ORDERED STRUCTURAL EVOLUTION AND RELAXATION BEHAVIORS OF A SERIES MICROPHASE SEPARATED "HAIRY-ROD" POLYIMIDES WITH MULTIPLE ALKYL SIDE CHAINS

A series of "hairy-rod" polyimides, BBPA(n), with multiple alkyl side chains was prepared from 3,3′,4,4′biphenyltetracarboxylic dianhydride (BPDA) and 4,4′-biphenyldiamine substituted in the 2,2′-positions with benzoate, which was substituted in the 3,4,5-positions with ether side chains of varying lengths. The number of the methylene units, n, in these alkyl side chains were in even numbers ranging from 8 to 18. Combining techniques of one-dimensional (1D) and 2D wide angle x-ray diffraction, 1D small angle X-ray scattering, differential scanning calorimetry experiments, it was found that this series of "hairy-rod" polyimides possess a micro-phase separation between the backbones and side chains. This led to the formation of ordered structures in two different lengthscales, of which both are hexagonal packing: one is attributed to the alkyl side chains on the sub-nanometer scale, and another is for the whole polymer chains on the nanometer scale. The development of the hexagonal structure on the sub-nanometer scale was critically dependent upon the lengths of the alkyl side chains. Three relaxation processes were captured by dynamic mechanical analysis, i.e., segmental motion of the backbones, α, the melting of the side chain crystals, β1, which exits only for the materials with longer side chains (n = 18,16); and the subglass relaxation of side chains,β2. The peak relaxation temperature of the α process decreased with increasing the length of side chains, while the one of theβ2 process increased. The activation energy of the αrelaxation was relatively independent on the length of side chain, whereas, β2 process showed the increasing of activation energy with increasing the length of side chains.     

High-performance fullerene-free polymer solar cells with solution-processed conjugated polymers as anode interfacial layer

A series of conjugated polymers based on PFS derivatives with π-conjugated 5-(9H-fluoren-2-yl)-2,2′-bithiophene(fluorene-alt-bithiophene) backbones, namely PFS-3C, PFS-4C and PFS-6C, were synthesized for their use as the anode interfacial layers(AILs) in the efficient fullerene-free polymer solar cells(PSCs). Alkyl sulfonate pendants with different lengths of alkyl side chains were introduced in the three polymers in order to investigate the effect of the alkyl chain length on the anode modification. The obtained three polymers exhibited similar absorption bands and energy levels, indicating that changing the length of the alkyl side chains did not affect the optoelectronic properties of the conjugated polymers. Based on the PBDB-T:ITIC active layer, we fabricated the fullerene-free PSCs using the three polymers as the AILs. The superior performance of the fullerene-free PSC device was achieved when PFS-4C was used as the AIL, showing a power conversion efficiency(PCE) of 10.54%. The high performance of the PFS-4C-modified device could be ascribed to the high transmittance, suitable work-function(WF) and smooth surface of PFS-4C. To the best of our knowledge, the PCE obtained in the PFS-4C-modified device is among the highest PCE values in the fullerene-free PSCs at present. These results demonstrate that the PFS derivatives are promising candidates in serving as the AIL materials for high-performance fullerene-free PSCs.     

Changes of the Molecular Mobility of Poly(<Emphasis Type="Italic">ε</Emphasis>-caprolactone) upon Drawing,Studied by Dielectric Relaxation Spectroscopy

Dielectric relaxation spectroscopy (DRS) of poly(ε-caprolactone) with different draw ratios showed that the mobility of polymer chains in the amorphous part decreases as the draw ratio increases.The activation energy of the α process,which corresponds to the dynamic glass transition,increases upon drawing.The enlarged gap between the activation energies of the αprocess and the β process results in a change of continuity at the crossover between the high temperature a process and the α and β processes.At low drawing ratios the a process connects with the βprocess,while at the highest drawing ratio in our measurements,the a process is continuous with the a process.This is consistent with X-ray diffraction results that indicate that upon drawing the polymer chains in the amorphous part align and densify upon drawing.As the draw ratio increases,the α relaxation broadens and decreases its intensity,indicating an increasing heterogeneity.We observed slope changes in the α traces,when the temperature decreases below that at which τα ≈ 1 s.This may indicate the glass transition from the ‘rubbery’ state to the non-equilibrium glassy state.     

