An investigation of Staudinger reactions involving cis-1,3,5-triazidocyclohexane and tri(alkylamino)phosphines

The reaction of 1,3,5-cis-triazidocyclohexane with the electron-rich tris(dialkylamino)phosphines P(NMe(2))(3) (1) and N(CH(2)CH(2)NMe)(3)P (2b) in acetonitrile for 3 h furnished the corresponding tris-phosphazides 1,3,5-cis-(R(3)PN(3))(3)C(6)H(9), 3a (R(3)P = 1) and 3b (R(3)P = 2b), in 90% and 92% yields, respectively. The same reaction with the relatively electron-poor tris(dialkylamino)phosphine MeC(CH(2)NMe)(3)P (4) for 2 days gave the tris-iminophosphorane, 1,3,5-cis-(R(3)PN)(3)C(6)H(9), 5a (R(3)P = 4), in 60% yield. Compound 3b is a thermally stable solid that did not lose dinitrogen when refluxed in toluene for 24 h or when heated as a neat sample at 100 degrees C /0.5 Torr for 10 h. By contrast, tris-phosphazide 3a decomposed to the tris-iminophosphorane 1,3,5-cis-(R(3)PN)(3)C(6)H(9), 5b (R(3)P = 1), in 3 h in quantitative yield upon heating to 100 degrees C in toluene. Factors influencing the formation of the phosphazides or the iminophosphoranes in these reactions are discussed. The reaction of 3b with 4 equiv of benzoic acid gave [N(CH(2)CH(2)NMe)(3)P=NH(2)]PhCO(2) ([6bH]PhCO(2)) in quantitative yield along with benzene (56% yield) and dinitrogen. The same reaction with 3a gave [(Me(2)N)(3)P=NH(2)]PhCO(2) ([7aH]PhCO(2)) (quantitative yield), benzene (15% yield), and dinitrogen(.) Treatment of [6bH]PhCO(2) with KO(t)Bu afforded N(CH(2)CH(2)NMe)(3)P=NH (6b) in 40% overall yield. Compound 6b upon treatment with PhCH(2)CH(2)Br produced [6bH]Br in 90% yield along with styrene. The new compounds were characterized by analytical and spectroscopic methods, and selected compounds (3b, 5a, and [6bH]Br) were structured by X-ray crystallography. A special feature of 3b is its capability to function as a starting material for 6b, which was not accessible by other synthetic routes.     

Novel cation [N(SO2NMe3)2]+ and its synthesis and crystal structure. Dichloride of imido-bis(sulfuric) acid HN(SO2Cl)2. Part 1. Crystal structures of KN(SO2Cl)2.(1/2)CH3CN, KN(SO2Cl)2.(1/6)CH2Cl2, and [PCl4][N(SO2Cl)2

Several salts of bis(chlorosulfonyl)imide HN(SO2Cl)2 (1), namely, two solvates of its potassium salt, KN(SO2Cl)2.(1/2)CH3CN (1K1), KN(SO2Cl)2.(1/6)CH2Cl2 (1K2), and its tetrachlorophosphonium salt, [PCl4][N(SO2Cl)2] (2), were prepared and structurally characterized. The reaction of HN(SO2Cl)2 with Me3N gives the [N(SO2Cl)2]- salt of a novel cation, [N(SO2NMe3)2]+. This cation is analogous to the [HC(SO2NMe3)2]+ cation, but in contrast to the latter, it is fairly stable to hydrolysis. The salt [N(SO2NMe3)2]+[N(SO2Cl)2]- (3) can be converted into salts of other anions by being treated with diluted aqueous solutions of the respective acids, and thus NO3-, Cl-.H2O, SeO3(2-), CH3COO-, HSO4-, (COO)2(2-) salts were prepared. Treatment of 3 with concentrated HNO3 gave the [N(SO2NMe3)2]+ [O2NO-H-ONO2]- salt, and the addition of an HCl-acidified FeCl3 aqueous solution yielded the FeCl4- salt. Methanolysis resulted in the formation of MeOSO3- and [MeOSO2NSO2OMe]- salts. All salts have been characterized by chemical analysis, vibrational spectroscopy, and X-ray structure determinations.     

Reactivity of the inversely polarized phosphaalkenes RP=C(NMe2)2 (R = tBu, Me3Si, H) towards arylcarbene complexes [(CO)5M=C(oEt)Ar] (Ar= Ph, M = Cr, W; Ar = 2-MeC6H4, 2-MeOC6H4, M = W)

The reaction of the arylated Fischer carbene complexes [(CO)5M=C(OEt)Ar] (Ar=Ph; M = Cr, W; 2-MeC6H4; 2-MeOC6H; M = W) with the phosphaalkenes RP=C(NMe2), (R=tBu, SiMe3) afforded the novel phosphaalkene complexes [[RP=C(OEt)Ar]M(CO)5] in addition to the compounds [(RP=C(NMe2)2]M(CO)5]. Only in the case of the R = SiMe3 (E/Z) mixtures of the metathesis products were obtained. The bis(dimethylamino)methylene unit of the phosphaalkene precursor was incorporated in olefins of the type (Me2N)2C=C(OEt)(Ar). Treatment of [(CO)5W=C(OEt)(2-MeOC6H4)] with HP=C(NMe2)2 gave rise to the formation of an E/Z mixture of [[(Me2N)2CH-P=C(OEt)(2-MeOC6H4)]W(CO)5] the organophosphorus ligand of which formally results from a combination of the carbene ligand and the phosphanediyl [P-CH(NMe2)2]. The reactions reported here strongly depend on an inverse distribution of alpha-electron density in the phosphaalkene precursors (Pdelta Cdelta+), which renders these molecules powerfu] nucleophiles.     

