DNA-embedded Au/Ag core-shell nanoparticles

Here, we synthesized highly stable DNA-embedded Au/Ag core-shell nanoparticles (NPs) by a straightforward silver-staining of DNA-modified Au nanoparticles (AuNPs); unlike conventional DNA-surface modified NPs that present particle stability issues, DNA-embedded core-shell NPs offer an extraordinary stability with nanoscale controllability of silver shell thickness; these DNA-embedded core-shell NPs show excellent biorecognition properties and Ag shell-thickness-based optical properties, distinctively different from those of a mixture of AuNPs and AgNPs or Ag/Au alloy nanoparticles.     

Use of alkaline or enzymatic sample pretreatment prior to characterization of gold nanoparticles in animal tissue by single-particle ICPMS

Inductively coupled plasma mass spectrometry in single-particle mode (spICPMS) is a promising method for the detection of metal-containing nanoparticles (NPs) and the quantification of their size and number concentration. Whereas existing studies mainly focus on NPs suspended in aqueous matrices, not much is known about the applicability of spICPMS for determination of NPs in complex matrices such as biological tissues. In the present study, alkaline and enzymatic treatments were applied to solubilize spleen samples from rats, which had been administered 60-nm gold nanoparticles (AuNPs) intravenously. The results showed that similar size distributions of AuNPs were obtained independent of the sample preparation method used. Furthermore, the quantitative results for AuNP mass concentration obtained with spICPMS following alkaline sample pretreatment coincided with results for total gold concentration obtained by conventional ICPMS analysis of acid-digested tissue. The recovery of AuNPs from enzymatically digested tissue, however, was approximately four times lower. Spiking experiments of blank spleen samples with AuNPs showed that the lower recovery was caused by an inferior transport efficiency of AuNPs in the presence of enzymatically digested tissue residues.     

Gold Nanoparticle Assemblies on Surfaces: Reactivity Tuning through Capping‐Layer and Cross‐Linker Design

The immobilization of metal nanoparticles (NPs) with molecular control over their organization is challenging. Herein, we report the formation of molecularly cross‐linked AuNP assemblies using a layer‐by‐layer approach. We observed four types of assemblies: 1) small aggregates of individual AuNPs, 2) large aggregates of individual AuNPs, 3) networks of fused AuNPs, and 4) gold islands. Interestingly, these assemblies with the different cross‐linkers and capping layers represent different stages in the complete fusion of AuNPs to afford islands of continuous gold. We demonstrate that the stability toward fusion of the nanoparticles of the on‐surface structures can be controlled by the reactivity of the cross‐linkers and the hydrophilicity/hydrophobicity of the nanoparticles.     

In Vivo X‐ray Imaging of Transport of Renal Clearable Gold Nanoparticles in the Kidneys

With more and more engineered nanoparticles (NPs) being designed renal clearable for clinical translation, fundamental understanding of their transport in the different compartments of kidneys becomes increasingly important. Here, we report noninvasive X‐ray imaging of renal clearable gold NPs (AuNPs) in normal and nephropathic kidneys. By quantifying the transport kinetics of the AuNPs in cortex, medulla and pelvis of the normal and injured kidneys, we found that ureteral obstruction not just blocked the NP elimination through the ureter but also slowed down their transport from the medulla to pelvis and enhanced the cellular uptake. Moreover, the transport kinetics of the NPs and renal anatomic details can be precisely correlated with local pathological lesion. These findings not only advance our understandings of the nano‐bio interactions in kidneys but also offer a new pathway to noninvasively image kidney dysfunction and local injuries at the anatomical level.     