Changes of the Molecular Mobility of Poly(ε-caprolactone) upon Drawing,Studied by Dielectric Relaxation Spectroscopy

Dielectric relaxation spectroscopy(DRS) of poly(ε-caprolactone) with different draw ratios showed that the mobility of polymer chains in the amorphous part decreases as the draw ratio increases. The activation energy of the α process, which corresponds to the dynamic glass transition, increases upon drawing. The enlarged gap between the activation energies of the α process and the β process results in a change of continuity at the crossover between the high temperature a process and the α and β processes. At low drawing ratios the a process connects with the β process, while at the highest drawing ratio in our measurements, the a process is continuous with the αprocess. This is consistent with X-ray diffraction results that indicate that upon drawing the polymer chains in the amorphous part align and densify upon drawing. As the draw ratio increases, the α relaxation broadens and decreases its intensity, indicating an increasing heterogeneity. We observed slope changes in the α traces, when the temperature decreases below that at which τα≈ 1 s. This may indicate the glass transition from the ‘rubbery' state to the non-equilibrium glassy state.     

Fine-tuning of polymer photovoltaic properties by the length of alkyl side chains

This paper reports the synthesis and characteristics of a series of alkyl-substituted planar polymers. The physical properties are carefully tuned to optimize their photovoltaic performance. Depending on the length of soluble alkyl side chains which modify the structural order and orientation substantially in polymer backbones, the device performance can be improved significantly. The tuning of HOMO energy levels optimized polymers’ spectral coverage of absorption and their hole mobility, as well as miscibility with fullerene; all these efforts enhanced polymer solar cell performances. The shortcircuit current, Jsc for polymer solar cells was increased by adjusting polymer chain packing ability. It was found that films with well distributed polymer/fullerene interpenetrating network exhibit improved solar cell conversion efficiency. Enhanced efficiency up to 5.8% has been demonstrated. The results provide important insights about the roles of flexile chains in structure-property relationship for the design of new polymers to be used in high efficient solar cells.     

Effects of Branches on the Crystallization Kinetics of Polypropylene-g- Polystyrene and Polypropylene-g-Poly（n-butyl acrylate） Graft Copolymers with Well-defined Molecular Structures

Effects of branches on the crystallization kinetics of polypropylene-g-polystyrene(PP-g-PS) and polypropylene-gpoly(n-butyl acrylate)(PP-g-PnBA) graft copolymers with well-defined molecular structures were systematically investigated by DSC.The Avrami equation was used to analyze the isothermal crystallization process,while the analysis of nonisothermal crystallization process was based on the Jeziorny-modified Avrami model and Mo model.The kinetics results of isothermal and nonisothermal crystallization verified the peculiar effects of branches on the crystallization process of PP backbones in PP-g-PS and PP-g-PnBA graft copolymers:on one hand,the interaction between branches(π-π interaction between PS branches,or dipole-dipole interaction between PnBA branches) restrained the mobility and reptation ability of the PP backbones,which hindered the crystallization process;on the other hand,the heterogeneous nucleation effect resulting from the branched structure and fluctuation-assisted nucleation mechanism(caused by microphase separation between the PS or PnBA rich phase and the PP rich phase) became more pronounced with increasing branch length,which facilitated the crystallization process.     

Synthesis of novel aromatic polyimides containing bulky side chain for vertical alignment liquid crystals

In this study, a novel 4-（4-octyloxybenzoyloxy）biphenyl-3′,5′-diaminobenzoate and polyimides based on it were synthesized. The polyimide with mesogenic unit side chain exhibited excellent vertical alignment for nematic liquid crystal （LC）. The pretilt angles of LCs above 89° were kept after the rubbing process with 220 mm rubbing strength. The polyimide films as the alignment layer were baked at 120℃ for 12 h, the vertical alignment of LCs was still uniform and stable. Meanwhile, the UV-vis spectra of the noyel polyimide films showed the high transparency in a visible wave length.     

