Nanostructured CoMoO4 Supported on Mesoporous SBA-15 for Catalytic Oxidative Dehydrogenation of Propane to Propene

Nanostructured cobalt molybdate catalysts supported on mesoporous silica SBA-15 with different loadings were prepared by citric acid coordination-impregnation method and characterized by XRD, TEM, and BET techniques. The characterization results showed that high loading of well-dispersed crystalline CoMoO₄ may be achieved using citric acid coordination-impregnation method and the mesoporous structure of the support remained intact. The catalytic activity of these catalysts in the oxidative dehydrogenation of propane was investigated. The catalysts of nanostructured cobalt molybdate supported on mesoporous silica SBA-15 showed better catalytic performance than the corresponding bulk composite oxide and nanostructured CoMoO₄ supported on SBA-15 with loading of 13% (mass fraction, w) displayed propene yield of 16.8% at 823 K.     

介孔载体负载Pt催化剂上α-酮酸酯的不对称氢化

以介孔材料SBA-15、经或未经Al2O3修饰的具有三维立方孔道结构的SiO2为载体,制备了负载型Pt催化剂,并用于催化α-酮酸酯底物2-氧代-4-苯基-丁酸乙酯(EOPB)和丙酮酸乙酯(Etpy)的不对称氢化反应中.结果表明,当SBA-15孔径由6.2,7.6和9.2nm依次增加时,EOPB不对称氢化的活性和手性选择...     

Mesoporous SBA-15 materials modified with PW or W active species as catalysts for the epoxidation of olefins with H<Subscript>2</Subscript>O<Subscript>2</Subscript>

Five catalysts containing PW or W active species that anchored onto aminosilylated mesoporous silica SBA-15 by a post-grafting route were prepared and the resulting PW or W/APTES/SBA-15 hybrid materials were characterized by XRD, N₂ adsorption/desorption, surface area analysis, TEM, FT-IR, and ICP (inductively coupled plasma atomic emission spectroscopy). The names of these catalysts have been abbreviated as SBA-15m-a, SBA-15m-b, SBA-15m-c, SBA-15m-d, and SBA-15m-e according to the different active species. The PW or W active species were highly dispersed in the channels of the modified mesoporous materials. The interaction between PW or W species and amino groups grafted on the channel surface of SBA-15 led to the immobilization of PW or W species. Their catalytic activity in the epoxidation of cyclooctene with H₂O₂ as oxidant was investigated. Among them, SBA-15m-a showed the best performance, with 98.9% conversion and 98.4% selectivity. The catalyst could be reused for six times with a little decrease in activity.     

Preparation and application of nanocatalysts via surface functionalization of mesoporous materials

Surface immobilization of active species onto mesoporous materials is gaining importance, especially in the design of functionalized mesoporous materials as a nanocatalyst through heterogenization of homogeneous catalytic systems. This article summarizes recent work on the synthesis, characterization and catalytic performance of the functionalized mesoporous catalysts performed by the present authors. A cationic rhenium(I) complex was encapsulated into mesoporous Al-MCM-41 molecular sieve using a ion-exchange method, yielding a new photocatalyst to be active for photocatalytic reduction of CO₂. Surface functionalization of mesoporous silica SBA-15 with sulfonic acid groups was investigated to give a solid acid catalyst. The chemically modified Fe-containing mesoporous materials, which are active for hydroxylation of phenol, were prepared by a surface-grafting method that iron salts are immobilized onto mesoporous Si-MCM-41 with the help of 3-aminopropyltrimethoxysilane as a linker. A cobalt(III) complex was heterogenized onto mesoporous silica SBA-15 containing carboxylic groups in order to utilize as a solid catalyst for the liquid-phase oxidation of aromatic hydrocarbons.     

Metallic nickel supported on mesoporous silica as catalyst for hydrodeoxygenation: effect of pore size and structure

