蔬果类商品网上直销包装作业工序优化模型研究

针对蔬果类商品网上直销模式下,其标准销售单元包装作业问题规模大、商品品类多、订单个性化强、生产配送周期多等特点,基于批量流水作业生产、JIT准时制生产及周期调度的思想,研究该类商品标准销售单元包装作业的生产调度问题,建立蔬果类商品网上直销包装作业优化模型,并设计改进的“模拟增压——退火算法”对其进行求解,以便制定出合理的包装作业计划,有效衔接采摘和订单分拣作业以及后续装车作业,缩短包装时间,保证蔬菜的新鲜性。最后,通过应用实例验证模型和算法的有效性,结果表明,本文周期调度方法得到的调度方案比一般的非周期调度方法大大节约了包装作业成本,为蔬果类商品网上直销企业生成包装作业计划提供了理论指导。     

粒子群遗传混合算法求解考虑传输时间的FJSP

在某些生产制造场景中,工件在不同机器间的传输时间对车间调度的总拖期具有重要影响,本文基于此扩展了总拖期最小的柔性作业车间调度模型。针对问题模型的复杂性,采用粒子群优化算法和遗传算法的混合算法进行求解。在初始化过程以一定概率优选加工时间和传输时间短的机器并排除调度频繁的机器,使种群在保持多样性的前提下尽量选择优化结果好的个体;采用线性调整的方式动态改变交叉概率和变异概率的值,使种群在遗传算法的不同阶段具有不同的搜索强度;采用粒子群优化算法进行局部搜索,弥补了遗传算法局部搜索能力的不足。最后采用本文方法和其他方法求解柔性作业车间调度问题实例,并对比不同水平层次传输时间下的总拖期,验证了本文方法的有效性。     

改进的萤火虫算法求解具有学习退化效应的JSP问题

作业车间调度问题是典型的NP难题,在生产调度领域具有很高的研究价值.一种更为符合实际的作业车间调度问题是加工机器具有学习退化效应,它能够为生产者安排生产计划提供借鉴.为了可以更好的解决具有学习退化效应的作业车间调度问题,本文提出了改进的萤火虫算法(IFA),即在基本的萤火虫算法基础上增加了局部寻优的过程,并融合了布谷鸟算法中生物移动的莱维分布特点.通过MATLAB模拟分析,IFA能够更快速的收敛到JSP的最优解.最后,本文分析了不同学习率与退化效应因子组合对目标函数求解的影响.     

考虑模糊交货期的柔性作业车间动态调度研究

针对柔性作业车间调度在机器故障扰动情况下的动态性,采用基于事件与周期混合驱动的滚动窗口再调度策略进行动态调度.对于工件交货期模糊的情况采用梯形交货期窗口表示,并运用字典序多目标规划的方法,以平均流经时间最小、能耗最小、客户满意度最大为目标,建立多目标柔性作业车间动态调度模型,并设计了改进的自适应免疫遗传算法,在对种群进行初始化时,将初始化机器、初始化工序及随机初始化结合在一起,并对模型进行求解.将算例仿真结果与遗传算法所得的结果进行对比,验证算法的有效性.     

模糊环境下的柔性工作车间调度模型的研究

本首先引入了柔性生产系统下的调度过程中存在的不确定性问题，接着对存在模糊操作时间间隔的柔性工作车间调度问题及相关概念进行了描述，并且给出了以最小makespan为目标的基于模糊逻辑和遗传优化的调度模型，最后通过实例验证了模型的可行性。     

基于交通流的多模糊时间窗车辆路径优化

研究了基于交通流的多模糊时间窗车辆路径问题,考虑了实际中不断变化的交通流以及客户具有多个模糊时间窗的情况,以最小化配送总成本和最大化客户满意度为目标,构建基于交通流的多模糊时间窗车辆路径模型。根据伊藤算法的基本原理,设计了求解该模型的改进伊藤算法,结合仿真算例进行了模拟计算,并与蚁群算法的计算结果进行了对比分析,结果表明,利用改进伊藤算法求解基于交通流的多模糊时间窗车辆路径问题,迭代次数小,效率更高,能够在较短的时间内收敛到全局最优解,可以有效的求解多模糊时间窗车辆路径问题。     

模糊生产系统中的多类型差异作业平行机批调度优化

针对现实生产制造系统中存在的时间参数模糊化问题,采用梯形模糊数表征时间参数,给出了一种具有模糊加工时间、模糊交货期与模糊批次间隔的,以最小化制造跨度和最小化提前/拖期惩罚为目标的多类型差异作业平行机批调度问题模型。在问题求解方面,给出了一种具有量子行为的,采用混沌局部优化的混合粒子群算法,避免求解过程陷入局部最优。仿真实验验证了该算法具有可行性和有效性。     

车间作业调度的可行化判定及不可行解的纠正

生产调度过程中出现不可行解是调度研究经常遇到的问题之一.提出了对JSP调度方案进行可行化判定和纠正不可行解的可行算子,算子包括了基于有向图拓扑排序原理对车间作业调度方案进行可行判定的方法和将不可行解纠正为可行解的算法.证明了该纠正算法总能成功,并对算子的功能进行了拓展使之还可应用于不完备调度.最后讨论了可行算子的特点、时间效率和应用前景.     

