An Efficient and Stable MoS2/Zn0.5Cd0.5S Nanocatalyst for Photocatalytic Hydrogen Evolution

Photocatalytic hydrogen evolution by water splitting is highly important for the application of hydrogen energy and the replacement of fossil fuel by solar energy, which needs the development of efficient catalysts with long-term catalytic stability under light irradiation in aqueous solution. Herein, Zn_0.5Cd_0.5S solid solution was synthesized by a metal–organic framework-templated strategy and then loaded with MoS₂ by a hydrothermal method to fabricate a MoS₂/Zn_0.5Cd_0.5S heterojunction for photocatalytic hydrogen evolution. The composition of MoS₂/Zn_0.5Cd_0.5S was fine-tuned to obtain the optimized 5 wt % MoS₂/Zn_0.5Cd_0.5S heterojunction, which showed a superior hydrogen evolution rate of 23.80 mmol h⁻¹ g⁻¹ and steady photocatalytic stability over 25 h. The photocatalytic performance is due to the appropriate composition and the formation of an intimate interface between MoS₂ and Zn_0.5Cd_0.5S, which endows the photocatalyst with high light-harvesting ability and effective separation of photogenerated carriers.     

Rapid Charge Transfer Endowed by Interfacial Ni-O Bonding in S-scheme Heterojunction for Efficient Photocatalytic H2 and Imine Production

Cooperative coupling of H₂ evolution with oxidative organic synthesis is promising in avoiding the use of sacrificial agents and producing hydrogen energy with value-added chemicals simultaneously. Nonetheless, the photocatalytic activity is obstructed by sluggish electron-hole separation and limited redox potentials. Herein, Ni-doped Zn_0.2Cd_0.8S quantum dots are chosen after screening by DFT simulation to couple with TiO₂ microspheres, forming a step-scheme heterojunction. The Ni-doped configuration tunes the highly active S site for augmented H₂ evolution, and the interfacial Ni−O bonds provide fast channels at the atomic level to lower the energy barrier for charge transfer. Also, DFT calculations reveal an enhanced built-in electric field in the heterojunction for superior charge migration and separation. Kinetic analysis by femtosecond transient absorption spectra demonstrates that expedited charge migration with electrons first transfer to Ni²⁺ and then to S sites. Therefore, the designed catalyst delivers drastically elevated H₂ yield (4.55 mmol g⁻¹ h⁻¹) and N-benzylidenebenzylamine production rate (3.35 mmol g⁻¹ h⁻¹). This work provides atomic-scale insights into the coordinated modulation of active sites and built-in electric fields in step-scheme heterojunction for ameliorative photocatalytic performance.     

An Efficient,Visible‐Light‐Driven,Hydrogen Evolution Catalyst NiS/ZnxCd1−xS Nanocrystal Derived from a Metal–Organic Framework

Photocatalytic water splitting for hydrogen production using sustainable sunlight is a promising alternative to industrial hydrogen production. However, the scarcity of highly active, recyclable, inexpensive photocatalysts impedes the development of photocatalytic hydrogen evolution reaction (HER) schemes. Herein, a metal–organic framework (MOF)‐template strategy was developed to prepare non‐noble metal co‐catalyst/solid solution heterojunction NiS/Zn_xCd_1−xS with superior photocatalytic HER activity. By adjusting the doping metal concentration in MOFs, the chemical compositions and band gaps of the heterojunctions can be fine‐tuned, and the light absorption capacity and photocatalytic activity were further optimized. NiS/Zn_0.5Cd_0.5S exhibits an optimal HER rate of 16.78 mmol g⁻¹ h⁻¹ and high stability and recyclability under visible‐light irradiation (λ>420 nm). Detailed characterizations and in‐depth DFT calculations reveal the relationship between the heterojunction and photocatalytic activity and confirm the importance of NiS in accelerating the water dissociation kinetics, which is a crucial factor for photocatalytic HER.     

