Non-Interacting Ni and Fe Dual-Atom Pair Sites in N-Doped Carbon Catalysts for Efficient Concentrating Solar-Driven Photothermal CO2 Reduction

Solar-to-chemical energy conversion under weak solar irradiation is generally difficult to meet the heat demand of CO₂ reduction. Herein, a new concentrated solar-driven photothermal system coupling a dual-metal single-atom catalyst (DSAC) with adjacent Ni−N₄ and Fe−N₄ pair sites is designed for boosting gas-solid CO₂ reduction with H₂O under simulated solar irradiation, even under ambient sunlight. As expected, the (Ni, Fe)−N−C DSAC exhibits a superior photothermal catalytic performance for CO₂ reduction to CO (86.16 μmol g⁻¹ h⁻¹), CH₄ (135.35 μmol g⁻¹ h⁻¹) and CH₃OH (59.81 μmol g⁻¹ h⁻¹), which are equivalent to 1.70-fold, 1.27-fold and 1.23-fold higher than those of the Fe−N−C catalyst, respectively. Based on theoretical simulations, the Fermi level and d-band center of Fe atom is efficiently regulated in non-interacting Ni and Fe dual-atom pair sites with electronic interaction through electron orbital hybridization on (Ni, Fe)−N−C DSAC. Crucially, the distance between adjacent Ni and Fe atoms of the Ni−N−N−Fe configuration means that the additional Ni atom as a new active site contributes to the main *COOH and *HCO₃ dissociation to optimize the corresponding energy barriers in the reaction process, leading to specific dual reaction pathways (COOH and HCO₃ pathways) for solar-driven photothermal CO₂ reduction to initial CO production.     

A Highly Active N‐Heterocyclic Carbene Manganese(I) Complex for Selective Electrocatalytic CO2 Reduction to CO

We report here the first purely organometallic fac‐[Mn^I(CO)₃(bis‐^MeNHC)Br] complex with unprecedented activity for the selective electrocatalytic reduction of CO₂ to CO, exceeding 100 turnovers with excellent faradaic yields (η_CO≈95 %) in anhydrous CH₃CN. Under the same conditions, a maximum turnover frequency (TOF_max) of 2100 s^?1 was measured by cyclic voltammetry, which clearly exceeds the values reported for other manganese‐based catalysts. Moreover, the addition of water leads to the highest TOF_max value (ca. 320 000 s^?1) ever reported for a manganese‐based catalyst. A Mn^I tetracarbonyl intermediate was detected under catalytic conditions for the first time.     

Bipyridine‐Assisted Assembly of Au Nanoparticles on Cu Nanowires To Enhance the Electrochemical Reduction of CO2

We report a new strategy to prepare a composite catalyst for highly efficient electrochemical CO₂ reduction reaction (CO₂RR). The composite catalyst is made by anchoring Au nanoparticles on Cu nanowires via 4,4′‐bipyridine (bipy). The Au‐bipy‐Cu composite catalyzes the CO₂RR in 0.1 m KHCO₃ with a total Faradaic efficiency (FE) reaching 90.6 % at ?0.9 V to provide C‐products, among which CH₃CHO (25 % FE) dominates the liquid product (HCOO^?, CH₃CHO, and CH₃COO^?) distribution (75 %). The enhanced CO₂RR catalysis demonstrated by Au‐bipy‐Cu originates from its synergistic Au (CO₂ to CO) and Cu (CO to C‐products) catalysis which is further promoted by bipy. The Au‐bipy‐Cu composite represents a new catalyst system for effective CO₂RR conversion to C‐products.     

Thermally stable multicomponent manganese catalyst for the deep oxidation of methane to CO2

A thermally stable manganese oxide catalyst for the deep oxidation of lean CH₄ mixtures with air to CO₂ was developed and characterized. To prepare this catalyst, new approaches to the synthesis of polyoxide catalysts based on Mn modified with La, Ce, Ba, and Sr by supporting them from nitrate solutions onto alumina granules stabilized with 2% Ce were used. The catalyst gave the degree of CH₄ oxidation to CO₂ at a level of 90–98% at a CH₄ concentration of 0.2–4.0% in air (space velocity of 10 × 10³ h^?1; temperature of 973 K). The heating of a Mn-containing sample in air to 1373 K had no negative effect on the conversion of CH₄; an insignificant decrease in the catalyst activity (by ～10%) was observed only on heating above 1473 K. The degree of CH₄ oxidation to CO₂ depended only slightly on O₂ and CH₄ concentrations varied over the ranges 2–20 and 0.5–4.0%, respectively. With the use of physicochemical techniques (XRD analysis, BET, electronic diffuse-reflectance spectroscopy, TPD, TPR, and TPO), it was found that the catalyst underwent considerable phase transformations as the temperature was increased to 1473 K: Mn₂O₃ clusters, which occurred at 873 K, were partially converted into LaMnO₃ perovskites above 1173 K or LaMnAl₁₁O₁₉ hexaaluminates above 1273 K. Oxygen that is the constituent of the latter species participated in the oxidation of CH₄ to CO₂.     