Catalytic hydrodeoxygenation (HDO) of anisole, a methoxy-rich lignin-derived bio-oil model compound, was carried out over a series of Ni-containing (5, 10, 20, and 30 wt%) catalysts with commercial silica and ordered mesoporous silica SBA-15 as support. Both supports and catalysts were characterized by N₂ adsorption–desorption isotherms, X-ray diffraction, CO chemisorption, and transmission electron microscopy (TEM). Catalytic reaction was performed at 250 °C and 10 bar H₂ pressure. Depending on the catalyst support used and the content of active metal, the catalytic activity and product distribution changed drastically. Increase of the nickel loading resulted in increased anisole conversion and C₆ hydrocarbon (benzene and cyclohexane) yield. However, loading more Ni than 20 wt% resulted in a decrease of both conversion and C₆ yield due to agglomeration of Ni particles. In addition, Ni/SBA-15 samples exhibited much stronger catalytic activity and selectivity toward C₆ hydrocarbon products compared with Ni/silica catalysts. The differences in catalytic activity among these catalysts can be attributed to the effect of the pore size and pore structure of mesoporous SBA-15. SBA-15 can accommodate more Ni species inside channels than conventional silica due to its high pore volume with uniform pore structure, leading to high HDO catalytic activity.     

常温常压下硅氨基化介孔SBA-15负载Keggin型钼钒杂多酸催化氧化乙醛的反应研究

Keggin-type molybdovanadophosphoric acids(HPA),H_4PMo_(11)VO_(40)(1),H_5PMo_(10)V_2O_(40)(2)and H_6PMo_9V_3O_(40)(3)were anchored onto γ-aminopropyltriethoxysilane(APTS)aminosilylated silica mesoporous SBA-15 throughacid-base neutralization and the resulting HPA/APTS/SBA-15 were characterized by BET,TEM,XRD,ICP,FTIRand ~(31)P MAS NMR.The characterization results indicate that the Keggin-structure of these HPAs is preservedwithin the mesoporous silica host.The samples were tested for catalytic aerobic oxidation of acetaldehyde hetero-geneously in liquid phase under ambient condition.The electrostatic force between heteropoly acid and aminogroups grafted on the silica channel surface leads to strong immobilization of HPA inside SBA-15 which is againstthe leaching during the reaction.The good catalytic performance and easy recycle of these catalysts make them aspotential environmental friendly catalysts for elimination of indoor air pollutants.     

Preparation, characterization and catalytic activity towards green reactions of sulfonic functionalized SBA-15

Acidic heterogeneous catalysts based on the anchorage of sulfonic groups on SBA-15 mesoporous silica were synthesized. In a first synthesis step, samples containing mercapto groups were prepared by co-condensation of tetraethylorthosilicate with 3-mercaptopropyltrimethoxysilane, in presence of ethylene-propylene block copolymer as mesoporous silica structure director. In other samples, mercapto groups were introduced by post-functionalization of the traditional calcined SBA-15. In a second step, these mercapto groups were oxidized in order to get sulfonic acid groups on the surface. Characterization of the samples was carried out by N₂ adsorption-desorption, FTIR, XPS and acid-base titration. Spectroscopic techniques showed that the effective incorporation of sulfonic groups depends on the synthesis methodology used. In turn, the SBA-15 post-synthesis functionalization produces changes in structural characteristics like a decrease in BET surface and changes in the pore size distribution. The as-prepared materials were tested as acid catalysts in the alkylation of isobutane with 1-butene, and in the esterification of free fatty acids with methanol. The results obtained show a lack of activity in the alkylation reaction which can be associated with the formation and stabilization of the intermediate carbocation species.     

Synthesis of SBA-15 from low cost silica precursor obtained from sugarcane leaf ash and its application as a support matrix for lipase in biodiesel production

Ordered mesoporous silica material was synthesized from a low-cost precursor, sugarcane leaf ash, was used as a support matrix for lipase for the production of biodiesel. The mesoporous samples were characterized using Fourier transform infra red spectroscopy. The surface topography and morphology of the mesoporous materials were studied using scanning electron microscope. The pore diameter, pore volume, Brunauer Emmett and Teller surface area of the mesoporous material were determined by N₂ gas adsorption technique. Different pore size Santa Barbara Acid-15 (SBA-15) samples were synthesized and their lipase immobilization capacity and specific enzyme activity of immobilization lipase were determined and compared. Lipase from Candida Antarctica immobilized on SBA-15 (C) had shown maximum percentage immobilization and specific enzyme activity. The immobilized lipase mesoporous matrix was used for biodiesel production from crude non-edible Calophyllum inophyllum oil. The percentage yield of fatty acid methyl ester, 97.6 % was obtained under optimized conditions: 100 mg of lipase immobilized on SBA-15, 6:1 methanol to oil molar ratio, the reaction of 2 g C. inophyllum oil with methanol.     

