Hierarchical Hollow-Nanocube Ni−Co Skeleton@MoO3/MoS2 Hybrids for Improved-Performance Lithium-Ion Batteries

Improving the performance of anode materials for lithium-ion batteries (LIBs) is a hotly debated topic. Herein, hollow Ni−Co skeleton@MoS₂/MoO₃ nanocubes (NCM-NCs), with an average size of about 193 nm, have been synthesized through a facile hydrothermal reaction. Specifically, MoO₃/MoS₂ composites are grown on Ni−Co skeletons derived from nickel–cobalt Prussian blue analogue nanocubes (Ni−Co PBAs). The Ni−Co PBAs were synthesized through a precipitation method and utilized as self-templates that provided a larger specific surface area for the adhesion of MoO₃/MoS₂ composites. According to Raman spectroscopy results, as-obtained defect-rich MoS₂ is confirmed to be a metallic 1T-phase MoS₂. Furthermore, the average particle size of Ni−Co PBAs (≈43 nm) is only about one-tenth of the previously reported particle size (≈400 nm). If assessed as anodes of LIBs, the hollow NCM-NC hybrids deliver an excellent rate performance and superior cycling performance (with an initial discharge capacity of 1526.3 mAh g⁻¹ and up to 1720.6 mAh g⁻¹ after 317 cycles under a current density of 0.2 A g⁻¹). Meanwhile, ultralong cycling life is retained, even at high current densities (776.6 mAh g⁻¹ at 2 A g⁻¹ after 700 cycles and 584.8 mAh g⁻¹ at 5 A g⁻¹ after 800 cycles). Moreover, at a rate of 1 A g⁻¹, the average specific capacity is maintained at 661 mAh g⁻¹. Thus, the hierarchical hollow NCM-NC hybrids with excellent electrochemical performance are a promising anode material for LIBs.     

Study of the Lithium Storage Mechanism of N-Doped Carbon-Modified Cu2S Electrodes for Lithium-Ion Batteries

Owing to their high specific capacity and abundant reserve, Cu_xS compounds are promising electrode materials for lithium-ion batteries (LIBs). Carbon compositing could stabilize the Cu_xS structure and repress capacity fading during the electrochemical cycling, but the corresponding Li⁺ storage mechanism and stabilization effect should be further clarified. In this study, nanoscale Cu₂S was synthesized by CuS co-precipitation and thermal reduction with polyelectrolytes. High-temperature synchrotron radiation diffraction was used to monitor the thermal reduction process. During the first cycle, the conversion mechanism upon lithium storage in the Cu₂S/carbon was elucidated by operando synchrotron radiation diffraction and in situ X-ray absorption spectroscopy. The N-doped carbon-composited Cu₂S (Cu₂S/C) exhibits an initial discharge capacity of 425 mAh g⁻¹ at 0.1 A g⁻¹, with a higher, long-term capacity of 523 mAh g⁻¹ at 0.1 A g⁻¹ after 200 cycles; in contrast, the bare CuS electrode exhibits 123 mAh g⁻¹ after 200 cycles. Multiple-scan cyclic voltammetry proves that extra Li⁺ storage can mainly be ascribed to the contribution of the capacitive storage.     

Nanohybridization of CoS2/MoS2 Heterostructure with Polyoxometalate on Functionalized Reduced Graphene Oxide for High-Performance LIBs

