数字剪切散斑干涉术中的刚体位移补偿的新方法

给出一个数字剪切散斑干涉术中的刚体位移补偿的新方法，当刚体位移大于一个像素时，加载前后的散斑图将会由于位置的变化导致失相关，重新安排每一个像素将会克服此失相关，散斑平均、条纹重构以及迭代方法用来改善条纹质量，消除散斑噪声，最后得到可取结果。     

基于数字散斑照相术测量刚体面内位移

数字散斑照相术通常测量刚体的面内位移。从基本原理着手,研究了基于散斑照相术的两种常用方法,即数字图像相关法和傅里叶变换法。论述了数字图像相关法中的亚像素梯度算法,讨论了如何选择子区的大小,优化测量结果;傅里叶变换法通过对散斑图进行傅里叶变换和数学形态学等一系列操作,获得精确的条纹间距,从而更好地计算面内位移。实验结果表明,傅里叶变换法的测量精度要高于数字图像相关法。     

测量物体位移的数字白光散斑照相术

给出了一测量物体刚体位移的数字白光散斑照相术。数字傅里叶变换从双曝光字白光散斑图用来产生杨氏条纹。该杨氏条纹能够用数字傅里叶变换结合条纹重构进行自动分析。此外，给出一种条纹质量增强的方法。     

基于条纹中心线的载波散斑条纹解调方法

针对传统傅里叶变换法在处理含有多突起的载波散斑条纹图时,由于存在频谱展宽会出现严重的解调相位失真,提出了一种基于条纹中心线的载波散斑条纹解调方法.根据载波调制时所采用平行调制方式和倾斜调制方式,分别从理论上对相关的中心线解调法进行数学推导,并进一步采用最小二乘三次曲面拟合法获得被测物面全场的离面位移信息.实验结果表明:利用上述中心线解调法和曲面拟合法能解调出复杂的载波条纹图,并获得具有亚像素定位准确度、连续光滑的全场离面位移信息.     

两种插值亚像素定位法在数字散斑测量中的应用

利用数字散斑相关测量法只能得到试件的整像素位移量,不能满足高精度的测量要求。探讨了两种插值法在数字散斑亚像素级测量中的应用,并对相关系数多项式插值法和对数插值法的测量结果进行了比较,为在不同亚像素级位移条件下选择较为恰当的测量方法提供了依据。     

部分相干光处理系统在散斑干涉术全场分析中的应用

本文提出将散斑干涉术的全场分析放在部分相干光处理系统中进行。其优点是能减小散斑的大小和反衬以提高全场条纹的质量;能辨认零级条纹为全场分析带来方便。另外,用不同颜色的滤波小孔,可以同时得到两组以上沿不同方向颜色编码的全场条纹。 本文讨论了在部分相干光处理系统中刚体面内转动散斑照相的全场分析。最后给出了零级条纹判读等一系列实验结果。     

电子散斑干涉条纹骨架线提取的新方法

电子散斑干涉条纹的强噪声特性使其信噪比过低，常用的图像二值化、细化等算法对散斑干涉条纹的骨架提取都存在一定的不足，文章在对散斑条纹图像平滑去噪、对比度增强的预处理基础上，对其进行边缘提取、填充、细化，从而得到干涉条纹的中心骨架线，提出一种基于MATLAB的散班图像自动处理算法。结果表明：文中提出的干涉条纹的细化方法可以准确地找到骨架线，为获得面内位移场的等位移线图提供了一种新方法。     

基于图像分形相关位移测量新方法的研究

本文从分形理论出发提出了图像分形相关位移测量的新方法。较之20世纪80年代发展起来的以像素的灰度相关为基础的数字散斑相关法，分形相关法更充分地利用了散斑图的相关性特征，有关更深入的发展潜力。为了验证理论与方法的可靠性，进行了验证性实验并和数字散斑相关法的测试结果进行了比较。测试结果显示，测试精度至少可达0.06个像素。最后讨论了这一方法的发展前景。     

基于GMA光流网络的二维变形测量数字图像相关法初值估计

提出一种利用深度学习提取散斑变形图像位移场的算法。对比几种主流光流网络模型在散斑图像上的计算精度,将全局运动聚合（GMA）光流网络引入数字图像相关法,使用光流网络模型预测的位移场作为亚像素迭代算法的初值,最后结合逆合成高斯-牛顿法计算散斑图像的亚像素位移场。结果表明,与几种主流的数字图像相关算法相比,GMA光流网络初值的计算精度和计算效率更高,适用于大变形测量,是一种兼顾计算速度和精度的变形测量算法。对木块材料进行压缩实验,结果充分显示了所提方法在散斑变形测量中的有效性。     

剪切散斑干涉术的统计分析

本文用统计光学方法分析了剪切散斑图的成象过程;散斑图的频谱分布以及全场滤波干涉条纹的形成.发现剪切散斑干涉条纹不仅与三维位移微分有关,而且与面内位移量有关.在此基础上又讨论了影响干涉条纹质量的有关因素,并作了实验验证.     