Dynamic Properties of Polyampholyte Hydrogel Elucidated by Proton NMR Spin-spin Relaxation Time

1H spin-spin relaxation time（T2） measurement of polyampholyte hydrogel poly（methylacrylic acidacryloyloxyethyl trimethylammonium chloride）[P（MA-DAC）] in different pH, ionic strength and temperature was carried out to reveal the molecular mobility. Spontaneous volume transition of the polyampholyte hydrogel was also investigated by spin-spin relaxation time measurement. Meanwhile T2 and the proton component fraction were acquired to study the swelling behaviour of the hydrogel. Moreover the changes of T2 characterized the molecular mo- bility of polyampholyte hydrogel in various swelling states. And the results suggest that the mobility of the main chains and a few free side chains（the long T2） of P（MA-DAC） was dominated by the mesh size in the hydrogel net- work, depending on the swelling ratio（Q） and the mobility of the side chains（the short T2） was influenced by electrostatic interaction between different charges in polymer side chains. Finally the T2 measurements of P（MA-DAC） hydrogel in the spontaneous swelling-deswelling process demonstrated the electrostatic interaction of the charged side chains caused deswelling behavior. At the same time, the mobility state transition temperature of the charged side chains was also studied by the lH spin-spin relaxation time measurements, and the transition activation energy of the side chains is 2.72 kJ.     

Study on the alkylation reaction of guanine and N-acetylguanine and the synthesis of 1''''-C alkylated carba-DHPG analogues

The alkylation reaction of guanine and N-acetylguanine with model compounds such as isopropyl bromide or 4-heptyl tosylate were studied. The reaction conditions such as temperature, solvent, base, and catalyst were examined for their effects on the reaction rate, and the yield and regioselectivity of the coupling reaction. The highest yield was obtained by using DMSO as the solvent. The reaction proceeded in a homogenous manner to give higher yield of 9-N and 7-N substituted product in a mole ratio of 1:1. The ratio could be raised to 2:1 if dibenzo-18-crown-6 was used as a catalyst. Using the above procedure, three carba-DHPG analogues bearing different 1'-C alkyl side chains were synthesized.     

Electrostatic interaction mechanism on the separation of phenols by non-aqueous capillary electrophoresis

The electrostatic interaction between additive and analyte is of great importance to non-aqueous cap- illary electrophoresis(NACE)separation.Three tetraalkylammonium bromides and acetonitrile were applied as additives and running solvent respectively.The effect of alkyl chain length and concentra- tion of additive on electrostatic interactions was investigated by the separation of phenols.The sepa- ration ability was found to increase with decreasing alkyl chain length of the additive,and the resolu- tion values were increased with increasing additive concentration.The separation was seriously dete- riorated after a little amount of water was added in the running solution.Furthermore,the electrostatic interaction is strong under the conditions of low electron cloud density,weak steric hindrance and multi-interaction sites.Thus,the separation result can be predicted by theoretical analysis,which is helpful for the separation of other substances in NACE based on electrostatic interaction.     

Graft polymerization of 2-hydroxyethyl methacrylate via ATRP with poly(acrylonitrile-co-p-chloromethyl styrene) as a macroinitiator

Amphiphilic graft copolymers are excellent additives for the development of antifouling membranes by nonsolvent induced phase separation. We report a convenient approach to the synthesis of novel graft copolymers with hydrophobic polyacrylonitrile (PAN) backbones and hydrophilic poly(2-hydroxyethyl methacrylate) (PHEMA) side chains. Atom transfer radical polymerization (ATRP) of 2-hydroxyethyl methacrylate was carried out with poly(acrylonitrile-co-p-chloromethyl styrene) (PAN-co-PCMS) as a macroinitiator in the presence of CuCl/2,2’-bipyridine at 50 °C in dimethyl sulfoxide. Kinetics of the graft polymerization was also evaluated. The synthesis of poly(acrylonitrile-co-p-chloromethyl styrene-g-2-hydroxyethyl methacrylate) (PAN-co-(PCMS-g-PHEMA)) can be relatively controlled when CMS (the ATRP sites) unit in the macroinitiator is around 5 mol%. Both the macroinitiators and graft copolymers were characterized by FTIR, NMR and GPC. The surface morphology and wettability of the copolymer films were studied by AFM and water contact angle measurement, respectively. We demonstrate that phase segregation between the PAN-co-PCMS backbones and the PHEMA side chains takes place and the surface hydrophilicity of the graft copolymers increases with the length of the PHEMA side chains. Because these amphiphilic graft copolymers can be synthesized in mass, they will be useful as latent additives for the fabrication of advanced PAN separation membranes.     