To address the poor cycling stability and low rate capability of MoS₂ as electrode materials for lithium-ion batteries (LIBs), herein, the CoS₂/MoS₂/PDDA-rGO/PMo₁₂ nanocomposites are constructed via a simple hydrothermal process, combining the advantages of all three, namely, CoS₂/MoS₂ heterojunction and polyoxometalates (POMs) provide abundant catalytically active sites and increase the multi-electron transfer ability, and the positively charged poly(diallyldimethylammonium chloride) modified reduced graphene oxide (PDDA-rGO) improve electronic conductivity and effectively prevent the aggregation of MoS₂, meanwhile stabilize the negatively charged [PMo₁₂O₄₀]³⁻. After the electrochemical testing, the resulting CoS₂/MoS₂/PDDA-rGO/PMo₁₂ nanocomposite achieved 1055 mA h g⁻¹ initial specific capacities and stabilized at 740 mA h g⁻¹ after 150 cycles at 100 mA g⁻¹ current density. And the specific capacities of MoS₂, MoS₂/PDDA-rGO, CoS₂/MoS₂, and CoS₂/MoS₂/PDDA-rGO were 201, 421, 518, and 589 at 100 mA g⁻¹ after 150 cycles, respectively. The fact of the greatly improving capacity of MoS₂-based nanocomposites suggests its potential for high performance electrode materials of LIBs. Moreover, the lithium storage mechanism of CoS₂/MoS₂/PDDA-rGO/PMo₁₂ has been discussed on the basis of cyclic voltammetry with different scan rates.     

General Formation of MxCo3−xS4 (M=Ni,Mn, Zn) Hollow Tubular Structures for Hybrid Supercapacitors

A simple and versatile method for general synthesis of uniform one‐dimensional (1D) M_xCo_3−xS₄ (M=Ni, Mn, Zn) hollow tubular structures (HTSs), using soft polymeric nanofibers as a template, is described. Fibrous core–shell polymer@M‐Co acetate hydroxide precursors with a controllable molar ratio of M/Co are first prepared, followed by a sulfidation process to obtain core–shell polymer@M_xCo_3−xS₄ composite nanofibers. The as‐made M_xCo_3−xS₄ HTSs have a high surface area and exhibit exceptional electrochemical performance as electrode materials for hybrid supercapacitors. For example, the MnCo₂S₄ HTS electrode can deliver specific capacitance of 1094 F g⁻¹ at 10 A g⁻¹, and the cycling stability is remarkable, with only about 6 % loss over 20 000 cycles.     

Synthesis and electrochemical properties of sulfur doped-LixMnO2−ySy materials for lithium secondary batteries

Sulfur doped lithium manganese oxides (Li_xMnO_2−yS_y) were prepared by ion exchange of sodium for lithium in Na_xMnO_2−yS_y precursors obtained by a sol–gel method. These materials had the nano-crystallite size, which was composed of grain size of about 100–200 nm. Especially, Li_0.56MnO_1.98S_0.02 delivered the initial discharge capacity of 170 mAh g⁻¹ and gradually increased the discharge capacity of 220 mAh g⁻¹ until 50 cycles. Moreover, it showed an excellent cycling behavior, although its original structure transformed into the spinel phase during cycling.     

Few-Layer MoS2 Nanosheets Encapsulated in N-Doped Carbon Hollow Spheres as Long-Life Anode Materials for Lithium-Ion Batteries

Two-dimensional molybdenum disulfide (MoS₂) has been recognized as a promising anode material for lithium-ion batteries (LIBs) due to its high theoretical capacity, but its rapid capacity decay owing to poor conductivity, structure pulverization, and polysulfide dissolution presents significant challenges in practical applications. Herein, triple-layered hollow spheres in which MoS₂ nanosheets are fully encapsulated between inner carbon and outer nitrogen-doped carbon (NC) were fabricated. Such an architecture provides high conductivity and efficient lithium-ion transfer. Moreover, the NC shell prevents aggregation and exfoliation of MoS₂ nanosheets and thus maintains the integrity of the nanostructure during the charge/discharge process. As anode materials for LIBs, the C@MoS₂@NC hollow spheres deliver a high reversible capacity (747 mA h g⁻¹ after 100 cycles at 100 mA g⁻¹) and excellent long-cycle performance (650 mA h g⁻¹ after 1000 cycles at 1.0 A g⁻¹), which confirm its potential for high-performance LIBs.     

