Synthesis,Characterization, Thermal Analyses,and Spectroscopic Properties of Novel Naphthyl-Functionalized Imidazolium Ionic Liquids

A series of novel ionic liquids based on naphthyl-functionalized imidazolium cation have been prepared. Their structure was characterized by NMR. The thermal stabilities of the prepared liquids were studied by thermal gravimetric analysis. The new ionic liquids containing NTf^-₂ anion display significantly higher thermal stabilities (>400°C). Anion exchange to PF^-₆, BF^-₄, and Br^– decreases the thermal stabilities of such ionic liquids. Fluorescence and UV–Vis absorption spectroscopy were used to study the spectroscopic properties of the ionic liquids. Compared with common ionic liquids, the described ionic liquids provide robust fluorescence properties and remarkably increased UV–Vis absorption. This research may enrich the field of functionalized ionic liquids and provide a platform for extension of ionic liquid applications.     

Synthesis and characterization of novel chiral imidazolium and pyridinium ionic liquids derived from tartaric acid and 2-oxazolidinone

Abstract

Novel chiral imidazolium and pyridinium ionic liquids based on tartaric acid and 2-oxazolidinone were designed. Symmetrical dicationic ionic liquids based on tartaric acid have been synthesized and characterized. These chiral ionic liquids were designed by employing very short and simple methods. Incorporation of alkyl halide over tartaric acid and 2-oxazolidinone is an important step. N-methyl imidazole and pyridine were used for preparation of quaternary salts. These ionic liquids have been evaluated for the asymmetric sulfide oxidation. Chiral ionic liquids based on tartaric acid showed superior chiral inducing property as compare to 2-oxazolidinone based chiral ionic liquids.     

Probing the Reorganization of Ionic Liquids’ Structure Induced by CO2 Sorption

The sorption of CO₂ is often used to modify the macroscopic properties of liquids and solids. In the particular case of ionic liquids, different from molecular liquids, the sorption of CO₂ may not induce volume expansions due to the strong Coulombic interactions between the ions of the fluid. However, a considerable viscosity decrease has been systematically observed. In order to understand the mechanisms of properties modifications in ionic fluids, herein we used Raman spectroscopy to probe the effect of CO₂ on the structure of ionic liquids. It is shown that CO₂ perturbs the electrostatic interactions between cations and anions, thus inducing a change in the polar domain of ionic liquids. It is observed that ionic liquids having bulkier ions are more prone to be perturbed by CO₂ in comparison to ionic liquids having smaller ions. These results reveal new means of controlling the electrostatic forces between the ions and contributes to the mechanistic understanding of the modification of the macroscopic properties of ionic liquids by CO₂ sorption.     

Spectroscopic evaluation of chiral and achiral fluorescent ionic liquids

In this study, spectroscopic investigation of chiral and achiral room temperature ionic liquids is achieved. New ionic liquids were prepared via metathesis, accomplished by the reaction of either L-phenylalanine ethyl ester hydrochloride, chlorpromazine hydrochloride or 1,10-Phenanthroline monohydrate hydrochloride with lithium bis(trifluoromethane) sulfonamide in water. The resulting ionic liquids were produced in high yield and purity. The results obtained by use of ¹H NMR and IR experiments were in very good agreement with the chemical structures of the synthesized ionic liquids. In addition, the results of thermal gravimetric analysis suggested that these ionic liquids have good thermal stability. UV-Vis and fluorescence spectroscopy measurements indicated that these ionic liquids are strongly optically absorbent and fluorescent. Lastly, time-based fluorescence steady-state measurements demonstrated the high photostability of these ionic liquids.      

核磁共振波谱技术在室温离子液体研究中的应用*

室温离子液体作为一种绿色溶剂和功能材料,越来越引起人们的重视,其研究手段也越来越多。本文着重概述了核磁共振方法在测定离子液体的结构、纯度及性质,研究离子液体阴阳离子间的相互作用、离子液体与其他化合物的相互作用、离子液体及其在混合体系中的动力学特征、离子液体在溶液中的聚集行为,以及测定离子液体的热力学参数中的应用。     

Convenient and Efficient Method for the Synthesis of Phthalocyanines and Metallophthalocyanines in Task-Specific 2-Hydroxyethyl Ionic Liquids

Tetramerization of substituted phthalonitriles in task-specific 2-hydroxylethyl-based imidazolium and ammonium ionic liquids at 100 °C gave corresponding phthalocyanines in moderate yield. Further the reaction of substituted phthalonitriles in the presence of transition-metal salts in ionic liquids gave the corresponding metallophthalocyanines. The 2-hydroxylethyl ammonium ionic liquids gave better yields of phthalocyanines than 2-hydroxylethyl imidazolium and nonhydroxyl functionalized ionic liquids. The isolation and separations of different phthalocyanines were accomplished by silica-gel column chromatography, and products were characterized by various spectroscopic techniques.     

