Nanoparticle Dispersion and Glass Transition Behavior of Polyimide-grafted Silica Nanocomposites

How to control the spatial distribution of nanoparticles to meet different performance requirements is a constant challenge in the field of polymer nanocomposites.Current studies have been focused on the flexible polymer chain systems.In this study,the rigid polyimide(PI) chain grafted silica particles with different grafting chain lengths and grafting densities were prepared by "grafting to" method,and the influence of polymerization degree of grafted chains(N),matrix chains(P),and grafting density(a) on the spatial distribution of nanoparticles in the PI matrix was explored.The glass transition temperature(Tg) of PI composites was systematically investigated as well.The results show that silica particles are well dispersed in polyamic acid composite systems,while aggregation and small clusters appear in PI nanocomposites after thermal imidization.Besides,the particle size has no impact on the spatial distribution of nanoparticles.When σ·N0.5<<(N/P)2,the grafted and matrix chains interpenetrate,and the frictional resistance of the segment increases,resulting in restricted relaxation kinetics and Tg increase of the PI composite system.In addition,smaller particle size and longer grafted chains are beneficial to improving Tg of composites These results are all propitious to complete the microstructure control theory of nanocomposites and make a theoretical foundation for the high performance and multi-function of PI nanocomposites.     

Polymer-clay nanocomposites: chemical grafting of polystyrene onto Cloisite 20A

An account of the experiments on preparing polystyrene(PS) nanocomposites through grafting the polymer onto organophilic montmorillonite is reported.Cloisite 20A was reacted with vinyltrichlorosilane to replace the edge hydroxyl groups of the clay with a vinyl moiety.Because the reaction may liberate HC1,it was performed in the presence of sodium hydrogencarbonate to prevent the exchange of quaternary alkylammonium cations with H~+ ions.Only the silanol groups on the edge of the clay react with vinyltrichlorosilane.The radical polymerization of the product with styrene as a vinyl monomer leads to chemical grafting of PS onto the montmorillonite surface.The homopolymer formed during polymerization was separated from the grafted organoclay by Soxhlet extraction.Chemical grafting of the polymer onto Cloisite 20A was confirmed by infrared spectroscopy.The prepared nanocomposite materials and the grafted nano-particles were studied by XRD.Exfoliated nanocomposites may be obtained for 0.5 wt%-l wt%clay content.The nanocomposites were studied by thermogravimertic analysis(TGA) dynamic thermal analysis(DTA) and dynamic mechanical analysis (DMTA).     

Synthesis and Characterization of a Novel Biomaterial： Maleic Anhydride-modified Poly（dl-lactic acid）

A novel modified poly(dl-lactic acid) (PDLLA) was obtained by covalently grafting of maleic anhydride onto the backbone of PDLLA, attempting to improve PDLLA‘s hydrophilicity and cell affinity and to provide reactive groups for further chemical modification. FTIR, ^13 C NMR and DSC were used to characterize the maleic anhydride-modified PDLLA.     

Preparation of LLDPE/MgAl-LDH Exfoliation Nanocomposites with Enhanced Thermal Properties by Melt Intercalation

The interlayer surface of MgAl layered double hydroxide(MgAl-LDH)was modified by exchanging about halfof the interlayer nitrate anions by dodecyl sulfate anions(DS)to get MgAl(H-DS)LDH,and then the MgAl(H-DS)was melt intercalated by LLDPE to get the LLDPE/MgAl-LDH exfoliation nanocomposites.The samples werecharacterized by Fourier transform infrared(FTIR)spectroscopy,X-ray diffraction(XRD),ion chromatography,transmission electron microscopy(TEM),and thermogravimetry analysis(TGA).The nanoscale dispersion ofMgAl-LDH layers in the LLDPE matrix was verified by the disappearance of(001)XRD reflection of the modifiedMgAl-LDH and by the TEM observation.The TGA profiles of LLDPE/MgAl-LDH nanocomposites show a fastercharring process between 210 and 370℃ and a higher thermal stability above 370℃ than LLDPE.The decomposi-tion temperature of the nanocomposites with 10 wt% MgAl(H-DS)can be 42℃ higher than that of LLDPE at 40%weight loss.     