Boosting Na+ Storage Ability of Bimetallic MoxW1−xSe2 with Expanded Interlayers

In spite of the valuable advancements in the fabrication of transition-metal selenides (TMSs)-based hybrid structures, only single-metal selenides have been obtained through most of the present methods. Herein, a facile room-temperature self-polymerization and subsequent selenization strategy is proposed for the synthesis of bimetallic Mo_xW_1−xSe₂ nanosheets with expanded interlayers decorated with N-doped carbon-matrix assembled flowerlike hierarchical microspheres (Mo_xW_1−xSe₂/NC). Depending on the excellent coordination ability of dopamine with metal ions, self-formed flowerlike single precursors are harvested. The unique hybrid architecture benefits the penetration of the electrolyte, accelerates Na⁺ insertion/extraction kinetics, enhances electron-transfer ability, and alleviates the volume expansion and aggregation during cycling processes. Therefore, the bimetallic Mo_xW_1−xSe₂/NC electrode delivers high reversible capacities of 264 mA h g⁻¹ at 1 A g⁻¹ for 700 cycles, 204.4 mA h g⁻¹ at 4 A g⁻¹ for 1400 cycles, and 153.3 mA h g⁻¹ at 8 A g⁻¹ for 2000 cycles, as well as an excellent rate capability up to 10 A g⁻¹ with a capacity of 188.9 mA h g⁻¹. Our study offers an effective strategy to boost sodium storage performance through elaborate structural engineering.     

Pseudocapacitive Lithium Storage of Cauliflower-Like CoFe2O4 for Low-Temperature Battery Operation

Binary transition-metal oxides (BTMOs) with hierarchical micro–nano-structures have attracted great interest as potential anode materials for lithium-ion batteries (LIBs). Herein, we report the fabrication of hierarchical cauliflower-like CoFe₂O₄ (cl-CoFe₂O₄) via a facile room-temperature co-precipitation method followed by post-synthetic annealing. The obtained cauliflower structure is constructed by the assembly of microrods, which themselves are composed of small nanoparticles. Such hierarchical micro–nano-structure can promote fast ion transport and stable electrode–electrolyte interfaces. As a result, the cl-CoFe₂O₄ can deliver a high specific capacity (1019.9 mAh g⁻¹ at 0.1 A g⁻¹), excellent rate capability (626.0 mAh g⁻¹ at 5 A g⁻¹), and good cyclability (675.4 mAh g⁻¹ at 4 A g⁻¹ for over 400 cycles) as an anode material for LIBs. Even at low temperatures of 0 °C and −25 °C, the cl-CoFe₂O₄ anode can deliver high capacities of 907.5 and 664.5 mAh g⁻¹ at 100 mA g⁻¹, respectively, indicating its wide operating temperature. More importantly, the full-cell assembled with a commercial LiFePO₄ cathode exhibits a high rate performance (214.2 mAh g⁻¹ at 5000 mA g⁻¹) and an impressive cycling performance (612.7 mAh g⁻¹ over 140 cycles at 300 mA g⁻¹) in the voltage range of 0.5–3.6 V. Kinetic analysis reveals that the electrochemical performance of cl-CoFe₂O₄ is dominated by pseudocapacitive behavior, leading to fast Li⁺ insertion/extraction and good cycling life.     

Double-Shelled Hollow SiO2@N-C Nanofiber Boosts the Lithium Storage Performance of [PMo12O40]3−

Polyoxometalates (POMs)-based materials, with high theoretical capacities and abundant reversible multi-electron redox properties, are considered as promising candidates in lithium-ion storage. However, the poor electronic conductivity, low specific surface area and high solubility in the electrolyte limited their practical applications. Herein, a double-shelled hollow PMo₁₂−SiO₂@N−C nanofiber (PMo₁₂−SiO₂@N−C, where PMo₁₂ is [PMo₁₂O₄₀]³⁻, N−C is nitrogen-doped carbon) was fabricated for the first time by combining coaxial electrospinning technique, thermal treatment and electrostatic adsorption. As an anode material for LIBs, the PMo₁₂−SiO₂@N−C delivered an excellent specific capacity of 1641 mA h g⁻¹ after 1000 cycles under 2 A g⁻¹. The excellent electrochemical performance benefited from the unique double-shelled hollow structure of the material, in which the outermost N−C shell cannot only hinder the agglomeration of PMo₁₂, but also improve its electronic conductivity. The SiO₂ inner shell can efficiently avoid the loss of active components. The hollow structure can buffer the volume expansion and accelerate Li⁺ diffusion during lithiation/delithiation process. Moreover, PMo₁₂ can greatly reduce charge-resistance and facilitate electron transfer of the entire composites, as evidenced by the EIS kinetics study and lithium-ion diffusion analysis. This work paves the way for the fabrication of novel POM-based LIBs anode materials with excellent lithium storage performance.     