离子液体酸性的红外光谱探针法研究

以吡啶和乙腈分子为探针, 使用红外光谱法研究了常用室温离子液体的酸性. 采用吡啶为探针分子时, 出现的～1450 cm^－1、～1540 cm^－1吸收带可以分别指示离子液体的Lewis、Brønsted酸性；采用乙腈为探针分子时, ～2253 cm^－1的C≡N伸缩振动向高波数移动并伴有新峰的出现，可以指示离子液体的Lewis酸性。可以通过比较吡啶探针～1450 cm^－1吸收带的峰位置对离子液体的Lewis酸强度进行排序，并且可以用乙腈探针更灵敏地区分出不同离子液体的Lewis酸的强度，使用该方法研究了离子液体的结构对其Brønsted / Lewis酸性的影响。     

IR125和HDITCP在不同烷基链长阳离子离子液体中的光异构化动力学

利用稳态吸收和荧光光谱以及时间相关单光子计数实验,分别测得近红外花菁分子IR125和HDITCP在不同烷基链长阳离子离子液体中的荧光量子产率和荧光寿命,并通过计算获得了它们各自在相应离子液体中的光异构化速率.发现IR125和HDITCP在不同离子液体中的光异构化速率没有随着离子液体粘度的增大而产生明显变化.与IR125和HDITCP在与离子液体具有相同粘度的甘油水溶液中的光异构化速率对比,发现IR125和HDITCP在离子液体中的光异构化能垒比它们在甘油水溶液中的光异构化能垒增大约2 kJ?mol-1,这表明在高粘度的离子液体中IR125或HDITCP与离子液体之间特殊的相互作用会阻碍它们各自的光异构化过程.     

二苯醚烷基化反应中酸性离子液体的循环使用

使用酸性离子液体催化二苯醚与十二烯烷基化反应,考察了离子液体的失活原因,提出了循环使用离子液体的解决办法.在二苯醚与十二烯烷基化反应中, Lewis酸性离子液体不能多次循环使用的原因是离子液体与二苯醚相互作用导致具有催化活性的Al2Cl72－分解、流失.改变离子液体的阳离子不能从本质上解决其与二苯醚间的相互作用.适时补加损失量的AlCl3使离子液体的Lewis酸性得以恢复,可以解决体系中酸性离子液体循环使用问题,循环使用8次后产物产率仍保持90％左右.     

Porous ionic liquids: synthesis and application

Solidification of fluidic ionic liquids into porous materials yields porous ionic networks that combine the unique characteristics of ionic liquids with the common features of polymers and porous materials. This minireview reports the most recent advances in the design of porous ionic liquids. A summary of the synthesis of ordered and disordered porous ionic liquid-based nanoparticles or membranes with or without templates is provided, together with the new concept of room temperature porous ionic liquids. As a versatile platform for functional materials, porous ionic liquids have shown widespread applications in catalysis, adsorption, sensing, actuation, etc. This new research direction towards ionic liquids chemistry is still in its early stages but has great potential.     

Improved preparation and use of room-temperature ionic liquids in lipase-catalyzed enantio- and regioselective acylations.