Nonisothermal crystallization and morphology of poly(butylene succinate)/layered double hydroxide nanocomposites

Biodegradable poly(butylene succinate) (PBS) and layered double hydroxide (LDH) nanocomposites were prepared via melt blending in a twin-screw extruder. The morphology and dispersion of LDH nanoparticles within PBS matrix were characterized by transmission electron microscopy (TEM), which showed that LDH nanoparticles were found to be well distributed at the nanometer level. The nonisothermal crystallization behavior of nanocomposites was extensively studied using differential scanning calorimetry (DSC) technique at various cooling rates. The crystallization rate of PBS was accelerated by the addition of LDH due to its heterogeneous nucleation effect; however, the crystallization mechanism and crystal structure of PBS remained almost unchanged. In kinetics analysis of nonisothermal crystallization, the Ozawa approach failed to describe the crystallization behavior of PBS/LDH nanocomposites, whereas both the modified Avrami model and the Mo method well represented the crystallization behavior of nanocomposites. The effective activation energy was estimated as a function of the relative degree of crystallinity using the isoconversional analysis. The subsequent melting behavior of PBS and PBS/LDH nanocomposites was observed to be dependent on the cooling rate. The POM showed that the small and less perfect crystals were formed in nanocomposites.     

Novel Conductive PANI/Hydrophilic Thiacalix[4]areneNanocomposites: Synthesis,Characterization andInvestigation of Properties简

Nanocomposites of polyaniline(PANI) and the macrocycle thiacalix[4]arene tetra sulfonate(TCAS) were successfully synthesized in feed ratios of 1:0.25, 1:0.50 and 1:0.75 by three prevail synthetic methods, i.e. in situ polymerization, emulsion polymerization and solution casting technique. The structures of the nanocomposites were confirmed by FTIR, UV-Vis, XRD, SEM, and TEM techniques. The conductivity was measured by a four probe method. The conductivity was recorded to be as high as 105 × 10 2S cm 1for the nanocomposite with a nanometer size structure and homogeneously distributed morphology. The electroactivity of the nanocomposites was approved by cyclic voltammetry(CV) and impedance spectroscopy technique(EIS). The antioxidant ability and thermal property of the composites were further studied. Preliminary studies have evidenced the production of conductive nanocomposites with good thermal property and relatively good solubility in N-methyl 2-pyrrolidone(NMP), with the antioxidant activity reaching up to 80%.     

Synthesis of membrane adsorbers via surface initiated ATRP of 2-dimethylaminoethyl methacrylate from microporous PVDF membranes

Surface-initiated atom transfer radical polymerization(SI-ATRP) was used to tether poly(2-dimethylaminoethyl methacrylate)(PDMAEMA) onto microporous PVDF membranes in order to synthesize membrane adsorbers for protein adsorption. The alkaline treatment and bromine addition reaction were used to anchor ATRP initiators on membrane surface. Then PDMAEMA was grafted from the membrane surface via SI-ATRP. Fourier transform infrared spectroscopy(FTIR), X-ray photoelectron spectroscopy(XPS) and scanning electron microscopy(SEM) revealed the chemical composition and surface topography of the PVDF-g-PDMAEMA membrane surfaces. These results showed that PDMAEMA was grafted from the membrane surface successfully and a grafting yield as high as 1500 μg/cm2 was achieved. The effects of the grafting time and the density of initiators on the static and dynamic binding capacity of bovine serum albumin(BSA) were systematically investigated. Both the static and dynamic binding capacities increase with the bromination and polymerization time. However, the benefits of the initiator density on binding capacities are limited by the graft density of PDMAEMA chains.     