The Core/Shell Structure P Doped MoS2@Ni3S2 Nanorods Array for High Current Density Hydrogen Evolution in Alkaline and Acidic Electrolyte

Electrocatalysis is the most promising strategy to generate clean energy H₂, and the development of catalysts with excellent hydrogen evolution reaction (HER) performance at high current density that can resist strong alkaline and acidic electrolyte environment is of great significance for practical industrial application. Therefore, a P doped MoS₂@Ni₃S₂ nanorods array (named P-NiMoS) was successfully synthesized through successive sulfuration and phosphorization. P-NiMoS presents a core/shell structure with a heterojunction between MoS₂ (shell) and Ni₃S₂ (core). Furthermore, the doping of P modulates the electronic structure of the P-NiMoS; the electrons transfer from the t_2g orbital of Ni element to the e_g empty orbital of Mo element through the Ni−S−Mo bond at the Ni₃S₂ and MoS₂ heterojunction, facilitating the hydrogen evolution reaction. As a result, P-NiMoS exhibits excellent HER activity; the overpotential is 290 mV at high current density of 250 mA cm⁻² in alkaline electrolyte, which is close to Pt/C (282 mV@250 mA cm⁻²), and P-NiMoS can stably evolve hydrogen for 48 h.     

Delocalized Isoelectronic Heterostructured FeCoOxSy Catalysts with Tunable Electron Density for Accelerated Sulfur Redox Kinetics in Li-S batteries

High interconversion energy barriers, depressive reaction kinetics of sulfur species, and sluggish Li⁺ transport inhibit the wide development of high-energy-density lithium sulfur (Li−S) batteries. Herein, differing from random mixture of selected catalysts, the composite catalyst with outer delocalized isoelectronic heterostructure (DIHC) is proposed and optimized, enhancing the catalytic efficiency for decreasing related energy barriers. As a proof-of-content, the FeCoO_xS_y composites with different degrees of sulfurization are fabricated by regulating atoms ratio between O and S. The relationship of catalytic efficiency and principal mechanism in DIHCs are deeply understood from electrochemical experiments to in situ/operando spectral spectroscopies i.e., Raman, XRD and UV/Vis. Consequently, the polysulfide conversion and Li₂S precipitation/dissolution experiments strongly demonstrate the volcano-like catalytic efficiency of various DIHCs. Furthermore, the FeCoO_xS_y-decorated cell delivers the high performance (1413 mAh g⁻¹ at 0.1 A g⁻¹). Under the low electrolyte/sulfur ratio, the high loading cell stabilizes the areal capacity of 6.67 mAh cm⁻² at 0.2 A g⁻¹. Impressively, even resting for about 17 days for possible polysulfide shuttling, the high-mass-loading FeCoO_xS_y-decorated cell stabilizes the same capacity, showing the practical application of the DIHCs in improving catalytic efficiency and reaching high electrochemical performance.     

Evolution of Stabilized 1T-MoS2 by Atomic-Interface Engineering of 2H-MoS2/Fe−Nx towards Enhanced Sodium Ion Storage

Metallic conductive 1T phase molybdenum sulfide (MoS₂) has been identified as promising anode for sodium ion (Na⁺) batteries, but its metastable feature makes it difficult to obtain and its restacking during the charge/discharge processing result in part capacity reversibility. Herein, a synergetic effect of atomic-interface engineering is employed for constructing 2H-MoS₂ layers assembled on single atomically dispersed Fe−N−C (SA Fe−N−C) anode material that boosts its reversible capacity. The work-function-driven-electron transfer occurs from SA Fe−N−C to 2H-MoS₂ via the Fe−S bonds, which enhances the adsorption of Na⁺ by 2H-MoS₂, and lays the foundation for the sodiation process. A phase transfer from 2H to 1T/2H MoS₂ with the ferromagnetic spin-polarization of SA Fe−N−C occurs during the sodiation/desodiation process, which significantly enhances the Na⁺ storage kinetics, and thus the 1T/2H MoS₂/SA Fe−N−C display a high electronic conductivity and a fast Na⁺ diffusion rate.     