模糊环境下的差异作业平行机批调度优化问题研究

针对现实生产制造系统中存在的时间参数模糊化问题,采用梯形模糊数表征时间参数,给出了一种具有模糊加工时间与模糊批次间隔的,以最小化制造跨度为目标的差异作业平行机批调度问题模型。在问题求解方面,给出了一种基于粒子群优化和差异进化的混合优化算法,避免求解过程陷入局部最优,并通过改进的Batch First Fit算法获得优化的分批。仿真实验验证了该算法具有可行性和有效性。     

模糊网络关键路径问题的模糊线性规划方法

构建了模糊线性规划模型及其对偶规划模型,用于求解工期模糊情况下的项目关键路径问题,克服了传统的正向和逆向递推方法中存在的计算繁琐问题.在模糊线性规划模型中,通过枚举不同α—cut值,利用一种基于区间数距离测度的模糊数排序法,改进了现有模糊线性规划模型目标函数,计算出模糊总工期和所有可能的关键路径,解决了现有模糊线性规划模型构建中,未能同时考虑到工期模糊时关键路径可能会发生改变问题以及项目可能存在多条关键路径问题.在对偶规划模型中,通过对项目活动模糊时间参数基于α—cut重新定义,求解出活动的模糊时间参数,克服了已有模糊线性规划模型中要么仅能求出事项(节点)的模糊时间参数但未求出活动的模糊时间参数,要么求出了活动模糊时间参数但其最晚完成时间参数定义不正确的缺陷.     

带学习效应和资源依赖的单机排序模型

在工业生产中,随着员工操作技能的熟练程度的增加,对于相同的任务越往后加工,所花的时间将会减少。 同时,为了尽早完工,管理者也会考虑给加工工件分配一定量的额外资源来缩短工件加工时间。 本文基于以上实例,讨论了工件的实际加工时间既具有学习效应又依赖所分配资源的单机排序问题。 在问题中,假设工件的学习效应是之前已加工工件正常加工时间和的指数函数。 同时随着分配给工件资源量的增加,工件的实际加工时间呈线性减少,所需费用呈线性增加。对这一排序模型,主要探讨以下五个目标函数:最小化最大完工时间与资源消耗量总费用的和;最小化总完工时间与资源消耗量总费用的和;最小化加权总完工时间与资源消耗量总费用的和;最小化总提前、总延误、总共同交货期与资源消耗量总费用的和以及最小化总提前、总延误、总松弛交货期与资源消耗量总费用的和。 本文对前三个目标函数相应的排序问题给出了多项式时间可求解的算法。 对后两个目标函数所涉及的排序问题借助于指派问题分别给出了时间复杂性为O(n³)的算法。     

Single-machine and two-machine flowshop scheduling problems with truncated position-based learning functions

Scheduling with learning effects has received growing attention nowadays. A well-known learning model is called ‘position-based learning’ in which the actual processing time of a job is a non-increasing function of its position to be processed. However, the actual processing time of a given job drops to zero precipitously as the number of jobs increases. Motivated by this observation, we propose two truncated learning models in single-machine scheduling problems and two-machine flowshop scheduling problems with ordered job processing times, respectively, where the actual processing time of a job is a function of its position and a control parameter. Under the proposed learning models, we show that some scheduling problems can be solved in polynomial time. In addition, we further analyse the worst-case error bounds for the problems to minimize the total weighted completion time, discounted total weighted completion time and maximum lateness.     

Single-machine scheduling with deteriorating jobs and past-sequence-dependent setup times

In many realistic scheduling settings a job processed later consumes more time than the same job processed earlier – this is known as scheduling with deteriorating jobs. Most research on scheduling with deteriorating jobs assumes that the actual processing time of a job is an increasing function of its starting time. Thus a job processed late may incur an excessively long processing time. On the other hand, setup times occur in manufacturing situations where jobs are processed in batches whereby each batch incurs a setup time. This paper considers scheduling with deteriorating jobs in which the actual processing time of a job is a function of the logarithm of the total processing time of the jobs processed before it (to avoid the unrealistic situation where the jobs scheduled late will incur excessively long processing times) and the setup times are proportional to the actual processing times of the already scheduled jobs. Under the proposed model, we provide optimal solutions for some single-machine problems.     

Single-machine scheduling with deteriorating functions for job processing times

In many realistic scheduling settings a job processed later consumes more time than when it is processed earlier – this phenomenon is known as scheduling with deteriorating jobs. In the literature on deteriorating job scheduling problems, majority of the research assumed that the actual job processing time of a job is a function of its starting time. In this paper we consider a new deterioration model where the actual job processing time of a job is a function of the processing times of the jobs already processed. We show that the single-machine scheduling problems to minimize the makespan and total completion time remain polynomially solvable under the proposed model. In addition, we prove that the problems to minimize the total weighted completion time, maximum lateness, and maximum tardiness are polynomially solvable under certain agreeable conditions.     

