Study on the synthesis of novel fluorescent macrocyclic sensors and their sensitive properties for Cu2+ and Fe3+ in aqueous solution

In this work, we synthesised and characterised three novel fluorescence macrocyclic sensors containing optically active dansyl groups. The studies for the interaction of the synthesised compounds with various mental ions (Li⁺, Na⁺, K⁺, Ag⁺, Mg²⁺, Ca²⁺, Ba²⁺, Pb²⁺, Zn²⁺, Co²⁺, Cd²⁺, Hg²⁺, Ni²⁺, Cu²⁺, Mn²⁺, Cr³⁺, Al³⁺, Fe³⁺) were performed by fluorescence titration, Job’s plot, ESI-MS and DFT calculations. The results showed that the sensors 1a–1c displayed selective recognition for Cu²⁺ and Fe³⁺ ions and formed stoichiometry 1:1 complex through PET mechanism in DMSO/H₂O solution (1:1, v/v, pH 7.4 of HEPES). The binding constant (K) and detection limit were calculated.     

Novel naphthalene-based fluorescent chemosensors for Cu2+ and Fe3+ in aqueous media

Three novel compounds bearing 2,7-dihydroxylnaphthalene capable of detecting Cu²⁺ or Fe³⁺ have been synthesised based on photoinduced electron transfer. The ability of these compounds for complex transition metal ions has been studied, and complex stoichiometry for Cu²⁺ and Fe³⁺ complex has been determined in the Tris–HCl (0.01 M DMSO/H₂O (v/v) 1:1, buffer, pH 7.4) solution system by fluorescence titration experiments. These chemosensors form a 1:1 complex with Cu²⁺ or Fe³⁺ and show a fluorescent quenching with a binding constant of (4.46 ± 0.29) × 10³ and (8.04 ± 0.26) × 10⁴, respectively.     

Chromenone-rhodamine conjugate for naked eye detection of Al3+ and Hg2+ ions in semi aqueous medium

Chromenone-rhodamine conjugate 1 has been synthesized and its metal ion binding properties have been studied in CH₃CN/water (3:1, v/v; 10 mM HEPES buffer; pH = 6.85). Compound 1 senses multiple metal ions such as Al³⁺ and Hg²⁺ by exhibiting turn on fluorescence and color change (colorless to pink). Al³⁺ and Hg²⁺ ions have been distinguished with the aid of tetrabutylammonium iodide (TBAI). While in the presence of I^? the pink color of the 1.Hg²⁺ complex was completely discharged; under identical conditions the pink color of 1.Al³⁺ complex was retained.     

A new lawsone azo-dye for optical sensing of Fe3+ and Cu2+ and their DFT study

A new lawsone-based azo-dye 2-hydroxy-3-((pyridin-2-ylmethyl)diazenyl)naphthalene-1,4-dione (1) was synthesized and applied for sensing of metal ions. Receptor 1 showed selective fluorescent and colorimetric response for the detection of Cu²⁺ and Fe³⁺ over other tested metal ions. The fluorescence intensity of 1 was significantly quenched allowing detection of Fe³⁺ and Cu²⁺ down to 0.61 and 6.06 μM, respectively. The binding has been established by fluorescence spectroscopic method. Receptor 1 provided a 1?:?1 binding scaffold for recognition of Fe³⁺ and Cu²⁺ ions with the association constant of 3.33 × 10⁶ and 3.33 × 10⁵ M^?1, respectively. The B3LYP/6-31G/LANL2DZ method was employed for the optimization of 1 and 1·Fe³⁺ and 1·Cu²⁺.     