Ligand-assisted Hydride Transfer: A Pivotal Step for CO2 Hydroboration Catalyzed by a Mononuclear Mn(I) PNP Complex

A mononuclear Mn(I) pincer complex [Mn(Ph₂PCH₂SiMe₂)₂NH(CO)₂Br] was disclosed to catalyze the pinacolborane (HBpin)-based CO₂ hydroboration reaction. Density functional calculations were conducted to reveal the reaction mechanism. The calculations showed that the reaction mechanism could be divided into four stages: (1) the addition of HBpin to the unsaturated catalyst C1 ; (2) the reduction of CO₂ to HCOOBpin; (3) the reduction of HCOOBpin to HCHO; (4) the reduction of HCHO to CH₃OBpin. The activation of HBpin is the ligand-assisted addition of HBpin to the unsaturated Mn(I)-N complex C1 generated by the elimination of HBr from the Mn(I) pincer catalyst. The sequential substrate reductions share a common mechanism, and every hydroboration commences with the nucleophilic attack of the Mn(I)-H to the electron-deficient carbon centers. The hydride transfer from Mn(I) to HCOOBpin was found to be the rate-limiting step for the whole catalytic reaction, with a total barrier of 27.0 kcal/mol, which fits well with the experimental observations at 90 °C. The reactivity trend of CO₂, HCOOBpin, HCHO, and CH₃OBpin was analyzed through both thermodynamic and kinetic analysis, in the following order, namely HCHO>CO₂>HCOOBpin≫CH₃OBpin. Importantly, the very high barrier for the reduction of CH₃OBpin to form CH₄ reconciles with the fact that methane was not observed in this catalytic reaction.     

Reactions of (CO2)2+ and (CO)2+ association ions

The reactons of (CO₂)₂⁺ and (CO)₂⁺ with various additives have been investigated using the NBS high-pressure photoionization mass spectrometer at total pressures of 0.4–1.0 torr of either CO₂ or CO. The additives include CH₄, CD₄, C₂H₂, O₂, H₂O, ^15,14N₂O, and CO in both CO₂ and ¹³CO₂. Second- and third-order rate coefficients based on an ambipolar diffusion model are reported for 25 separate reaction pairs at 295°K, as well as sequential cationic reaction mechanisms. An approximate value of 225 ± 3 kcal/mol (941 ± 13 kJ/mol) was derived for ΔH_f (CO)₂⁺ based on the kinetics observed in various CO-additive mixtures. Some projections regarding the utility of the data under other conditions are also included.     

Favoring CO Intermediate Stabilization and Protonation by Crown Ether for CO2 Electromethanation in Acidic Media

The large-scale deployment of CO₂ electroreduction is hampered by deficient carbon utilization in neutral and alkaline electrolytes due to CO₂ loss into (bi)carbonates. Switching to acidic media mitigates carbonation, but suffers from low product selectivity because of hydrogen evolution. Here we report a crown ether decoration strategy on a Cu catalyst to enhance carbon utilization and selectivity of CO₂ methanation under acidic conditions. Macrocyclic 18-Crown-6 is found to enrich potassium cations near the Cu electrode surface, simultaneously enhancing the interfacial electric field to stabilize the *CO intermediate and accelerate water dissociation to boost *CO protonation. Remarkably, the mixture of 18-Crown-6 and Cu nanoparticles affords a CH₄ Faradaic efficiency of 51.2 % and a single pass carbon efficiency of 43.0 % toward CO₂ electroreduction in electrolyte with pH=2. This study provides a facile strategy to promote CH₄ selectivity and carbon utilization by modifying Cu catalysts with supramolecules.     

