Preparation and characterization of type 3 resistant starch by ultrasound-assisted autoclave gelatinization and its effect on steamed bread quality

In this study, we aimed to establish an innovative and efficient preparation method of potato resistant starch (PRS). To achieve this, we prepared type 3 resistant starch (RS3) from native potato starch (PS) using an ultrasonic method combined with autoclave gelatinization and optimized by the response surface method to study the structure and properties of potato RS3 (PRS3) and its effect on the quality of steamed bread. Under optimal treatment conditions, the PRS3 content increased from 7.5% to 15.9%. Compared with PS, the B-type crystal structure of PRS3 was destroyed, and the content of hydroxyl groups was increased, but no new chemical groups were introduced. PRS3 had a rougher surface and a lower crystallinity, gelatinization temperature, viscosity, setback value, and breakdown value. The low content (5%) of PRS3 had a stable viscosity and was easily degraded by bacteria, which can improve the quality of steamed bread to a certain extent. When the PRS3 content was over 10%, it competed with the gluten protein to absorb water, which reduced the contents of β-turn and α-helix in the dough, increased the contents of β-fold, and weakened the structure of the gluten network. It also decreased the specific volume and elasticity of the steamed bread and increased the spreading rate, hardness, and chewiness. Steamed bread prepared with a flour mixture containing 5% PRS3 was similar to the presidential acceptance of control flour. In this study, a new sustainable and efficient PRS3 preparation method was established, which has certain guiding significance for the processing of Functional steamed bread with high-resistant starch.     

Ultrasound based modification and structural-functional analysis of corn and cassava starch

In this study, the starch molecules were modified with ultrasonication at two different time intervals by using starch molecules from corn and cassava. This research aimed to examine the effect of the high power ultrasound of 40 kHz voltage and frequency with short time duration on structural and physical properties of corn and cassava starch. Morphology of ultrasonically treated starch granules was observed by scanning electron microscopy (SEM), FTIR, differential scanning calorimetry (DSC), and X-ray diffraction (XRD) and compared with untreated samples. After the ultrasound treatment groove and notch appeared on the surface of the starch granules. The results showed that gelatinization temperature did not change with ultrasound treatments, but enthalpy value decreased from 13.15 ± 0.25 J/g to 11.5 ± 0.29 J/g and 12.65 ± 0.32 J/g to 10.32 ± 0.26 J/g for sonicated corn and cassava starches, respectively. The XRD results revealed a slight decreased in the crystallinity degree (CD) of sonicated corn (25.3,25.1) and cassava starch (21.0,21.4) as compared to native corn (25.6%) and cassava starch (22.2%). This study suggests that non-thermal processing techniques have the potential to modify the starch from different sources and their applications due to starch’s versatility, low cost, and comfort of use after processing with altered physicochemical properties.     

Ultrasound-chilling assisted annealing treatment to produce a lower glycemic index of white rice grains with different amylose content

White rice samples, Chai-Nat1 (CN1) and Jasmin rice (KDML105), were treated with the ultrasound-chilling (UC) and combined with annealing treatments (UC + ANN 45, UC + ANN50, and UC + ANN55). Their physicochemical properties and in vitro glycemic index of rice samples were analyzed. UC + ANN treatments presented pasting temperature, gelatinization temperature and crystallinity increased whereas the glycemic index of both rice samples was decreased as compared to its native. Especially, UC + ANN55 treated rice produced the lowest glycemic index and starch hydrolysis. Moreover, UC + ANN treated CN1 rice exhibited delayed gelatinization temperature, increased gelatinization enthalpy, and decreased glycemic index than KDML105 rice. In addition, Pearson’s correlation presented that UC + ANN and amylose content had a highly negative correlation with the glycemic index at p < 0.0.1. The result exhibited that UC followed by ANN show an effective way to modify starch granules with delayed starch hydrolysis reduced glycemic index and properties depending on annealing temperature and rice cultivar.     