Investigation on the Coordination Mode of IL-Supported Diols Used as Phosphine-Free Ligands for Palladium Catalyzed Heck Reaction

The coordination mode of IL-supported diols used as phosphine-free ligands for palladium catalyzed Heck reaction has been investigated by tuning their compositions. The difference in coordination of these IL-supported diols with metal Pd in Heck reaction was related to the changes of the cation rings, leading to the different activities of Pd catalyst in the reaction. The experimental results indicated that the activities of Pd catalyst were affected mainly by n-electron density of the cation rings. Compared to pyridinium and piperidinium cations, imidazolium cations showed the best coordination to metal Pd. In the meantime, C-2 hydrogen and the length of alkyl side chains had impacts on the coordination as well.     

Influence of bifurcation position and length of side chains on the structure of isoindigo-based conjugated polymer thin films

We chose a series of isoindigo-based conjugated polymer(ⅡDDT,ⅡDDT-C3 and ⅡDDT-C4) with different length of side chains and bifurcation positions to investigate the relationship between the degree of alignment and the length of side chains and bifurcation positions.We found that the dichroic ratio was increased from 2.37 to 5.23 when the side chain was longer and the bifurcation position was away from the backbone.The π-π stacking distance was decreased from 3.67 A to 3.61 A when the bifurcation position was away from the backbone because of its smaller hindrance and the d-spacing of the(100)was increased from 20.06 A to 25.21 A when the side chain was longer.All the polymers were adopted an edge-on orientation with the backbone paralleled with the long axis of fibers.The weak interaction of side-chain in ⅡDDT-C4 was beneficial for the molecules being rearranged in parallel during the contact line receding and the strong n-n interaction could accelerate the interchain assembly of the parallel molecules through π-π interaction to form aligned fibers.     

Effect of the Nanoparticle Functionalization on the Cavitation and Crazing Process in the Polymer Nanocomposites

The nanoparticle(NP) functionalization is an effective method for enhancing their compatibility with polymer which can influence the fracture property of the polymer nanocomposites(PNCs). This work aims to further understand the cavitation and crazing process, hoping to uncover the fracture mechanism on the molecular level. By adopting a coarse-grained molecular dynamics simulation, the fracture energy of PNCs first increases and then decreases with increasing the NP functionalization degree α while it shows a continuous increase with increasing the interaction ε_(pA) between polymer and modified beads. The bond orientation degree is first characterized which is referred to as the elongation. Meanwhile, the stress by polymer chains is gradually reduced with increasing the α or the ε_(pA) while that by NPs is enhanced.Furthermore, the percentage of stress by polymer chains first increases and then decreases with increasing the strain while that by NPs shows a contrast trend. Moreover, the number of voids is quantified which first increases and then decreases with increasing the strain which reflects their nucleation and coalescence process. The voids prefer to generate from the polymer-NP interface to the polymer matrix with increasing α o r ε_(pA).As a result, the number of voids first increases and then decreases with increasing α while it continuously declines with the ε_(pA). In summary, our work provides a clear understanding on how the NP functionalization influences the cavitation and crazing process during the fracture process.     

时域反射谱法研究烷基丙烯酸酯与酚复合的介电弛豫

The dielectric relaxation measurements on binary mixtures of esters (methyl acrylate, ethyl acrylate, and butyl acrylate) with phenol derivatives (p-cresol, p-chlorophenol, and 2,4-dichlorophenol) were carried out at different concentrations at 303 K using the time domain reflectometry (TDR) over the frequency range from 10 MHz to 20 GHz. The Kirkwood correlation factor and excess inverse relaxation time were determined and discussed to yield information on the molecular interactions of the systems. The relaxation time increased with increasing concentration of phenols and increasing chain length of esters. The excess inverse relaxation time values were negative for all the systems, which indicated the solute-solvent interaction existing between esters and phenols producing a field in such a way that the effective dipole rotation was hindered.     