Structure Characterization and Thermal Properties of PMMA／Montmorillonite Nanocomposites via Emulsion Polymerization

Montmorillonite(MMT) modified with sodium silicate can change the arrangement of its layers fromedge-face and edge-edge to face-face. With the fine dispersion of the modified MMT in water, the cation-ex-change reaction was carried out with cetyltrimethyl ammonium bromide (CTAB) to obtain organo-montmoril-lonite (OMMT). As OMMT was uniformly dispersed in methyl methacrylate (MMA) monomer, PMMA/OMMT nanocomposites were formed via a common emulsion polymerization. The products were extractedwith hot acetone and characterized by FTIR, molecular weight, X-ray diffraction(XRD), transmission elec-tron microscopy(TEM), DSC and TGA. These results show that most of the OMMT layers have been exfo-liated, while the thermal stability is increased obviously. By means of FTIR spectral analysis, the ratios ofthe macromolecular radicals‘ termination of disproportionation patterns to combination are increased with theaddition of OMMT. This result further confirms the increase of the thermal degradation temperatures andglass transition temperatures of the PMMA/OMMT nanocomposites.     

Functionalization of nanodiamond with epoxy monomer

A novel nanodiamond-epoxy derivative(ND-EP) was synthesized by grafting epoxy monomers onto the surface of nanodiamond(ND),and characterized by FTIR and TGA.The ratio of grafted epoxy groups was determined to be 32.5 wt% by TGA.The developed methodology provides an efficient method for the functionalization of nanodiamond material,which enables a variety of advanced engineering and biomedical applications of ND.     

PREPARATION OF POLY（METHYL METHACRYLATE）/LAYERED DOUBLE HYDROXIDES NANOCOMPOSITES via in situ SOLUTION POLYMERIZATION

An exfoliated layered double hydroxides/poly(methyl methacrylate)(LDHs/PMMA)nanocomposite was prepared by in situ solution polymerization of methyl methacrylate(MMA)in the presence of 4-vinylbenzenesulfonate intercalated LDHs(MgAl-VBS LDHs).MgAl-VBS LDHs was prepared by the ion exchange method,and the structure and composition of the MgA1-VBS LDHs were determined by X-ray diffraction(XRD),infrared spectroscopy and elemental analysis.XRD and transmission electron microscopy(TEM)were employed to examine the structure of LDHs/PMMA nanocomposite.It was indicated that the LDHs layers were well exfoliated and dispersed in the PMMA matrix.The grafting of PMMA onto LDHs was confirmed by the extraction result and the weight fraction of grafted PMMA increased as the weight fraction of LDHs in the nanocomposites increased.     

聚酰胺-胺树状分子接枝到方法修饰多壁碳纳米管

采用聚酰胺-胺树状分子(PAMAM)“接枝到”这一温和而简单易行的方法修饰多壁碳纳米管(MWCNTs),制备了一种树状分子/碳纳米管(MWCNTs-g-PAMAM)纳米复合材料。在水、甲醇和乙醇等极性溶剂中,该复合材料具有很好的分散性。通过傅立叶变换红外光谱(FTIR)、X-射线光电子能谱(XPS)、热重分析(TGA)和透射电子显微镜(TEM)等对MWCNTs-g-PAMAM纳米复合材料进行了表征。FTIR表明接枝修饰是PAMAM与MWCNTs的共价键结合,TGA数据表明PAMAM成功修饰于MWCNTs侧壁,且接枝到MWCNTs上PAMAM的量随其代数(G1.0～G4.0)的不同而不同,具体顺序为G2.0＞G1.0≈G3.0＞G4.0.     