Naphthalene and pyrrole substituted guanidine in selective sensing of Cu2+, Hg2+, Pb2+ and CN− ions under different conditions

Naphthalene and pyrrole substituted guanidine 1 has been designed and synthesised. Compound 1 efficiently distinguishes Cu²⁺, Hg²⁺ and Pb²⁺ ions by exhibiting different responses in fluorescence. While compound 1 exhibited turn-on emission selectively in the presence of Hg²⁺ and Pb²⁺ ions in CH₃CN and CH₃CN–H₂O (1:1, v/v), respectively, it showed decrease in emission upon interaction with Cu²⁺ ion in CH₃CN. Furthermore, the Cu-1 ensemble has been established as a potential probe for selective detection of CN^? ion over a series of other anions involving colour change (in ordinary light: colourless to light yellow and under UV light: colourless to sky blue). Theoretical insight has been invoked to understand the mode of metal–ligand interaction.     

ABSORPTIVE IONOPHORES FOR Fe3+ CATION BY PARENT CALIX[n]ARENES

The absorption of Fe³⁺ ion from the aqueous phase to the solid phase was carried out by using p-tert-butyl calix[6]arene (L₁), calix[6]arene (L₂), p-tert-butyl calix[8]arene (L₃), and calix[8]arene (L₄). The effect of varying pH upon the absorption capability of parent calixarenes was examined. It was found that the compounds (L₁, L₂, L₃, and L₄) showed the highest extractability toward Fe³⁺ ion at 4.5–5.4. The calixarene L₂ shows a strong binding ability to Fe³⁺ ion. Based on the continuous variation method, calixarene L₂ formed 1:1 complex with Fe³⁺ ion.     

Electrically induced fluorescence Fe sensing behavior of nanostructured Tiron doped polypyrrole

Nanostructured polypyrrole (PPy) film doped with Tiron was electrodeposited from aqueous solution on the surface of transparent electrode and used for sensitive, selective and rapid electrically controlled fluorescence detection of Fe³⁺ in aqueous media. The fluorescence intensity of PPy-Tiron film decreases linearly in the presence of Fe³⁺ by applying negative potential over a concentration range from 5.0 × 10⁻⁸ to 1.0 × 10⁻⁶ mol L⁻¹, with a relatively fast response time of less than 30 s at pH 7.4. The detection is not affected by the coexistence of other competitive metal ions such as Al³⁺, Ce³⁺, Tl³⁺, La³⁺, Bi³⁺, Cr²⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺. The proposed electro-fluorescence sensor has a potential application to the determination of Fe³⁺ in environmental and biological systems. The fluorescent thin film sensor was also used as a novel probe for Fe³⁺/Fe²⁺ speciation in aqueous solution.     

A highly selective fluorescent chemosensor for Fe (III) based on rhodamine 6G dyes derivative

A new fluorescent probe L based on the rhodamine 6G platforms for Fe³⁺ has been designed and synthesised. L showed excellent selectivity and high sensitivity for Fe³⁺ against other metal ions such as K⁺, Na⁺, Ag⁺, Cu²⁺, Co²⁺, Mg²⁺, Cd²⁺, Ni²⁺, Zn²⁺, Fe²⁺, Hg²⁺, Ce³⁺ and Y³⁺ in HEPES buffer (10 mM, pH 7.4)/CH₃CN (40:60, V/V). The distinct color change and the rapid emergence of fluorescence emission provided naked-eyes detection for Fe³⁺. The recognition mechanism of the probe toward Fe³⁺ was evaluated by Job’s plots, IR and ESI-MS. In order to further study their fluorescent properties, L + Fe³⁺ fluorescence lifetime was also measured. Moreover, the test strip results showed that these probes could act as a convenient and efficient Fe³⁺ test kit.     

Photo-physical aspects of BODIPY-coumarin conjugated sensor and detection of Al3+ in MCF-7 cell

ABSTRACT

BODIPY azine bearing chemosensor R1 has been synthesised for selective detection of Al³⁺with visual colour change from red-purple to purple and photo-physical studies were explained through Förster Resonance Energy Transfer (FRET) mechanism. Chemosensor showed good sensing capability with high binding constant and lower Limit of Detection (LOD) towards Al³⁺. Cell viability and fluorescence microscopic experiments illustrated about the cytocompatibily of the sensor in presence of Al³⁺ in living cells (MCF-7).     

