Molecular Packing and Solid-State Photophysical Properties of 1,3,6,8-Tetraalkylpyrenes

The relationship between the photophysical properties and molecular orientation of 1,3,6,8-tetraalkylpyrenes in the solid state is described herein. The introduction of alkyl groups with different chain structures (in terms of length and branching) did not affect the photophysical properties in solution, but significantly shifted the emission wavelengths and fluorescence quantum yields in the solid state for some samples. Pyrenes bearing ethyl, isobutyl, or neopentyl groups at the 1-, 3-, 6-, and 8-positions showed similar emission profiles in both the solution and solid states. In contrast, pyrenes bearing other alkyl groups exhibited an excimer emission in the solid state, similar to that of the parent pyrene. On studying the photophysical properties in the solid state with respect to the obtained crystal structures, the observed solid-state photophysical properties were found to depend on the relative position of the pyrene chromophores. The solid-state photophysical properties can be controlled by the alkyl groups, which provide changing crystal packing. Among the pyrenes tested, 1,3,6,8-tetraethylpyrene showed the highest fluorescence quantum yield of 0.88 in the solid state.     

Enhanced fluorescence of remote functionalized diaminodicyanoquinodimethanes in the solid state and fluorescence switching in a doped polymer by solvent vapors

Remote functionalized zwitterionic diaminodicyanoquinodimethanes are found to exhibit a dramatic enhancement of light emission in the solid state and when doped in polymer films, as compared to the solution state. Crystal structure analysis of prototypical molecules reveals the role of the remote functionality in the solid state molecular organization. Semiempirical quantum chemical computations provide a viable model to explain the interesting phenomenon of fluorescence enhancement as arising from the inhibition of geometry relaxation of the vertical excited state to a nonemitting state. The reversible switching of a doped polymer film fluorescence triggered by solvent vapors is demonstrated.     

Benzothiadiazole-based dyes that emit red light in solution,solid, and liquid state

In this paper, we report the preparation and red-light-emitting behavior of benzothiadiazole–tris(alkyloxy)phenylethene dyes. In solution, we observed an efficient red light emission with high fluorescence quantum yields (up to 0.78). With increase in solvent polarity, the emission bands shifted to longer wavelengths accompanied by a large Stokes shift of up to 152 nm. A moderate fluorescence quantum yield of 0.52 could be achieved even in the polar solvent dimethylformamide. Red light emission with good fluorescence quantum yields (up to 0.50) was also observed in the bulk solid, liquid, and film state.     

Insights into the AIEE of 1,8‐Naphthalimides (NPIs): Inverse Effects of Intermolecular Interactions in Solution and Aggregates

Systematic structural perturbation has been used to fine‐tune and understand the luminescence properties of three new 1,8‐naphthalimides (NPIs) in solution and aggregates. The NPIs show blue emission in the solution state and their fluorescence quantum yields are dependent upon their molecular rigidity. In concentrated solutions of the NPIs, intermolecular interactions were found to quench the fluorescence due to the formation of excimers. In contrast, upon aggregation (in THF / H₂O mixtures), the NPIs show aggregation‐induced emission enhancement (AIEE). The NPIs also show moderately high solid‐state emission quantum yields (ca. 10–12.7 %). The AIEE behaviour of the NPIs depends on their molecular rigidity and the nature of their intermolecular interactions. The NPIs 1 – 3 show different extents of intermolecular (π–π and C?H???O) interactions in their solid‐state crystal structures depending on their substituents. Detailed photophysical, computational and structural investigations suggest that an optimal balance of structural flexibility and intermolecular communication is necessary for achieving AIEE characteristics in these NPIs.     

Highlights on the Road towards Highly Emitting Solid‐State Luminophores: Two Classes of Thiazole‐Based Organoboron Fluorophores with the AIEE/AIE Effect

Developing a novel, small‐sized molecular building block that may be capable of emitting light in the solid state is a challenging task and has rarely been reported in the literature. BF₂‐containing dyes seem to be promising candidates towards this aim. Two series of new N^NBF₂ complexes showing aggregation‐induced emission (AIE) and aggregation‐induced emission enhancement (AIEE) were designed and synthesized by means of a new protocol, which improved on the traditional method by employing microwave irradiation. The optical and photophysical properties of the BF₂ complexes were investigated in depth. The synthesized complexes showed fluorescence in both solution and the solid state and, in a mixture of tetrahydrofuran/water, may aggregate into fluorescent nanoparticles. The experimental investigation was supported by quantum mechanical calculations. Their availability, stability, large Stokes shifts, and aggregation capabilities, along with their solid‐state emission capability, render this new class of BF₂ complexes promising AIEE/AIE fluorophores for further applications in the fields of fluorescence imaging and materials science.     