Properties of matrix-grafted multi-walled carbon nanotube/poly(methyl methacrylate) nanocomposites synthesized by in situ reversible addition-fragmentation chain transfer polymerization

Multi-walled carbon nanotubes (MWCNT)/poly(methyl methacrylate) (PMMA) nanocomposites were synthesized by the in situ reversible addition-fragmentation chain transfer (RAFT) polymerization of methyl methacrylate (MMA) in the presence of MWCNTs, at which the bulk polymer was grafted onto the surface of nanotubes through the ??grafting through?? strategy. For this purpose, MWCNTs were formerly functionalized with polymerizable MMA groups. MMA and PMMA-grafted MWCNTs were characterized by Fourier-transform infrared spectroscopy, Raman, X-ray photoelectron spectroscopy, transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). Dissolution of nanotubes was examined in chloroform solvent and studied by UV?Cvis spectroscopy. Thermogravimetric and degradation behavior of prepared nanocomposites was investigated by TGA. MWCNTs had a noticeable boosting effect on the thermal stability of nanocomposites. TGA thermograms showed a two-step weight loss pattern for the degradation of MWCNT-PMMA/PMMA nanocomposites which is contrast with neat PMMA. Introduction of MWCNTs also improved the dynamic mechanical behavior and electrical conductivity of nanocomposites. TEM micrograph of nanocomposite revealed that the applied methods for functionalization of nanotubes and in situ synthesis of nanocomposites were comparatively successful in dispersing the MWCNTs in PMMA matrix.     

Preparation and Characteration of UV-cured EA/MMT Nanocomposites Via In-Situ Polymerization

A long-chain surfactant, enzoylbenzyl-N,N-dimethyl-N-octadecylammonium bromide (BDOB) with a benzophenone group, was synthesized to modify the montmorillonites (MMT) for the preparation of nanocomposites via photo-induced polymerization. The BDOB-modified MMT was characterized by the fourier transform infrared spectrometer (FTIR), thermal gravimetric analyzer (TGA) and X-ray diffraction (XRD), and the results of XRD indicated that the intercalated structures of BDOB-modified MMT was obtained. The conversion of the bisphenol A epoxy diacrylate (EA) was quantified by the FTIR, and the results indicated that conversion increased with an increase in the amount of BDOB-modified MMT. The morphologies of the UV-cured EA/MMT nanocomposites prepared from this organically modified MMT were studied by means of XRD and TEM, and the results showed that all the samples contained an intercalated structure with partial exfoliated structure. The results of TGA and mechanical properties also indicated that the thermal and mechanical properties of UV-cured nanocomposites were significantly enhanced due to the presence of the long chain surfactant organically modified MMT.     

Matrix‐grafted multiwalled carbon nanotubes/poly(methyl methacrylate) nanocomposites synthesized by in situ RAFT polymerization: A kinetic study

A new approach was developed to functionalize multiwalled carbon nanotubes (MWCNTs) with a polymerizable methyl methacrylate (MMA) groups, and the structure of functionalized MWCNTs were characterized by FTIR, Raman, XPS, and TEM. Using the strategy of “grafting through,” poly(methyl methacrylate) (PMMA) chains were grafted onto the surface of MWCNTs during the in situ synthesis of MWCNT/PMMA nanocomposites over reversible addition‐fragmentation chain transfer (RAFT) polymerization. Kinetics of RAFT‐mediated polymerization of MMA in the presence of MMA‐grafted MWCNTs was studied by using gas chromatography and gel permeation chromatography. To further study, attached polymers were detached and their molecular characteristics were compared to freely formed chains. Results of kinetic studies showed that the utilized commercial chain transfer agent strictly reduced the rate of polymerization as well as relatively controlled molecular weights and narrow molecular weight distributions of free chains. MWCNTs showed a radical activity, retarding the polymerization and reducing the rate of reaction. The effect of MWCNTs concentrations on molecular weights and polydispersity indexes (PDI) was different at the surface and in the bulk. The molecular weights of free chains increased, and the PDI was decreased with increasing MWCNTs. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 555–569, 2012     

Investigation of structural,rheological and thermal properties of PMMA/ONi-Al LDH nanocomposites synthesized <Emphasis Type="Italic">via</Emphasis> solvent blending method: Effect of LDH loading