Phenanthroline-based fluorescence sensors for Eu3+ ion and subsequent enantioselective discriminating of malate

A pair of novel chiral fluorescent and colorimetric sensors L1 and D1 had been designed and synthesized, which were based on phenanthroline as the fluorophore and mandelohydrazide as the binding site. They showed selective recognition toward Eu³⁺ ion as ‘turn-off’ mode in DMSO-H₂O solution (v/v = 1:5, 10 mM HEPES, pH = 7.4). The fluorescence discrimination towards chiral carboxylate anions had been studied for L1-Eu³⁺ and D1-Eu³⁺ complex and they showed good enantioselective recognition ability towards malate as ‘turn-on’ mode. The interaction of sensor L1, D1 with Eu³⁺ and L1-Eu³⁺, D1-Eu³⁺ towards malate caused different color changes in the naked eye.     

A selective turn-on fluorescent sensor for Fe and application to bioimaging

A novel compound FD1 was demonstrated as a turn-on fluorescent sensor for imaging of iron(III) ion in biological samples. Based on the spirolactam (nonfluorescence) to ring-open amide (fluorescence) equilibrium, FD1 exhibited high selectivity and sensitivity for Fe³⁺ over other metal ions. Moreover, fluorescent microscopy experiments further established that FD1 could be used for sensing Fe³⁺ within living cells.     

Investigation of structure of Fe3+ magnetic center in polyparaphenylene

In the temperature range between 4.2 and 300 K, the EPR spectrum of the impurity Fe³⁺ ion in the organic polyparaphenylene has been investigated. An effect developed as an unusual temperature change of Fe³⁺ EPR spectrum has been revealed. The EPR spectrum of powder sample consists of two resonance lines. Line 1 with the effective g‐value equal to g₁ = 4.21 ± 0.05 is of the maximum intensity at T = 4.2 K. With temperature increase, the intensity of line 1 decreases until vanishing. Line 2 is observed over the whole temperature range. For T = 300 K, the g‐value of line 2 is g₂ = 2.00 ± 0.09. To study the structure of magnetic ion molecular environment and define nonequivalent positions of the magnetic ion in polyparaphenylene, a calculation was done of the energy of Fe³⁺ magnetic ion for various possible molecular environments. It is shown that in polyparaphenylene for the Fe³⁺ magnetic ion there are two different stationary molecular environments. The obtained model of magnetic ion molecular environment was used to explain the temperature dependence of the EPR spectrum. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

A Highly Selective and Turn‐on Fluorescent Probe for Fe3+ Ion Based on Perylene Tetracarboxylic Diimide

We have demonstrated a turn‐on fluorescent sensor 6 for detection of Fe³⁺ based on photo‐induced electron transfer (PET) mechanism. The probe comprises a perylene tetracarboxylic diimide (PDI) fluorophore and two bis((1,2,3‐triazol‐4‐yl)methyl)amine (DTA) moieties as the metal ion receptors. It exhibits high selectivity toward Fe³⁺ over various other metal ions in CH₃CN/H₂O (1:1, V/V). The binding stoichiometry for 6 ‐Fe³⁺ complexes has been determined to be 1:2 by a Job plot of fluorescence. The association constant between 6 and Fe³⁺ was estimated to be 1.04×10¹⁰ (mol/L)^?2 by Benesi‐Hildebrand equation.     

MnO2 nanozyme induced the chromogenic reactions of ABTS and TMB to visual detection of Fe2+ and Pb2+ ions in water