Dendrimers with a Pentaphenylene Core: A Photophysical Study

Novel dendrimers G2PC and G4PC consisting of a p‐pentaphenylene core ( PC ) appended in the para position with two second‐generation ( G2 ) or two fourth‐generation ( G4 ) sulfonimide branches and two n‐octyl chains, as well as a model compound of the pentaphenylene core ( G0PC ), are prepared. The photophysical properties (absorption, emission, and excitation spectra; fluorescence decay lifetime; and fluorescence anisotropy spectra) of the three compounds are investigated under different experimental conditions (dichloromethane solution and solid state at 293 K, dichloromethane/methanol rigid matrix at 77 K). In the absorption spectra contributions from both the branches and the core can be clearly identified. The fluorescence spectra show only the characteristic fluorescence of the pentaphenylene unit with λ_max around 410 nm in fluid solution and 420 nm in the solid state. In solution the fluorescence quantum yields are 0.78, 0.76, and 0.72 for G0PC , G2PC , and G4PC , respectively, and the fluorescence lifetime is about 0.7 ns in all cases. Energy transfer from the chromophoric groups of the dendrimer branches to the core does not occur. The three compounds show the same, high steady‐state anisotropy value (0.35) in dilute rigid‐matrix solution at 77 K. In dichloromethane at 293 K, the increasing anisotropy values along the series G0PC (0.17), G2PC (0.27), and G4PC (0.32), with increasing molecular volume of the three compounds, show that depolarization takes place by molecular rotation. In the solid state the anisotropy is very low (0.015, 0.017, and 0.035 for G0PC , G2PC , and G4PC , respectively), probably because of fast depolarization via energy migration.     

3,14‐Bis(p‐nitrophenyl)‐17,17‐dipentyltetrabenzo[a,c,g,i]‐fluorene: A New Fluorophore Displaying Both Remarkable Solvatochromism and Crystalline‐Induced Emission

A series of 17,17‐dialkyl‐3,14‐diaryltetrabenzofluorenes were efficiently prepared by using Suzuki–Miyaura cross‐coupling reactions of the corresponding 3,14‐dibromo derivatives. Studies of the unique fluorescence properties of these compounds showed that they display intense blue to yellow fluorescence with high quantum yields in the solution state and blue to orange fluorescence with moderate quantum yields in the solid state. In addition, the fluorescence wavelength of the bis(p‐nitrophenyl) derivative is remarkably solvent‐dependent in a manner that correlates with the solvent polarity parameter E_T(30). The results of density function theory calculations suggest that the intramolecular charge‐transfer character of the HOMO–LUMO transition is responsible for the large solvent effect. Moreover, addition of water to a tetrahydrofuran (THF) solution of this compound leads to quenching of the yellow fluorescence owing to an increase in the solvent polarity. However, when the amount of water fraction exceeds 70 %, a new fluorescence band appears at the same orange‐red emission wavelength as that of the solid‐state fluorescence. This observation suggests the occurrence of a crystallization‐induced emission (CIE) phenomenon in highly aqueous THF.     

How a Small Structural Difference Can Turn Optical Properties of π‐Extended Coumarins Upside Down: The Role of Non‐Innocent Saturated Rings

The fluorescence properties of two new families of heterocycles possessing either a seven‐ or five‐membered ring attached at the core molecule are entirely different in solution and in the solid state. Crystallization has the effect of inhibiting non‐radiative excited‐state deactivation pathways, operative in solution for the seven‐membered ring compounds, thus leading to significant fluorescence efficiency in the solid state, with quantum yields ranging from 0.10 to 0.36. Conversely, the five‐membered ring derivatives, which display notable emission properties in solution, are almost non‐emissive in the crystalline state, characterized by a long‐range π‐stacked arrangement. When embedded in polymeric films, both series show fluorescence features similar to the solution case, with remarkable fluorescence quantum yields ranging from 0.09 to 0.41. According to quantum chemical calculations, 3H‐chromeno[3,4‐c]pyridine‐4,5‐diones show the specific mechanism of fluorescence quenching. The derivatives bearing the seven‐membered ring undergo, in solution, a significant structural deformation in the excited state, resulting in a large decrease of the energy gap between S₁ and S₀ and hence to a substantial contribution of the internal conversion in the relaxation process. The fluorescence quenching of the five‐membered ring derivatives is in turn related to the intermolecular interaction between adjacent molecules prevailing to a greater extent in the crystal lattice.     