This article addresses the synthesis of organically tailored Ni-Al layered double hydroxide (ONi-Al LDH) and its use in the fabrication of exfoliated poly(methyl methacrylate) (PMMA) nanocomposites. The pristine Ni-Al LDH was initially synthesized by co-precipitation method and subsequently modified using sodium dodecyl sulfate to obtain ONi-Al LDH. Nanocomposites of PMMA containing various amounts of modified Ni-Al LDH (3 wt%-7 wt%) were synthesized via solvent blending method to investigate the influence of LDH content on the properties of PMMA matrix. Several characterization methods such as X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), rheological analysis, differential scanning calorimetry (DSC) and thermo gravimetric analysis (TGA), were employed to examine the structural, viscoelastic and thermal properties of PMMA/OLDH nanocomposites. The results of XRD and TEM examination confirm the formation of partially exfoliated PMMA/OLDH nanocomposites. The FTIR results elucidate that the characteristic bands for both pure PMMA and modified LDH are present in the spectra of PMMA/OLDH nanocomposites. Rheological analyses were carried out to examine the adhesion between polymer matrix and fillers present in the nanocomposite sample. The TGA data indicate that the PMMA nanocomposites exhibit higher thermal stability when compared to pure PMMA. The thermal decomposition temperature of PMMA/OLDH nanocomposites increases by 28 K compared to that of pure PMMA at 15% weight loss as a point of reference. In comparison with pure PMMA, the PMMA nanocomposite containing 7 wt% LDH demonstrates improved glass transition temperature (T _g) of around 3 K. The activation energy (E _a), reaction orders (n) and reaction mechanism of thermal degradation of PMMA/OLDH nanocomposites were evaluated using different kinetic models. Water uptake capacity of the PMMA/OLDH nanocomposites is less than that of the pure PMMA.     

Synthesis of Pt and Pt-Fe nanoparticles supported on MWCNTs used as electrocatalysts in the methanol oxidation reaction

This work reports a feasible synthesis of highly-dispersed Pt and Pt-Fe nanoparticles supported on multiwall carbon nanotubes （MWCNTs） without Fe and multiwall carbon nanotubes with iron （MWCNTs-Fe） which applied as electrocatalysts for methanol electrooxidation. A Pt coordination complex salt was synthesized in an aqueous solution and it was used as precursor to prepare Pt/MWCNTs, Pt/MWCNTs-Fe, and Pt-Fe/MWCNTs using FeC12.4H20 as iron source which were named S 1, S2 and S3, respectively. The coordination complex of platinum （TOA）2PtC16 was obtained by the chemical reaction between （NH4）2PtC16 with tetraoctylammonium bromide （TOAB） and it was characterized by FT-IR and TGA. The materials were characterized by Raman spectroscopy, SEM, EDS, XRD, TEM and TGA. The electrocatalytic activity of Pt-based supported on MWCNTs in the methanol oxidation was investigated by cyclic voltammetry （CV） and chronoamperometry （CA）. Pt-Fe/MWCNTs electrocatalysts showed the highest electrocatalytic activity and stability among the tested electrocatalysts due to that the addition of ＂Fe＂ promotes the OH species adsorption on the electrocatalyst surface at low potentials, thus, enhancing the activity toward the methanol oxidation reaction （MOR）.     

Influence of MWCNT morphology on dispersion and thermal properties of polyethylene nanocomposites

In this study a series of multi-walled carbon nanotube (MWCNT)/Polyethylene (PE) composites with different kinds and several concentrations of carbon nanotubes (CNTs) were investigated. The morphology and degree of dispersion of the fillers in the polymer matrix at different length scales was investigated using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Both individual and agglomerated MWCNTs were evident but a good dispersion was observed for some of them. TGA measurements were performed on nanocomposites in order to understand if CNTs affect the stabilization mechanism during thermal and oxidative degradation. The analysis demonstrates that MWCNTs presence slightly delays thermal volatilisation (15-20 °C) without modification of thermal degradation mechanism. In contrast, thermal oxidative degradation in air is delayed up to about 100 °C dependently from MWCNTs concentration, in the range used here (0.1-2.0 wt%), and degree of dispersion. The stabilization is due to the formation of a thin protective layer of entangled MWCNTs kept together by carbon char generated on the surface of the nanocomposites as shown by SEM images taken on degradation residues.     