Isolated Electron Trap-Induced Charge Accumulation for Efficient Photocatalytic Hydrogen Production

The solar-driven evolution of hydrogen from water using particulate photocatalysts is considered one of the most economical and promising protocols for achieving a stable supply of renewable energy. However, the efficiency of photocatalytic water splitting is far from satisfactory due to the sluggish electron-hole pair separation kinetics. Herein, isolated Mo atoms in a high oxidation state have been incorporated into the lattice of Cd_0.5Zn_0.5S (CZS@Mo) nanorods, which exhibit photocatalytic hydrogen evolution rate of 11.32 mmol g⁻¹ h⁻¹ (226.4 μmol h⁻¹; catalyst dosage 20 mg). Experimental and theoretical simulation results imply that the highly oxidized Mo species lead to mobile-charge imbalances in CZS and induce the directional photogenerated electrons transfer, resulting in effectively inhibited electron-hole recombination and greatly enhanced photocatalytic efficiency.     

An Efficient,Visible‐Light‐Driven,Hydrogen Evolution Catalyst NiS/ZnxCd1−xS Nanocrystal Derived from a Metal–Organic Framework

Photocatalytic water splitting for hydrogen production using sustainable sunlight is a promising alternative to industrial hydrogen production. However, the scarcity of highly active, recyclable, inexpensive photocatalysts impedes the development of photocatalytic hydrogen evolution reaction (HER) schemes. Herein, a metal–organic framework (MOF)‐template strategy was developed to prepare non‐noble metal co‐catalyst/solid solution heterojunction NiS/Zn_xCd_1?xS with superior photocatalytic HER activity. By adjusting the doping metal concentration in MOFs, the chemical compositions and band gaps of the heterojunctions can be fine‐tuned, and the light absorption capacity and photocatalytic activity were further optimized. NiS/Zn_0.5Cd_0.5S exhibits an optimal HER rate of 16.78 mmol g^?1 h^?1 and high stability and recyclability under visible‐light irradiation (λ>420 nm). Detailed characterizations and in‐depth DFT calculations reveal the relationship between the heterojunction and photocatalytic activity and confirm the importance of NiS in accelerating the water dissociation kinetics, which is a crucial factor for photocatalytic HER.     

In situ integration of efficient photocatalyst Cu1.8S/ZnxCd1-xS heterojunction derived from a metal-organic framework

The development of photocatalysts for hydrogen evolution is a promising alternative to industrial hydrogen evolution; however, generation of high active, recyclable, inexpensive heterojunctions are still challenging. Herein, a novel strategy was developed to synthesize non-noble metal co-catalyst/solid solution heterojunctions using metal-organic frameworks (MOFs) as a precursor template. By adjusting the content of MOFs, a series of Cu_1.8S/Zn_xCd_1-xS heterojunctions were obtained, and the Cu_1.8S(3.7%)/Zn_0.35Cd_0.65S sample exhibits a maximum hydrogen evolution rate of 14.27 mmol h⁻¹ g⁻¹ with an apparent quantum yield of 3.7% at 420 nm under visible-light irradiation. Subsequently, the relationship between the heterojunction and photocatalytic activity were investigated by detailed characterizations and density functional theory (DFT) calculations, which reveal that loading Cu_1.8S can efficiently extend the light absorption, meanwhile, the electrons can efficiently transfer from Zn_0.35Cd_0.65S to Cu_1.8S, thus resulting more photogenerated electrons participating in surface reactions. This result can be valuable inspirations for the exploitation of advanced materials using rationally designed nanostructures for solar energy conversion.     

Triplet–Triplet Annihilation Upconversion for Photocatalytic Hydrogen Evolution

The solar generation of hydrogen by water splitting provides a promising path for renewable hydrogen production and solar energy storage. Upconversion of low-energy photons into high-energy photons constitutes a promising strategy to enhance the light harvesting efficiency of artificial hydrogen production systems. In the present study, upconversion micelles are integrated with Cd_0.5Zn_0.5S to construct solar energy conversion systems. The upconversion micelle is employed to upconvert red photons to cyan photons. Cd_0.5Zn_0.5S is sensitized by upconverted cyan light to produce hydrogen, but not by incident red light without triplet–triplet annihilation upconversion (TTA-UC). The performance of the upconversion photocatalytic system was dramatically affected by the concentration of Cd_0.5Zn_0.5S and the irradiation intensity. This novel system was able to produce about 2.3 μL hydrogen after 5 h of red light (629 nm) irradiation (2.4 mW cm⁻²). The present study provides a candidate for applications using low-energy photons for solar hydrogen generation.     

