Combustion modeling and kinetic rate calculations for a stoichiometric cyclohexane flame. 1. Major reaction pathways

The Utah Surrogate Mechanism was extended in order to model a stoichiometric premixed cyclohexane flame (P = 30 Torr). Generic rates were assigned to reaction classes of hydrogen abstraction, beta scission, and isomerization, and the resulting mechanism was found to be adequate in describing the combustion chemistry of cyclohexane. Satisfactory results were obtained in comparison with the experimental data of oxygen, major products and important intermediates, which include major soot precursors of C2-C5 unsaturated species. Measured concentrations of immediate products of fuel decomposition were also successfully reproduced. For example, the maximum concentrations of benzene and 1,3-butadiene, two major fuel decomposition products via competing pathways, were predicted within 10% of the measured values. Ring-opening reactions compete with those of cascading dehydrogenation for the decomposition of the conjugate cyclohexyl radical. The major ring-opening pathways produce 1-buten-4-yl radical, molecular ethylene, and 1,3-butadiene. The butadiene species is formed via beta scission after a 1-4 internal hydrogen migration of 1-hexen-6-yl radical. Cascading dehydrogenation also makes an important contribution to the fuel decomposition and provides the exclusive formation pathway of benzene. Benzene formation routes via combination of C2-C4 hydrocarbon fragments were found to be insignificant under current flame conditions, inferred by the later concentration peak of fulvene, in comparison with benzene, because the analogous species series for benzene formation via dehydrogenation was found to be precursors with regard to parent species of fulvene.     

PAH formation under single collision conditions: reaction of phenyl radical and 1,3-butadiene to form 1,4-dihydronaphthalene

The crossed beam reactions of the phenyl radical (C(6)H(5), X(2)A(1)) with 1,3-butadiene (C(4)H(6), X(1)A(g)) and D6-1,3-butadiene (C(4)D(6), X(1)A(g)) as well as of the D5-phenyl radical (C(6)D(5), X(2)A(1)) with 2,3-D2-1,3-butadiene and 1,1,4,4-D4-1,3-butadiene were carried out under single collision conditions at collision energies of about 55 kJ mol(-1). Experimentally, the bicyclic 1,4-dihydronaphthalene molecule was identified as a major product of this reaction (58 ± 15%) with the 1-phenyl-1,3-butadiene contributing 34 ± 10%. The reaction is initiated by a barrierless addition of the phenyl radical to the terminal carbon atom of the 1,3-butadiene (C1/C4) to form a bound intermediate; the latter underwent hydrogen elimination from the terminal CH(2) group of the 1,3-butadiene molecule leading to 1-phenyl-trans-1,3-butadiene through a submerged barrier. The dominant product, 1,4-dihydronaphthalene, is formed via an isomerization of the adduct by ring closure and emission of the hydrogen atom from the phenyl moiety at the bridging carbon atom through a tight exit transition state located about 31 kJ mol(-1) above the separated products. The hydrogen atom was found to leave the decomposing complex almost parallel to the total angular momentum vector and perpendicularly to the rotation plane of the decomposing intermediate. The defacto barrierless formation of the 1,4-dihydronaphthalene molecule involving a single collision between a phenyl radical and 1,3-butadiene represents an important step in the formation of polycyclic aromatic hydrocarbons (PAHs) and their partially hydrogenated counterparts in combustion and interstellar chemistry.     

Numerical Investigation on 1,3-Butadiene/Propyne Co-pyrolysis and Insight into Synergistic Effect on Aromatic Hydrocarbon Formation

A numerical investigation on the co-pyrolysis of 1,3-butadiene and propyne is performed to explore the synergistic effect between fuel components on aromatic hydrocarbon formation.A detailed kinetic model of 1,3-butadiene/propyne co-pyrolysis with the sub-mechanism of aromatic hydrocarbon formation is developed and validated on previous 1,3-butadiene and propyne pyrolysis experiments.The model is able to reproduce both the single component pyrolysis and the co-pyrolysis experiments,as well as the synergistic effect between 1,3-butadiene and propyne on the formation of a series of aromatic hydrocarbons.Based on the rate of production and sensitivity analyses,key reaction pathways in the fuel decomposition and aromatic hydrocarbon formation processes are revealed and insight into the synergistic effect on aromatic hydrocarbon formation is also achieved.The synergistic effect results from the interaction between 1,3-butadiene and propyne.The easily happened chain initiation in the 1,3-butadiene decomposition provides an abundant radical pool for propyne to undergo the H-atom abstraction and produce propargyl radical which plays key roles in the formation of aromatic hydrocarbons.Besides,the 1,3-butadiene/propyne co-pyrolysis includes high concentration levels of C3 and C4 precursors simultaneously,which stimulates the formation of key aromatic hydrocarbons such as toluene and naphthalene.     