Self‐Assembly and Aggregate‐Induced Enhanced Emission of Amphiphilic Fluorescence Dyes in Water and in the Solid State

1‐Cyano‐1,2‐bis(biphenyl)ethene (CNBE) derivatives with a hexa(ethylene glycol) group as an amphiphilic side chain were synthesized and the self‐assembling character and fluorescence behavior were investigated. The amphiphilic derivatives showed aggregate‐induced enhanced emission (AIEE) in water and in the solid state. The fluorescence quantum yield increased as the rigidity of the aggregates increased (i.e., in ethyl acetate<in water<in the solid state). As determined from measurements of fluorescence spectra, fluorescence quantum yields, and fluorescence lifetimes, a key factor for the enhanced emission is suppression of the nonradiative decay process arising from restricted molecular motion. Additionally, the difference in the emission rate constant is not negligible and can be used to interpret the difference in fluorescence quantum yield in water and in the solid state.     

Impact of Heteroatom Substitution on Dual-State Emissive Rigidified 2-(2’-hydroxyphenyl)benzazole Dyes: Towards Ultra-Bright ESIPT Fluorophores**

2-(2’-Hydroxyphenyl)benzazole (HBX) fluorophores are well-known excited-state intramolecular proton transfer (ESIPT) emitters largely studied for their synthetic versatility, photostability, strong solid-state fluorescence and ability to engineer dual emission, thus paving the way to applications as white emitters, ratiometric sensors, and cryptographic dyes. However, they are heavily quenched in solution, due to efficient non-radiative pathways taking place as a consequence of the proton transfer in the excited-state. In this contribution, the nature of the heteroring constitutive of these rigidified HBX dyes was modified and we demonstrate that this simple structural modification triggers major optical changes in terms of emission color, dual emission engineering, and importantly, fluorescent quantum yield. Investigation of the photophysical properties in solution and in the solid state of a series of ethynyl-TIPS extended HBX fluorophores, along with ab initio calculations demonstrate the very promising abilities of these dyes to act as bright dual-state emitters, in both solution (even in protic environments) and solid state.     

聚集诱导发光新材料9,10-双[2-(1-甲基-1H-吡咯-2-基)乙烯基]蒽的 合成及性能

合成并全面表征了一种新的蒽烯类化合物9,10-双[2-(1-甲基-1H-吡咯-2-基)乙烯基]蒽(MPVAn). 该化合物具有显著的聚集诱导发光特性. 它在溶液态时几乎不发光, 但在固态时的光致发光强度达到溶液态的数百倍. 为了确定标题化合物的聚集诱导发光机制, 研究了它在不同溶液粘度及温度下的光致发光行为, 结果表明聚集态发光增强是由于分子内转动受阻所致. 它的粉末在420 nm光的激发下发射纯的黄光, 峰值为562 nm, 半峰宽为66 nm. 采用紫外-可见吸收光谱及循环伏安法研究了化合物的电子性能, 其HOMO和LUMO能级分别为－4.78和－2.28 eV.     

D-A结构的9,9-二芳基芴类发光材料的合成、表征及性能

设计合成了一系列以三苯胺结构为核心的具有推电子-拉电子(D-A)结构的9,9-二芳基芴类有机小分子. 研究了介质极性对吸收与发射光谱行为的影响及分子结构与其发光能力的关系. 该类化合物荧光发射波长范围在430-530 nm. 并在特定极性溶剂中观察到双重荧光现象. 溶剂效应显示该类化合物随着介质极性的增加, 分子内电荷转移态(ICT)的荧光发射峰波长先红移后蓝移且荧光强度降低, 表现出扭曲的分子内电荷转移(TICT)行为. 该类化合物的最高占有分子轨道(HOMO)能级位于-5.24 - -5.50 eV, 且可以通过改变取代基电负性的强弱来调节. 所得化合物的玻璃化转变温度为192-206 °C, 热重分析(TGA)表明化合物的热分解温度都在400 °C以上, 具有良好的热稳定性.     