水热法制备NiS/Cd1-xZnxS及其高效光催化产氢性能

利用水热法制备 NiS 负载的 Cd1-xZnxS 光催化剂.结果表明：在0.35 mol?L-1 Na2SO3和0.25 mol?L-1 Na2S牺牲剂下,0.5%(摩尔分数, y) NiS/Cd0.3Zn0.7S (1840μmol?h-1)获得最好活性,是Cd0.3Zn0.7S (884μmol?h-1)的2.1倍,高于0.5%(质量分数, w) Pt (1390μmol?h-1)的产氢活性.测得其在λ=420 nm附近的表观量子效率为36.8%. X射线衍射(XRD)、紫外-可见漫反射光谱(UV-Vis DRS)、透射电子显微镜(TEM)以及X射线光电子能谱(XPS)的表征结果表明, NiS作为产氢活性位,转移光生电子,因此提高了光催化产氢活性.     

Enhanced Photocatalytic Hydrogen‐Production Performance of Graphene–ZnxCd1−xS Composites by Using an Organic S Source

In response to the increasing concerns over energy and environmental sustainability, photocatalytic water‐splitting technology has attracted broad attention for its application in directly converting solar energy to valuable hydrogen (H₂) energy. In this study, high‐efficiency visible‐light‐driven photocatalytic H₂ production without the assistance of precious‐metal cocatalysts was achieved on graphene–Zn_xCd_1?xS composites with controlled compositions. The graphene‐Zn_xCd_1?xS composites were for the first time fabricated by a one‐step hydrothermal method with thiourea as an organic S source. It was found that thiourea facilitates heterogeneous nucleation of Zn_xCd_1?xS and in situ growth of Zn_xCd_1?xS nanoparticles on graphene nanosheets. Such a scenario results in abundant and intimate interfacial contact between graphene and Zn_xCd_1?xS nanoparticles, efficient transfer of the photogenerated charge carriers, and enhanced photocatalytic activity for H₂ production. The highest H₂‐production rate of 1.06 mmol h^?1 g^?1 was achieved on a graphene–Zn_0.5Cd_0.5S composite photocatalyst with a graphene content of 0.5 wt %, and the apparent quantum efficiency was 19.8 % at 420 nm. In comparison, the graphene–Zn_xCd_1?xS composite photocatalyst prepared by using an inorganic S source such as Na₂S exhibited much lower activity for photocatalytic H₂ production. In this case, homogeneous nucleation of Zn_xCd_1?xS becomes predominant and results in insufficient and loose contact with the graphene backbone through weak van der Waals forces and a large particle size. This study highlights the significance of the choice of S source in the design and fabrication of advanced graphene‐based sulfide photocatalytic materials with enhanced activity for photocatalytic H₂ production.     

Enhanced visible light photocatalytic activity of CeO2@Zn0.5Cd0.5S by facile Ce(IV)/Ce(III) cycle

In this study, CeO₂@Zn_0.5Cd_0.5S heterostructure (Ce@ZCS) is synthesized via a simple two-step hydrothermal method. The effect of CeO₂ loading on the visible-light photoactivity of Zn_0.5Cd_0.5S is mainly investigated. It is found that Ce@ZCS shows a 1.9 times activity as high as ZCS for the MB degradation. The improved activity mainly results from the significant enhanced charge separation by CeO₂, in which the electron transfer is obviously promoted by the facile Ce(IV)/Ce(III) cycle. The excited electrons of ZCS is easy to transfer to CeO₂, thus obviously increasing the charge separation of ZCS. The accepted electrons by CeO₂ may easily be captured by the adsorbed O₂ to form O₂⁻, and then O₂⁻ could combine with H⁺/H₂O to form HO₂, and OH. Finally, O₂⁻, h⁺ and OH are confirmed as the major oxidative species in photocatalytic reaction for Ce@ZCS, and a possible photocatalytic mechanism is proposed. The cheap, efficient Ce@ZCS photocatalyst could be applied for practical waste water treatment.     