Biogenic synthesis of gold and silver nanoparticles used in environmental applications: A review

Due to their physical, chemical, optical, and mechanical properties, metallic nanoparticles (MNPs) are increasingly being used, with an emphasis on silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs). In recent years, green synthesis has gained prominence for exploring the use of naturally available biological sources for the obtention of metallic nanoparticles. Among these, algae and plants stand out due to the presence of polysaccharides, proteins, polyphenols, and vitamins (among others) in their composition, which can act in the reduction and stabilisation of MNPs, and these biogenic materials have been characterised mainly by spectrometric and microscopic techniques. In addition, due to the numerous advantages of nanoparticles (NPs) synthetize from biogenic source, such as their simplicity and cost benefits, they have been used in the development of sensors applied in the determination of contaminants present in environmental samples and in the catalytic reduction of organic and inorganic contaminants. Therefore, this review describes the synthesis, mechanisms, characterization, and environmental analytical applications of NPs obtained by biogenic synthesis as well as the perspectives and challenges of these NPs.     

A Cell-Culture Technique to Encode Glyco-Nanoparticles Selectivity

Nanoparticles (NPs) embedded with bioactive ligands such as carbohydrates, peptides, and nucleic acid have emerged as a potential tool to target biological processes. Traditional in vitro assays performed under statistic conditions may result in non-specific outcome sometimes, mainly because of the sedimentation and self-assembly nature of NPs. Inverted cell-culture assay allows for flexible and accurate detection of the receptor-mediated uptake and cytotoxicity of NPs. By combining this technique with glyco-gold nanoparticles, cellular internalization and cytotoxicity were investigated. Regioselective glycosylation patterns and shapes of the NPs could tune the receptors′ binding affinity, resulting in precise cellular uptake of gold nanoparticles (AuNPs). Two cell lines HepG2 and HeLa were probed with galactosamine-embedded fluorescent AuNPs, revealing significant differences in cytotoxicity and uptake mechanism in upright and invert in vitro cell-culture assay, high-specificity toward uptake, and allowing for a rapid screening and optimization technique.     

Dimerization of Organic Dyes on Luminescent Gold Nanoparticles for Ratiometric pH Sensing

Synergistic effects arising from the conjugation of organic dyes onto non‐luminescent metal nanoparticles (NPs) have greatly broadened their applications in both imaging and sensing. Herein, we report that conjugation of a well‐known pH‐insensitive dye, tetramethyl‐rhodamine (TAMRA), to pH‐insensitive luminescent gold nanoparticles (AuNPs) can lead to an ultrasmall nanoindicator that can fluorescently report local pH in a ratiometric way. Such synergy originated from the dimerization of TAMRA on AuNPs, of which geometry was very sensitive to surface charges of the AuNPs and can be reversely modulated through protonation of surrounding glutathione ligands. Not limited to pH‐insensitive dyes, this pH‐dependent dimerization can also enhance the pH sensitivity of fluorescein, a well‐known pH‐sensitive dye, within a larger pH range, opening up a new pathway to design ultrasmall fluorescent ratiometric nanoindicators with tunable wavelengths and pH response ranges.     

Microwave-Assisted Green Synthesis of Gold Nanoparticles Using Olibanum Gum (Boswellia serrate) and its Catalytic Reduction of 4-Nitrophenol and Hexacyanoferrate (III) by Sodium Borohydride

In this work we report straightforward, an economically viable, one-step microwave-assisted green synthesis of well stabilized gold nanoparticles (AuNPs) by reducing chloroauric acid with natural water soluble olibanum gum (Boswellia serrate). The olibanum gum acts as a dual role of reducing and capping agent for synthesis of AuNPs. The formation of AuNPs was confirmed using UV–Vis spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction, transmission electron microscopy and electron diffraction. The results indicated that the synthesized NPs were well dispersed and spherical in shape had an average diameter of 3 ± 2 nm. The reaction parameters significantly affected the formation of NPs, as the concentration of gum and irradiation time increases the formation of NPs particles increases and size of particles are reduced. In addition, it has been shown that these olibanum gum capped AuNPs functioned as effective homogeneous catalyst for the reduction of two model reactions hexacyanoferrate(III) and 4-nitrophenol by sodium borohydride. The kinetic investigations were carried out at different amount of AuNPs and different temperatures.     