Investigation of thermal transformations of propylene and its role in the formation of benzene by pyrolysis of n-hexane

Conclusions We investigated the thermal transformations of propylene and mixtures of n-hexane and propylene at 800C by use of radioactive hydrocarbons labeled with¹⁴C. The data obtained lead to the conclusion that on pyrolysis of n-hexane benzene is formed by the interaction of propylene with 1,3-butadiene or by intermediate formation of 1,3-butadiene.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 7, pp. 1556–1560, July, 1984.     

Photochemical and discharge-driven pathways to aromatic products from 1,3-butadiene

A detailed study of the photochemical and discharge-driven pathways taken by gas-phase 1,3-butadiene has been carried out. Photolysis or discharge excitation was initiated inside a short reaction tube attached to the outlet of a pulsed valve. Bath gas temperatures near 100 K were achieved in the reaction tube by the constrained expansion of the gas mixture into the tube, simulating temperatures of relevance in Titan's atmosphere. Photolysis of 1,3-butadiene was initiated at 218 nm with a laser pulse that counter-propagated the reaction tube. Discharge excitation was carried out using discharge electrodes imbedded in the reaction tube walls, enabling the study of the photochemical and discharge products under similar conditions. Products were detected using either single-photon VUV photoionization (118 nm = 10.5 eV) or resonant two-photon ionization (R(2)PI) spectroscopy in a time-of-flight mass spectrometer. Emphasis was placed on characterization of the aromatic products formed, since these may be of particular relevance to Titan's atmosphere, where benzene has been positively identified and 1,3-butadiene is projected as the principle pathway to its formation. Consistent with previous studies of the photodissociation of 1,3-butadiene, C(3)H(3) + CH(3) is the dominant primary product formed. Under the temperature-pressure conditions present in the reaction tube (T approximately 75-100 K, P = 50 mbar), C(6)H(6) is the dominant secondary photochemical product formed. A 1:1 C(4)H(6):C(4)D(6) mixture was used to prove that the C(6)H(6) product was formed by recombination of two C(3)H(3) radicals; however, a careful search for benzene revealed none, indicating that less than 1% of the C(6)H(6) formed in the reaction tube is benzene. This is consistent with expectations for these temperatures and pressures based on previous modeling of propargyl recombination. Two aromatic products were observed from the photochemistry: ethylbenzene and 3-phenylpropyne. Plausible pathways leading to these products are proposed. In the discharge, C(3)H(3) + CH(3) are also identified as significant primary neutral products and C(6)H(6) as a dominant higher-mass product. In this case, the C(6)H(6) was identified as benzene via its R2PI spectrum, appearing with intensity about 10 times larger than any other aromatic formed in the discharge. R2PI spectra of a total of about 15 aromatic products were recorded from the 1,3-butadiene discharge, among them toluene; styrene; phenylacetylene; o-, m-, and p-xylene; ethylbenzene; indane; indene; beta-methylstyrene; and naphthalene. Previously unidentified spectra in the m/z 142 and 144 mass channels were positively identified as the 1,3- and 1,4-isomers of phenylcyclopentadiene and the analogous 1-phenylcyclopentene.     

C2-C8 hydrocarbon measurement and quality control procedures at the Global Atmosphere Watch Observatory Hohenpeissenberg

A new automated on-line GC-flame ionization detection system for long-term stationary measurements of atmospheric C2-C8 hydrocarbons in the lower ppt range is described. The system is operated at the Global Atmosphere Watch Observatory Hohenpeissenberg (47 degrees 48'N, 11 degrees 01'E) in rural south Germany. Atmospheric mixing ratios of more than 40 different hydrocarbons can be continuously measured in 80 min time intervals. Corresponding detection limits are below 3 ppt, except for propene, butenes and benzene (about 10 ppt). Detailed quality assurance and quality control protocols are described which are applied to routine operation and data analysis. The various error contributions, overall precision, and accuracy for all measured compounds are discussed in detail. Typical ambient air mixing ratios are in the range of a few ppt to a few ppb, and corresponding measurement accuracies are below 10% or 10 ppt. For less than 20% of the analyzed compounds measurement accuracies are worse, mainly because of insufficient peak separation, blank values or reduced reproducibilities. The present system was tested in international intercomparison experiments (NOMHICE, AMOHA). For most of the C2-C8 hydrocarbons analyzed, our results agreed better than +/- 10% (20% NOMHICE phase 5) or +/- 10 ppt with the corresponding reference values.     