Polar organic solvents such as methanol or N-methylformamide inactivate lipases. Although ionic liquids such as 3-alkyl-1-methylimidazolium tetrafluoroborates have polarities similar to these polar organic solvents, they do not inactivate lipases. To get reliable lipase-catalyzed reactions in ionic liquids, we modified their preparation by adding a wash with aqueous sodium carbonate. Lipase-catalyzed reactions that previously did not occur in untreated ionic liquids now occur at rates comparable to those in nonpolar organic solvents such as toluene. Acetylation of 1-phenylethanol catalyzed by lipase from Pseudomonas cepacia (PCL) was as fast and as enantioselective in ionic liquids as in toluene. Ionic liquids permit reactions in a more polar solvent than previously possible. Acetylation of glucose catalyzed by lipase B from Candida antarctica (CAL-B) was more regioselective in ionic liquids because glucose is up to one hundred times more soluble in ionic liquids. Acetylation of insoluble glucose in organic solvents yielded the more soluble 6-O-acetyl glucose, which underwent further acetylation to give 3,6-O-diacetyl glucose (2-3:1 mixture). However, acetylation of glucose in ionic liquids yielded only 6-O-acetyl glucose (>13:1 and up to >50:1).     

Partition coefficients of organic compounds in new imidazolium based ionic liquids using inverse gas chromatography

Partition coefficients of organic compounds in four ionic liquids: 1-ethanol-3-methylimidazolium tetrafluoroborate, 1-ethanol-3-methylimidazolium hexafluorophosphate, 1,3-dimethylimidazolium dimethylphosphate and 1-ethyl-3-methylimidazolium diethylphosphate were measured using inverse gas chromatography from 303.3 to 332.55 K. The influence of gas–liquid and gas–solid interfacial adsorption of different solutes on ionic liquids was also studied. Most of the polar solutes were retained largely by partition while light hydrocarbons were retained predominantly by interfacial adsorption on the ionic liquids studied in this work. The solvation characteristics of the ionic liquids were evaluated using the Abraham solvation parameter model.     

Comparable Ionicity of the Solutions of Aprotic and Protic Ionic Liquids by Anion Substitution

Temperature dependent molar conductances and fluidities of bisulfate and ethyl sulfate anion-based ionic liquids were measured. The extent of dissociation of the ionic liquids was estimated from the Walden plot in term of ionicity. The ionicity mainly depends on the magnitude of Coulombic forces, altered by the anion’s Lewis basicity. Aqueous solutions of aprotic ionic liquids, in general, possesses ionicity in the range of ≈70–99%. This article reveals that the substitution of the anion by bisulfate and ethylsulfate reduces the ionicity of aqueous solution of these ionic liquids to the range of 10–37%. This is very close to that exhibited by some of the protic ionic liquids and phosphonium based ionic liquids with sweetner anions. The concentration dependent molar conductance of these ionic liquids has been fitted to Mahiuddin and Ismail’s equation. To our surprise, the molar conductances of bisulfate-based aprotic ionic liquids are remarkably high, even though these ionic liquids possess lower ionicity.     

Synthesis and Characterization of Ammonium-, Pyridinium-, and Pyrrolidinium-Based Sulfonamido Functionalized Ionic Liquids

New homologous ammonium-, pyridinium-, and pyrrolidinium-based sulfonamido functionalized ionic liquids have been synthesized in two steps using monoethanolamine, methanesulfonyl chloride, and tosyl chloride as precursors with ethanol as solvent. Attempts to synthesize dual amino functionalized ionic liquid containing both a primary and a secondary amine group in the same ionic liquid are also reported. All functionalized ionic liquids were characterized by ¹H and ¹³C NMR. Melting point and thermal stability of the functionalized ionic liquids were measured by differential scanning calorimetry and thermogravimetric analysis.     

Polyaddition of bifunctional cyclic carbonate with diamine in ionic liquids: In situ ion composite formation and simple separation of ionic liquid

Polyaddition of bifunctional cyclic carbonates and diamines in ionic liquids proceeded smoothly to afford polyurethanes having hydroxyl groups in the side chain (i.e., poly(hydroxyurethane)). The reaction mixtures separated into ionic liquids and ionic composites consisting of poly(hydroxyurethane) and ionic liquids. The ionic composites originated from the interactions between hydroxyl groups in the side chains and the ionic liquids, confirmed by IR spectroscopic analysis. When the polyaddition was conducted in the mixed solvent consists of water and N‐n‐butylimidazolium hexafluorophosphate. After the reaction, the polymer and the ionic liquid could be separated easily. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4629–4635, 2009     