Photochemically Enhanced Emission by Introducing Rational Photoactive Subunits into an Aggregation-Induced Emission Luminogen

Herein, we propose a rational design strategy by introducing photoactive thienyl and pyridyl groups into an AIE-active tetraarylethene skeleton to achieve highly efficient photochemistry-activated fluorescence enhancement from dominantly photo-physical aggregation-induced emission behavior, and prove that such photoactivated fluorescence enhancement is perfectly suited for superstable photocontrollable dual-mode patterning applications in both solution and solid matrix. It is found that the photoactivated fluorescence of designed AIEgen is attributed to the irreversible cyclized-dehydrogenation reaction under UV irradiation, and the oxidation product has a brighter fluorescence in both solution and solid states owning to its rigid and planar structure. The overall transformation rate of the AIEgen from its opened form to dehydrogenated form is up to nearly 100 % in a short period of UV irradiation, and the fast transformation and the stable product of this photochemical reaction guarantees super stability of photocontrolled patterning, which can be applied in photoactivated dual-mode patterning and advanced anti-counterfeiting.     

Synthesis and Design of Aggregation‐Induced Emission Surfactants: Direct Observation of Micelle Transitions and Microemulsion Droplets

The direct visualization of micelle transitions is a long‐standing challenge owing to the intractable aggregation‐caused quenching of light emission in the micelle solution. Herein, we report the synthesis of a surfactant with a tetraphenylethene (TPE) core and aggregation‐induced emission (AIE) characteristics. The transition processes of surfactant micelles and the microemulsion droplets (MEDs) formed by the surfactant with a TPE core were clearly visualized by a high‐contrast fluorescence imaging method. The fluorescence intensity of the MEDs decreased as the size of MEDs increased as a result of weakening of the restriction of intramolecular rotation (RIR). The results of this study deepen our understanding of micelle‐transition processes and provide solid evidence in favor of the hypothesis that the AIE phenomenon has its origin in the RIR of fluorophores in the aggregate state.     

White Emitters by Tuning the Excited‐State Intramolecular Proton‐Transfer Fluorescence Emission in 2‐(2′‐Hydroxybenzofuran)benzoxazole Dyes

The synthesis, structural, and photophysical properties of a new series of original dyes based on 2‐(2′‐hydroxybenzofuran)benzoxazole (HBBO) is reported. Upon photoexcitation, these dyes exhibit intense dual fluorescence with contribution from the enol (E*) and the keto (K*) emission, with K* being formed through excited‐state intramolecular proton transfer (ESIPT). We show that the ratio of emission intensity E*/K* can be fine‐tuned by judiciously decorating the molecular core with electron‐donating or ‐attracting substituents. Push–pull dyes 9 and 10 functionalized by a strong donor (nNBu₂) and a strong acceptor group (CF₃ and CN, respectively) exhibit intense dual emission, particularly in apolar solvents such as cyclohexane in which the maximum wavelength of the two bands is the more strongly separated. Moreover, all dyes exhibit strong solid‐state dual emission in a KBr matrix and polymer films with enhanced quantum yields reaching up to 54 %. A wise selection of substituents led to white emission both in solution and in the solid state. Finally, these experimental results were analyzed by time‐dependent density functional theory (TD‐DFT) calculations, which confirm that, on the one hand, only E* and K* emission are present (no rotamer) and, on the other hand, the relative free energies of the two tautomers in the excited state guide the ratio of the E*/K* emission intensities.     

Shedding Light on the Origin of Solid-State Luminescence Enhancement in Butterfly Molecules

Different molecular strategies have been carefully evaluated to produce solid-state luminescence enhancement (SLE) in compounds that show dark states in solution. A set of α-phenylstyrylarene derivatives with a butterfly shape have been designed and synthesised, for the first time, with the aim of improving the solid-state fluorescence emission of their parent styrylarene compounds. Although these butterfly molecules are not fluorescent in solution, one of them (1,2,4,5-tetra(α-phenylstyryl)benzene) exhibits a fluorescence quantum yield as high as 68 % in a drop-cast sample and 31 % in its crystalline form. In contrast, 1,3,5-tris(α-phenylstyryl)benzene and 4,6-bis(α-phenylstyryl)pyrimidine do not show SLE. A range of fluorescence spectroscopy experiments and DFT calculations were carried out to unravel the origin of different photophysical behaviour of these compounds in the solid state. The results indicate that a rational strategy to control the SLE effect in luminogens depends on a delicate balance between molecular properties and inter-/intramolecular interactions in the solid state.     