Influence of the Sulfinyl Group on the Chemoselectivity and pi-Facial Selectivity of Diels-Alder Reactions of (S)-2-(p-Tolylsulfinyl)-1,4-benzoquinone

Diels-Alder reactions of (S)-2-(p-tolylsulfinyl)-1,4-benzoquinone (1a) with cyclic (cyclopentadiene and cyclohexadiene) and acyclic dienes (1-[(trimethylsilyl)oxy]-1,3-butadiene and trans-piperylene) under different thermal and Lewis acid conditions are reported. Chemoselectivity (reactions on C(2)-C(3) versus C(5)-C(6) double bonds) is mainly related to the cyclic (on C(5)-C(6)) or acyclic (on C(2)-C(3)) structure of the diene. The high pi-facial selectivity observed could be controlled by choosing adequate experimental conditions.     

The determination of aldehydes in the exhaust gases of LPG fuelled engines

Summary The exhaust gas of a LPG fuelled engine is drawn through two bubblers in series in an ice bath, and filled with saturated 2,4-dinitrophenylhydrazine in 2M HCl. After heating the derivatives are extracted with toluene-cyclohexane and 1l samples injected on-column on a OV1 capillary column. Using an FID the lower limit of detection is 15–18 pg for formaldehyde (about 8–10 ppbv for a 16l exhaust sample). Taking the blank into account, the limit is about 40 ppbv.The exhaust gases of a LPG-fuelled engine contain formaldehyde, acetaldehyde, propionaldehyde, acrolein and acetone. Carbonyl compounds of more than 3 C-atoms were not found in detectable amounts. The engine was rund under stoichiometric, lean and rich air/fuel conditions. Under rich conditions the concentrations of the aldehydes were: formaldehyde 2.8 ppm, acetaldehyde 1.3 ppm, propionaldehyde 0.06 ppm, acrolein 0.03 ppm, acetone 0.17 ppm; under stoichiometric conditions: 4.5, 1.6, 0.10, 0.03 and 0.18 ppm respectively; under lean conditions 17.0, 2.9, 0.13, 0.07 and 0.27 ppm respectively. These figures demonstrate the necessity of measuring aldehydes in exhaust gases of LPG-fuelled engines.     

Polymerization and copolymerization of 2-phthalimidomethyll 1,3-butadiene. II. Kinetic study of the polymerization of 1,3-butadiene and of the copolymerization of 1,3-butadiene with 2-phthalimidomethyl 1,3-butadiene initiated by bis-(η3-allyl nickel trifluoroacetate)

The kinetics of the polymerization of 1,3-butadiene initiated by bis(η³-allyl nickel trifluoroacetate) prepared in benzene was studied in methylene chloride at 40°C. The reaction is first order with respect to the monomer, second order with respect to the catalyst in contrast to the case in which solvent is benzene. We have shown that the presence of a polar molecule (fe, N-methyl phthalimide) decreases the overall rate of polymerization. The apparent reactivity ratios for the system 2-phthalimidomethyl 1,3-butadiene (1)-1,3-butadiene (2) are r₁ = 0.65 ± 0.006 and r₂ = 0.48 ± 0.015.     

Reaction of niobium and tantalum neutral clusters with low pressure, unsaturated hydrocarbons in a pickup cell: from dehydrogenation to Met-Car formation

Neutral niobium and tantalum clusters (Nbn and Tan) are generated by laser ablation and supersonic expansion into a vacuum and are reacted in a pickup cell with various low pressure (approximately 1 mTorr) unsaturated hydrocarbons (acetylene, ethylene, propylene, 1-butene, 1,3-butadiene, benzene, and toluene) under nearly single collision conditions. The bare metal clusters and their reaction products are ionized by a 193 nm laser and detected by a time of flight mass spectrometer. Partially and fully dehydrogenated products are observed for small (nor=m) neutral metal clusters, respectively, with m ranging from 2 to 5 depending on the particular hydrocarbon. In addition to primary, single collision products, sequential addition products that are usually fully dehydrogenated are also observed. With toluene used as the reactant gas, carbon loss products are observed, among which Nb8C12 and Ta8C12 are particularly abundant, indicating that the Met-Car molecule M8C12 can be formed from the neutral metal cluster upon two collisions with toluene molecules. The dehydrogenation results for low pressure reactions are compared with those available from previous studies employing flow tube (high pressure) reactors. Low pressure and high pressure cluster ion reactions are also compared with the present neutral metal cluster reactions. Reactions of unsaturated hydrocarbons and metal surfaces are discussed in terms of the present neutral cluster results.     