NaBH4-induced assembly of immobilized Au nanoparticles into chainlike structures on a chemically modified glass surface

A facile method of obtaining chainlike assemblies of gold nanoparticles (AuNPs) on a chemically modified glass surface based on NaBH(4) treatment is developed. Citrate-stabilized AuNPs (17 nm) are immobilized on a glutaraldehyde-functionalized glass surface and assembled into chainlike structures after treatment with aqueous sodium borohydride (NaBH(4)) solution. The production and morphology of the AuNP chainlike assemblies are controlled by the density of the immobilized NPs, the concentration of NaBH(4) solution, and the treatment time. The AuNP assemblies are stable in water and can undergo drying. X-ray photoelectron spectroscopic data show that the number of citrate ions on the AuNPs decreased by 43% after treatment with 5 mg/mL NaBH(4) solution. The NaBH(4)-induced partial removal of the citrate ions and the roughness of the glass surface greatly affect the binding force of AuNPs on the substrate. The immobilized AuNPs begin to move at the solid-liquid interface without desorbing when the strength of the binding force was decreased. These mobile NPs form chainlike assemblies under the driving force of van der Waals interaction and diffusion. This interface-based formation of chainlike assemblies of AuNPs may provide a simple protocol for the 1D assembly of other Au-coated colloidal nanoparticles.     

Bottom‐Up Meets Top‐Down: Patchy Hybrid Nonwovens as an Efficient Catalysis Platform

Heterogeneous catalysis with supported nanoparticles (NPs) is a highly active field of research. However, the efficient stabilization of NPs without deteriorating their catalytic activity is challenging. By combining top‐down (coaxial electrospinning) and bottom‐up (crystallization‐driven self‐assembly) approaches, we prepared patchy nonwovens with functional, nanometer‐sized patches on the surface. These patches can selectively bind and efficiently stabilize gold nanoparticles (AuNPs). The use of these AuNP‐loaded patchy nonwovens in the alcoholysis of dimethylphenylsilane led to full conversion under comparably mild conditions and in short reaction times. The absence of gold leaching or a slowing down of the reaction even after ten subsequent cycles manifests the excellent reusability of this catalyst system. The flexibility of the presented approach allows for easy transfer to other nonwoven supports and catalytically active NPs, which promises broad applicability.     

Using selenium-conjugated polyethylene glycol to enhance the stability of gold nanoparticles in biologically relevant samples

Using stabilizing agents to maintain the physicochemical properties of colloids in complex environments is crucial for their realworld applications. In this article, we describe how selenium-(Se-) terminated polyethylene glycol(PEG) can serve as a highaffinity stabilizing agent for gold nanoparticles(AuNPs). Compared to Au NPs modified with standard thiolated PEG(S-PEG),Se-PEG-coated Au NPs are much more stable under extreme conditions such as high/low pH, high salt content, and high temperatures. We demonstrate that the Se anchor can prevent the dissociation of PEG ligands from Au NP surfaces in living cells,where a higher concentration of biothiols is usually present. These results indicate that Se-PEG is an excellent stabilizing agent that may facilitate further studies on metal NPs for various complex and physiological systems.     

Preparation of polymer-supported gold nanoparticles based on resins containing ionic liquid-like fragments: easy control of size and stability

Crosslinked polymers containing covalently attached functional sites with chemical structures related to those present in ILs and having macroscopic properties very similar to the ones of the corresponding bulk ILs can be advantageously applied to the preparation of gold nanoparticles (AuNPs). The size and morphology of the resulting metal nanoparticles (MNPs) can be easily modulated through a proper combination of the synthetic method used for the generation of the NPs and the structural elements of the polymer. Additionally, the resulting supported AuNPs are demonstrated to be stable for at least eight months with the vials open to the atmosphere. Several synthetic methodologies have been studied, as well as different structural parameters for the functional polymers. Those include the chemical nature (anions and cations) and loading of the ionic liquid-like fragments and the morphology of the polymeric matrix. The results obtained show the potential to prepare supported AuNPs with narrow size distributions and small diameters that can have potential interest for application in different fields.     