In this study, we used a simple and rapid colourimetric reaction for visual sensing of Fe²⁺ and Pb²⁺ ions in water by employing nano-MnO₂ as a natural oxidase mimic to respectively catalyse ABTS and TMB in citrate-phosphate buffer solution (C-PBS) at 25°C and pH 3.8. It was found that nano-MnO₂ possessed highly oxidase-mimicking activity with the K_m values of 0.030 and 0.027 toward ABTS and TMB, respectively, indicating TMB had a stronger affinity on nano-MnO₂ than ABTS. Interestingly, the presence of 0.01 mmol·L^?1 Fe²⁺/Pb²⁺ ion was able to significantly down-regulate the activity of MnO₂ nanozyme in nano-MnO₂-mediated ABTS reaction processes (P < 0.01), which mainly due to the strong adsorption of metal ion toward nano-MnO₂ surface via the electrostatic attractions, thus leading to the passivation and inactivation of MnO₂ nanozyme catalytic activity. Thereinto, Fe²⁺ reacted with multivalent manganese by oxidation-reduction, while Pb²⁺ was specifically adsorbed onto the surface of MnO₂ nanozyme and formed complexes. Notably, only Fe²⁺ ion inhibited the activity of MnO₂ nanozyme-TMB with a detection limit as low as 1.0 μmol·L^?1. In MnO₂ nanozyme-ABTS sensing systems, Fe²⁺ and Pb²⁺ ions detection limit of 0.5 and 2.0 μmol·L^?1 were, respectively, achieved with a linear response range of 0–0.02 and 0–0.8 mmol·L^?1, implying the developed MnO₂ nanozyme-ABTS sensor was potentially applicable for the visual determination of Fe²⁺ and Pb²⁺ ions in water. In the real water samples, MnO₂ nanozyme-ABTS achieved high accuracy (relative errors: 3.4?10.5%) and recovery (96?110%) for respective detection of Fe²⁺ and Pb²⁺ ions. The simple and rapid MnO₂ nanozyme-ABTS sensing systems might provide a practical assay for visual detection of Fe²⁺ and Pb²⁺ ions in the environmental water samples.     

苯乙烯三嗪衍生物的合成及在重金属离子识别中的应用

合成了2,4-二(2-噻吩乙烯基)-6-(4'-N,N-二甲氨基苯乙烯基)-1,3,5-均三嗪(2)并鉴定了其结构。在乙腈-水混合介质中,化合物2在355和416nm处呈现双吸收峰,加入Cu²⁺,Hg²⁺ 和Fe³⁺ 后,均在520nm附近形成新的吸收峰。化合物2与Cu²⁺、Hg²⁺ 和Fe³⁺ 均形成1:1型配合物,其结合常数分别为1.9×10⁵L·mol^-1,6.6×10³L·mol^-1,2.7×10³L·mol^-1。对照化合物4与金属离子的光谱响应与化合物2相似,仅吸收峰的位置不同。因此,可认为化合物2和4中三嗪环中的N和噻吩环中的S与Cu²⁺、Hg²⁺ 和Fe³⁺ 共同配位形成了稳定的金属配合物。     

Photocatalytic degradation of methylene blue on Fe3+-doped TiO2 nanoparticles under visible light irradiation

Fe³⁺-doped TiO₂ composite nanoparticles with different doping amounts were successfully synthesized using sol-gel method and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and ultravioletvisible spectroscopy (UV-Vis) diffuse reflectance spectra (DRS). The photocatalytic degradation of methylene blue was used as a model reaction to evaluate the photocatalytic activity of Fe³⁺/TiO₂ nanoparticles under visible light irradiation. The influence of doping amount of Fe³⁺ (ω: 0.00%–3.00%) on photocatalytic activities of TiO₂ was investigated. Results show that the size of Fe³⁺/TiO₂ particles decreases with the increase of the amount of Fe³⁺ and their absorption spectra are broaden and absorption intensities are also increased. Doping Fe³⁺ can control the conversion of TiO₂ from anatase to rutile. The doping amount of Fe³⁺ remarkably affects the activity of the catalyst, and the optimum efficiency occurs at about the doping amount of 0.3%. The appropriate doping of Fe³⁺ can markedly increase the catalytic activity of TiO₂ under visible light irradiation. __________ Translated from Journal of Northwest Normal University (Natural Science), 2006, 42(6): 55–56 [译自: 西北师范大学学报(自然科学版)]     