Calculational and experimental investigations of the pressure effects on radical-radical cross combination reactions: C2H5+C2H3

Pressure-dependent product yields have been experimentally determined for the cross-radical reaction C2H5 + C2H3. These results have been extended by calculations. It is shown that the chemically activated combination adduct, 1-C4H8*, is either stabilized by bimolecular collisions or subject to a variety of unimolecular reactions including cyclizations and decompositions. Therefore the "apparent" combination/disproportionation ratio exhibits a complex pressure dependence. The experimental studies were performed at 298 K and at selected pressures between about 4 Torr (0.5 kPa) and 760 Torr (101 kPa). Ethyl and vinyl radicals were simultaneously produced by 193 nm excimer laser photolysis of C2H5COC2H3 or photolysis of C2H3Br and C2H5COC2H5. Gas chromatograph/mass spectrometry/flame ionization detection (GC/MS/FID) were used to identify and quantify the final reaction products. The major combination reactions at pressures between 500 (66.5 kPa) and 760 Torr are (1c) C2H5+C2H3-->1-butene, (2c) C2H5 + C2H5-->n-butane, and (3c) C2H3+C2H3-->1,3-butadiene. The major products of the disproportionation reactions are ethane, ethylene, and acetylene. At moderate and lower pressures, secondary products, including propene, propane, isobutene, 2-butene (cis and trans), 1-pentene, 1,4-pentadiene, and 1,5-hexadiene are also observed. Two isomers of C4H6, cyclobutene and/or 1,2-butadiene, were also among the likely products. The pressure-dependent yield of the cross-combination product, 1-butene, was compared to the yield of n-butane, the combination product of reaction (2c), which was found to be independent of pressure over the range of this study. The [1-C4H8]/[C4H10] ratio was reduced from approximately 1.2 at 760 Torr (101 kPa) to approximately 0.5 at 100 Torr (13.3 kPa) and approximately 0.1 at pressures lower than about 5 Torr (approximately 0.7 kPa). Electronic structure and RRKM calculations were used to simulate both unimolecular and bimolecular processes. The relative importance of C-C and C-H bond ruptures, cyclization, decyclization, and complex decompositions are discussed in terms of energetics and structural properties. The pressure dependence of the product yields were computed and dominant reaction paths in this chemically activated system were determined. Both modeling and experiment suggest that the observed pressure dependence of [1-C4H8]/[C4H10] is due to decomposition of the chemically activated combination adduct 1-C4H8* in which the weaker allylic C-C bond is broken: H2C=CHCH2CH3-->C3H5+CH3. This reaction occurs even at moderate pressures of approximately 200 Torr (26 kPa) and becomes more significant at lower pressures. The additional products detected at lower pressures are formed from secondary radical-radical reactions involving allyl, methyl, ethyl, and vinyl radicals. The modeling studies have extended the predictions of product distributions to different temperatures (200-700 K) and a wider range of pressures (10(-3)-10(5) Torr). These calculations indicate that the high-pressure [1-C4H8]/[C4H10] yield ratio is 1.3+/-0.1.     

Orbital interactions and their effects on 13C NMR chemical shifts for 4,6-disubstituted-2,2-dimethyl-1,3-dioxanes. A theoretical study