高分子离子液体的研究进展

综述了高分子离子液体最新的研究进展。作为离子液体的载体材料主要有两大类 :一是无机高分子 ,离子液体中的阴离子或阳离子通过与无机高分子材料表面的基团键合形成含离子液体结构的高分子 ;二是有机高分子 ,在有机高分子上引入离子液体合成聚合物电解质 ,并介绍了其在催化、导电材料方面的应用前景     

色谱分析中离子液体的应用及其测定

离子液体作为一种优良的溶剂越来越受到人们的关注。由于离子液体特殊的物理化学性质使其在色谱分析中也得到了较广泛的应用。本文综述了离子液体在气相色谱、高效液相色谱和毛细管电泳中的应用,其中包括离子液体作为气相色谱的固定相、高效液相色谱的固定相及流动相添加剂和毛细管电泳的电解质添加剂等,并对离子液体的色谱分离检测作了详细介绍。     

Solvation and rotational dynamics of coumarin 153 in ionic liquids: comparisons to conventional solvents

Steady-state and time-resolved emission spectroscopy with 25 ps resolution are used to measure equilibrium and dynamic aspects of the solvation of coumarin 153 (C153) in a diverse collection of 21 room-temperature ionic liquids. The ionic liquids studied here include several phosphonium and imidazolium liquids previously reported as well as 12 new ionic liquids that incorporate two homologous series of ammonium and pyrrolidinium cations. Steady-state absorption and emission spectra are used to extract solvation free energies and reorganization energies associated with the S0 <--> S1 transition of C153. These quantities, especially the solvation free energy, vary relatively little in ionic liquids compared to conventional solvents. Some correlation is found between these quantities and the mean separation between ions (or molar volume). Time-resolved anisotropies are used to observe solute rotation. Rotation times measured in ionic liquids correlate with solvent viscosity in much the same way that they do in conventional polar solvents. No special frictional coupling between the C153 and the ionic liquid solvents is indicated by these times. But, in contrast to what is observed in most low-viscosity conventional solvents, rotational correlation functions in ionic liquids are nonexponential. Time-resolved Stokes shift measurements are used to characterize solvation dynamics. The solvation response functions in ionic liquids are also nonexponential and can be reasonably represented by stretched-exponential functions of time. The solvation times observed are correlated with the solvent viscosity, and the much slower solvation in ionic liquids compared to dipolar solvents can be attributed to their much larger viscosities. Solvation times of the majority of ionic liquids studied appear to follow a single correlation with solvent viscosity. Only liquids incorporating the largest phosphonium cation appear to follow a distinctly different correlation.     

Influence of the anion on the surface tension of 1-ethyl-3-methylimidazolium-based ionic liquids

The air–liquid interfacial tensions of eight ionic liquids, from (298 to 343) K, are presented in this work. The studied ionic liquids are formed by the fixed 1-ethyl-3-methylimidazolium cation combined with the anions acetate, dicyanamide, dimethylphosphate, methylphosphonate, methanesulfonate, thiocyanate, tosylate, and trifluoromethanesulfonate. The selected ionic liquids allowed a comprehensive study through the influence of the anion nature on the surface tension and on their surface ordering. A slight dependence of the surface tension with the ionic liquid molar volume was identified. The surface thermodynamic functions are mainly controlled by the anion which constitutes a given ionic liquid. The hypothetical critical temperatures of all ionic liquids were estimated by means of the Eötvos and Guggenheim correlations and are presented.     

A group contribution method to estimate the densities of ionic liquids

Densities of ionic liquids at different temperature and pressure were collected from 84 references. The collection contains 7381 data points derived from 123 pure ionic liquids and 13 kinds of binary ionic liquids mixtures. In terms of the collected database, a group contribution method based on 51 groups was used to predict the densities of ionic liquids. In group partition, the effect of interaction among several substitutes on the same center was considered. The same structure in different substitutes may have different group values. According to the estimation of pure ionic liquids’ densities, the results show that the average relative error is 0.88% and the standard deviation (S) is 0.0181. Using the set of group values three pure ionic liquids densities were predicted, the average relative error is 0.27% and the S is 0.0048. For ionic liquid mixtures, they are thought considered as idea mixtures, so the group contribution method was used to estimate their densities and the average relative error is 1.22% with S is 0.0607. And the method can also be used to estimate the densities of MCl_x type ionic liquids which are produced by mixing an ionic liquid with a Cl^? anion and a kind of metal chloride.