VO<Subscript>x</Subscript>/Zr–SBA-15 catalysts for selective oxidation of ethanol to acetaldehyde

Effect of zirconium presence in the silica framework and content and speciation of vanadium surface oxo-complexes on the catalytic behavior of VO_x/Zr–SBA-15 catalysts in oxidative dehydrogenation of ethanol was investigated. Experimental results bring evidence of successful incorporation of zirconium into ordered mesoporous silica framework with the preservation of ordered mesoporosity by hydrothermal template base synthesis method. The presence of zirconium in the SBA-15 framework increases reducibility of vanadium species and acidity of the catalysts. It is reflected in higher activity of vanadium species expressed as turn-over frequency (e.g., TOF of 20 h^?1 for 5%VO_x/Zr–SBA-15 sample in comparison with TOF of 12 h^?1 for 5%VO_x/SBA-15 sample) and also in significant decrease of selectivity to acetaldehyde (65% in comparison with 90% for mentioned samples) followed by increase in selectivity to ethylene (25% in comparison with 5%). This change in distribution of reaction products is related to stronger acidity character of surface OH groups and inhibition effect of formed water vapours on the oxidative dehydrogenation products (acetaldehyde). Catalytic data also reveal that oligomeric/polymeric tetrahedrally coordinated vanadium species exhibit higher activity in ethanol oxidative dehydrogenation than monomeric complexes. In addition, comparison of the catalytic performance of VO_x/Zr–SBA-15 catalysts with VO_x/SBA-15 catalysts showed that catalytic properties of VO_x/Zr–SBA-15 catalysts can be tuned by incorporation of controlled amount of zirconium into silica framework.     

Silicotungstic acid-derived WO3 composited with ZrO2 supported on SBA-15 as a highly efficient mesoporous solid acid catalyst for the alkenylation of p-xylene with phenylacetylene

Highly dispersed silicotungstic acid-derived WO₃ composited with ZrO₂ supported on SBA-15（WZ/SBA-15） as an ordered mesoporous solid acid catalyst was prepared via a facile incipient wetness impregnation（IWI） method that active ingredients,ZrO₂ and WO₃,were impregnated into the channels of SBA-15 simultaneously with a subsequent calcination process.The relationship between catalyst nature and performance was explored by high resolution transmission elec...     

负载型双噁唑啉催化剂上的不对称Diels-Alder反应

 分别以乙烷桥键磺酸官能化的有机-无机杂化介孔材料、十二钨磷酸铯、活化硅胶以及SBA-15为载体,通过非共价键作用制备了负载型双噁唑啉催化剂,并将该催化剂用于催化3-((E)-2-丁烯酰基)-1,3-噁唑啉-2-酮和环戊二烯的不对称Diels-Alder反应. 研究表明,催化剂的性能取决于载体本身以及载体表面阴离子的性质. 以SBA-15为载体时产物的对映体选择性较低,可归因于载体表面较低的羟基浓度.     

Mesoporous silica SBA-15, a new adsorbent for bioactive polyphenols from red wine

The aim of this paper is to evaluate the ability of the mesoporous silica SBA-15 to adsorb polyphenols from red wine. The mesoporous molecular sieve silica SBA-15 was hydrothermally synthesized in acidic media and characterized by SAXRD, BET, EDX and SEM. The adsorption behavior of mesoporous silica SBA-15 was investigated at 5 °C for 24 h using an adsorbent dose of 8 g SBA-15 L⁻¹ red wine. The total polyphenols content expressed as mg of gallic acid equivalents (GAE L⁻¹) was estimated from the standard curve of gallic acid (absorbance at 280 nm). HPLC chromatograms of methanolic extract from mesoporous SBA-15 at 256, 280, 324, and 365 nm exhibits the strong retention of quercetin and cis-resveratrol and a reasonable retention of trans-resveratrol, catechin, epicatechin, rutin, and phenolic acids (meta- and para-hydroxybenzoic, vanillic, caffeic, syringic, salicylic and para-coumaric acids).     

SBA-15负载纳米CoMoO4催化剂催化丙烷氧化脱氢制丙烯

采用柠檬酸配位-浸渍法制备不同CoMoO4含量的系列CoMoO4/SBA-15催化剂, 通过X射线衍射、透射电镜和低温N2吸附法对样品进行了表征. 结果表明, 柠檬酸配位-浸渍法可在介孔分子筛孔道中形成高含量、均匀分散且有确定晶相的CoMoO4, 同时能够很好地保持载体的介孔结构. 与非负载的CoMoO4相比, 由柠檬酸配位-浸渍法制备的CoMoO4/SBA-15催化剂在丙烷氧化脱氢反应中具有更好的催化活性, 当CoMoO4的含量为13%(w)、反应温度为823 K时, 丙烯产率达到16.8%.     