Comparisons of phosphorus ligation properties in P(CH2NR)3P

Bicyclic P(CH2NMe)3P was synthesized, and its reactions with MnO2, elemental sulfur, p-toluenesulfonyl azide, BH3.THF, and W(CO)5(THF) were shown to furnish a variety of products in which the PC3 and/or the PN3 phosphorus are oxidized/coordinated. In contrast, reactions of the previously known P(CH2NPh)3P with Mo(0) and Ru(II) precursors were shown to afford products in which only the PC3 phosphorus is coordinated. The contrast in reactivity of P(CH2NR)3P (R = Me, Ph) with the aforementioned reagents is discussed in terms of steric and electronic factors. The new compounds are characterized by analytical and spectroscopic (IR, 1H, 31P, and 13C NMR) methods. The results of crystal and molecular structure X-ray analyses of the previously known compounds P(CH2O)3P and P(CH2NPh)3P and 6 of the 14 new compounds obtained in this investigation are presented. Salient features of these structures and the analysis of the Tolman cone angles calculated from their structural parameters are discussed in terms of the effects of constraint in the bicyclic moieties. Evidence is presented for greater M-P sigma bonding effects on coordination of the PC3 phosphorus of P(CH2NR)3P (R = Me, Ph) than are present in PMe3 analogues of group 6B metal carbonyls. From 1JBP data on the BH3 adducts of P(CH2NMe)3P, it is suggested that the free bases MeC(CH2NMe)3P < P(CH2NMe)3P < (Me2N)3P < P(MeNCH2CH2)3N increase in Lewis basicity at the PN3 phosphorus in the order shown. Substantial differences in 31P chemical shifts in the bicyclic compounds discussed herein relative to their acyclic analogues do not seem to be associated with the relatively small bond angle changes that occur around either the PN3 or the PC3 trivalent phosphorus atoms.     

Synthesis and structural characterization of Sm(II) and Yb(II) complexes containing sterically demanding, chelating secondary phosphide ligands

Metathesis between [(Me3Si)2CH)(C6H4-2-OMe)P]K and SmI2(THF)2 in THF yields [([Me3Si]2CH)(C6H4-2-OMe)P)2Sm(DME)(THF)] (1), after recrystallization. A similar reaction between [(Me3Si)2CH)(C6H3-2-OMe-3-Me)P]K and SmI2(THF)2 yields [([Me3Si]2CH)(C6H3-2-OMe-3-Me)P)2Sm(DME)].Et2O (2), while reaction between [(Me3Si)2CH)(C6H4-2-CH2NMe2)P]K and either SmI2(THF)2 or YbI2 yields the five-coordinate complex [([Me3Si]2CH)(C6H4-2-CH2NMe2)P)2Sm(THF)] (3) or the solvent-free complex [([Me3Si]2CH)(C6H4-2-CH2NMe2)P)2Yb] (4), respectively. X-ray crystallography shows that complex 2 adopts a distorted cis octahedral geometry, while complex 1 adopts a distorted pentagonal bipyramidal geometry (1, triclinic, P1, a = 11.0625(9) A, b = 15.924(6) A, c = 17.2104(14) A, alpha = 72.327(2) degrees, beta = 83.934(2) degrees, gamma = 79.556(2) degrees, Z = 2; 2, monoclinic, P2(1), a = 13.176(4) A, b = 13.080(4) A, c = 14.546(4) A, beta = 95.363(6) degrees, Z = 2). Complex 3 crystallizes as monomers with a square pyramidal geometry at Sm and exhibits short contacts between Sm and the ipso-carbon atoms of the ligands (3, monoclinic, C2/c, a = 14.9880(17) A, b = 13.0528(15) A, c = 24.330(3) A, beta = 104.507(2) degrees, Z = 4). Whereas preliminary X-ray crystallographic data for 4 indicate a monomeric structure in the solid state, variable-temperature 1H, 13C(1H), 31P(1H), and 171Yb NMR spectroscopies suggest that 4 undergoes an unusual dynamic process in solution, which is ascribed to a monomer-dimer equilibrium in which exchange of the bridging and terminal phosphide groups may be frozen out at low temperature.     