A theoretical study is employed to describe the orbital interactions involved in the conformers' stability, the energies for the stereoelectronic interactions, and the corresponding effects of these interactions on the molecular structure (bond lengths) for cis- and trans-4,6-disubstituted-2,2-dimethyl-1,3-dioxanes. For cis-4,6-disubstituted-2,2-dimethyl-1,3-dioxanes, two LPO --> sigma*C(2)-Me(8) interactions are extremely important and the energies involved in these interactions are in the range 6.81-7.58 kcal mol(-1) for the LP(O)(1) --> sigma*C(2)-Me(8) and 7.58-7.71 kcal mol(-1) for the LP(O)(3) --> sigma*C(2)-Me(8) interaction. These two LP(O) --> sigma*C(2)-Me(8) interactions cause an upfield shift, indicating an increased shielding (increased electron density) of the ketal carbon C(2) as well as the axial Me(8) group in the chair conformation. These LP(O) --> sigma*C(2)-Me(8) hyperconjugative anomeric type interactions can explain the 13C NMR chemical shifts at 19 ppm for the axial methyl group "Me(8)" and 98.5 ppm for the ketal carbon "C(2)". The observed results for the trans derivatives showed that for compounds 2a-c (R = -CN, -C[triple bond]CH, and -CHO, respectively) the chair conformation is predominant, whereas for 2d,f-h [-CH3, -Ph, -C6H4(p-NO2), -C6H4(p-OCH3), respectively] the twist-boat is the most stable compound and for 2e [-C(CH3)3] is the only form.     

气相色谱-质谱联用测定柴油机排气微粒中的可溶性有机组分

采用气相色谱-质谱联用技术(GC/MS)对柴油机排气微粒中的可溶性有机组分(SOF)进行了分离分析。SOF分析液样品采用超声提取法制取。GC条件为:SE-50型石英毛细管色谱柱(30 m×0.2 mm i.d.×0.2 μm）;程序升温：初始温度100 ℃,恒温2.0 min,以4.0 ℃/min升至160 ℃,再以8 ℃/min升至250 ℃,恒温31.75 min;汽化室温度260 ℃;载气为氦气,柱头压力45 kPa;进样量1 μL。MS条件为:电子轰击离子源,电子轰击能量70 eV;倍增器电压18     

Diradical mechanisms for the cycloaddition reactions of 1,3-butadiene,benzene, thiophene,ethylene, and acetylene on a Si(111)-7x7 surface

The cycloaddition chemistry of several representative unsaturated hydrocarbons (1,3-butadiene, benzene, ethylene, and acetylene) and a heterocyclic aromatic (thiophene) on a Si(111)-7x7 surface has been explored by means of density functional cluster model calculations. It is shown that (i) 1,3-butadiene, benzene, and thiophene can undergo both [4+2]-like and [2+2]-like cycloadditions onto a rest atom-adatom pair, with the former process being favored over the latter both thermodynamically and kinetically; (ii) ethylene and acetylene undergo [2+2] cycloaddition-like chemisorptions onto a rest atom-adatom pair; and (iii) all of these reactions adopt diradical mechanisms. This is in contrast to the [4+2] cycloaddition-like chemisorptions of conjugated dienes on a Si(100) surface and to the prototype [4+2] cycloadditions in organic chemistry, which were believed to adopt concerted reaction pathways. Of particular interest is the [4+2]-like cycloaddition of s-trans-1,3-butadiene, whose stereochemistry is retained during its chemisorption on the Si(111) surface.     

Monitoring of trace levels of p-dioxan in high purity benzene feedstock by capillary gas chromatography

Summary A procedure has been standarized for the determination of p-dioxan (1,4-dioxan) in benzene feedstock in the range of 1 to 100 ppm by capillary GC. The GC conditions such as oven temperature, length of the column etc were optimized to achieve better resolution of p-dioxan from hydrocarbons. The standard addition method of quantitation, was used to determine the amount of p-dioxan and was found to give better results than those obtained by external standardization. Prior to analysis the identity of the p-dioxan peak was established by GC-MS. The proposed method has been applied for the monitoring of p-dioxan in high purity benzene feedstock produced by the Udex extraction process in the refinery. The data were used for optimization of plant conditions for the production of high purity benzene feedstock. By using this method, the p-dioxan content down to 0.5 ppm can be determined in the benzene feedstock.     

A collecting and analysing system for the determination of chlorinated hydrocarbons in working place atmospheres

Conclusion The method allows to collect and analyse a wide range of chlorinated hydrocarbons in longtime measurements with good results. It works with the gaseous chloromethane (b. p. –23.8°C) as well as with the high-boiling hexachloro-1,3-butadiene (b.p. 215°C) and the reactive 1 -chloro-2,3-epoxy-propane. If the concentration of volatile compounds is very high it may be necessary to shorten the sampling time in order to prevent overloading, but in general sampling during a full shift of 8 h is possible.