Accelerated Multi-step Sulfur Redox Reactions in Lithium-Sulfur Batteries Enabled by Dual Defects in Metal-Organic Framework-based Catalysts

The sluggish sulfur redox kinetics and shuttle effect of lithium polysulfides (LiPSs) are recognized as the main obstacles to the practical applications of the lithium-sulfur (Li−S) batteries. Accelerated conversion by catalysis can mitigate these issues, leading to enhanced Li−S performance. However, a catalyst with single active site cannot simultaneously accelerate multiple LiPSs conversion. Herein, we developed a novel dual-defect (missing linker and missing cluster defects) metal–organic framework (MOF) as a new type of catalyst to achieve synergistic catalysis for the multi-step conversion reaction of LiPSs. Electrochemical tests and first-principle density functional theory (DFT) calculations revealed that different defects can realize targeted acceleration of stepwise reaction kinetics for LiPSs. Specifically, the missing linker defects can selectively accelerate the conversion of S₈→Li₂S₄, while the missing cluster defects can catalyze the reaction of Li₂S₄→Li₂S, so as to effectively inhibit the shuttle effect. Hence, the Li−S battery with an electrolyte to sulfur (E/S) ratio of 8.9 mL g⁻¹ delivers a capacity of 1087 mAh g⁻¹ at 0.2 C after 100 cycles. Even at high sulfur loading of 12.9 mg cm⁻² and E/S=3.9 mL g⁻¹, an areal capacity of 10.4 mAh cm⁻² for 45 cycles can still be obtained.     

Unraveling the Beneficial Microstructure Evolution in Pyrite for Boosted Lithium Storage Performance

Pyrite FeS₂ as a high-capacity electrode material for lithium-ion batteries (LIBs) is hindered by its unstable cycling performance owing to the large volume change and irreversible phase segregation from coarsening of Fe. Here, the beneficial microstructure evolution in MoS₂-modified FeS₂ is unraveled during the cycling process; the microstructure evolution is responsible for its significantly boosted lithium storage performance, making it suitable for use as an anode for LIBs. Specifically, the FeS₂/MoS₂ displays a long cycle life with a capacity retention of 116 % after 600 cycles at 0.5 A g⁻¹, which is the best among the reported FeS₂-based materials so far. A series of electrochemical tests and structural characterizations substantially revealed that the introduced MoS₂ in FeS₂ experiences an irreversible electrochemical reaction and thus the in situ formed metallic Mo could act as the conductive buffer layer to accelerate the dynamics of Li⁺ diffusion and electron transport. More importantly, it can guarantee the highly reversible conversion in lithiated FeS₂ by preventing Fe coarsening. This work provides a fundamental understanding and an effective strategy towards the microstructure evolution for boosting lithium storage performances for other metal sulfide-based materials.     

Unlocking the Interfacial Adsorption-Intercalation Pseudocapacitive Storage Limit to Enabling All-Climate,High Energy/Power Density and Durable Zn-Ion Batteries