单取代罗丹明-硫杂杯[4]芳烃衍生物的合成及对Fe~(3+)离子的荧光探针性质研究

以1,3-交替-二羧基甲氧基硫杂杯[4]芳烃为原料,通过与罗丹明乙二胺衍生物的酰化反应得到罗丹明基团单取代的硫杂杯[4]芳烃衍生物。目标化合物结构经IR,NMR,MS及元素分析等技术表征。荧光及可见吸收光谱法研究表明化合物对Fe3+具有探针性质,在乙醇-水(1/1,V/V)Tris-HCl(pH=6.0)缓冲溶液中,对Fe3+呈现光关-开响应,并观察到显著的荧光增强和颜色变红现象。测定了Fe3+-配合物的组成、稳定常数及荧光量子产率。     

Construction of a Stable Lanthanide Metal-Organic Framework as a Luminescent Probe for Rapid Naked-Eye Recognition of Fe3+ and Acetone

Four lanthanide metal-organic frameworks (Ln-MOFs), namely {[Me₂NH₂][LnL]·2H₂O}_n (Ln = Eu 1, Tb 2, Dy 3, Gd 4), have been constructed from a new tetradentate ligand 1-(3,5-dicarboxylatobenzyl)-3,5-pyrazole dicarboxylic acid (H₄L). These isostructural Ln-MOFs, crystallizing in the monoclinic P2₁/c space group, feature a 3D structure with 7.5 Å × 9.8 Å channels along the b axis and the point symbol of {4¹⁰.6¹⁴.8⁴} {4⁵.6}₂. The framework shows high air and hydrolytic stability, which can keep stable after exposed to humid air for 30 days or immersed in water for seven days. Four MOFs with different lanthanide ions (Eu³⁺, Tb³⁺, Dy³⁺, and Gd³⁺) ions exhibit red, green, yellow, and blue emissions, respectively. The Tb-MOF emitting bright green luminescence can selectively and rapidly (<40 s) detect Fe³⁺ in aqueous media via a fluorescence quenching effect. The detection shows excellent anti-inference ability toward many other cations and can be easily recognized by naked eyes. In addition, it can also be utilized as a rapid fluorescent sensor to detect acetone solvent as well as acetone vapor. Similar results of sensing experiments were observed from Eu-MOF. The sensing mechanism are further discussed.     

Photo-Physical Properties of a New Norfloxacin-Containing Polymer for Protons and Fe3+ Sensing

A novel norlfoxacin-containing fluorescent polymer was synthesized via copolymerization of two derivatives of norfloxacin and methylmetacrylate (MMA). It could emit blue fluorescence in both the solution and film states. Fluorescence characteristics of the polymer as a function of pH were investigated in aqueous solution. The polymer solution showed weaker fluorescence between pH 5-9. When the pH of the solution was higher than 9 or lower than 5, stronger fluorescence could be seen. Responses of metal cations (Mn^{2 +}, Fe^{3 +}, Co^{2 +}, Ni^{2 +}, Cu^{2 +} and Zn^{2 +}) to the fluorescence intensity of this polymer were obtained that only Fe^{3 +} could quench efficiently the fluorescence intensity of the polymer in solution and film state. The results suggested the possibility that this newly synthesized compound might work as a polymeric sensor responding to water polluted by protons and Fe^{3 +}.     

An off-on fluorescent sensor with high selectivity and sensitivity for Fe(III)

A new fluorescent derivative (1) containing coumarin exhibits Fe(III)-selective strong yellow-green fluorescence in ethanol. This compound could be used as an “off-on” chemosensor and allow the detection of Fe³⁺ by monitoring changes in absorption and fluorescence spectra. Upon addition of Fe³⁺, an overall emission change of 125-fold was observed. High selectivity and sensitivity were observed over other metal ions, mainly due to the spirolactam ring-opening power of Fe³⁺. The detection limit was as low as 5.6?ppb. Photo-induced electron transfer, coupled with intramolecular charge transfer are proposed to account for the observed spectral response.