Amphiphilic Janus gold nanoparticles via combining "solid-state grafting-to" and "grafting-from" methods

Despite the great efforts that have been made toward obtaining Janus architectures, synthesizing sub-10 nanometer Janus nanoparticles (NPs) modified with different types of polymers remains a challenging task. In this Communication, "solid-state grafting-to" and "grafting-from" methods were combined to obtain Janus gold NPs (AuNPs) modified with two types of polymer chains on the opposite sides of the NP. We used functionalized polymer single crystals as the solid substrates to immobilize AuNPs. We then used atom transfer radical polymerization to grow polymer chains on the "free" side of the AuNPs. Amphiphilic polyethylene oxide (PEO)-Au-poly(methyl methacrylate), PEO-Au-poly(tert-butyl acrylate) and hydrophilic PEO-Au-poly(acrylic acid) were synthesized. The Janus nature was demonstrated using a platinum-nanoparticle-decoration method. Using polymer single crystals as the reaction substrates is advantageous because they afford higher throughput compared with self-assembled monolayers. Dissolution of the single crystal also leads to NPs with defined polymer patches. We anticipate that our approach could serve as a generic method for synthesizing polymer-functionalized, sub-10 nm Janus NPs. This unique system holds promises for achieving controlled assembly and tunable optic and electronic properties of NPs.     

Functionalized carbon dots as sensors for gold nanoparticles in spiked samples: Formation of nanohybrids

This paper reports the synthesis, passivation and functionalization of luminescent carbon dots (CDs) possessing surface thiol ending groups. A simple procedure involving amidation of passivated carbon dots (p-CDs) with cysteamine boosts their photoluminescent properties and enables their use as easily controlled fluorescent nanosensors for determining citrate–gold nanoparticles (AuNPs). The mechanism behind the quenching phenomenon was established from fluorescence measurements at high temperatures and lifetime tests, and found to involve static quenching leading to the formation of CD–AuNP nanohybrids. A method for determining AuNPs in complex matrices was developed and validated by application to spiked drinking water and mussel tissues. The limits of detection and quantitation for AuNPs thus obtained were 0.20 and 0.66 nmol L^–1, respectively.     

Fluorescence imaging for in situ detection of cell surface sialic acid by competitive binding of 3-(dansylamino)phenylboronic acid

Sialic acid (SA) usually locates at the terminal position of the sugar chains on cell membranes, and its expression level is closely associated with cancer. Here polysialic acid (PSA) embedded gold nanoparticles (AuNPs) were prepared and functionalized with fluorescent 3-(dansylamino)phenylboronic acid (DAPB) for in situ imaging and detection of cell surface SA. The fluorescence resonance energy transfer (FRET) from DAPB to AuNPs quenched the fluorescence of DAPB. In the presence of additional SA or SA-abundant cells, the competitive binding of DAPB with SA and PSA led to the release of the assembled DAPB from the surface of PSA-embedded AuNPs, resulting in fluorescence of DAPB on SA-abundant cell surface. The proposed methods realized the in situ imaging and monitoring of cell surface SA, and could also be applied to the quantification of cell number and the amounts of cell surface SA. This work not only proposed a convenient visualization method for the analysis of SA on cell membranes, but also provided a potential tool for accelerating the elucidation of the basic role of SA in various biological processes and development of anti-cancer therapies.     

Green Synthesis of Fe and Fe/Pd Bimetallic Nanoparticles in Membranes for Reductive Degradation of Chlorinated Organics