Sluggish storage kinetics and insufficient performance are the major challenges that restrict the transition metal dichalcogenides (TMDs) applied for zinc ion storage, especially at the extreme temperature conditions. Herein, a multiscale interface structure-integrated modulation concept was presented, to unlock the omnidirectional storage kinetics-enhanced porous VSe_2−x⋅n H₂O host. Theory research indicated that the co-modulation of H₂O intercalation and selenium vacancy enables enhancing the interfacial zinc ion capture ability and decreasing the zinc ion diffusion barrier. Moreover, an interfacial adsorption-intercalation pseudocapacitive storage mechanism was uncovered. Such cathode displayed remarkable storage performance at the wide temperature range (−40–60 °C) in aqueous and solid electrolytes. In particular, it can retain a high specific capacity of 173 mAh g⁻¹ after 5000 cycles at 10 A g⁻¹, as well as a high energy density of 290 Wh kg⁻¹ and a power density of 15.8 kW kg⁻¹ at room temperature. Unexpectedly, a remarkably energy density of 465 Wh kg⁻¹ and power density of 21.26 kW kg⁻¹ at 60 °C also can be achieved, as well as 258 Wh kg⁻¹ and 10.8 kW kg⁻¹ at −20 °C. This work realizes a conceptual breakthrough for extending the interfacial storage limit of layered TMDs to construct all-climate high-performance Zn-ion batteries.     

Flexible yet Robust Framework of Tin(II) Oxide Carbodiimide for Reversible Lithium Storage

Metal-organic frameworks (MOFs) can become promising electrode materials for advanced lithium-ion batteries (LIBs), because their loosely packed porous structures may mitigate volume expansion and metal atom aggregation, which occur at the respective metal oxides. However, they suffer from poor electrical conductivity and irreversible structural degradation upon charge/discharge processes, which impede their practical utilization. Herein, we investigate MOF-like Sn₂O(CN₂) as a new electrode material. The conductive yet flexible [N=C=N] linkers are tilted between [Sn₄O] nodes and cross-linked into a porous quasi-layered structure. Such structure offers abundant channels for fast Li-ion transport and tolerance of enormous volume expansion. Notably, anisotropic [N=C=N]²⁻ arrays hardly migrate so that Sn⁰ nanodots are physically separated via robust [N=C=N]²⁻ framework during discharge, thereby effectively preventing the formation of large Sn islands. Owing to the structural advantage, the Sn₂O(CN₂) electrode exhibits an initial Coulombic efficiency as high as ∼80 %. With the addition of graphite as conductive supporter, the electrode provides 978 mAh g⁻¹ at 1.0 A g⁻¹ even after 300 cycles. Such MOF-like carbodiimides hold potential for the advanced electrodes in LIBs and other battery systems.     

Coated/Sandwiched rGO/CoSx Composites Derived from Metal–Organic Frameworks/GO as Advanced Anode Materials for Lithium‐Ion Batteries

Rational composite materials made from transition metal sulfides and reduced graphene oxide (rGO) are highly desirable for designing high‐performance lithium‐ion batteries (LIBs). Here, rGO‐coated or sandwiched CoS_x composites are fabricated through facile thermal sulfurization of metal–organic framework/GO precursors. By scrupulously changing the proportion of Co²⁺ and organic ligands and the solvent of the reaction system, we can tune the forms of GO as either a coating or a supporting layer. Upon testing as anode materials for LIBs, the as‐prepared CoS_x‐rGO‐CoS_x and rGO@CoS_x composites demonstrate brilliant electrochemical performances such as high initial specific capacities of 1248 and 1320 mA h g^?1, respectively, at a current density of 100 mA g^?1, and stable cycling abilities of 670 and 613 mA h g^?1, respectively, after 100 charge/discharge cycles, as well as superior rate capabilities. The excellent electrical conductivity and porous structure of the CoS_x/rGO composites can promote Li⁺ transfer and mitigate internal stress during the charge/discharge process, thus significantly improving the electrochemical performance of electrode materials.     

Toward Understanding the Enhanced Pseudocapacitive Storage in 3D SnS/MXene Architectures Enabled by Engineered Surface Reactions