5,12‐Diacetyl‐5,12‐dihydroquinoxalino[2,3‐b]quinoxalines: Solid‐State Fluorescence,AIE Properties,and Orbital Switching by Substituent Effect

The compound 5,12‐diacetyl‐5,12‐dihydroquinoxalino[2,3‐b]quinoxaline 1 a and its derivatives were prepared, and their solid‐ and solution‐state spectroscopic properties were studied; 1 a shows stronger fluorescence in solution than in the solid state due to aggregation caused by self‐quenching. Phenyl‐ or alkoxy‐substituted derivatives 1 b – d show solid‐state fluorescence with moderate quantum yields of about Φ=0.12–0.15, although the corresponding values are 0.01–0.07 in solution. The spectroscopic properties of alkoxy‐substituted derivatives were hardly changed compared to 1 a and 1 b , although 1 a and 1 b have similar absorption and fluorescence maxima in solution and in the solid state. DFT calculations indicate that orbital switching occurs between HOMO and HOMO‐1 and HOMO‐2 due to orbital interactions with introduced substituents. Crystal structure analysis revealed that the molecules have bent structures around tertiary nitrogen atoms and form a characteristic dimeric structure.     

Rational Design of Dual-State Emission Luminogens with Solvatochromism by Combining a Partially Shared Donor–Acceptor Pattern and Twisted Structures

We report a general design strategy for a new class of luminogens with dual-state emission (DSEgens) that are brightly emissive in both the solution and solid state, with solvatochromism properties, by constructing a partially shared donor–acceptor pattern based on a twisted molecule. The DSEgens with bright fluorescence emission in both the solid and solution state demonstrate a unique solvatochromism behaviour depending on solvent polarity and thus may have applications in anti-counterfeiting.     

Highly Emissive Diborylphenylene‐Containing Bis(phenylethynyl)benzenes: Structure–Photophysical Property Correlations and Fluoride Ion Sensing

A series of 2,5‐bis(dimesitylboryl)‐1,4‐bis(arylethynyl)benzenes 1 – 6 that contain various p‐substituents on the terminal benzene rings, including NPh₂ ( 1 ), OMe ( 2 ), Me ( 3 ), H ( 4 ), CF₃ ( 5 ), and CN ( 6 ) groups, were synthesized, and the effects of the p‐substituents on the absorption and fluorescence properties were investigated both in solution and in the solid state. Linear relationships were obtained not only between the Hammett σ_p⁺ constants of the p‐substituents and the absorption and fluorescence maxima, quantum yields, and excited‐state dynamics parameters in solution, but also between the σ_p⁺ constants and the fluorescence quantum yields in the solid state. An important finding extracted from these results is that the suppressed fluorescence quenching in the solid state is a common feature for the present laterally boryl‐substituted π‐conjugated skeletons. Hence, the diborylphenylene can serve as a useful core unit to develop highly emissive organic solids. In fact, most of the derivatives showed more intense emission in the solid state than in solution. In addition to these studies, the titration experiment of 1 by the addition of nBu₄NF was conducted, which showed the stepwise bindings of two fluoride ions with high association constants as well as a drastic change in the fluorescence spectra, while constantly maintaining high quantum yields (0.61–0.76), irrespective of the binding modes. This result also demonstrated the potential utility of the present molecules as an efficient fluorescent fluoride ion sensor.     

Synthesis and Fluorescent Behaviors of Polymers Bearing Stilbene Derivatives

A series of novel acrylate monomers bearing stilbene segments with D-π -A structure, 4-methacrylate-4′-nitro stilbene (NS), 4-(6-methacrylate)hexyl-4′-nitro stilbene (HNS) and 4-(6-methacrylate)hexyl-2,3-dimethoxy-4′-nitro stilbene (DMHNS), were synthesized by the Witting reaction and polymerized by free radical polymerization. These stilbene-containing monomers and polymers were fully characterized, and their fluorescent properties in solution and solid state were also investigated. The emission band of monomers and corresponding polymers in solution also showed a remarkable effect with increasing polarity of the solvent. More importantly, the fluorescence emission could be adjusted from green to orange and even red regions by forming donor-π -acceptor (D-π -A) construction.