Membranes containing reactive nanoparticles (Fe and Fe/Pd) immobilized in a polymer film (polyacrylic acid, PAA-coated polyvinylidene fluoride, PVDF membrane) are prepared by a new method. In the present work a biodegradable, non-toxic -"green" reducing agent, green tea extract was used for nanoparticle (NP) synthesis, instead of the well-known sodium borohydride. Green tea extract contains a number of polyphenols that can act as both chelating/reducing and capping agents for the nanoparticles. Therefore, the particles are protected from oxidation and aggregation, which increases their stability and longevity. The membrane supported NPs were successfully used for the degradation of a common and highly important pollutant, trichloroethylene (TCE). The rate of TCE degradation was found to increase linearly with the amount of Fe immobilized on the membrane, the surface normalized rate constant (k(SA)) being 0.005 L/m(2)h. The addition of a second catalytic metal, Pd, to form bimetallic Fe/Pd increased the k(SA) value to 0.008 L/m(2)h. For comparison purposes, Fe and Fe/Pd nanoparticles were synthesized in membranes using sodium borohydride as a reducing agent. Although the initial k(SA) values for this case (for Fe) are one order of magnitude higher than the tea extract synthesized NPs, the rapid oxidation reduced their reactivity to less than 20 % within 4 cycles. For the green tea extract NPs, the initial reactivity in the membrane domain was preserved even after 3 months of repeated use. The reactivity of TCE was verified with "real" water system.     

Catalytic reduction of 4-nitrophenol using biogenic gold and silver nanoparticles derived from Breynia rhamnoides

A simple, green method is described for the synthesis of Gold (Au) and Silver (Ag) nanoparticles (NPs) from the stem extract of Breynia rhamnoides. Unlike other biological methods for NP synthesis, the uniqueness of our method lies in its fast synthesis rates (~7 min for AuNPs) and the ability to tune the nanoparticle size (and subsequently their catalytic activity) via the extract concentration used in the experiment. The phenolic glycosides and reducing sugars present in the extract are largely responsible for the rapid reduction rates of Au(3+) ions to AuNPs. Efficient reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) in the presence of AuNPs (or AgNPs) and NaBH(4) was observed and was found to depend upon the nanoparticle size or the stem extract concentration used for synthesis.     

Recent advances in nanomaterial‐based capillary electrophoresis

This review gives a summary of applications of different nanomateials, such as gold nanoparticles (AuNPs), carbon‐based nanoparticles, magnetic nanoparticles (MNPs), and nano‐sized metal organic frameworks (MOFs), in electrophoretic separations. This review also emphasizes the recent works in which nanoparticles (NPs) are used as pseudostationary phase (PSP) or immobilized on the capillary surface for enhancement of separation in CE, CEC, and microchips electrophoresis.     

Controlled UV-C light-induced fusion of thiol-passivated gold nanoparticles

Thiol-passivated gold nanoparticles (AuNPs) of a relatively small size, either decorated with chromophoric groups, such as a phthalimide (Au@PH) and benzophenone (Au@BP), or capped with octadecanethiol (Au@ODCN) have been synthesized and characterized by NMR and UV-vis spectroscopy as well as transmission electron microscopy (TEM). These NPs were irradiated in chloroform at different UV-wavelengths using either a nanosecond laser (266 and 355 nm, ca. 12 mJ/pulse, 10 ns pulse) or conventional lamps (300 nm < λ < 400 nm and ca. 240 nm < λ < 280 nm) and the new AuNPs were characterized by X-ray and UV-vis spectroscopy, as well as by TEM. Laser irradiation at 355 nm led to NP aggregation and precipitation, while the NPs were photostable under UV-A lamp illumination. Remarkably, laser excitation at 266 nm induced a fast (minutes time-scale) increase in the size of the NPs, producing huge spherical nanocrystals, while lamp-irradiation at UV-C wavelengths brought about nanonetworks of partially fused NPs with a larger diameter than the native NPs.     

Gold nanoparticles functionalized with supramolecular macrocycles

Cold nanoparticles(AuNPs) functionalized with supiamolecular macrocycles are versatile and diverse hybrid nanoinaterials,which combine and enhance the characteristics of the two components.In this mini-review,we summarize the recent research progress on the synthesis and assembly of AuNPs functionalized with different supramoleciilar macrocyclic compounds,i.e.,crown ethers,cyclophanes, cyclodextrins(CDs),cucurbit[n]urils(CB[n]),calix[n]arenes,and pillar[n]arenes(P[n]A).Meanwhile, applications of these supramoleciilar hybrid nanomaterials in the fields of sensors,biomedicine and plasmonic devices are also presented.