The optimization of three-dimensional (3D) MXene-based electrodes with desired electrochemical performances is highly demanded. Here, a precursor-guided strategy is reported for fabricating the 3D SnS/MXene architecture with tiny SnS nanocrystals (≈5 nm in size) covalently decorated on the wrinkled Ti₃C₂T_x nanosheets through Ti−S bonds (denoted as SnS/Ti₃C₂T_x-O). The formation of Ti−S bonds between SnS and Ti₃C₂T_x was confirmed by extended X-ray absorption fine structure (EXAFS). Rather than bulky SnS plates decorated on Ti₃C₂T_x (SnS/Ti₃C₂T_x-H) by one-step hydrothermal sulfidation followed by post annealing, this SnS/Ti₃C₂T_x-O presents size-dependent structural and dynamic properties. The as-formed 3D hierarchical structure can provide short ion-diffusion pathways and electron transport distances because of the more accessible surface sites. In addition, benefiting from the tiny SnS nanocrystals that can effectively improve Na⁺ diffusion and suppress structural variation upon charge/discharge processes, the as-obtained SnS/Ti₃C₂T_x-O can generate pseudocapacitance-dominated storage behavior enabled by engineered surface reactions. As predicted, this electrode exhibits an enhanced Na storage capacity of 565 mAh g⁻¹ at 0.1 A g⁻¹ after 75 cycles, outperforming SnS/Ti₃C₂T_x-H (336 mAh g⁻¹), SnS (212 mAh g⁻¹), and Ti₃C₂T_x (104 mAh g⁻¹) electrodes.     

Construction of Rich Conductive Pathways from Bottom to Top: A Highly Efficient Charge-Transfer System Used in Durable Li/Na-Ion Batteries at −20 °C

The construction of potential electrode materials with wide temperature property for high-energy-density secondary batteries has attracted great interest in recent years. Herein, a hybrid electrode, consisting of a nitrogen-doped carbon/α-MnS/flake graphite composite (α-MnS@N-C/FG), is prepared through a post-sulfurization route. In the α-MnS@N-C/FG composite, α-MnS nanoparticles wrapped by the N−C layer are uniformly embedded onto FG, forming a novel nanofoam structure. The as-obtained α-MnS@N-C/FG shows excellent lithium/sodium storage performance, with a specific capacity of 712 mA h g⁻¹ in the 700th cycle at 1.0 A g⁻¹ or 186.4 mA h g⁻¹ in the 100th cycle at 100 mA g⁻¹ using lithium or sodium foil as the counter electrode, respectively. Moreover, even operated at −20 °C, the α-MnS@N-C/FG can still attain a high specific capacity of 350 mA h g⁻¹ after 50 cycles at 100mA g⁻¹ for LIBs. This exceptional electrochemical response is attributed to the synergetic effect of the smart design of a hybrid nanofoam structure, in which the FG skeleton and N-C coating layer can significantly enhance the conductivity of the whole electrode from bottom to top. Accordingly, the enhanced redox kinetics endow the electrode with pseudocapacitive-dominated electrochemical behavior, leading to fast electrode reactions and robust structural stability in the whole electrode.     

Coordination-Modulated Metal Tetrathiafulvalene Octacarboxylate Frameworks for High-Performance Lithium-Ion Battery Anodes

Modulation of the ligands and coordination environment of metal–organic frameworks (MOFs) has been an effective and relatively unexplored avenue for improving the anode performance of lithium-ion batteries (LIBs). In this study, three MOFs are synthesized, namely, M₄(o-TTFOB)(bpm)₂(H₂O)₂ (where M is Mn, Zn, and Cd; o-H₈TTFOB is ortho-tetrathiafulvalene octabenzoate; and bpm is 2,2′-bipyrimidine), based on a new ligand o-H₈TTFOB with two adjacent carboxylates on one phenyl, which allows us to establish the impact of metal coordination on the performance of these MOFs as anode materials in LIBs. Mn-o-TTFOB and Zn-o-TTFOB, with two more uncoordinated oxygen atoms from o-TTFOB⁸⁻, show higher reversible specific capacities of 1249 mAh g⁻¹ and 1288 mAh g⁻¹ under 200 mA g⁻¹ after full activation. In contrast, Cd-o-TTFOB shows a reversible capacity of 448 mAh g⁻¹ under the same condition due to the lack of uncoordinated oxygen atoms. Crystal structure analysis, cyclic voltammetry measurements of the half-cell configurations, and density functional theory calculations have been performed to explain the lithium storage mechanism, diffusion kinetics, and structure-function relationship. This study demonstrates the advantages of MOFs with high designability in the fabrication of LIBs.