Modification in structural,physicochemical, functional,and in vitro digestive properties of kiwi starch by high-power ultrasound treatment

Kiwi starch (KS) is a fruit-derived starch; in order to improve its processing performance and increase its added value, it is necessary to modify KS to enhance the positive attributes and to enlarge its application. In this study, KS was modified by high-power ultrasound treatment (HUT) to reveal the relationship between the structure and function of KS with different treatment powers (0, 200, 400, and 600 W) and different treatment times (0, 10, 20, and 30 min). The results showed that HUT destroyed the granular morphology of KS, formed holes and cracks on the surface, and reduced the particle size and the short-range molecular order of KS. After different HUTs, the apparent amylose content (AAC), swelling power (SP), water solubility index (WSI), viscosity and setback value (SB) of KS were significantly increased, while the gelatinization temperature was significantly decreased. In addition, HUT significantly reduced the content of rapidly digestible starch (RDS) and slowly digestible starch (SDS), while it significantly enhanced the content of resistant starch (RS) (64.08–72.73%). In a word, HUT as a novel physical modification method for KS, enlarged its application, and fulfilled different demands of a starch-based product, which introduces another possibility for kiwi fruit further processing.     

Effects of ultrasound treatment on the starch properties and oil absorption of potato chips

As a non-thermal processing method, the ultrasound treatment prior to the frying process has been demonstrated with great potential in reducing the oil absorption of fried food. This research aimed to evaluate the effect of ultrasound pretreatment on starch properties, water status, pore characteristics, and the oil absorption of potato slices. Ultrasound probe set with two power (360 W and 600 W) at the frequency of 20 kHz for 60 min was applied to perform the pretreatments. The results showed that ultrasound pretreatment led to the surface erosion of starch granules and higher power made the structure of starch disorganized. Moreover, the fraction of bound water and immobilized water were changed after ultrasonic pretreatment. Pores with the minor diameters (0.4–3 μm and 7–12 μm) were formed after ultrasound pretreatment. The penetrated surface oil (PSO) content, and structure oil (STO) content were reduced by 27.31% and 22.25% respectively with lower power ultrasound pretreatment. As the ultrasound power increased, the surface oil (SO) content and PSO content increased by 25.34% and 12.89% respectively, while STO content decreased by 38.05%. By using ultrasonic prior to frying, the quality of potato chips has been greatly improved.     

Ultrasonic-assisted binding of canistel (Lucuma nervosa A.DC) seed starch with quercetin

In order to provide a reference for improving the physicochemical properties of starch, the study of starch polyphenol complex interaction has aroused considerable interest. As a common method of starch modification, ultrasound can make starch granules have voids and cracks, and make starch and polyphenols combine more closely. In this research, canistel seed starch was modified by ultrasonic treatment alone or combined with quercetin. The molecular structure, particle characteristics and properties of starch were evaluated. With the increase of ultrasonic temperature, the particle size of the dextrinized starch granules increased, but the addition of quercetin could protect the destruction of starch granule size by ultrasonic; X-ray diffraction and infrared spectra indicated that quercetin was bound to the surface of canistel seed starch through hydrogen bonding, and the complex and the original starch had the same crystal structure and increased crystallinity; by molecular simulation, quercetin bound inside the starch molecular helix preserved the crystalline helical configuration of starch to some extent and inhibited the complete unhelicalization of starch molecules. Meanwhile, hydrogen bonding was the main driving force for the binding of starch molecules to quercetin, and van der Waals interactions also promoted the binding of both. In the physicochemical properties, as the temperature increased after the combination of ultrasonic modified starch combined with quercetin, the solubility, swelling force and apparent viscosity of the compound increased significantly, and it has higher stability and shear resistance.     

