Synthesis of Vinyl Polymer—Poly (α-Amino Acid) Block Copolymers by End-Reactive Oligomers

In order to synthesize block copolymers consisting of segments having dissimilar properties, vinyl polymer - poly (α-amino acid) block copolymers were synthesized by two different methods. In the first method, the terminal amino groups of polysarcosine, poly(γ-benzyl L-glutamate), and poly(γ-benzyloxycarbonyl-L-lysine) were haloacetylated. The mixture of the terminally haloacetylated poly (α-amino acid) and styrene or methyl methacrylate was photoirradiated in the presence of Mo (CO)₆ or heated with Mo(CO)₆, yielding A-B-A-type block copolymers consisting of poly(α-amino cid) (the A component) and vinyl polymer(the B component). The characterization of block copolymers revealed that the thermally initiated polymerization of vinyl compounds by the trichloroacetyl poly(α-amino acid)/Mo(CO)₆ system was most suitable for the synthesis of vinyl polymer - poly-(α-amino acid) block copolymers. In the second method, poly (methyl methacrylate) and polystyrene having a terminal amino group were synthesized by the radical polymerization in the presence of 2-mercaptoethylammonium chloride. Using these polymers having a terminal amino group as an initiator, the block polymerizations of γ-benzyl L-glutamate NCA and e-benzyloxycarbonyl-L-lysine NCA were carried out, yielding A-B-type block copolymer. By eliminating the protecting groups of the side chains of poly(α-amino acid) segment, block copolymers such as poly(methyl methacrylate) with poly(L-glutamic acid) or poly(L-lysine) and polystyrene with poly(L-glutamic acid) and poly(L-lysine) were successfully synthesized.     

Ultrasonic Modification of Polymers. II. Degradation of Polystyrene,Substituted Polystyrene,and Poly(n-vinyl Carbazole) in the Presence of Flexible Chain Polymers

Abstract

Ultrasonic (20 kHz, 70 W) solution degradations of polystyrene, substituted polystyrenes, and poly(n-vinyl carbazole) have been carried in toluene and tetrahydrofuran at 27 and -20°C in the presence of flexible chain polymers. Polystyrene formed block copolymers at 27°C with stiff-chain polymer PVCz; however, in the presence of flexible chain polymers, e.g., poly(vinyl methyl ketone) or poly(vinyl methyl ether), there were no block copolymers formed. Poly(n-vinyl carbazole) does not seem to form any block copolymers at 27°C with flexible chain polymers, e.g., poly(octadecyl methacrylate) and poly(ethyl methacrylate). Poly(p-chlorostyrene) and poly(p-methoxystyrene) also do not form block copolymers at 27°C with poly(octadecyl methacrylate) but do so with poly(hexadecyl methacrylate). It is quite possible that these may only be blends of two homopolymers. Poly(octa-decyl methacrylate) does yield a block copolymer when sonicated at -15°C with poly(p-isopropyl α-methylstyrene).     

Preparation of block copolymers from occluded vinyl acetate macroradicals

Stable vinyl acetate macroradicals were produced by polymerization in a nonviscous poor solvent, a viscous good solvent and a viscous poor solvent. These macroradicals were then allowed to react with a second vinyl monomer to produce block copolymers. The formation of block copolymers was monitored for rate and yield data. The block copolymers produced were poly(vinyl acetate-b-methyl methacrylate), poly(vinyl acetate-b-acrylic acid), poly(vinyl acetate-b-vinylpyrrolidone), poly(vinyl acetate-b-acrylonitrile), poly(vinyl acetate-b-styrene), and poly(vinyl acetate-b-methyl acrylate). The block copolymers were characterized by yield, precipitation in selected solvents, pyrolysis gas chromatography, and differential scanning calorimetry.     