Readily accessible mesoporous silica nanoparticles supported chiral urea-amine bifunctional catalysts for enantioselective reactions

The main objective of this study is to develop readily accessible and recyclable solid catalysts for enantioselective reactions. To achieve this, magnetic MCM-41 and non-magnetic SBA-15 mesoporous supports were prepared, then mesoporous silica supported chiral urea-amine bifunctional catalysts were synthesized by grafting of chiral urea-amine ligand onto SBA-15 and magnetic MCM-41. The magnetic and non-magnetic supports and so-prepared solid catalysts were characterized by using different methods such as N₂ sorption measurements, Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscope-energy dispersive X-ray analysis (FESEM-EDX), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). Results showed that (1R, 2R) or (1S, 2S)-1,2-diphenylethane-1,2-diamine was successively immobilized onto magnetic MCM-41 and SBA-15 pores. The heterogeneous chiral solid catalysts and their homogenous counterparts exhibited high activities both enantioselective transfer hydrogenation reaction (up to 99% conversion and 65% ee) and enantioselective Michael reaction (up to 98% conversion and 26% ee). Moreover, the SBA-15 supported solid catalysts were separated from the reaction mixture by simple filtration, whereas the magnetic MCM-41 supported solid catalysts were separated by simple magnetic decantation and reused in three consecutive catalytic experiments.     

Characterization and acidic properties of Al-SBA-15 materials prepared by post-synthesis alumination of a low-cost ordered mesoporous silica

A series of Al-containing SBA-15 type materials with different Si/Al ratio, were prepared by post-synthesis modification of a pure highly ordered mesoporous silica SBA-15 obtained by using sodium silicate as silica source, and amphiphilic block copolymer as structure-directing agent. A high level of aluminum incorporation was achieved, reaching an Si/Al ratio of up to 5.5, without any significant loss in the textural properties of SBA-15. These materials were fully characterized by powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), ²⁷Al NMR spectroscopy, and N₂ adsorption at 77 K. The acid properties of these materials have been evaluated by NH₃-TPD, adsorption of pyridine and deuterated acetonitrile coupled to FTIR spectroscopy. The effective acidity of these materials was evaluated using two catalytic reactions: 2-propanol dehydrogenation and 1-butene isomerization. The adsorption of basic probe molecules and the catalytic behavior revealed an evolution of the acid properties with the Al content. These studies have shown that the Al-SBA-15 materials contain Brønsted and Lewis acid sites with medium acidity which makes them appropriate to be used as acid catalysts in heterogeneous catalysis, catalytic supports, and adsorbents.     

Robust hydrogen production from HCOOH over amino-modified KIT-6-confined PdIr alloy nanoparticles

Formic acid（FA）, which can be produced via CO2reduction and biomass conversion, has received extensive interest as a convenient and safe hydrogen carrier due to its wide range of sources, renewable,high hydrogen content（4.4 wt%）, and convenient storage/transportation. Designing highly efficient catalysts is the main challenge to realize the hydrogen production from FA. In this work, well-dispersed and electron-rich Pd Ir alloy nanoparticles with a size of 1.8 nm are confined in amino-modified 3D...     

Zr(SO4)2·4H2O/SBA-15固体酸催化剂的制备及其催化性能

以介孔分子筛SBA-15为载体,采用浸渍法制备了系列四水硫酸锆(ZS)负载型催化剂ZS/SBA-15,用FT-IR、EDS、XRD、N₂吸附-脱附、Hammett指示剂等对催化剂的组成、结构和酸强度进行了表征。 结果表明,硫酸锆负载后,催化剂仍基本保持六方有序的孔阵列和尺寸不变的介孔孔道;在负载量＜40%时,硫酸锆均能在载体上高度分散。 该系列催化剂具有中等强度的酸中心,对乙二醇单乙醚与乙酸、正丁醇与柠檬酸的酯化反应有很高的催化活性,且对目标酯产物的选择性为100%。 在最佳的负载量和反应条件下,乙二醇单乙醚和柠檬酸的转化率约高达98%,催化剂重复使用多次仍可保持相当的活性。     

Functionalized SBA-15 and its Catalytic Applications in Selective Organic Transformations