Combined ultrasound and germination treatment on the fine structure of highland barley starch

Highland barley is a grain crop grown in Tibet, China. This study investigated the structure of highland barley starch using ultrasound (40 kHz, 40 min, 165.5 W) and germination treatments (30℃ with 80% relative humidity). The macroscopic morphology and the barley's fine and molecular structure were evaluated. After sequential ultrasound pretreatment and germination, a significant difference in moisture content and surface roughness was noted between highland barley and the other groups. All test groups showed an increased particle size distribution range with increasing germination time. FTIR results also indicated that after sequential ultrasound pretreatment and germination, the absorption intensity of the intramolecular hydroxyl (–OH) group of starch increased, and hydrogen bonding was stronger compared to the untreated germinated sample. In addition, XRD analysis revealed that starch crystallinity increased following sequential ultrasound treatment and germination, but a-type of crystallinity remained after sonication. Further, the Mw of sequential ultrasound pretreatment and germination at any time is higher than that of sequential germination and ultrasound. As a result of sequential ultrasound pretreatment and germination, changes in the content of chain length of barley starch were consistent with germination alone. At the same time, the average degree of polymerisation (DP) fluctuated slightly. Lastly, the starch was modified during the sonication process, either prior to or following sonication. Pretreatment with ultrasound illustrated a more profound effect on barley starch than sequential germination and ultrasound treatment. In conclusion, these results indicate that sequential ultrasound pretreatment and germination improve the fine structure of highland barley starch.     

Preparation and characterization of waxy maize starch nanoparticles via hydrochloric acid vapor hydrolysis combined with ultrasonication treatment

The objective of this work was to develop a simple and efficient method to prepare waxy maize starch nanoparticles (SNPs) by hydrochloric acid (HCl) vapor hydrolysis combined with ultrasonication treatment. The size, morphology, thermal property, and crystal structure of the SNPs were systematically studied. HCl treatment introduces a smaller particle diameter of starch particles from 13.73 ± 0.93 μm to 1.52 ± 0.01–8.32 ± 0.63 μm. Further ultrasonication treatment formed SNPs that displayed desirable uniformity and near-perfect spherical and ellipsoidal shapes with a diameter of 150.65 ± 1.91–292.85 ± 0.07 nm. The highest yield of SNPs was 80.5%. Compared with the native starch, the gelatinization enthalpy changes of SNPs significantly decreased from 14.65 ± 1.58 J/g to 7.40 ± 1.27 J/g. Interestingly, the SNPs showed a wider melting temperature range of 22.77 ± 2.35 °C than native starch (10.94 ± 0.87 °C). The relative crystallinity of SNPs decreased to 29.65%, while long-time ultrasonication resulted in amorphization. HCl vapor hydrolysis combined with ultrasonication treatment can be an affordable and accessible method for the efficient large-scale production of SNPs. The SNPs developed by this method will have potential applications in the food, materials, and medicine industries.     

Structural and physicochemical characterization of modified starch from arrowhead tuber (Sagittaria sagittifolia L.) using tri-frequency power ultrasound

Sagittaria sagittifolia L. is a well-known plant, belongs to the Alismataceae family. Sonication can improve the functional properties of starch; hence, the aim of this study was to develop ultrasonically modified arrowhead starch (UMAS) using a sophisticated and eco-friendly tri-frequency power ultrasound (20/40/60 kHz) method at 300, 600, and 900 W for 15 and 30 min. Significant (p < 0.05) increases in swelling power, solubility, and water and oil holding capacities were achieved. FTIR spectroscopy corroborated the ordered, amorphous, and hydrated crystals of the sonicated samples. Increases in sonication frequency and power led to significant (p < 0.05) increases in onset gelatinization temperatures. Scanning electron microscopic analysis of sonicated samples showed superficial cracks and roughness on starch granules appeared in a sonication power-dependent manner compared with that of untreated sample. Overall, the ultrasonically-treated samples showed improved physicochemical properties, which could be useful for industrial applications.     