Synthesis of poly(vinyl ether)‐based,ABA triblock‐type thermoplastic elastomers with functionalized soft segments and their gas permeability

The ABA‐type triblock copolymers consisting of poly(2‐adamantyl vinyl ether) [poly(2‐AdVE)] as outer hard segments and poly(6‐acetoxyhexyl vinyl ether) [poly(AcHVE)], poly(6‐hydroxyhexyl vinyl ether) [poly(HHVE)], or poly(2‐(2‐methoxyethoxy)ethyl vinyl ether) [poly(MOEOVE)] as inner soft segments were synthesized by sequential living cationic polymerization. Despite the presence of polar functional groups such as ester, hydroxyl, and oxyethylene units in their soft segments, the block copolymers formed elastomeric films. The thermal and mechanical properties and morphology of the block copolymers showed that the two polymer segments of these triblock copolymers were segregated into microphase‐separated structure. Effect of the functional groups in the soft segments on gas permeability was investigated as one of the characteristics of the new functional thermoplastic elastomers composed solely of poly(vinyl ether) backbones. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1114–1124     

A Grafting Study on Partially Dehydrochlorinated Poly(vinyl chloride) by Atom Transfer Radical Polymerization

HCl elimination in low ratio was first carried out from poly(vinyl chloride) to increase allylic chlorines. Partially dehydrochlorinated poly(vinyl chloride), having a macroinitiator effect, was grafted with tert‐butyl methacrylate via atom transfer radical polymerization in the presence of CuBr/2,2′‐bipyridine at 64°C in tetrahydrofuran. Original poly(vinyl chloride) was also grafted with tert‐butyl methacrylate under the same conditions to compare with that of partially dehydrochlorinated poly(vinyl chloride). The graft copolymers were characterized by elemental analysis, FTIR, ¹H and ¹³C‐NMR, differential scanning calorimetry, and gel permeation chromatography (GPC). Thermal stabilities of the graft copolymers were investigated by thermogravimetric analysis as compared with those of the macroinitiators.     

Solution polymerization of vinyl monomers in the presence of poly(N-acetyliminoethylene) macroazoinitiators

New block copolymers with poly(N-acetyliminoethylene) and vinyl sequences were obtained by a two-step synthetic approach. In the first stage macroinitiators of poly(N-acetyliminoethylene) type, with azo groups inserted in the main chain, were prepared. They were latter used in the radical polymerization of some vinyl monomers [styrene, methacrylic acid, methyl methacrylate, butyl methacrylate, β-(N-carbazolyl)ethyl acrylate, β-(methacryloyfoxy)ethyl 3,5-dinitrobenzoate]. The resulting block copolymers were characterized by spectral methods, elemental analysis, gel permeation chromatography, and electron microscopy. The kinetic study of the thermal and photochemical decomposition of the synthesized macroazoinitiators, as well as the polymerization data, suggest a dependence of their initiating efficiency on the length of the poly(N-acetyliminoethylene) segments. © 1994 John Wiley & Sons, Inc.     

Molecular Engineering of Liquid Crystal Polymers by Living Polymerization. XXIII. Synthesis and Characterization of AB Block Copolymers Based on ω-[(4-Cyano-4′ -Biphenyl)-oxy]alkyl Vinyl Ether, 1H, 1H, 2H, 2H-Perfluorodecyl Vinyl Ether,and 2-(4-Blphenyloxy)ethyl Vinyl Ether with 1H, 1H, 2H, 2H-Perfluorodecyl Vinyl Ether

Abstract

This paper describes the synthesis and characterization of AB block copolymers based on ω-[(4-cyano-4′-biphenyl)oxy]alkyl vinyl ether (6-n), with alkyl being ethyl (6-2), propyl (6-3), nonyl (6-9), and undecanyl (6-11), with 1H, 1H, 2H, 2H-perfluorodecyl vinyl ether (CF8), poly[(-6-n)-b-CF8]X/Y (where X/Y refers to the weight ratio of the two segments), and of 2-(4-biphenyloxy)ethyl vinyl ether (BEVE) with 1H,-1H, 2H, 2H-perfluorodecyl vinyl ether, poly[BEVE-b-CF8]X/Y. They were prepared by living cationic polymerization and exhibit a narrow molecular weight distribution. All block copolymers display a micro-phase-separated morphology when the A segment is in the liquid crystalline phase. Block copolymers based on 6-2, 6-3, and BEVE with CF8 also exhibit a microphase-separated morphology in the melt phase of A and B blocks.     