Synthesis, spectroscopic, and structural studies on transition metal complexes involving homoleptic tripodal selenoether and telluroether coordination

The reaction of [MCl2(NCMe)2] (M = Pd or Pt) with 2 molar equiv of MeC(CH2ER)3 (E = Se, R = Me; E = Te, R = Me or Ph) and 2 molar equiv of TlPF6 affords the bis ligand complexes [M(MeC(CH2ER)3)2][PF6]2. The crystal structure of [Pt(MeC(CH2SeMe)3)2][PF6]2 (C16H36F12P2PtSe6, a = 12.272(10) A, b = 18.563(9) A, c = 15.285(7) A, beta = 113.18(3) degrees, monoclinic, P2(1)/n, Z = 4) confirms distorted square planar Se4 coordination at Pt(II), derived from two bidentate tripod selenoethers with the remaining arm not coordinated and directed away from the metal center. Solution NMR studies indicate that these species are fluxional and that the telluroether complexes are rather unstable in solution. The octahedral bis tripod complexes [Ru(MeC(CH2SMe)3)2][CF3-SO3]2 and [Ru(MeC(CH2TePh)3)2][CF3SO3]2 are obtained from [Ru(dmf)6][CF3SO3]3 and tripod ligand in EtOH solution. The thioether complex (C18H36F6O6RuS8, a = 8.658(3) A, b = 11.533(3) A, c = 8.659(2) A, alpha = 108.33(2) degrees, beta = 91.53(3) degrees, gamma = 106.01(2) degrees, triclinic, P1, Z = 1) is isostructural with its selenoether analogue, involving two facially coordinated trithioether ligands in the syn configuration. NMR spectroscopy confirms that this configuration is retained in solution for all of the bis tripod Ru(II) complexes. These low-spin d6 complexes show unusually high ligand field splittings. The hexaselenoether Rh(III) complex [Rh(MeC(CH2SeMe)3)2][PF6]3 was obtained by treatment of [Rh(H2O)6]3+ with 2 molar equiv of MeC(CH2SeMe)3 in aqueous MeOH in the presence of excess PF6- anion, while the iridium(III) analogue [Ir(MeC(CH2SeMe)3)2][PF6]3 was obtained via the reaction of the Ir(I) precursor [IrCl(C8H14)2]2 with the selenoether tripod in MeOH/aqueous HBF4. NMR studies reveal different invertomers in solution for both the Rh and Ir species. The Cu(I) complexes [Cu(MeC(CH2ER)3)2]PF6 were obtained from [Cu(NCMe)4]PF6 and tripod ligand in CH2Cl2 solution. The corresponding Ag(I) species [Ag(MeC(CH2TeR)3)2]CF3SO3 (R = Me or Ph) were obtained from Ag[CF3SO3] and tripod telluroether. In contrast, a similar reaction with 2 molar equiv of MeC(CH2SeMe)3 afforded only the 1:1 complex [Ag(MeC(CH2SeMe)3)]CF3SO3. The structure of this species (C9H18AgF3O3SSe3, a = 8.120(3) A, b = 15.374(3) A, c = 14.071(2) A, beta = 93.86(2) degrees, monoclinic, P2(1)/n, Z = 4) reveals a distorted trigonal planar geometry at Ag(I) derived from one bidentate selenoether and one monodentate selenoether. These units are then linked to adjacent Ag(I) ions to give a one-dimensional linear chain cation.     

1,3-Migration of Trimethylsilyl Group from Carbon to Oxygen in Highly Sterically Hindered Silanol of the Type (Me 3 Si) 3 CSi(C 6 H 4 Me- p )MeOH and Reaction of the Related Iodide with Iodine Monochloride and Iodine Monobromide

The silanol (Me 3 Si) 3 CSi(C 6 H 4 Me- p )MeOH has been shown to isomerize to (Me 3 Si) 2 CHSi(C 6 H 4 Me- p )(Me)(OSiMe 3 ) when it was kept at room temperature for 10 h in 0.2 M NaOMe/MeOH. Corresponding isomerizations of the above silanol (to give (Me 3 Si) 2 CHSi(C 6 H 4 Me- p ) (Me)(OSiMe 3 )) are complete after 26 h under reflux in pyridine. The reaction involve 1,3-migration from carbon to oxygen within a silanolate ion to give a carbanion, which rapidly acquires a proton from the solvent. Treatment of (Me 3 Si) 3 CSi(C 6 H 4 Me- p )MeOH with MeLi in Et 2 O/THF give, by the same rearrangement, the organolithium reagent (Me 3 Si) 2 CLiSi(C 6 H 4 Me- p )(Me)(OSiMe 3 ) which on treatment with Me 2 SiHCl gives (Me 3 Si) 2 C(SiMe 2 H)Si(C 6 H 4 Me- p )(Me)(OSiMe 3 ) and (Me 3 Si) 2 CHSi(C 6 H 4 Me- p )(Me)(OSiMe 3 ). When the experiment was repeated, but with Me 3 SiCl in place of Me 2 SiHCl, it gives exclusively (Me 3 Si) 2 CHSi(C 6 H 4 Me- p )(Me)(OSiMe 3 ). Treatment of the organolithium reagent (Me 3 Si) 2 CLiSi(C 6 H 4 Me- p )(Me)(OSiMe 3 ) with Mel gives exclusively (Me 3 Si) 2 CMeSi(C 6 H 4 Me- p )(Me)(OSiMe 3 ). The related iodide (Me 3 Si) 3 CSi(C 6 H 4 Me- p )Mel reacts with ICI and IBr to give rearranged (Me 3 Si) 2 C(SiMe 2 X)Si(C 6 H 4 Me- p )Me 2 and unrearranged products (Me 3 Si) 3 CSi(C 6 H 4 Me- p )MeX, (X = Cl, Br) respectively. The rearranged bromide (Me 3 Si) 2 C(SiMe 2 Br)Si(C 6 H 4 Me- p )Me 2 reacts with a range of silver [I] salts AgY (Y = OOCCH 3 , SO 4 2 m ) and Mercury [II] salt HgY 2 (Y = OOCCH 3 , SO 4 2 m ) in glacial CH 3 COOH to give the corresponding species (Me 3 Si) 2 C(SiMe 2 OOCCH 3 )Si(C 6 H 4 Me- p )Me 2 . The reaction of the bromide with AgBF 4 in MeOH or i -PrOH give the corresponding rearranged products (Me 3 Si) 2 C(SiMe 2 Y)Si(C 6 H 4 Me- p )Me 2 (Y = --OMe, --OPr i ).     