Effects of ultrasonic treatment on amylose-lipid complex formation and properties of sweet potato starch-based films

To investigate the effect of ultrasonic treatment on the properties of sweet potato starch and sweet potato starch-based films, the complexing index, thermograms and diffractograms of the sweet potato starch-lauric acid composite were tested, and light transmission, microstructure, and mechanical and moisture barrier properties of the films were measured. The results indicated that the low power density ultrasound was beneficial to the formation of an inclusion complex. In thermograms, the gelatinization enthalpies of the ultrasonically treated starches were lower than those of the untreated sample. With the ultrasonic amplitude increased from 40% to 70%, the melting enthalpy (ΔH) of the inclusion complex gradually decreased. X-ray diffraction revealed that the diffraction intensity of the untreated samples was weaker than that of the ultrasonically treated samples. When the ultrasonic amplitude was above 40%, the diffraction intensity and relative crystallinity of inclusion complex gradually decreased. The scanning electronic microscope showed that the surface of the composite films became smooth after being treated by ultrasonication. Ultrasonication led to a reduction in film surface roughness under atomic force microscopy analysis. The films with ultrasonic treatment exhibited higher light transmission, lower elongation at break, higher tensile strength and better moisture barrier property than those without ultrasonic treatment.     

辛烯基琥珀酸酶解淀粉酯的性质和显微结构研究

采用傅里叶红外光谱、X射线衍射、紫外可见光谱、激光纳米粒度仪和扫描电镜分析了自制的辛烯基琥珀酸酶解淀粉酯(EOSS)的性质和结构。轻度酶解淀粉经辛烯基琥珀酸接枝改性后,反应只引入辛烯基琥珀酸基团;酯化作用主要发生在无定形区,而对淀粉颗粒的晶型无影响;EOSS具有较高的透明度,且透明度随着取代度的增加而增大;EOSS制成的油脂乳状液粒度小,粒径大小分布均匀,具有较好的乳化性和乳化稳定性;以EOSS为壁材,采用喷雾干燥法制得的油脂微胶囊颗粒包埋效果良好。实验结果表明,制备的EOSS具有良好的性质和结构,可作乳化剂和微胶囊壁材。     

Effect of multiple-frequency ultrasound-assisted transglutaminase dual modification on the structural,functional characteristics and application of Qingke protein

Qingke protein rich in restricted amino acids such as lysine, while the uncoordination of ratio of glutenin and gliadin in Qingke protein has a negative impact on its processing properties. In this study, the effect of multiple-frequency ultrasound combined with transglutaminase treatment on the functional and structural properties of Qingke protein and its application in noodle manufacture were investigated. The results showed that compared with the control, ultrasound-assisted transglutaminase dual modification significantly increased the water and oil holding capacity, apparent viscosity, foaming ability, and emulsifying activity index of Qingke protein, which exhibited a higher storage modulus G' (P < 0.05). Meanwhile, ultrasound combined with transglutaminase treatment enhanced the cross-linking degree of Qingke protein (P < 0.05), as shown by decreased free amino group and free sulfhydryl group contents, and increased disulfide bond content. Moreover, after the ultrasound-assisted transglutaminase dual modification treatment, the fluorescence intensity, the contents of α-helix and random coil in the secondary structure of Qingke protein significantly decreased, while the β-sheet content increased (P < 0.05) compared with control. SDS-PAGE results showed that the bands of Qingke protein treated by ultrasound combined with transglutaminase became unclear. Furthermore, the quality of Qingke noodles made with Qingke powder (140 g/kg dual modified Qingke protein mixed with 860 g/kg extracted Qingke starch) and wheat gluten 60–70 g/kg was similar to that of wheat noodles. In summary, multiple-frequency ultrasound combined with transglutaminase dual modification can significantly improve the physicochemical properties of Qingke protein and the modified Qingke proteins can be used as novel ingredients for Qingke noodles.     