Simultaneous Job Scheduling and Resource Allocation on Parallel Machines

Most deterministic production scheduling models assume that the processing time of a job on a machine is fixed externally and known in advance of scheduling. However, in most realistic situations, apart from the machines, it requires additional resources to process jobs, and the processing time of a job is determined internally by the amount of the resources allocated. In these situations, both the cost associated with the job schedule and the cost of the resources allocated should be taken into account. Therefore, job scheduling and resource allocation should be carefully coordinated and optimized jointly in order to achieve an overall cost-effective schedule. In this paper, we study a parallel-machine scheduling model involving both job processing and resource allocation. The processing time of a job is non-increasing with the cost of the allocated resources. The objective is to minimize the total cost including the cost measured by a scheduling criterion and the cost of all allocated resources. We consider two particular problems of this model, one with the scheduling criterion being the total weighted completion time, and the other with that being the weighted number of tardy jobs. We develop a column generation based branch and bound method for finding optimal solutions for these NP-hard problems. The method first formulates the problems as set partitioning type formulations, and then solves the resulting formulations exactly by branch and bound. In the branch and bound, linear relaxations of the set partitioning type formulations are decomposed into master problems and single-machine subproblems and solved by a column generation approach. The algorithms developed based on this method are capable of solving the two problems with a medium size to optimality within a reasonable computational time.     

Single-machine scheduling with logarithm deterioration

Traditionally, job processing times are assumed to be known and fixed; however, there are many situations in which a job that is processed later consumes more time than the same job when it is processed earlier. This is known as deteriorating jobs scheduling in the literature. Most of the research in deteriorating jobs scheduling assumes that the actual job processing time is a linear function of its starting time. Thus, the actual job processing times might increase significantly if the number of jobs or the job sizes increase. Motivated by this limitation, this paper addresses a new deterioration model where the actual job processing time is a function of the logarithm of the job processing times already processed. Under the proposed model, we provide the optimal solutions for some single-machine problems.     

Single-machine scheduling with time window-dependent processing times

In the one-machine scheduling problems analysed in this paper, the processing time of a job depends on the time at which the job is started. More precisely, the horizon is divided into time windows and with each one a coefficient is associated that is used to determine the actual processing time of a job starting in it. Two models are introduced, and one of them has direct connections with models considered in previous papers on scheduling problems with time-dependent processing times. Various computational complexity results are presented for the makespan criterion, which show that the problem is NP-hard, even with two time windows. Solving procedures are also proposed for some special cases.     

Worst-case behavior of simple sequencing rules in flow shop scheduling with general position-dependent learning effects

A real industrial production phenomenon, referred to as learning effects, has drawn increasing attention. However, most research on this issue considers only single machine problems. Motivated by this limitation, this paper considers flow shop scheduling problems with a general position-dependent learning effects. By the general position-dependent learning effects, we mean that the actual processing time of a job is defined by a general non-increasing function of its scheduled position. The objective is to minimize one of the five regular performance criteria, namely, the total completion time, the makespan, the total weighted completion time, the total weighted discounted completion time, and the sum of the quadratic job completion times. We present heuristic algorithms by using the optimal permutations for the corresponding single machine scheduling problems. We also analyze the worst-case bound of our heuristic algorithms.     

Survey on fuzzy shop scheduling

The real life scheduling problems often have several uncertainties. The solutions of these problems can provide deeper insights to the decision maker than those of deterministic problems. Fuzzy set theory as most important tool to model uncertainty represents an attractive tool to aid research in the production management. Since to the best of our knowledge, there is not a comprehensive review on the fuzzy scheduling literature, the goal of this paper is to provide an extensive review for the fuzzy machine scheduling which it covers more than 140 papers. For this purpose, first, this paper classifies and reviews the literature according to shop environments, including single machine, parallel machines, flowshop, job shop and open shop. Then the reviewed literature is quantified and measured. At the end the paper concludes by presenting some problems receiving less attention than the others and proposing some research opportunities in the field.     

具有CON/SLK交货期指派的一类单机排序问题

研究工件的实际加工时间既具有指数学习效应,又依赖所消耗资源的准时制排序问题.在模型中,探讨了共同交货期(CON)和松弛交货期(SLK)两种情形.管理者的目标是确定最优序、最优资源分配方案和最佳工期(共同交货期或松弛交货期)以便极小化工件的总延误、总提前、总工期和资源消耗费用的总和.对于工件的实际加工时间是资源消耗量的线性函数的排序问题,通过将其转化为指派模型,给出了时间复杂性为O(n~3)的算法,从而证明该类排序问题是多项式时间可求解的.针对工件的实际加工时间是资源消耗量的凸函数的排序问题,也给出了多项式算法.