Reactivity of Phosphaalkenes toward Carbene Complexes

Reaction of phosphaalkenes RP=C(NMe 2 ) 2 (R = t -Bu, Me 3 Si), featuring an inverse distribution of electron density about the P--C double bond, with Fischer carbene complexes [(CO) 5 M=C(OEt)Ar] (Ar=Ph, 2-MeC 6 H 4 , 2-MeOC 6 H 4 , M = Cr, W) afforded a mixture of complexes [(CO) 5 M{P(R)=C(NMe 2 ) 2 }] and [(CO) 5 M{P(R)=C(OEt)Ar}]. The treatment of phosphaalkene HP=C(NMe 2 ) 2 with compound [(CO) 5 W=C(OEt)(2-MeOC 6 H 4 )] gives rise to the formation of an ( E / Z )-mixture of [(CO) 5 W{P(CH(NMe 2 ) 2 )=C(OEt)(2-MeOC 6 H 4 )}].     

Synthesis and structures of selected triazapentadienate of Li, Mn, Fe, Co, Ni, Cu(I), and Cu(II) using 2,4-N,N'-disubstituted 1,3,5-triazapentadienate anions as ancillary ligands: [N(Ar)C(NMe2)NC(NMe2)N(R)](-) (Ar = Ph, 2,6-(i)Pr2-C6H3; R = H, SiMe3)

Addition reaction of ArN(SiMe 3)M (Ar = Ph or 2,6 - (i) Pr 2-C 6H 3 (Dipp); M = Li or Na) to 2 equivalents of alpha-hydrogen-free nitrile RCN (R = dimethylamido) gave the dimeric [M{N(Ar)C(NMe 2)NC(NMe 2)N(SiMe 3)}] 2 ( 1a, Ar = Ph, M = Li; 1b, Ar = Ph, M = Na; 1c, Ar = Dipp, M = Li). 1d was obtained by hydrolysis of 1c at ambient temperature. Treatment of a double ratio of 1a or 1b with anhydrous MCl 2 (M = Mn, Fe, Co) yielded the 1,3,5-triazapentadienato complexes [M{N(Ph)C(NMe 2)NC(NMe 2)N(SiMe 3)} 2] (M = Mn, 2; Fe, 3; Co, 4) and with NiCl 2.6H 2O gave [M{N(Ph)C(NMe 2)NC(NMe 2)N(H)} 2] (M = Ni, 5). Treatment of an equiv of 1c with anhydrous CuCl in situ and in air led to complexes [{N(Dipp)C(NMe 2)NC(NMe 2)N(SiMe 3)}CuPPh 3] 6 and [Cu{N(Dipp)C(NMe 2)NC(NMe 2)N(H)} 2] 7, respectively. 1c, 1d, and 2- 7 were characterized by X-ray crystallography and microanalysis. 1c, 1d, 5, and 6 were well characterized by (1)H, (13)C NMR, 1c by (7)Li, and 6 by (31)P NMR as well. The structural features of these complexes were described in detail.     

Low-valent chemistry of cobalt amide. Synthesis and structural characterization of cobalt(II) amido, aryloxide, and thiolate compounds

The binuclear cobalt(II) amide complex [(CoL2)2-(TMEDA)] (1) [L = N(Si(t)BuMe2)(2-C5H3N-6-Me); TMEDA = Me2NCH2CH2NMe2] has been synthesized by the reaction of anhydrous CoCl2 with 2 equiv of [Li(L)(TMEDA)]. X-ray crystallography revealed that complex 1 consists of two [CoL2] units linked by one TMEDA ligand molecule, which binds in an unusual N,N'-bridging mode. Protolysis of 1 with the bulky phenol Ar(Me)OH (Ar(Me) = 2,6-(t)Bu2-4-MeC6H2) and thiophenol ArSH (Ar = 2,4,6-(t)Bu3C6H2) gives the neutral monomeric cobalt(II) bis(aryloxide) [Co(OAr(Me))2(TMEDA)] (2) and dithiolate [Co(SAr)2(TMEDA)] (3), respectively. Complexes 1-3 have been characterized by mass spectrometry, microanalysis, magnetic moment, and melting-point measurements, in addition to X-ray crystallography.     