Synthesis of poly(vinyl acetate)‐b‐polystyrene and poly(vinyl alcohol)‐b‐polystyrene copolymers by cobalt‐mediated radical polymerization

Well‐defined poly(vinyl acetate) macroinitiators, with the chains thus end‐capped by a cobalt complex, were synthesized by cobalt‐mediated radical polymerization and used to initiate styrene polymerization at 30 °C. Although the polymerization of the second block was not controlled, poly(vinyl acetate)‐b‐polystyrene copolymers were successfully prepared and converted into amphiphilic poly(vinyl alcohol)‐b‐polystyrene copolymers by the methanolysis of the ester functions of the poly(vinyl acetate) block. These poly(vinyl alcohol)‐b‐polystyrene copolymers self‐associated in water with the formation of nanocups, at least when the poly(vinyl alcohol) content was low enough. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 81–89, 2007     

Living Cationic Polymerization of α-Methylstyrene. 2. Synthesis of Block and Random Copolymers with 2-Chloroethyl Vinyl Ether and End-Functionauzed Polymers†

Abstract

Both AB and BA block copolymers of α-methylstyrene (αMeSt) and 2-chloroethyl vinyl ether (CEVE) were synthesized by the sequential living cationic polymerization initiated with the HCl-CEVE adduct (1a)/SnBr₄ system in CH₂Cl₂ at -78°C. αMeSt-CEVE (AB) block copolymers with narrow molecular weight distributions ([Mbar]_w/[Mbar]_n ～ 1.15) were obtained when αMeSt was polymerized first, followed by addition of CEVE to the resulting αMeSt living polymer solution. The reverse order of monomer addition, from CEVE to αMeSt, also led to a BA-type block copolymer. In the polymerization of a mixture of the two monomers, almost random copolymers were obtained. Living polymerizations of αMeSt were also induced with functional initiating systems, HCl-functionalized vinyl ether adducts (1b-1d)/SnBr₄, to give end-function-alized poly(αMeSt)s with a methacrylate, an acetate, or a phthalimide terminal.     

Precise synthesis of thermo-responsive and water-soluble star-branched polymers and star block copolymers by living anionic polymerization

A series of thermo-responsive and water-soluble 4- and 8-arm star-branched poly(2-(2′-methoxyethoxy)ethyl methacrylate) (poly(1)) with well-defined structures were synthesized by living anionic polymerization of 1, followed by a linking reaction with a core compound substituted with either four or eight benzyl bromide moieties. Furthermore, two kinds of sequentially different 4-arm star block copolymers composed of poly(1)-block-poly ((2,2-dimethyl-1,3-dioxolan-4-yl)methyl methacrylate) (poly(4)) were also synthesized by the same linking reaction of the corresponding AB or BA diblock copolymer anion with a core compound substituted with four benzyl bromide moieties. Thus, both well-defined 4-arm (AB)₄ and (BA)₄ star-block copolymers, whose A and B are poly(1) and poly(4) segments, were successfully synthesized. These star-block copolymers were quantitatively converted to the corresponding 4-arm (AC)₄ and (CA)₄ star-block copolymers with the same compositions by hydrolytic acetal cleavage of the poly(4) segment to poly(2,3-dihydroxypropyl methacrylate) (C segment). Poly(1) segments have LCST values and, on the other hand, both water-insoluble poly(4)s and water-soluble poly(2,3-dihydroxypropyl methacrylate)s are non-thermo-responsive segments. The thermo-responsive behavior of the resulting 4- and 8-arm star-branched poly(1) as well as the 4-arm (AB)₄, (BA)₄, (AC)₄, and (CA)₄ star-branched block copolymers has been extensively studied in terms of molecular weight, arm number, composition, and block sequence. As expected, such variables were observed to affect their LCST values. Interestingly, the thermo-responsive behavior of the 4-arm (AC)₄ and (CA)₄ stars was different from that of the block copolymers used as arm segments.     

