on the characteristics of the extracts. The model proposed by Sovová was adopted in an attempt to interpret the mass transfer phenomena in the extraction process.     

Supercritical fluid extraction of polybrominated diphenyl ethers (PBDEs) from house dust with supercritical 1,1,1,2-tetrafluoroethane (R134a)

The extraction of polybrominated diphenyl ethers (PBDEs) from SRM 2585 (Organic Contaminants in House Dust) was investigated using supercritical fluid R134a as an extraction solvent. Three methods of dust extraction were studied: (1) extraction of dry dust, (2) extraction of dry dust dispersed on Ottawa sand and (3) extraction of dust wet with dichloromethane. For each of the three sample preparation methods, extracts at three temperatures (110, 150, and 200 °C) above the critical temperature of R134a were performed. Eight PBDE congeners (BDE-28, -47, -99, 100, -153, -154, -183, and -209) in the SFE extracts were analyzed by liquid chromatography negative-ion atmospheric pressure photoionization tandem mass spectrometry (LC/NI-APPI/MS/MS). The optimum extraction of PBDEs from house dust using supercritical R134a is obtained when the dust is pre-wet with dichloromethane prior to extraction to swell the dust. For all sample preparation methods, higher temperatures afforded higher percent recoveries of the eight PBDE congeners. Only a combination of high-temperature (200 °C) and pre-wetting the dust with dichloromethane produced high recovery of the environmentally important, fully brominated PBDE congener, BDE-209.     

Round‐robin experiment in high‐temperature gel permeation chromatography

The results of an interlaboratory or round‐robin experiment in high‐temperature gel permeation chromatography (HT‐GPC) analysis are presented. The intention was to determine and raise awareness of interlaboratory reproducibility of HT‐GPC techniques. Fifteen laboratories performed analyses of five polyethylene samples and standards SRM 1475 and 1476. Reproducibility, as measured by the interlaboratory standard deviation (s_LAB), was greatly influenced by the breadth of the molecular weight distribution (MWD) and branching. The s_LAB values for the weight‐average molecular weight (M_w) of linear polyethylenes of narrow and broad MWDs were 4 and 14%, respectively. For branched polymers, GPC viscometry methods are shown to measure significantly higher molecular weights than the noncoupled GPC method, with higher variance. For branched polyethylenes measured with GPC viscometry, the reproducibility of M_w was characterized by s_LAB = 18%. Reproducibility of the SRM 1475 standard was better than for unknowns. The results for branched standard SRM 1476 emphasize the important role of the detection method in GPC but call into question the use of this material as a molecular weight standard. For single‐site polyethylene, only a handful of labs measured an MWD that closely matched the Flory distribution. Qualitatively, the responses indicate that many variations in instrument and analytical methods exist among laboratories; this is partly a reflection of the development and refinements that this technique must yet undergo before a truly standard method is widely accepted and practiced. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 905–921, 2002     

Supercritical fluid extraction of carbamate pesticides from soils and cereals

Summary A method for the supercritical fluid extraction of carbamate pesticides (propoxur, aminocarb, carbaryl and methiocarb) from soil and cereal samples using CO₂ is proposed. Extractions were at 378 bar and 54 °C. Analytes were determined in the extracts by HPLC with fluorescence detection after post-column derivatization. Recoveries from spiked soil ranged between 39.6 and 91.7%, depending on analyte and soil components. Lowest recoveries were from sandy soils. Aminocarb could not be recovered from any soil using CO₂. Recovery of aminocarb from diatomaceous earth was improved by adding methanol to the extraction cell prior to SFE, but the effect was not observed in soil samples. Recoveries for propoxur and aminocarb from spiked wheat were about 75%, and only between 30–50% for aminocarb from corn and oats, and carbaryl from wheat. Fat was coextracted using CO₂ and retained in the trap together with the analytes, however, appropriate rinsing solvent allowed on-line clean-up of the extract.     

Analysis of organic pollutants in sewage by supercritical fluid extraction

Summary Analytical methods have been developed for the determination of organic pollutants of intermediate polarity in sewage. Water samples are first passed through a solid phase adsorption cartridge. The analytes are then extracted from the absorbent with supercritical CO₂ into a small volume of trapping solvent. Finally, the extracts are analyzed directly by capillary gas chromatography and gas chromatography-mass spectrometer. The various parameters (pressure, temperature, type and concentration of modifiers, trapping solvent, flow rate and volume of supercritical fluid and equilibrium time) influencing the efficiency of extraction were studied. Extraction efficiencies for the test compounds are >70%, and relative standard deviations are <4.6% (n=3). The methods established were applied to the analysis of sewage at the Lanzhou Wastewater Treatment Plant, China. 66 organic pollutants were detected, of which 15 compounds appeared in the list of priority pollutants suggested by the US EPA.     

Use of various filters for generating modified supercritical fluid mobile phases

Summary Adding various components to supercritical carbon dioxide in supercritical fluid chromatography can extend or significantly alter the solvating properties. Polar samples which are difficult to analyze with pure supercritical CO₂ because of their high polarity can be separated by addidng polar modifiers. In this paper, a new mixing method using an HPLC filter for adding polar modifier to CO₂ is described. Although several filters were tried, only one could keep the amount of modifier in the mobile phase constant for a long time. The amount of water or methanol dissolved in supercritical CO₂ was measured by an amperometric microsensor made of a thin film of perfluorosulfonate ionomer (PFSI).     

Off-line SFE-CGC-ECD analysis of 2,4-D and Dicamba residues in real sugar cane,rice and corn samples

Determination of 2,4-D (2,4-dichlorophenoxyacetic acid) and Dicamba (2-methoxy-3,6-dichlorobenzoic acid) residues in sugar cane, rice, and corn was carried out both by solid liquid extraction (SLE), as already described in the literature, and by a supercritical fluid extraction (SFE) method developed in our laboratory. The extracts were esterified and cleaned-up by passing through a Florisil column. Extracts were analyzed by high resolution gas chromatography, with electron capture detection. The tested methods presented good recoveries (above 90%); the SFE CO₂/acetone method showed better extraction efficiencies (extracted 30 % more herbicide in real samples), shorter extraction time and lower organic solvent consumption than the SLE method.     

Evaluation of an ion mobility detector for supercritical fluid chromatography with solvent-modified carbon dioxide mobile phases

Summary An ion mobility detector (IMD) was evaluated for open tubular column supercritical fluid chromatography (SFC) when organic solvent-modified supercritical CO₂ was used as mobile phase. It was found that the SFC/IMD interface design in which the SFC capillaray restrictor was directly inserted into the ionization region of the IMD was not acceptable because of low sensitivity that resulted from the effect of the modifier on detector temperature and mechanism of detection. A new interface utilizing a heated nebulizer gas to provide heat to the restrictor and to minimize the formation of ion clusters, and a bent nozzle for enhancing the ionization efficiency of the solute in the IMD ion source are described. Using 5% acetonitrile in CO₂, the minimum detectable quantity (S/N=3) for pyrene was improved from 25.2 ng to 2.1 ng with the new detector design. This compares to a minimum detectable quantity of 0.1 ng when using neat CO₂ as mobile phase. The use of molecular connectivity calculations to predict the drift times of selected analytes is also successfully demonstrated.