Visible‐Light‐Driven CO2 Reduction by Mesoporous Carbon Nitride Modified with Polymeric Cobalt Phthalocyanine

The integration of molecular catalysts with low‐cost, solid light absorbers presents a promising strategy to construct catalysts for the generation of solar fuels. Here, we report a photocatalyst for CO₂ reduction that consists of a polymeric cobalt phthalocyanine catalyst (CoPPc) coupled with mesoporous carbon nitride (mpg‐CN_x) as the photosensitizer. This precious‐metal‐free hybrid catalyst selectively converts CO₂ to CO in organic solvents under UV/Vis light (AM 1.5G, 100 mW cm^?2, λ>300 nm) with a cobalt‐based turnover number of 90 for CO after 60 h. Notably, the photocatalyst retains 60 % CO evolution activity under visible light irradiation (λ>400 nm) and displays moderate water tolerance. The in situ polymerization of the phthalocyanine allows control of catalyst loading and is key for achieving photocatalytic CO₂ conversion.     

Functionalised Tris(pyrazolyl)methane Ligands and Re(CO)3 Complexes Thereof

The synthesis of new tripodal nitrogen ligands derived from tris(pyrazolyl)methane (Tpm^R, R = H, tBu, Ph in 3‐position) is described. After deprotonation of the parent tris(pyrazolyl)methane Tpm^R, the carbanion reacts readily with ethylene oxide to yield the 3,3,3‐tris(3′‐substituted pyrazolyl)propanol ligands[(3‐Rpz)₃CCH₂CH₂OH, R = H, tBu, Ph, 1a – c ]. These ligands can be easily derivatised at the alcohol function. Microwave‐assisted reactions of these ligands and [Re(CO)₅Br] yields the complex [( 1a )Re(CO)₃]Br ( 4 ) in the case of ligand 1a , whereas in the case of the substituted ligands 1b and 1c degradation was observed. The degradation products are identified as [(Hpz^R)₂Re(CO)₃Br] [R = tBu ( 7b ), Ph ( 7c )]. These complexes were also prepared directly from [Re(CO)₅Br] and the corresponding pyrazoles by microwave‐assisted synthesis. The Re(CO)₃ complexes 4 and [( 1a )Re(CO)₃]OTf ( 5 ) are water‐soluble. The structures of 5· H₂O and [{(pz)₃CCH₂CH₃}Re(CO)₃]OTf · 1.5H₂O · ¹/₂CH₃CN ( 6· 1.5H₂O · ¹/₂CH₃CN) as well as the structure of 7b have been elucidated by X‐ray crystallography.     

Temperature-programmed desorption/pulse surface reaction (tpd/tpsr) studies of CH4, C2H6, C2H4, and CO over a cobalt/MWNTs catalyst

Summary Temperature-programmed desorption (TPD) of CH₄, C₂H₆, C₂H₄, and CO and temperature-programmed pulse surface reactions (TPSR) of CH₄, C₂H₆, C₂H₄, CO, and CO/H₂ over a Co/MWNTs catalyst have been investigated. The TPD results indicated that CH₄ and C₂H₆ mainly exist as physisorbed species on the Co/MWNTs catalyst surface, whilst C₂H₄ and CO exist as both physisorbed and chemisorbed species. The TPSR results indicated that CH₄ and C₂H₆ do not undergo reaction between room temperature and 450^oC. Pulsed C₂H₄ can be transformed into CH₄ at 400 ^oC whilst pulsed CO can be transformed into CO₂ at 100 or 150^oC. In gaseous mixtures of CO and H₂ containing excess CO, the products of pulsed reaction were CH₃CHO and CH₃OH. When the ratio of CO and H₂ was 1:2, pulsed CO and H₂ were transformed into CH₃CHO, CH₃OH and CH₄. In H₂ gas flow, pulsed CO was transformed into a mixture of CH₃CHO and CH₄ between 200 and 250^oC and was transformed into CH₄ only above 250^oC.     

Photocatalytic reduction of CO2 with H2O on TiO2 and Cu/TiO2 catalysts

Photoinduced reduction of CO₂ by H₂O to produce CH₄ and CH₃OH has been investigated on wellcharacterized standard TiO₂ catalysts and on a Cu²⁺ loaded TiO₂ catalyst. The efficiency of this photoreaction depends strongly on the kind of catalyst and the ratio of H₂O to CO₂. Anatase TiO₂, which has a large band gap and numerous surface OH groups, shows high efficiency for photocatalytic CH₄ formation. Photogenerated Ti³⁺ ions, H and CH₃ radicals are observed as reactive intermediates, by ESR at 77 K. Cu-loading of the small, powdered TiO₂ catalyst (Cu/TiO₂) brings about additional formation of CH₃OH. XPS studies suggest that Cu⁺ plays a significant role in CH₃OH formation.     