Synthesis and structural comparison of triaryl(sulfonylimino)pnictoranes

Triarylphosphanes 1 (Ar(3)P; Ar = Ph, 4-MeC(6)H(4)), triphenylarsane (2), and triarylstibanes 3 (Ar(3)Sb; Ar = 2-MeC(6)H(4), 2-MeOC(6)H(4)) reacted with trifluoromethanesulfonamide (7a) in the presence of equimolar diethyl azodicarboxylate to afford the corresponding triaryl(sulfonylimino)pnictoranes [Ar(3)M=NSO(2)CF(3); 8 (M = P), 9 (M = As), 10 (M = Sb)]. The Kirsanov-type reaction of triarylantimony dichlorides 5 (Ar(3)SbCl(2); Ar = 2-MeC(6)H(4), 2-MeOC(6)H(4)) and triarylbismuth dichlorides 6 (Ar(3)BiCl(2); Ar = 2-MeC(6)H(4), 2-MeOC(6)H(4), 2,4,6-Me(3)C(6)H(2)) with sulfonamides 7 (H(2)NSO(2)R; R = CF(3), 4-MeC(6)H(4), Me) in the presence of 2 equiv of potassium tert-butoxide yielded triaryl(sulfonylimino)-lambda(5)-stibanes 10 and -bismuthanes 11, respectively. The ortho-substitution in aryl ligands of 10 and 11 has been found to bring about considerable kinetic stabilization of the reactive Sb=N and Bi=N bonds. A structural comparison was made for a series of triaryl(sulfonylimino)pnictoranes 8-11 by IR spectroscopy and X-ray crystallography. In the IR spectra of 9-11, SO(2) asymmetric stretching absorptions (nu(SO2)) were observed at lower wavenumbers as compared to those of phosphorus counterparts 8. The difference in frequency (Deltanu(SO2)) from 8 increased progressively as the pnictogen element being utilized moved down the group 15 column on the periodic table. X-ray crystallographic analyses of eight of the triaryl(sulfonylimino)pnictoranes prepared confirmed the increasing single-bond character of the M=N bond, with the contribution from the canonical structure M(+)-N=S(O)-O(-) increasing in importance in the order P < As < Sb < Bi. Among all triaryl(sulfonylimino)pnictoranes examined, only imino-lambda(5)-bismuthanes 11 oxidized alcohols to carbonyl compounds.     

Synthesis of triamidoamine ligands of the type (ArylNHCH(2)CH(2))(3)N and molybdenum and tungsten complexes that contain an [ArylNCH(2)CH(2))(3)N]3- ligand

Aryl bromides react with (H(2)NCH(2)CH(2))(3)N in a reaction catalyzed by Pd(2)(dba)(3) in the presence of BINAP and NaO-t-Bu to give the arylated derivatives (ArylNHCH(2)CH(2))(3)N [Aryl = C(6)H(5) (1a), 4-FC(6)H(4) (1b), 4-t-BuC(6)H(4) (1c), 3,5-Me(2)C(6)H(3) (1d), 3,5-Ph(2)C(6)H(3) (1e), 3,5-(4-t-BuC(6)H(4))(2)C(6)H(3) (1f), 2-MeC(6)H(4) (1g), 2,4,6-Me(3)C(6)H(2) (1h)]. Reactions between (ArNHCH(2)CH(2))(3)N (Ar = C(6)H(5), 4-FC(6)H(4), 3,5-Me(2)C(6)H(3), and 3,5-Ph(2)C(6)H(3)) and Mo(NMe(2))(4) in toluene at 70 degrees C lead to [(ArNHCH(2)CH(2))(3)N]Mo(NMe(2)) complexes in yields ranging from 64 to 96%. Dimethylamido species (Ar = 4-FC(6)H(4), 3,5-Me(2)C(6)H(3)) could be converted into paramagnetic [(ArNHCH(2)CH(2))(3)N]MoCl species by treating them with 2,6-lutidinium chloride in tetrahydrofuran (THF). The "direct reaction" between 1a-f and MoCl(4)(THF)(2) in THF followed by 3 equiv of MeMgCl yielded [(ArNHCH(2)CH(2))(3)N]MoCl species (3a-f) in high yield. If 4 equiv of LiMe instead of MeMgCl are employed in the direct reaction, then [(ArNHCH(2)CH(2))(3)N]MoMe species are formed. Tungsten species, [(ArNHCH(2)CH(2))(3)N]WCl, could be prepared by analogous "direct" methods. Cyclic voltammetric studies reveal that MoCl complexes become more difficult to reduce as the electron donating ability of the [ArylNCH(2)CH(2))(3)N]3- ligand increases, and the reductions become less reversible, consistent with ready loss of chloride from ([(ArNHCH(2)CH(2))(3)N]MoCl)(-). Tungsten complexes are more difficult to reduce, and reductions are irreversible on the CV time scale.     