Conformation and dynamics of polyoxyethylene lauryl ether (Brij-35) chains in aqueous micellar solution studied by 2D NOESY and 1H NMR relaxation

Spin-lattice relaxation time, spin-spin relaxation time and two-dimensional nuclear Overhauser enhancement spectroscopy (2D NOESY) experiments of polyoxyethylene lauryl ether (Brij-35) micelles in aqueous solutions at a concentration of 100 times the critical micellar concentration (cmc) give direct evidence that the hydrophilic polyoxyethylene chains, staying in the exterior of the micellar core, are coiled, bent and aligned around the micellar core with a certain number of water molecules included. This hydrophilic layer is in contact with the solvent, water, keeping the micellar solution stable. 1H NMR relaxation time measurements show that the first oxyethylene group next to the alkyl chain participates in the formation of the surface area of the micellar core. The motion of the hydrophilic polyoxyethylene chains is less restricted as compared with the hy-drophobic alkyl chains.     

Aggregating Properties of Compounds Cz—C—n in DMSO—H2O Binary Solvent

The aggregating properties of Cz-C-n(n=3,6,10) have been unvestigated by means of fluorescence method in DMSO-H2O binary solvent. The measured CAC and C Φ values indicate that the aggregating tendency of the amphiphilic compounds Cz-C-n containing crown ether increases with the length of alkyl chains, similar to that of carbazole compounds with long alkyl chains.     

Comb-shaped 2-Methylimidazolium Poly(arylene ether sulfone) Anion Exchange Membranes with High Alkaline Stability

A series of comb-shaped poly(arylene ether sulfone)s containing pendant 2-methyl-3-alkylimidazolitun group(ImPAES-Cx,x=1,6,10)was prepared and characterized as novel anion exchange membranes.These Im-PAES-Cx membranes were obtained by benzylic bromination and imidazolium functionalization.The characteristic nano-phase separation structure was formed in membranes with longer alkyl side chains,as confmned by small-angle X-ray scattering.The nano-phase separation structures endowed ImPAES-Cx membranes with improved ionic conductivity,dimensional stability(at least 60% decrease water uptake and swelling ratio at 60℃)and mechanical properties,together with excellent alkaline stability.Especially,ImPAES-C6 membranes possessed enhanced hydroxide conductivity and chemical stability simultaneously.These results suggest that it is a feasible strategy to introduce appropriate length of alkyl side chains into anion exchange membranes(AEMs)to improve the performance.     

A CIRCULAR DICHROIC STUDY OF THE INTERACTION OF INSULIN A AND B CHAINS

It has been shown previously that the S-thiomethyl forms of the insulin A and B chains interact in solution leading to a partial transfer of Tyr side chains from hydrophilic to hydrophobic environments. In the present work, a circular dichroic study has indicated that the α-helix contents of the chains show a gradual increase upon mixing of the chains reaching completion in about 2h. The separated S-thiomethyl protected chains contain some ordered structure (A: α=15%, β=27%: B: α=22%, β=23%). Contrary to reports in the literature, the reduced chains also show some ordered structure and upon mixing of the reduced chains, the α-helix content also shows some increase. The ordered structure of the reduced chains decrease with increasing concentrations of dithiothreitel and in presence of a large excess of DTT both the reduced chains have very little, if any, α-helix structure. These latter results are in accord with those of Wu and Yang. In agreement with the results obtained previously with ultravio     

Dilectric and thermal properties of PEO doped with cadimium chloride salt

The main aim of this research is to investigate the effect of salt concentration on the dielectric properties(AC (σ_AC),permittivity（ε′）,dielectric loss（ε″）,and dielectric relaxation process) and melting behavior of polyethylene oxide （PEO）/CdCl₂ complexes.The dielectric study was carried out over a frequency range 10-335 kHz and a temperature range 25-45℃.The AC conductivity,permittivity and dielectric loss of the PEO/CdCl₂ complexes increase with increasing salt concentration and temperature.Also,it was found that the addition of CdCl₂ salt to PEO host reduced the melting temperature of PEO host.Dielectric results reveal that the relaxation process of these complexes is due to viscoelastic relaxation or non-Debye relaxation at room temperature.Additionally,it was found that relaxation behavior remained viscoelastic at different temperatures and salt concentrations.