Block copolymerization with trapped radicals

Acrylonitrile–styrene, vinyl chloride–styrene and vinyl chloride–methyl methacrylate block copolymers were obtained by employing trapped radicals in polyacrylonitrile or poly(vinyl chloride) formed in a heterogeneous system by tri-n-butylboron in air as initiator. The trapped polymer radicals were activated on addition of dimethylformamide as solvent. Confirmation of block copolymers was carried out with solvent extractions, elementary analysis, and turbidimetry. In block copolymerization, the polyacrylonitrile trapped radical was more active than the poly(vinyl chloride) radical. Results of kinetic studies were used to consider the mechanism of polymerization.     

Grafting of Polymers Having Pendant Peroxycarbonate Groups Onto Carbon Black and Postpolymerization of Vinyl Monomers

Abstract

Postpolymerization of vinyl monomers initiated by pendant peroxycarbonate groups of grafted polymer chains on carbon black (CB) was investigated. The grafting of polymers having pendant peroxycarbonate groups onto CB was achieved by the trapping of polymer radicals formed by the thermal decomposition of copolymers of t-butylperoxy-2-methacryloyloxyethyl-carbonate (HEPO) with vinyl monomers such as vinyl acetate (VAc), styrene (St) and methyl methacrylate (MMA). The copolymers having pendant peroxycarbonate groups were prepared by copolym-erization of HEPO with vinyl monomers using azo initiator under irradiation of UV light at room temperature. The amount of remaining pendant peroxycarbonate groups of the poly(VAc-co-HEPO)-grafted CB obtained from the reaction at 90°C was maximum and decreased above the temperature. Furthermore, the postpolymerization of vinyl monomers, such as St, MMA, and VAc was initiated in the presence of poly(VAc-co-HEPO)-grafted and poly(St-co-HEPO)-grafted CB and the corresponding polymers were postgrafted onto CB to give branched polymer-grafted CB. The percentage of poly(St)-postgrafting (proportion of post-grafted poly(St) to poly(MMA-co-HEPO)-grafted CB used) increased with increasing polymerization time, but became constant at 20% after 4 hours.     

Poly(ether amide) triblock and star block copolymers

Triblock and three arm, poly(ether amide) star block copolymers have been synthesized and characterized. Di- and tri-functional amine terminated polyethers were reacted with caprolactam at elevated temperatures to produce the block copolymers. The polyether amines were incorporated at levels ranging from 5%-40%. Differential scanning calorimetry(DSC) evaluation reveals no reduction in the crystalline melting point of the polycaprolactam end blocks up to 40% polyether incorporation. Dynamic mechanical spectroscopy and FTIR were used to confirm the incorporation of the polyether. A comparison is made between triblock and star block copolymers, and between poly(propylene glycol) and poly(ethylene glycol) polyether midblocks. These block copolymers have improved impact performance as well as a flexural modulus that first increases and then decreases as the amount of polyether is increased in the block copolymer.     

Formation of block copolymers from polyurethanes containing reactive disulfides

Block copolymers containing polyether segments and segments of a vinyl polymer have been synthesized. A low molecular weight polyether terminated with isocyanate groups was condensed with bis-(β-hydroxyethyl disulfide) to give polyurethanes containing reactive disulfide linkages. When this polymer was photolyzed in the presence of a vinyl monomer such as styrene, methyl methacrylate, or acrylonitrile, homolytic cleavage of the disulfide polymerized the monomer, giving block copolymers. The mechanical properties of the products were investigated by means of modulus–temperature measurements.     