Tantalum amido and imido complexes supported by tris[(2-indolyl)methyl]amine,a tetradentate trianionic ligand with reduced pi-donor character

Tris[(2-indole)methyl]amine, N(CH2inH)3, may be readily obtained by reaction of methyl 2-bromomethyl-1-indolecarboxylate with NH3 followed by deprotection with NaOMe/MeOH. In its deprotonated form, [N(CH2in)3]3- is an efficient tetradentate trianionic ligand for tantalum, as illustrated by the isolation and structural characterization of [eta 4-N(CH2in)3]Ta(NAr)(NMe2H) (Ar = 2,6-C6H3Pri2), [eta 4-N(CH2in)3]Ta(NMe2)2 and [eta 4-N(CH2in)3]Ta(NMe2)Cl. The [N(CH2in)3]3- ligand has a structural similarity to that of [N(CH2CH2NR)3]3-, but differs electronically from the latter due to its reduced pi-donor capability, a direct result of the nitrogen being a component of the aromatic pi-system of the indolyl fragment.     

Novel reactions of phosphorus(III) azides and isocyanates: unusual modes of cycloaddition with dipolarophiles and an unexpected case of ring expansion

New modes of 1,3-dipolar cycloaddition are uncovered by the isolation of [CH2(6-t-Bu-4-Me-C6H2O)2]P(C(CO2Me)C(CO2Me)N[NP(N3)(OC6H2-6-t-Bu-4-Me)2CH2]N) (3) and [CH2(6-t-Bu-4-Me-C6H2O)2]P(C(CO2Me)C(CO2Me)C(O)N) (4) on treating [CH2(6-t-Bu-4-Me-C6H2O)2]P-X [X = N3 (1) and NCO (2)] with the dipolarophile MeO2CC identical to CCO2Me; compound 4 undergoes an unprecedented ring expansion upon addition of 2-(methylamino)ethanol to afford the spirocycle [CH2(6-t-Bu-4-Me-C6H2O)2]P(OCH2CH2N(Me)CH(CO2Me)CH(CO2Me)C(O)N) (5).     

o-Phenylene-bridged Cp/sulfonamido titanium complexes for ethylene/1-octene copolymerization

The Suzuki-coupling reaction of 2-(dihydroxyboryl)-3,4-dimethyl-2-cyclopenten-1-one and 2-(dihydroxyboryl)-3-methyl-2-cyclopenten-1-one with 2-bromoaniline derivatives affords cyclopentenone compounds from which cyclopentadiene compounds, 4,6-R'(2)-2-(2,5-Me2C5H3)C6H2NH2 and 4,6-R'(2)-2-(2,3,5-Me3C5H2)C6H2NH2 are prepared. After sulfonation of the -NH2 group with p-TsCl, metallation is carried out by successive addition of Ti(NMe2)4 and Me2SiCl2 affording o-phenylene-bridged Cp/sulfonamido titanium dichloride complexes, [4,6-R'(2)-2-(2,5-Me2C5H2)C6H2NSO2C6H4CH3)]TiCl2 (R'=H, ; R'=Me, ; R'=F, ) and [4,6-R'(2)-2-(2,3,5-Me3C5H)C6H2NSO2C6H4CH3)]TiCl2 (R'=H, ; R'=Me, ; R'=F, ). The molecular structures of and [2-(2,5-Me2C5H2)C6H4NSO2C6H4CH3)]Ti(NMe2)2 are determined by X-ray crystallography. The Cp(centroid)-Ti-N angle in is smaller (100.90 degrees) than that observed for the CGC (constrained-geometry catalyst), [Me2Si(eta5-Me4Cp)(NtBu)]TiCl2 (107.6 degrees) indicating a more "constrained feature" in than in the CGC. Complex shows the highest activity among the newly prepared complexes in ethylene/1-octene copolymerization but it is slightly inferior to the CGC in terms of activity, comonomer-incorporation ability, and molecular weight of the obtained polymers.     

Cationic Rh complexes with novel spiro tetraarylpentaborate anions prepared from arylboronic acids and aryloxorhodium complexes