Isothermal and temperature-cycling retrogradation of high-amylose corn starch: Impact of sonication on its structural and retrogradation properties

In this study, the effects of sonication and temperature-cycled storage on the structural properties and resistant starch content of high-amylose corn starch were investigated. Sonication induced a partial depolymerization of the molecular structures of amylopectin and amylose. Sonication treatment induced the appropriate structural changes for retrogradation. Although the relative crystallinity of sonicated starch was lower than that of non-sonicated starch, sonicated starch after retrogradation showed much higher relative crystallinity than non-sonicated starch. Regardless of sonication treatment, temperature-cycled storage resulted in a higher degree of retrogradation than isothermal storage, but the rate of retrogradation was greater in sonicated starch than in non-sonicated starch, as supported by retrogradation enthalpy, the Avrami constant, and relative crystallinity. The highly developed crystalline structure in sonicated starches due to retrogradation was reflected by the large amount of resistant starch.     

Modulating the in vitro digestibility of chemically modified starch ingredient by a non-thermal processing technology of ultrasonic treatment

Chemically modified starch (RS4) was commercially available as a food ingredient, however, there was a lack of knowledge on how ultrasonic treatment (non-thermal technology) modulated the enzymatic resistance of RS4. In this study, structural change of RS4 during ultrasonic treatment and its resulting digestibility was investigated. Results from scanning electron microscopy, particle size analysis, chemical composition analysis, X-ray diffraction, differential scanning calorimetry, and Fourier transform infrared spectroscopy showed that ultrasonic treatment remained the granule morphology, increased the apparent amylose content, reduced the particle size, destroyed the crystalline structure, decreased the helical orders, but enhanced the short-range molecular orders of ultrasonic-processed RS4. In vitro digestibility analysis showed that the total content of rapidly digestible starch and slowly digestible starch was increased, whereas the content of resistant starch was decreased. Overall, ultrasonic treatment substantially reduced the enzymatic resistance of RS4, indicating that RS4 was not stability against the non-thermal processing technology of ultrasonic treatment.     

Fish oil based vitamin D nanoencapsulation by ultrasonication and bioaccessibility analysis in simulated gastro-intestinal tract

Recently, nanoemulsions have been employed for different applications including food and drug industries for efficient nutrient delivery system. In this study, vitamin D (a lipophilic molecule) was encapsulated in fish oil for higher oral bioavailability. The oil-in-water nanoemulsion was formulated by ultrasonication technique with a droplet size range of 300–450 nm and a shelf life of more than 90 days. The influence of oil, water and surfactant concentration was investigated by phase diagram. The formulated nanoemulsion had encapsulation efficiency in the range of 95.7–98.2%. Further, nanoemulsion passed through simulated gastro-intestinal tract revealed an increased bioavailability than non-encapsulated vitamin. Thus, the formulation can be used as a drug delivery vehicle for various lipophilic compounds. Till date, no one have fabricated an efficient nano-vehicle for the delivery of vitamin D as well as analyzed the efficient delivery system in simulated GI-tract, this is first of its kind study in this regard. This can be scaled up further after analyzing the safety aspects.     

Effect of ultrasound on structural and physicochemical properties of sweetpotato and wheat flours

Ultrasound technologies are increasingly used for modification of physicochemical properties of food systems. Effects of ultrasound (20 kHz, 750 W) up to 20 h on physicochemical properties of two varieties of sweetpotato flour were studied and compared with those of commercial wheat flour. Ultrasound induced structural modifications on starch granules mainly in the morphological changes of granules and reduction of the crystallinity. Longer treatment significantly decreased enthalpy change of gelatinization, pasting viscosities, gelling capacity, while increasing in vitro starch digestibility of raw flour. Besides, prolonged treatment reduced total phenolic contents and in vitro antioxidant activities of sweetpotato flours, mainly due to pyrolysis and release of hydroxyl radicals caused by cavitation. The extents of these changes were seen to depend on the treatment time and indicated degradation and modifications of the chemical components (e.g., starch and polyphenol) of flours. This study suggests that ultrasound processing as a non-thermal and energy-saving technique has potential to modify flour functionalities.     