Preparation of Graft Copolymers By Means of Uv Photolysis of Poly(Methyl Vinyl Ketone) and Reverse Osmosis Performance of the Membranes from the Oximes of the Copolymers

ABSTRACT

An attempt was made to prepare a graft copolymer consisting of poly(methyl vinyl ketone) (PMVK) as a backbone chain and polyacrylonitrile, poly(4-vinylpyridine), or polystyrene as a graft chain by UV irradiation of a solution of PMKV in the presence of acrylonitrile, 4-vinylpyridine, or styrene. the influence of reaction conditions on the yield, composition, and viscosity of the resulting graft copolymers was investigated. It was suggested from NMR and gel permeation chromatography that those graft copolymers contained a high molecular weight fraction of narrow distribution and block copolymers as well. the reverse osmosis membranes derived from the oxime and amidoxime of the graft copolymers showed a characteristic performance of exhibiting a maximal difference between rejections against NaCl and CoCl₂ at a certain addition ratio of crosslinking agent, which was not observed in the membranes from copolymers by conventional radical copolymerization. the relationship between these phenomena and the branching structure of the graft copolymers was discussed.     

Synthesis of ABA‐triblock and star‐diblock copolymers with poly(2‐adamantyl vinyl ether) and poly(n‐butyl vinyl ether) segments: New thermoplastic elastomers composed solely of poly(vinyl ether) backbones

ABA‐type triblock copolymers and AB‐type star diblock copolymers with poly(2‐adamantyl vinyl ether) [poly(2‐AdVE)] hard outer segments and poly(n‐butyl vinyl ether) [poly(NBVE)] soft inner segments were synthesized by sequential living cationic copolymerization. Although both the two polymer segments were composed solely of poly(vinyl ether) backbones and hydrocarbon side chains, they were segregated into microphase‐separated structure, so that the block copolymers formed thermoplastic elastomers. Both the ABA‐type triblock copolymers and the AB‐type star diblock copolymers exhibited rubber elasticity over wide temperature range. For example, the ABA‐type triblock copolymers showed rubber elasticity from about ?53 °C to about 165 °C and the AB‐type star diblock copolymer did from about ?47 °C to 183 °C with a similar composition of poly(2‐AdVE) and poly(NBVE) segments in the dynamic mechanical analysis. The AB‐type star diblock copolymers exhibited higher tensile strength and elongation at break than the ABA‐type triblock copolymers. The thermal decomposition temperatures of both the block copolymers were as high as 321–331 °C, indicating their high thermal stability. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Oligomers Derived from 2-Oxazolines

This paper describes the synthesis and properties of oligomer chains derived from 2-oxazolines. First, poly(styrene-g-N-acetyl-ethylenimine) was prepared, and its hydrolysis gave poly(styrene-g-ethylenimine) which showed good chelating properties. Secondly, ABA type triblock copolymers were prepared in which an N-acylethylenimine chain is used as A block and ethylene oxide chain is employed as B block. These triblock copolymers showed good compatibility with Nylon 6, which were shown to posecess effective anti-electrostatic properties for Nylon 6. Thirdly, AB type block copolymers from 2-oxazolines have been prepared by using living polymerization technique. These block copolymers are soluble in water and showed good surfactant nature as reflected by surface tension (γ), when A block is consisted from N-acetyl- or N-propionylethylenimine chain (hydro-philic) and B block is made of N-tridecanoyl or N-aroylethylenimine chain (lipophilic). Finally, graft copolymers of cellulose diacetate having N-acetylethylenimine chain were prepared. It has been found by using a rheovibron that these graft copolymers are compatible with poly(vinyl chloride).     