三温区溶质传输助熔剂法生长BaTiO_3晶体

ＢａＴｉＯ３晶体新的生长方法，即感应加热三温区溶质传输熔剂法。其要点使高温熔体分为三个温区，坩埚顶部为生长区（Ａ区），温度最低，坩埚底部为溶解区（Ｃ区），温度高于生长区，营养料置于此区，坩埚中部为高温区（Ｂ区），在此区将杂晶熔解。还阐述了此法的机理，调试创造了稳定适宜的三温区温场。用此法生长出了优质ＳＴｉＯ３大单晶，尺寸达３０×３０×１５ｍｍ，并初步观测了其畴结构形貌，实验测定了晶格常数和居里点。     

A novel method to obtain electronic speckle pattern interferometry fringe patterns with high contrast

Traditional speckle fringe patterns of electronic speckle pattern interferometry （ESPI） are obtained by adding, subtracting, or multiplying the speckle patterns recorded before and after the deformation. However, these speckle fringe patterns are of limited visibility, especially for addition and multiplication fringe patterns. We propose a novel method to obtain speckle fringe patterns of ESPI from undeformed and deformed speckle patterns. The fringe pattern generated by our method is of high contrast and has better quality than subtraction fringe. The new method is simple and does not require more computational effort. The proposed method is tested on the experimentally obtained undeformed and deformed speckle patterns. The experimental results illustrate the performance of this approach.     

Technique for compensating excessive rigid body motion in nondestructive testing of large structures using shearography

A major limitation of speckle interferometry techniques including shearography is that the occurrence of rigid body motion produces a decorrelation of speckle patterns which destroys the fringe visibility. This paper demonstrates that digital shearography can tolerate much greater rigid body translation than a speckle size as predicted by the conventional speckle decorrelation theory. Excessive rigid body translation in digital shearography can be compensated by either translating the sensor/camera or digitally shifting one of the speckle patterns.     

Holography, speckle, and computers

Surveys are presented on automatic and quantitative deformation measurements using CCDs and computers in holographic interferometry and speckle metrology for diffusely reflecting surfaces. For delivering relationships between object deformation and observed quantities, we discuss formations of fringes and signals observed in these methods in terms of correlation functions of spatially randomly varying complex amplitude of light. Dependencies of the observed patterns on object deformation and optical systems are discussed. Physical meanings of the derived relationships are explained in terms of the dynamic behaviors of speckles resulting from surface deformation. Automatic measurements are described in chronological orders. They include analysis of fringe patterns resulting from photographic recording of specklegrams, video recording and analysis of speckle patterns used in electronic speckle pattern interferometry as well as direct digital correlation techniques, and digital holography that uses both digital recording and reconstruction of holograms.     

基于条纹等值线相关的散斑条纹图处理新方法

在数字散斑干涉术中,通常由物体变形前后得到的两幅原始散斑场用相减方法来得到条纹图,并由相移后的多幅(三幅以上)条纹图来求取相位场。介绍了一种基于条纹等值线相关的条纹图生成新方法,并在此基础上提出了基于单幅干涉条纹图的相位场提取新方法和基于条纹等值线相关的单步相移新方法。实验结果表明,该方法具有良好的结果和发展前景。     

Contrast of time-averaged image speckle pattern for a vibrating object

In vibration analysis by speckle photography it is qualitatively known that the contrast of speckle patterns averaged in the exposure time varies, depending on the object motion. In this paper, the contrast of time-averaged image speckle patterns is theoretically evaluated and found to be determined by the ratio of the sinusoidally oscillating amplitude of the object motion to the average size of static speckles. An effect of the film response on the contrast of time-averaged speckle patterns is also studied.     

运动界面上反射超声散斑空间运动的研究

在Kirchhoff 衍射理论的基础上，应用随机信号相关原理，推导了作刚体运动的界面上反射超声散斑在空间运动时，保持其复振幅相关的必要条件.由此得到超声散斑的空间运动公式.界面、超声散斑和超声接收探头之间的相对运动，导致界面孔径的改变.分析表明，在保持界面孔径相关的条件下，界面所允许的最大平移量和转角值，与声源位置、接收用聚焦探头的数值孔径、超声入射角以及观察角有关.应用数字相关技术和三维扫描信号采集系统，根据散斑场子集相关系数的单峰性质，对超声散斑空间运动公式进行了实验验证.实验结果表明，理论分析所得的 关键词： 超声散斑 相关原理 空间运动     

散斑干涉相位条纹图的频域滤波处理

为了解决在数字散斑干涉技术测量时,散斑干涉相位条纹图像中大量噪声对相位解包裹结果和精度产生严重影响的问题,介绍了一种条纹正余弦分解和频域低通滤波结合的方法,实现了散斑干涉相位条纹图的高精度滤波。该方法的基本思路是在对相位图像进行滤波处理前,先将相位图通过正余弦函数进行映射转换成两幅图,分别经过频域滤波,然后再合成为相位图。这种分解频域滤波方法可以在滤波的同时,有效保留相位跳变信息。实验结果表明：与传统的图像降噪方法相比,该方法能够在保留图像“尖峰”信息的基础上,较好地滤除图像中的散斑噪声,方法简单有效,有效解决了传统滤波方法应用在相位条纹图中,相图灰度信息丢失10%~40%的问题。     

Use of a joint transform correlator architecture for study of speckle displacements

The optical speckle–displacement correlation technique (OSDCT) is proposed for study of in-plane speckle displacements. The joint transform correlator architecture is used to evaluate the displacements of speckle subimages of strained surfaces. The procedure of the correlation response producing as a result of cross-correlation of strainless and strained surfaces in a conventional joint transform correlator (JTC) is considered. The convenient techniques for a joint power spectrum transformation are selected. The systematic and random errors of a mean speckle pattern displacement of a rigid body motion calculated by using the OSDCT and the digital speckle–displacement measurement technique are compared. The robustness of some JTC versions (a conventional JTC, a JTC with median thresholding, a JTC with subset median thresholding, and a fringe adjusted filter JTC) to input noise of speckle patterns and output noise of a correlation response is studied.