二维/一维BiOBr0.5Cl0.5/WO3 S型异质结助力光催化CO2还原

S型异质结不但可以提高载流子的分离效率,还可以维持较强的氧化还原能力。因此,构建S型异质是提高光催化二氧化碳还原反应的有效途径。本研究通过静电自组装法构建了具有近红外光响应(> 780 nm)的二维BiOBr_0.5Cl_0.5纳米片和一维WO₃纳米棒S型异质结光催化剂,并用于高效还原二氧化碳。能带位置和界面电子相互作用的综合分析表明：在光催化二氧化碳还原反应过程中,BiOBr_0.5Cl_0.5/WO₃遵循S型电子转移路径;不仅提高了载流子的高效分离,还维持了两相(BiOBr_0.5Cl_0.5和WO₃)较高的氧化还原能力。此外,二维纳米片/一维纳米棒的结构使得半导体之间具备良好的界面接触,有利于载流子的分离,且暴露更多的活性位点,最终提高催化效率。结果显示,BiOBr_0.5Cl_0.5/WO₃异质结催化剂表现出较高的CO₂还原能力和CO选择性,CO的产率高达16.68 μmol∙g^-1∙h^-1,分别是BiOBr_0.5Cl_0.5的1.7倍和WO₃的9.8倍。本工作为构建S型二维/一维异质结光催化剂高效还原二氧化碳提供了新的思路。     

Coupling Benzylamine Oxidation with CO2 Photoconversion to Ethanol over a Black Phosphorus and Bismuth Tungstate S-Scheme Heterojunction

Photoconversion of CO₂ and H₂O into ethanol is an ideal strategy to achieve carbon neutrality. However, the production of ethanol with high activity and selectivity is challenging owing to the less efficient reduction half-reaction involving multi-step proton-coupled electron transfer (PCET), a slow C−C coupling process, and sluggish water oxidation half-reaction. Herein, a two-dimensional/two-dimensional (2D/2D) S-scheme heterojunction consisting of black phosphorus and Bi₂WO₆ (BP/BWO) was constructed for photocatalytic CO₂ reduction coupling with benzylamine (BA) oxidation. The as-prepared BP/BWO catalyst exhibits a superior photocatalytic performance toward CO₂ reduction, with a yield of 61.3 μmol g⁻¹ h⁻¹ for ethanol (selectivity of 91 %).In situ spectroscopic studies and theoretical calculations reveal that S-scheme heterojunction can effectively promote photogenerated carrier separation via the Bi−O−P bridge to accelerate the PCET process. Meanwhile, electron-rich BP acts as the active site and plays a vital role in the process of C−C coupling. In addition, the substitution of BA oxidation for H₂O oxidation can further enhance the photocatalytic performance of CO₂ reduction to C₂H₅OH. This work opens a new horizon for exploring novel heterogeneous photocatalysts in CO₂ photoconversion to C₂H₅OH based on cooperative photoredox systems.     

Photocatalytic intercalated material based on HLaNb<Subscript>2</Subscript>O<Subscript>7</Subscript> as host and Cd<Subscript>0.8</Subscript>Zn<Subscript>0.2</Subscript>S as guest

A novel photocatalytic material (Pt,Cd0.8Zn0.2S)/HLaNb2O7 was fabricated by successive intercalation and exchange reactions. The (Pt,Cd0.8Zn0.2S)/HLaNb2O7 possessed a gallery height less than 0.5 nm and showed a broad absorption with wavelength over 370-500 nm. Using (Pt,Cd0.8Zn0.2S)/HLaNb2O7 as catalyst, the photocatalytic H2 evolution was more than 160 cm3·h-1·g-1 in the presence of Na2S as a sacrificial agent under irradiation with wavelength more than 290 nm from a 100-W mercury lamp. Furthermore, the catalyst showed photocatalytic activity even under visible light irradiation.     