高静压对淀粉结构及糊化性质的影响

综述了高静压对淀粉的影响。阐述了高静压的定义及其原理,与高静压的作用直接相关的淀粉结构及其性质。根据文献资料报道对25种以上淀粉的研究表明,高静压不仅对淀粉结构影响明显,包括微观结构、宏观颗粒形态,而且对淀粉糊化过程及性质也有较大的影响。施加的压力、淀粉的种类、处理温度、溶液浓度不同,对淀粉的结构和糊化影响也显著不同。大量的研究表明,高静压对淀粉的处理是有潜力的非热物理变性的手段,通过利用不同的高静压处理手段,得到不同品质的高静压淀粉产品,使淀粉在不同的领域中发挥更大的作用。     

Impact of ultrasonication on the aggregation structure and physicochemical characteristics of sweet potato starch

In order to understand the relationship between the aggregation structure and physicochemical characteristics of ultrasonicated sweet potato starches, sweet potato starch modified with different sonication time (15, 20, 25 and 30 min) was studied in this work for developing starch-based ingredients with tailored functionality. SEM, XRD, FTIR, Raman and DSC measurements were conducted to investigate the transformations of morphological features, crystalline structure, short-range ordered structure and ordered molecular structure of starch granules. Not only could pores and cracks be observed at the surface of starch, but also the structural disorganizations were more evidently induced with the treatment time increasing, especially for the degrees of crystallinity, short-range molecular orders and ordered molecular structures. And these disordering in the aggregation structure not only increased the swelling power and solubility but also declined the pasting temperature, peak viscosity, final and breakdown viscosity of gelatinized starch. In addition, the strengthened retrogradation and gel structures formed by the rearrangement and entanglement of starch polymer chains also demonstrated the structural disorganizations of starch granules during ultrasonic treatment. Therefore, the results of this study may provide further insight in understanding the structural basis of starch physicochemical properties.     

喇曼光谱法测定单个大米淀粉微粒糊化过程的实时研究

在特定加温模式和过量水分条件下,采用激光光镊喇曼光谱系统研究了单个大米淀粉微粒的糊化行为,获得了整个糊化过程的喇曼光谱.以光谱峰高的变化标记糊化过程,进一步验证了477 cm-1峰归属为淀粉分子骨架振动的事实.通过分析C-O-H基团相关特征峰1 052、1 083、1 127、1 339 cm-1的变化情况研究大米淀粉颗粒糊化过程中的速率问题.结果显示:糊化开始后,相关特征峰在过程中呈增强趋势,随着时间增加,温度升高,速率加快,直至糊化结束.     

Characterization of water mobility and distribution in low- and intermediate-moisture food systems

The mechanism of water uptake in low moisture cereals and cookies has been studied by NMR relaxometry and solid imaging technology implemented on a low-resolution benchtop NMR spectrometer. A comparison between classical MRI and SPRITE imaging are also presented to highlight the benefits of each technology. The spin lattice (T(1)) and spin spin (T(2)) relaxation times, the 1D and 2D SPRITE imaging, were determined on Smacks, corn flakes, chocolate chips cookies, soft caramel candies with a chocolate crème filler, and corn starch/water systems. The Smacks and corn flakes were studied based on the soaking time in milk, and the results showed that T(1) and T(2) decreased in the first 20 sec of soaking and then increased with the soaking time. For Smacks stored at different relative humidity, T(1) decreased during the first day of storage and then was relatively constant over storage time indicating that the system reached an equilibrium. 1D SPRITE profiles indicated an increase in signal intensity over storage time for cookies in 58% RH. However, the moisture uptake was insignificant indicating that the water mobility (and not the amount of water) changed due to various chemical interactions in the system (hydrogen bonding, starch retrogradation, glassy/rubbery equilibrium). The T(1) and T(2) of corn starch/water systems decreased as the concentration in starch increased and temperature increased from 30 degrees C to 60 degrees C. However, for temperatures higher than 60 degrees C, the relaxation times increased showing more mobility and flexibility of the polymer chains during gelatinization.