Ordered, mesoporous SBA-15 functionalized with organic and inorganic moieties exhibits efficient catalytic activity in a variety of organic transformations. In this account, reviewing our own work, three-sets of surface-modified SBA-15 materials have been investigated. The first-set of materials consists of SBA-15 modified with organo-acidic (propyl thiol and propyl sulfonic acid) and basic (propyl amine and propyl adenine) moieties. The second-set of materials was prepared by grafting Mn complexes to the organo-functionalized SBA-15. The third-set composes of nanocrystalline metal oxides supported on SBA-15. All these catalysts have been characterized by structural and spectroscopic techniques. Catalytic activities of the first-set of solid materials have been investigated in acid/base-catalyzed reactions viz., ring-opening of epoxides with amines (producing β-amino alcohols), esterification, three-component-Mannich reactions and cycloaddition of CO₂ to epoxides. The Mn complexes grafted on organofunctionalized SBA-15 are efficient catalysts for the chemo-, regio- and stereoselective aerial oxidation of monoterpenes at ambient conditions. TiO_x, VO_x, MoO_x and WO_x supported on SBA-15 catalyzed biomimetic oxyhalogenation of aromatic compounds. In all these reactions, the functionalized SBA-15 showed high selectivity.     

Reductive amination of cyclohexanol/cyclohexanone to cyclohexylamine using SBA-15 supported copper catalysts

Amination of cyclohexanol was investigated in vapour phase over copper catalysts supported on mesoporous SBA-15. The different products identified during reductive amination of cyclohexanol reaction were cyclohexanone, cyclohexylamine, along with small amounts of N-Cyclohexylidinecyclohexylamine and dicyclohexylamine. Among several catalysts tested for the reductive amination, 5% Cu supported on SBA-15 exhibited better catalytic performance than other catalysts with 36% selectivity towards cylclohexylamine at 80% cyclohexanol conversion. The optimum reaction conditions employed to achieve the best catalyst performance were at 250 °C, 0.1 MPa of H₂/NH₃, TOS-10h. The active Cu sites, acidity of the catalyst, and effect of reaction parameters play a pivotal role in the reductive amination reaction. The prepared catalysts were characterized by XRD, BET, SEM, H₂-TPR and NH₃-TPD. The dispersion of Cu, particle size, and metal surface area (m²/g) calculated from pulse N₂O decomposition method. TPR findings reveal the presence of substantially dispersed copper oxide species at lower loadings which is easily reducible than the bulk copper oxide species found at higher Cu loadings. The acidity measurements by NH₃-TPD analysis suggest that the maximum acidic strength was obtained at 5 wt% copper on porous SBA-15, and decreased with Cu loadings. The catalytic properties are well in agreement with the findings of catalysts characterization.     

Influence of the pore structure of MCM-41 and SBA-15 silica fibers on atomic layer chemical vapor deposition of cobalt carbonyl

Mesoporous high surface area MCM-41 and SBA-15 type silica materials with fibrous morphology were synthesized and used as support materials for the ALCVD (atomic layer chemical vapor deposition) preparation of Co/MCM-41 and Co/SBA-15 catalysts. Co/MCM-41 and Co/SBA-15 catalysts were prepared by deposition of Co2(CO)8 from the gas phase onto the surfaces of preheated support materials in a fluidized bed reactor. For both silica materials, two different kinds of preparation methods, direct deposition and a pulse deposition method, were used. Pure silica supports as well as supported cobalt catalysts were characterized by various spectroscopic (IR) and analytical (X-ray diffraction, Brunauer-Emmett-Teller, elemental analysis) methods. MCM-41 and SBA-15 fibers showed considerable ability to adsorb Co2(CO)8 from the gas phase. For MCM-41 and SBA-15 silicas, cobalt loadings of 13.7 and 12.1 wt % were obtained using the direct deposition method. The cobalt loadings increased to 23.0 and 20.7 wt % for MCM-41 and SBA-15 silicas, respectively, when the pulse deposition method was used. The reduction behavior of silica-supported cobalt catalysts was found to depend on the catalyst preparation method and on the mesoporous structure of the support material. Almost identical reduction properties of SBA-15-supported catalysts prepared by different deposition methods are explained by the structural properties of the mesoporous support and, in particular, by the chemical structure of the inner surfaces and walls of the mesopores. Pulse O2/H2 chemisorption experiments showed catalytically promising redox properties and surface stability of the prepared MCM-41- and SBA-15-supported cobalt catalysts.