Ar-B(OH)2 (1a: Ar = C6H4OMe-4, 1b: Ar = C6H3Me2-2,6) react immediately with Rh(OC6H4Me-4)(PMe3)3 (2) in 5 : 1 molar ratio at room temperature to generate [Rh(PMe3)4]+[B5O6Ar4]- (3a: Ar = C6H4OMe-4, 3b: Ar = C6H3Me2-2,6). p-Cresol (92%/Rh), anisole (80%/Rh) and H2O (364%/Rh) are formed from 1a and 2. The reaction of 1a with 2 for 24 h produces [Rh(PMe3)4]+[B5O6(OH)4]- (4) as a yellow solid. This is attributed to hydrolytic dearylation of once formed 3a because the direct reaction of 3a with excess H2O forms 4. An equimolar reaction of 2 with phenylboroxine (PhBO)3 causes transfer of the 4-methylphenoxo ligand from rhodium to boron to produce [Rh(PMe3)4]+[B3O3Ph3(OC6H4Me-4)]- (5). Arylboronic acids 1a and 1b react with Rh(OC6H4Me-4)(PR3)3 (6: R = Et, 8: R = Ph) and with Rh(OC6H4Me-4)(cod)(PR3) (11: R = iPr, 12: R = Ph) to form [Rh(PR3)4]+[B5O6Ar4]- (7a: R = Et, Ar = C6H4OMe-4, 7b: R = Et, Ar = C6H3Me2-2,6, 9a: R = Ph, Ar = C6H3Me2-2,6) and [Rh(cod)(PR3)(L)]+[B5O6Ar4]- (13b: R = iPr, L = acetone, Ar = C6H3Me2-2,6, 14a: R = Ph, L = PPh3, Ar = C6H4OMe-4, 14b: R = Ph, L = PPh3, Ar = C6H3Me2-2,6), respectively. Hydrolysis of 14a yields [Rh(cod)(PPh3)2]+[B5O6(OH)4]- (15) quantitatively.     

Synthesis, structural characterization, reactivity, and thermal stability of [eta(5):sigma-Me2C(C5H4)(C2B10H10)]Ti(R)(NMe2)

Reaction of [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]TiCl(NMe2) (1) with 1 equiv of PhCH2K, MeMgBr, or Me3SiCH2Li gave corresponding organotitanium alkyl complexes [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(R)(NMe2) (R = CH2Ph (2), CH2SiMe3 (4), or Me (5)) in good yields. Treatment of 1 with 1 equiv of n-BuLi afforded the decomposition product {[eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti}2(mu-NMe)(mu:sigma-CH2NMe) (3). Complex 5 slowly decomposed to generate a mixed-valence dinuclear species {[eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti}2(mu-NMe2)(mu:sigma-CH2NMe) (6). Complex 1 reacted with 1 equiv of PhNCO or 2,6-Me2C6H3NC to afford the corresponding monoinsertion product [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(Cl)[eta(2)-OC(NMe2)NPh] (7) or [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(Cl)[eta(2)-C(NMe2)=N(2,6-Me2C6H3)] (8). Reaction of 4 or 5 with 1 equiv of R'NC gave the titanium eta(2)-iminoacyl complexes [eta:(5)sigma-Me2C(C5H4)(C2B10H10)]Ti(NMe2)[eta(2)-C(R)=N(R')] (R = CH2SiMe3, R' = 2,6-Me2C6H3 (9) or tBu (10); R = Me, R' = 2,6-Me2C6H3 (11) or tBu (12)). The results indicated that the unsaturated molecules inserted into the Ti-N bond only in the absence of the Ti-C(alkyl) bond and that the Ti-C(cage) bond remained intact. All complexes were fully characterized by various spectroscopic techniques and elemental analyses. Molecular structures of 2, 3, 6-8, and 10-12 were further confirmed by single-crystal X-ray analyses.     

Synthesis, reactivity studies, structural aspects, and solution behavior of half sandwich ruthenium(II) N,N',N'-triarylguanidinate complexes

[(η(6)-C(10)H(14))RuCl(μ-Cl)](2) (η(6)-C(10)H(14) = η(6)-p-cymene) was subjected to a bridge-splitting reaction with N,N',N'-triarylguanidines, (ArNH)(2)C═NAr, in toluene at ambient temperature to afford [(η(6)-C(10)H(14))RuCl{κ(2)(N,N')((ArN)(2)C-N(H)Ar)}] (Ar = C(6)H(4)Me-4 (1), C(6)H(4)(OMe)-2 (2), C(6)H(4)Me-2 (3), and C(6)H(3)Me(2)-2,4 (4)) in high yield with a view aimed at understanding the influence of substituent(s) on the aryl rings of the guanidine upon the solid-state structure, solution behavior, and reactivity pattern of the products. Complexes 1-3 upon reaction with NaN(3) in ethanol at ambient temperature afforded [(η(6)-C(10)H(14))RuN(3){κ(2)(N,N')((ArN)(2)C-N(H)Ar)}] (Ar = C(6)H(4)Me-4 (5), C(6)H(4)(OMe)-2 (6), and C(6)H(4)Me-2 (7)) in high yield. [3 + 2] cycloaddition reaction of 5-7 with RO(O)C-C≡C-C(O)OR (R = Et (DEAD) and Me (DMAD)) (diethylacetylenedicarboxylate, DEAD; dimethylacetylenedicarboxylate, DMAD) in CH(2)Cl(2) at ambient temperature afforded [(η(6)-C(10)H(14))Ru{N(3)C(2)(C(O)OR)(2)}{κ(2)(N,N')((ArN)(2)C-N(H)Ar)}]·xH(2)O (x = 1, R = Et, Ar = C(6)H(4)Me-4 (8·H(2)O); x = 0, R = Me, Ar = C(6)H(4)(OMe)-2 (9), and C(6)H(4)Me-2 (10)) in moderate yield. The molecular structures of 1-6, 8·H(2)O, and 10 were determined by single crystal X-ray diffraction data. The ruthenium atom in the aforementioned complexes revealed pseudo octahedral "three legged piano stool" geometry. The guanidinate ligand in 2, 3, and 6 revealed syn-syn conformation and that in 4, and 10 revealed syn-anti conformation, and the conformational difference was rationalized on the basis of subtle differences in the stereochemistry of the coordinated nitrogen atoms caused by the aryl moiety in 3 and 4 or steric overload caused by the substituents around the ruthenium atom in 10. The bonding pattern of the CN(3) unit of the guanidinate ligand in the new complexes was explained by invoking n-π conjugation involving the interaction of the NHAr/N(coord)Ar lone pair with C═Nπ* orbital of the imine unit. Complexes 1, 2, 5, 6, 8·H(2)O, and 9 were shown to exist as a single isomer in solution as revealed by NMR data, and this was ascribed to a fast C-N(H)Ar bond rotation caused by a less bulky aryl moiety in these complexes. In contrast, 3 and 10 were shown to exist as a mixture of three and five isomers in about 1:1:1 and 1·0:1·2:2·7:3·5:6·9 ratios, respectively in solution as revealed by a VT (1)H NMR, (1)H-(1)H COSY in conjunction with DEPT-90 (13)C NMR data measured at 233 K in the case of 3. The multiple number of isomers in solution was ascribed to the restricted C-N(H)(o-tolyl) bond rotation caused by the bulky o-tolyl substituent in 3 or the aforementioned restricted C-NH(o-tolyl) bond rotation as well as the restricted ruthenium-arene(centroid) bond rotation caused by the substituents around the ruthenium atom in 10.     