Photopolymerization of water-soluble acrylic monomers induced by colloidal CdS and Cd x Zn1 − x S nanoparticles

Photocatalytic activity of CdS and Cd _x Zn_1−x S nanoparticles in the polymerization of acrylamide and acrylic acid in aqueous solutions has been found. It has been shown that the most probable way of the photogeneration of primary radicals is the reduction of an adsorbed monomer by the conduction band electrons of the semiconductor nanoparticles, a monomer oxidation by the valence band holes and atomic hydrogen addition to a monomer being complementary photoinitiation routes. A correlation between the composition of Cd_xZn_1-xS nanoparticles and their photocatalytic activity in the acrylamide polymerization has been established. It has been shown that an increase in the quantum yield of the photopolymerization in a sequence СdS < Cd_0.75Zn_0.25S < CdS_0.5Zn_0.5S < Cd_0.3Zn_0.7S originates from a concurrent increase of the conduction band potential of the semiconductor nanoparticles. A kinetic equation of the photocatalytic acrylamide polymerization has been derived. Quantum yields of the photoinitiation have been found to be as small as 10⁻⁴ to 10⁻³.     

CdS Reinforced with CoSX/NiCo-LDH Core-shell Co-catalyst Demonstrate High Photocatalytic Hydrogen Evolution and Durability in Anhydrous Ethanol

At present, inefficient charge separation of single photocatalyst impedes the development of photocatalytic hydrogen evolution. In this work, the CoS_X/NiCo-LDH core-shell co-catalyst was cleverly designed, which exhibit high activity and high stability of hydrogen evolution in anhydrous ethanol system when coupled with CdS. Under visible light (λ≥420 nm) irradiation, the 3 %Co/NiCo/CdS composite photocatalyst exhibits a surprisingly high photocatalytic hydrogen evolution rate of 20.67 mmol g⁻¹ h⁻¹, which is 59 times than that of the original CdS. Continuous light for 20 h still showed good cycle stability. In addition, the 3 %Co/NiCo/CdS composite catalyst also shows good hydrogen evolution performance under the Na₂S/Na₂SO₃ and lactic acid system. The fluorescence (PL), ultraviolet-visible diffuse reflectance (UV-vis) and photoelectrochemical tests show that the coupling of CdS and CoS_X/NiCo-LDH not only accelerates the effective transfer of charges, but also greatly increases the absorption range of CdS to visible light. Therefore, the hydrogen evolution activity of the composite photocatalyst has been significantly improved. This work will provide new insights for the construction of new co-catalysts and the development of composite catalysts for hydrogen evolution in multiple systems.     

Engineering a Self-Grown TiO2/Ti-MOF Heterojunction with Selectively Anchored High-Density Pt Single-Atomic Cocatalysts for Efficient Visible-Light-Driven Hydrogen Evolution

A photocatalyst TiO₂/Ti-BPDC-Pt is developed with a self-grown TiO₂/Ti-metal–organic framework (MOF) heterojunction, i.e., TiO₂/Ti-BPDC, and selectively anchored high-density Pt single-atomic cocatalysts on Ti-BPDC for photocatalytic hydrogen evolution. This intimate heterojunction, growing from the surface pyrolytic reconstruction of Ti-BPDC, works in a direct Z-scheme, efficiently separating electrons and holes. Pt is selectively anchored on Ti-BPDC by ligands and is found in the form of single atoms with loading up to 1.8 wt %. The selective location of Pt is the electron-enriched domain of the heterojunction, which further enhances the utilization of the separated electrons. This tailored TiO₂/Ti-BPDC-Pt shows a significantly enhanced activity of 12.4 mmol g⁻¹ h⁻¹ compared to other TiO₂- or MOF-based catalysts. The structure-activity relationship further proves the balance of two simultaneously exposed domains of heterojunctions is critical to fulfilling this kind of catalyst.     