---

Sammel- und Analysensystem zur Bestimmung von CKW in der Luft am Arbeitsplatz

     

Perthio- and perseleno-1,3-butadienes, -but-1-ene-3-ynes,and -[3]-cumulenes: one-step syntheses from 1,4-dilithio-1,3-butadiyne

[reaction: see text] Treatment of 1,4-dilithio-1,3-butadiyne (1) with dichalcogenides RSSR or RSeSeR affords dithio- and diseleno-1,3-butadiynes (2, 3), perthio- and perseleno-[3]-cumulenes (4, 5), perthio- and perseleno-1,3-butadienes (6, 7), and/or perthio- and perseleno-but-1-ene-3-ynes (8, 9). The products can be controlled by stoichiometry and temperature, by the presence or absence of oxygen, and by choice of the "R" group. By X-ray crystallography, hexa(methylthio)-1,3-butadiene is highly twisted, with a torsion angle [Phi(CCCC)] of 84.7 degrees and an elongated C(2)-C(3) distance of 1.484(3) A.     

Access to C(sp3)-C(sp2) and C(sp2)-C(sp2) bond formation via sequential intermolecular carbopalladation of multiple carbon-carbon bonds

A synthetic strategy of 4-benzyl-substituted 1,3-butadiene derivatives through Pd-catalyzed three-component coupling reaction of benzyl chlorides, alkynes, and monosubstituted alkenes is described. This tandem coupling reaction forms a C(sp(3))-C(sp(2)) bond and a C(sp(2))-C(sp(2)) bond sequentially in a single-step operation.     

On-line analysis of diesel engine exhaust gases by selected ion flow tube mass spectrometry

Selected ion flow tube mass spectrometry (SIFT-MS) has been used to analyse on-line and in real time the exhaust gas emissions from a Caterpillar 3304 diesel engine under different conditions of load (idle and 50% of rated load) and speed (910, 1500 and 2200 rpm) using three types of fuel: an ultra-low-sulphur diesel, a rapeseed methyl ester and gas oil. SIFT-MS analyses of the alkanes, alkenes and aromatic hydrocarbons in the headspace of these fuels were also performed, but the headspace of the rapeseed methyl ester consists mainly of methanol and a compound with the molecular formula C4H8O. The exhaust gases were analysed for NO and NO2 using O2+* reagent ions and for HNO2 using H3O+ reagent ions. The following aldehydes and ketones in the exhaust gases were quantified by using the combination of H3O+ and NO+ reagent ions: formaldehyde, acetaldehyde, propenal, propanal, acetone, butanal, pentanal, butanone and pentanone. Formaldehyde, acetaldehyde and pentenal, all known respiratory irritants associated with sensitisation to asthma of workers exposed to diesel exhaust, are variously present within the range 100-2000 ppb. Hydrocarbons in the exhaust gases accessible to SIFT-MS analyses were also quantified as total concentrations of the various isomers of C3H4, C3H6, C4H6, C5H8, C5H10, C6H8, C6H10, C7H14, C6H6, C7H8, C8H10 and C9H12.     

Thermal isomerization and decomposition of 1,2-butadiene in shock waves

1,2-Butadiene diluted with Ar was heated behind reflected shock waves over the temperature and the total density range of 1100–1600 K and 1.36 × 10^?5 ? 1.75 × 10^?5 mol/cm³. The major products were 1,3-butadiene, 1-butyne, 2-butyne, vinylacetylene, diacetylene, allene, propyne, C₂H₆, C₂H₄, CH₄, and benzene, which were analyzed by gas chromatography. The UV kinetic absorption spectroscopy at 230 nm showed that 1,2-butadiene rapidly isomerizes to 1,3-butadiene from the initial stage of the reaction above 1200 K. In order to interpret the formation of 1,3-butadiene, 1-butyne, and 2-butyne, it was necessary to include the parallel isomerizations of 1,2-butadiene to these isomers. The present data were successfuly modeled with a 82 reaction mechanism. From the modeling, rate constant expressions were derived for the isomerization 1,2-butadiene = 1,3-butadiene to be k₃ = 2.5 × 10¹³ exp(?63 kcal/RT) s^?1 and for the decomposition 1,2-butadiene = C₃H₃ + CH₃ to be k₆ = 2.0 × 10¹⁵ exp(?75 kcal/RT) s^?1, where the activation energies, 63 kcal/mol and 75 kcal/mol, were assumed. These rate constants are only applicable under the present experimental conditions, 1100–1600 K and 1.23–2.30 atm. © 1995 John Wiley & Sons, Inc.