Poly(styrene/pentafluorostyrene)-block-poly(vinyl alcohol/vinylpyrrolidone) amphiphilic block copolymers for kinetic gas hydrate inhibitors: Synthesis,micellization behavior,and methane hydrate kinetic inhibition

Amphiphilic block copolymers of short poly(styrene) (PS) or poly(2,3,4,5,6-pentafluorostyrene) (PPFS) segments with comparatively longer poly(vinyl acetate) or poly(vinylpyrrolidone) (PVP) segments are synthesized using a 2-cyanopropan-2-yl N-methyl-N-(pyridin-4-yl)dithiocarbamate switchable reversible addition–fragmentation chain transfer (RAFT) agent toward application as kinetic gas hydrate inhibitors (KHIs). Polymerization conditions are optimized to provide water-soluble block copolymers by first polymerizing more activated monomers such as S and PFS to form a defined macro chain-transfer agent (linear degree of polymerization with conversion, comparatively low dispersity) followed by chain extensions with less activated monomers VAc or VP by switching to the deprotonated form of the RAFT agent. The critical micelle concentrations of these amphiphilic block copolymers (after VAc unit hydrolysis to vinyl alcohol units) are measured using zeta surface potential measurements to estimate physical behavior once mixed with the hydrates. A PS-poly(vinyl alcohol) block copolymer improved inhibition to 49% compared to the pure methane–water system with no KHIs. This inhibition was further reduced by 27% by substituting the PS with a more hydrophobic PPFS. A block copolymer of PS–PVP exhibited 20% greater inhibition than the PVP homopolymer and substituting PS with a more hydrophobic PPFS resulted in a 35% further decreased in methane KHI. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2445–2457, 56, 2445–2457     

Amphiphilic block copolymer self‐assemblies of poly(NVP)‐b‐poly(MDO‐co‐vinyl esters): Tunable dimensions and functionalities

Functional, degradable polymers were synthesized via the copolymerization of vinyl acetate (VAc) and 2‐methylene‐1,3‐dioxepane (MDO) using a macro‐xanthate CTA, poly(N‐vinylpyrrolidone), resulting in the formation of amphiphilic block copolymers of poly(NVP)‐b‐poly(MDO‐co‐VAc). The behavior of the block copolymers in water was investigated and resulted in the formation of self‐assembled nanoparticles containing a hydrophobic core and a hydrophilic corona. The size of the resultant nanoparticles was able to be tuned with variation of the hydrophilic and hydrophobic segments of the core and corona by changing the incorporation of the macro‐CTA as well as the monomer composition in the copolymers, as observed by Dynamic Light Scattering, Static Light Scattering, and Transmission Electron Microscopy analyses. The concept was further applied to a VAc derivative monomer, vinyl bromobutanoate, to incorporate further functionalities such as fluorescent dithiomaleimide groups throughout the polymer backbone using azidation and “click” chemistry as postpolymerization tools to create fluorescently labeled nanoparticles. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2699–2710     

Synthesis of biocompatible and biodegradable block copolymers of polyvinyl alcohol‐block‐poly(ε‐caprolactone) using metal‐free living cationic polymerization

Applications of metal‐free living cationic polymerization of vinyl ethers using HCl · Et₂O are reported. Product of poly(vinyl ether)s possessing functional end groups such as hydroxyethyl groups with predicted molecular weights was used as a macroinitiator in activated monomer cationic polymerization of ε‐caprolactone (CL) with HCl · Et₂O as a ring‐opening polymerization. This combination method is a metal‐free polymerization using HCl · Et₂O. The formation of poly(isobutyl vinyl ether)‐b‐poly(ε‐caprolactone) (PIBVE‐b‐PCL) and poly(tert‐butyl vinyl ether)‐b‐poly(ε‐caprolactone) (PTBVE‐b‐PCL) from two vinyl ethers and CL was successful. Therefore, we synthesized novel amphiphilic, biocompatible, and biodegradable block copolymers comprised polyvinyl alcohol and PCL, namely PVA‐b‐PCL by transformation of acid hydrolysis of tert‐butoxy moiety of PTBVE in PTBVE‐b‐PCL. The synthesized copolymers showed well‐defined structure and narrow molecular weight distribution. The structure of resulting block copolymers was confirmed by ¹H NMR, size exclusion chromatography, and differential scanning calorimetry. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5169–5179, 2009