Structural Aspects of Lithium Arenethiolate Complexes with Intramolecular Coordinating Amine Donors

Reaction of aryllithium reagents LiR (R = C(6)H(4)((R)-CH(Me)NMe(2))-2 (1a), C(6)H(3)(CH(2)NMe(2))(2)-2,6 (1b), C(6)H(4)(CH(2)N(Me)CH(2)CH(2)OMe)-2 (1c)) with 1 equiv of sulfur (1/8 S(8)) results in the quantitative formation of the corresponding lithium arenethiolates [Li{SC(6)H(4)((R)-CH(Me)NMe(2))-2}](6) (3), [Li{SC(6)H(3)(CH(2)NMe(2))(2)-2,6}](6) (4), and [Li{SC(6)H(4)(CH(2)N(Me)CH(2)CH(2)OMe)-2}](2) (5). Alternatively, 3 can be prepared by reacting the corresponding arenethiol HSC(6)H(4)((R)-CH(Me)NMe(2))-2 (2) with (n)BuLi. X-ray crystal structures of lithium arenethiolates 3 and 4, reported in abbreviated form, show them to have hexanuclear prismatic and hexanuclear planar structures, respectively, that are unprecedented in lithium thiolate chemistry. The lithium arenethiolate [Li{SC(6)H(4)(CH(2)N(Me)CH(2)CH(2)OMe)-2}](2) (5) is dimeric in the solid state and in solution, and crystals of 5 are monoclinic, space group P2(1)/c, with a = 17.7963(9) ?, b = 8.1281(7) ?, c = 17.1340(10) ?, beta = 108.288(5) degrees, Z = 4, and final R = 0.047 for 4051 reflections with F > 4sigma(F). Hexameric 4 reacts with 1 equiv of lithium iodide and 2 equiv of tetrahydrofuran to form the dinuclear adduct [Li(2)(SAr)(I)(THF)(2)] (6). Crystals of 6 are monoclinic, space group P2(1)/c, with a = 13.0346(10) ?, b = 11.523(3) ?, c = 16.127(3) ?, beta = 94.682(10) degrees, Z = 4, and final R = 0.059 for 3190 reflections with F > 4sigma(F).     

Synthesis, structural characterization, and theoretical investigation of compounds containing an Al-O-M-O-Al (M=Ti, Zr) core

We report a facile route to the first molecular compounds with the Al-O-M-O-Al (M=Ti, Zr) structural motif. Synthesis of L(Me)Al(mu-O)M(NMe2)2(mu-O)Al(Me)L [L=CH{N(Ar)(CMe)}2, Ar=2,6-iPr2C6H3; M=Ti (7), Zr (8)] was accomplished by reacting the monometallic hydroxide precursor L(Me)Al(OH) (1) with Ti(NMe2)4 or Zr(NMe2)4 under elimination of Me2NH in good yield. The crystal structural data confirm the trimetallic Al-O-M-O-Al core in both 7 and 8. Preliminary investigation on catalytic activity of these complexes reveals low activity of these complexes in ethylene polymerization as compared to the related oxygen-bridged metallocene-based heterobimetallic complexes L(Me)Al(mu-O)M(Me)Cp2 (M=Ti, Zr) which could be attributed to the relatively lower stability of the supposed cationic intermediate as revealed by DFT calculations.