Thermal curing behavior of MWCNT modified vinyl ester‐polyester resin suspensions prepared with 3‐roll milling technique

This study aims to investigate the curing behavior of a vinyl ester‐polyester resin suspensions containing 0.3 wt % of multiwalled carbon nanotubes with and without amine functional groups (MWCNTs and MWCNT‐NH₂). For this purpose, various analytical techniques, including Differential Scanning Calorimetry (DSC), Fourier infrared spectroscopy (FTIR), Raman Spectroscopy, and Thermo Gravimetric Analyzer (TGA) were conducted. The resin suspensions with carbon nanotubes (CNTs) were prepared via 3‐roll milling technique. DSC measurements showed that resin suspensions containing CNTs exhibited higher heat of cure (Q), besides lower activation energy (E_a) when compared with neat resin. For the sake of simplicity of interpretation, FTIR investigations were performed on neat vinyl ester resin suspensions containing the same amount of CNTs as resin. As a result, the individual fractional conversion rates of styrene and vinyl ester were interestingly found to be altered dependent on MWCNTs and MWCNT‐NH₂. The findings obtained from RS measurements of the cured samples are highly proportional to those obtained from FTIR measurements. TGA measurements revealed that CNT modified nanocomposites have higher activation energy of degradation (E_d) compared with the cured polymer. The findings obtained revealed that CNTs with and without amine functional groups alter overall thermal curing response of the surrounding matrix resin, which may probably impart distinctive characteristics to mechanical behavior of the corresponding nanocomposites achieved. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1511–1522, 2009     

用可聚合的眯唑型表面活性剂制备聚苯乙烯／粘土纳米复合材料

用本体聚合法制备了聚苯乙烯／粘土纳米复合材料,用傅里叶红外光谱（FTLR）对有机改性的蒙脱土进行了表征,用X-射线衍射（XRD）表征了纳米复合材料的结构,用热重分析（TGA）、微分热分析（DTA）表征了纳米复合材料的热稳定性。结果表明,聚苯乙烯可以插入含双键的咪唑盐表面活性剂改性的粘土中,形成部分剥离的结构;复合材料的热稳定性较高,开始分解的温度达到414．6℃。     

Enhanced oxygen reduction at Pd catalytic nanoparticles dispersed onto heteropolytungstate-assembled poly(diallyldimethylammonium)-functionalized carbon nanotubes

Both Keggin-type phosphotungstic acid (HPW) and Pd are not prominent catalysts towards the oxygen reduction (ORR), but their composite Pd-HPW catalyst produces a significantly higher electrochemical activity for the ORR in acidic media. The novel composite catalyst was synthesized by self-assembly of HPW on multi-walled carbon nanotubes (MWCNTs) via the electrostatic attraction between negatively charged HPW and positively charged poly(diallyldimethylammonium (PDDA)-wrapped MWCNTs, followed by dispersion of Pd nanoparticles onto the HPW-PDDA-MWCNT assembly. The as-prepared catalyst was characterized by transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, thermal gravimetric analysis (TGA), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). TEM images show that Pd nanoparticles were uniformly dispersed on the surface of MWCNTs even when the Pd loading was increased to 60 wt%. Electrochemical activity of the catalysts for the ORR was evaluated by steady state polarization measurements using a rotating disk electrode. Compared with the acid treated MWCNTs, Pd nanoparticles supported on the HPW-assembled MWCNTs show a much higher ORR activity that is comparable to conventional Pt/C catalysts. The high electrocatalytic activities could be related to high dispersion of Pd nanoparticles as well as synergistic effects originating from the high proton conductivity of HPW. The Pd/HPW-PDDA-MWCNTs system as the cathode catalyst in proton exchange membrane fuel cells is demonstrated.