Experiments and Calculations on Photoionization and Dissociative Photoionization of CH2CO

The dissociative photoionization of molecular‐beam cooled CH₂CO in a region of ?10–20 eV was investigated with photoionization mass spectrometry using a synchrotron radiation as the light source. Photoionization efficiency curves of CH₂CO⁺ and of observed fragment ions CH₂⁺, CHCO⁺, HCO⁺, C₂O⁺, CO⁺, and C₂H₂⁺ were measured to determine their appearance energies. Relative branching ratios as a function of photon energy were determined. Energies for formation of these observed fragment ions and their neutral counterparts upon ionization of CH₂CO are computed with the Gaussian‐3 method. Dissociative photoionization channels associated with six observed fragment ions are proposed based on comparison of determined appearance energies and predicted energies. The principal dissociative processes are direct breaking of C=C and C‐H bonds to form CH₂⁺ + CO and CHCO⁺ + H, respectively; at greater energies, dissociation involving H migration takes place.     

A First-Principles Study of CO2 Hydrogenation on a Niobium-Terminated NbC (111) Surface

As promising materials for the reduction of greenhouse gases, transition-metal carbides, which are highly active in the hydrogenation of CO₂, are mainly considered. In this regard, the reaction mechanism of CO₂ hydrogenation to useful products on the Nb-terminated NbC (111) surface is investigated by applying density functional theory calculations. The computational results display that the formation of CH₄, CH₃OH, and CO are more favored than other compounds, where CH₄ is the dominant product. In addition, the findings from reaction energies reveal that the preferred mechanism for CO₂ hydrogenation is thorough HCOOH^*, where the largest exothermic reaction energy releases during the HCOOH^* dissociation reaction (2.004 eV). The preferred mechanism of CO₂ hydrogenation towards CH₄ production is CO₂^*→t,c-COOH^*→HCOOH^*→HCO^*→CH₂O^*→CH₂OH^*→CH₂^*→CH₃^*→CH₄^*, where CO₂^*→t,c-COOH^*→HCOOH^*→HCO^*→CH₂O^*→CH₂OH^*→CH₃OH^* and CO₂^*→t,c-COOH^*→CO^* are also found as the favored mechanisms for CH₃OH and CO productions thermodynamically, respectively. During the mentioned mechanisms, the hydrogenation of CH₂O^* to CH₂OH^* has the largest endothermic reaction energy of 1.344 eV.     

CO2预处理操作条件对Ni-Co双金属催化剂性能与结构的影响

与传统H₂预处理方法相比,新型H₂+CO₂预处理方法（HCD）能显著提升Ni-Co双金属催化剂的沼气重整活性及抗积碳性能. 考察了HCD预处理操作条件对催化剂性能与结构的影响. 较好的HCD预处理操作条件是在催化剂经H₂处理之后,再用175-200 mL·min^-1的原料气CH₄/CO₂（比例为0：10）在780-800 ℃下还原0.5-1h. 在优化预处理操作条件下对催化剂进行了511 h的耐久性考察,并运用X射线衍射（XRD）、热重-差示扫描量热（TG-DSC）、透射电子显微镜（TEM）等手段对耐久性测试后的催化剂进行了表征. 在511 h 的稳定性实验内,CH₄、CO₂转化率,H₂、CO选择性及H₂/CO体积比分别高达96%、97%,98%、99%及0.98. 催化剂在测试期间的平均积碳速率仅为0.2 mg·g^-1·h^-1. 在该预处理操作参数下,催化剂拥有最好的综合性能和良好的耐久性.     

Achieving simultaneous Cu particles anchoring in meso-porous TiO2 nanofabrication for enhancing photo-catalytic CO2 reduction through rapid charge separation

A facile solvo-thermal approach was successfully employed to prepare titanium oxide（TiO₂） nanoaggregates with simultaneous copper particles anchoring.The as-synthesized composite could convert CO₂ into CH₄ and CO products under simulated solar irradiation.The impact of copper loading amounts on the photo-reduction capability was evaluated.It was found proper amount of Cu loading could enhance the activity of CO₂ photo-reduction.As a result,the optimal ...     