Unraveling the Interfacial Charge Migration Pathway at the Atomic Level in a Highly Efficient Z‐Scheme Photocatalyst

A highly efficient Z‐scheme photocatalytic system constructed with 1D CdS and 2D CoS₂ exhibited high photocatalytic hydrogen‐evolution activity of 5.54 mmol h^?1 g^?1 with an apparent quantum efficiency of 10.2 % at 420 nm. More importantly, its interfacial charge migration pathway was unraveled: The electrons are efficiently transferred from CdS to CoS₂ through a transition atomic layer connected by Co–S_5.8 coordination, thus resulting in more photogenerated carriers participating in surface reactions. Furthermore, the charge‐trapping and charge‐transfer processes were investigated by transient absorption spectroscopy, which gave an estimated charge‐separation yield of approximately 91.5 % and a charge‐separated‐state lifetime of approximately (5.2±0.5) ns in CdS/CoS₂. This study elucidates the key role of interfacial atomic layers in heterojunctions and will facilitate the development of more efficient Z‐scheme photocatalytic systems.     

Visible‐Light‐Driven Self‐Coupling of Methylarenes Catalyzed by Ni2P@Cd0.5Zn0.5S Nanoparticles

The Ni₂P@Cd_0.5Zn_0.5S nanoparticles photocatalyzed self‐coupling of p‐xylene was reported here, and the corresponding coupling product 1,2‐di‐p‐tolylethane was obtained. The reaction could be extended to toluene derivatives with electron‐donating and electron‐withdrawing substituents. Ni₂P@Cd_0.5Zn_0.5S nanoparticles had already been characterized by XRD, ICP‐AES, SEM, TEM, UV/Vis, FL, XPS. The Mott–Schottky curves of Ni₂P@Cd_0.5Zn_0.5S were made through electrochemical methods. An active carbon free‐radical was captured through ESR measurement under irradiation. The research demonstrated this photocatalytic system feasible for the self‐coupling reaction of toluene derivatives.     

Fabrication of S-scheme hollow TiO2@Bi2MoO6 composite for efficiently photocatalytic CO2 reduction

Herein, an S-scheme hollow TiO₂@Bi₂MoO₆ heterojunction was synthesized for photocatalytic reduction of CO₂ under simulated sunlight. Among all prepared composites, the TiO₂@Bi₂MoO₆ with 20% of TiO₂ exhibited the highest CO yield (183.97 μmol/g within 6 h), which was 4.0 and 2.4 times higher than pristine TiO₂ and Bi₂MoO₆, respectively. The improved photocatalytic activity may be due to the formation of S-scheme heterojunction to promote the separation and transfer of photogenerated charge carriers. Additionally, this hollow structure provided abundant sites in terms of CO₂ adsorption and activation. Meanwhile, the photogenerated charge transfer mechanism of the S-scheme was verified by work function calculations, Electron paramagnetic resonance (EPR) measurements as well as X-ray photoelectron spectroscopy (XPS). This research presents a novel approach to improve photocatalytic reduction of CO₂ via morphology modulation and the fabrication of S-scheme heterojunction.     

Facile Fabrication of Bi24O31Br10 Nanosheets with Phosphorus Sulfide Quantum Dots for Highly Photocatalytic Treating Organic Dyes

Herein, we report the synthesis of novel narrow band gap phosphorus sulfide quantum dots (PSQDs)-modified bismuth oxybromide (Bi₂₄O₃₁Br₁₀) heterojunction (noted as BOB/PS) for the highly efficient photo-degradation of hazardous organic pollutants including rhodamine B (RhB), methyl orange (MO), and malachite green (MG). Such a high photocatalytic activity of BOB/PSQDs heterojunction derives from the improved visible-light response capacity, high surface area/pore volume, and suitable band structure for efficient electron transfer to generate reactive oxygen species (ROS). ROS trapping experiments demonstrate that hydroxy (⋅OH) and superoxide radicals (⋅O₂⁻) play important roles in the photo-degradation. A possible S-scheme mechanism for the enhanced photocatalytic activity of BOB/PS is proposed.