Photo-Induced Switching of CO2 Hydrogenation Pathway towards CH3OH Production over Pt@UiO-66-NH2(Co)

It is highly desired to achieve controllable product selectivity in CO₂ hydrogenation. Herein, we report light-induced switching of reaction pathways of CO₂ hydrogenation towards CH₃OH production over actomically dispersed Co decorated Pt@UiO-66-NH₂. CO, being the main product in the reverse water gas shift (RWGS) pathway under thermocatalysis condition, is switched to CH₃OH via the formate pathway with the assistance of light irradiation. Impressively, the space-time yield of CH₃OH in photo-assisted thermocatalysis (1916.3 μmol g_cat⁻¹ h⁻¹) is about 7.8 times higher than that without light at 240 °C and 1.5 MPa. Mechanism investigation indicates that upon light irradiation, excited UiO-66-NH₂ can transfer electrons to Pt nanoparticles and Co sites, which can efficiently catalyze the critical elementary steps (i.e., CO₂-to-*HCOO conversion), thus suppressing the RWGS pathway to achieve a high CH₃OH selectivity.     

Enhancing CO2 Electroreduction to Methane with a Cobalt Phthalocyanine and Zinc–Nitrogen–Carbon Tandem Catalyst

Developing copper-free catalysts for CO₂ conversion into hydrocarbons and oxygenates is highly desirable for electrochemical CO₂ reduction reaction (CO₂RR). Herein, we report a cobalt phthalocyanine (CoPc) and zinc–nitrogen–carbon (Zn-N-C) tandem catalyst for CO₂RR to CH₄. This tandem catalyst shows a more than 100 times enhancement of the CH₄/CO production rate ratio compared with CoPc or Zn-N-C alone. Density functional theory (DFT) calculations and electrochemical CO reduction reaction results suggest that CO₂ is first reduced into CO over CoPc and then CO diffuses onto Zn-N-C for further conversion into CH₄ over Zn-N₄ site, decoupling complicated CO₂RR pathway on single active site into a two-step tandem reaction. Moreover, mechanistic analysis indicates that CoPc not only generates CO but also enhances the availability of *H over adjacent N sites in Zn-N₄, which is the key to achieve the high CH₄ production rate and understand the intriguing electrocatalytic behavior which is distinctive to copper-based tandem catalysts.     

Infrared multiphotonic excitation and the cell geometry problem: case of CH3Br and SF6

Gas samples of CH₃Br and SF₆ were irradiated by a focused CO₂ laser beam. Three cells with different sizes were used. With CH₃Br, fluorescence and decomposition were observed which depended upon the cell's dimensions. With SF₆ we always obtained decomposition and enrichment in ³⁴S by irradiation with the P(16) line.     

球磨时间对浆态床CO甲烷化Ni-Al_2O_3催化剂性能的影响

结合行星式球磨机,采用低温固相法制备Ni-Al_2O_3催化剂,考察了球磨时间对Ni-Al_2O_3催化剂晶相结构(XRD)、还原特征(H2-TPR)、孔道结构(BET)、粒径分布(PSD)、表面形貌(SEM)和浆态床CO甲烷化性能的影响.结果表明,球磨时间为60 min,催化剂(CT-60)平均粒径最小,为141 nm;比表面积最大,为329 m2/g.随球磨时间延长,Ni-Al_2O_3催化剂的甲烷化性能(CO转化率、CH_4选择性和CH_4收率)均先增加后减少.其中,球磨时间为60 min制备的催化剂(CT-60)甲烷化性能最佳,其CO转化率、CH_4选择性和CH_4收率分别达87.9%、8 6.8%和74.3%.结合催化剂表征可知,CT-60优异的性能与其具有较小的颗粒尺寸(141 nm)和较大的比表面积(329 m2·g-1)有很大的关联.即,催化剂颗粒尺寸越小,比表面积越大,其性能越好.     

Cu Atomic Chain Supported on Graphene Nanoribbon for Effective Conversion of CO2 to Ethanol

Cu catalysts are well-known for their good performance in CO₂ conversion. Compared to CO and CH₄ production, C₂ products have higher volumetric energy densities and are more valuable in industrial applications. In this work, we screened the catalytic ability of C₂ production on several 1D Cu atomic chain structures and find that Cu edge-decorated zigzag graphene nanoribbons (Cu−ZGNR) are capable of catalyzing CO₂ conversion to ethanol, and CH₃CH₂OH is the main C₂ product with a maximum free energy change of 0.60 eV. The planar tetracoordinate carbon structures in Cu-ZGNR provide unique chemical bonding features for catalytic reaction on the Cu atoms. Detailed mechanism analyses with transition states search show that CO* dimerization is favored against CHO* formation in the reaction. By adjusting the CO* coverage, the selectivity of the C₂ product can be enhanced owing to less pronounced steric effects for COCHO*, which is feasible under experimental conditions. This study expands the catalyst family for C₂ products from CO₂ based on nano carbon structures with new features.