Electrical and Structural Properties of Poly (Methyl Methacrylate) Doped Potassium Iodide (KI) Solid Polymer Electrolyte

A high-conducting salt-doped polymer electrolyte layer has been created here for use in photocell technologies. The solution casting method is used to produce ion conducting film where poly (methyl methacrylate) (PMMA) is used as the host polymer and potassium iodide (KI) as the dopant. The conductivity and amorphic increases of the polymer electrolytes with the addition of salt concentrations helps in the enhancement of the charge transfer properties. Using electrochemical impedance spectroscopy (EIS), ionic conductivity is evaluated where maximum conductivity is 3.99 × 10⁻⁶ S cm^-1 at 20 wt% KI concentration. Polarized optical microscopy (POM) shows the reduction in crystallinity by salt doping, while Fourier transforms infrared spectroscopy (FTIR) shows the complexation as well as composite nature of the film. Ionic transference number (t_ion) measurement shows the predominantly ionic nature of this polymer electrolyte.     

Preparation of Latexes with Poly(Methyl Methacrylate) Cores and Hydrophilic Polymer Shells Containing Amino Groups

Abstract

Functional latexes with poly(methyl methacrylate) (PMMA) cores and amino‐containing, water‐soluble polymer shells were synthesized via direct graft copolymerization of methyl methacrylate from water‐soluble polymers induced by a small amount of tert‐butyl hydroperoxide (TBHP) at 80°C for 2 h. Amphiphilic graft copolymers and PMMA homopolymers were generated concurrently to form highly monodispersed latexes. The effects of water‐soluble polymer containing different amino group, reaction temperature, TBHP concentration, molecular weight of the polymer and pH of the solution on conversion and grafting efficiency of the monomer and particle size were investigated. Transmission electron microscopic images of the PMMA/poly(ethyleneimine) (PEI) and PMMA/poly(allylamine) (PAA) particles clearly show well‐defined core‐shell morphologies, where PMMA cores are coated with either PEI or PAA shell. The amino‐containing polymer shells were also confirmed with zeta‐potential measurements. Furthermore, the amino‐containing latexes can be produced with a solids content up to 22 wt.%. Thus, this method provides a commercially viable route to functional latexes.     

Converting Poly(Methyl Methacrylate) into a Triple-Responsive Polymer

Multiresponsive polymers that can respond to several external stimuli are promising materials for a manifold of applications. Herein, a facile method for the synthesis of triple-responsive (pH, temperature, CO₂) poly(N,N-diethylaminoethyl methacrylamide) by a post-polymerization amidation of poly(methyl methacrylate) (PMMA) is presented. Combined with trivalent counterions ([Fe(CN)₆]³⁻) both an upper and lower critical solution temperature (UCST/LCST)-type phase behavior can be realized at pH 8 and 9. PMMA and PMMA-based block copolymers are readily accessible by living anionic and controlled radical polymerization techniques, which opens access to various responsive polymer architectures based on the developed functionalization method. This method can also be applied on melt-processed bulk PMMA samples to introduce functional, responsive moieties at the PMMA surface.     

Enhanced ionic conductivity in PEO/PMMA glassy miscible blends: Role of nano‐confinement of minority component chains

AC impedance spectroscopy was used to investigate the ionic conductivity of solution cast poly(ethylene oxide) (PEO)/poly(methyl methacrylate) (PMMA) blends doped with lithium perchlorate. At low PEO contents (below overlap weight fraction w^*), ionic conductivities are almost low. This could be due to nearly distant PEO chains in blend, which means ion transportation cannot be performed adequately. However, at weight fractions well above w^*, a significant increase in ionic conductivity was observed. This enhanced ionic conductivity mimics the PEO segmental relaxation in rigid PMMA matrix, which can be attributed to the accelerated motions of confined PEO chains in PMMA matrix. At PEO content higher than 20 wt % the conductivity measured at room temperature drops due to crystallization of PEO. However by increasing temperature to temperatures well above the melting point of PEO, a sudden increase of conductivity was observed which was attributed to phase transition from crystalline to amorphous state. The results indicate that some PEO/PMMA blends with well enough PEO content, which are structurally solid, can be considered as an interesting candidate for usage as solid‐state electrolytes in Lithium batteries. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 2065–2071, 2010     

Vitamin C Functionalized Poly(Methyl Methacrylate) for Free Radical Scavenging

Abstract

In the present work, a strategy was developed to use mild and highly selective enzymatic methods to covalently couple the primary hydroxyl group of vitamin C with methyl methacrylate monomer, followed by a second enzymatic reaction catalyzed by horseradish peroxidase to polymerize the vinyl monomer yielding a vitamin C functionalized poly(methyl methacrylate) (PMMA). Vitamin C, L‐ascorbyl methylmethacrylate and PMMA, when used at concentrations up to 133 µM, fully scavenged 2,2‐diphenyl‐1‐picryl hydrazyl free radicals (0.2 mM). Thus, the formation of vinyl polymers with active pendent antioxidant compounds, in this case vitamin C, retained an ability to scavenge radicals while in polymeric form. The functionalized antioxidant on a PMMA backbone has implications for consumer‐related applications like foods, pharmaceuticals, and personal care products.     

Anionic Conduction in Blends of Poly(Pyridinium Ethyl Methacrylate Perchloride) and Poly[Oligo(Oxyethylene) Methacrylate-Co-Acrylamide]

Abstract

Blends of poly(pyridinium ethyl methacrylate perchloride) and poly[oligo(oxyethylene) methacrylate-co-acrylamide] were prepared, and the ionic conductivity and mobility of the blends were investigated. Results indicate that both the transference of perchlorate anion and the dissociation of the polymeric salt in the comblike polyether obey the thermoactivation mechanism, and that the perchlorate anion in the blends is free.     

Thermal Decomposition and Glass Transition Temperature of Poly(methyl Methacrylate) and Poly(isobutyl Methacrylate)

Abstract

The thermal decomposition and the glass transition temperatures of poly(methyl methacrylate) (PMMA) and poly(isobutyl methacrylate) (PiBuMA) were studied with a differential scanning calorimeter (DSC). The undecomposed and decomposed polymers were analyzed by gel permeation chromatography (GPC) for molecular weight distributions and by DSC for changes in the thermal properties and glass transition temperatures, T. In the isothermal decomposition of PMMA and PiBuMA, depolymerization reactions exclusively are operative. During low temperature decompositions, longer PMMA chains depolymerize first. These are followed by the shorter chains. In the case of PiBuMA, the shorter chains depolymerize first. Some of these undergo chain recombinations to yield very high molecular weight products. For identical values of weight loss, the respective decomposition temperatures for PiBuMA are 40 to 70 K lower than those for PMMA. The activation energies of decomposition (42 kJ/mol for PMMA and 67 kJ/mol for PiBuMA) have been found to be lower than those reported in the literature. Although T_g∞ of PiBuMA (331 K) agrees well with the literature value (326 K), T_g∞ of atactic PMMA (394 K) is higher than the reported value (378 K).     

Studies on Poly(Methyl Methacrylate) (PMMA) and Thermoplastic Polyurethane (TPU) Blends

Blends of poly(methyl methacrylate) (PMMA) and thermoplastic polyurethane (TPU) in different compositions viz., 95/5, 90/10, 85/15 and 80/20 (by wt/wt, % of PMMA/TPU) were blended by melt mixing using a twin‐screw extruder. All the PMMA/TPU blends have been characterized for physico‐mechanical properties such as density, melt flow index, tensile behavior and izod impact strength. The impact strength of the PMMA/TPU blends were found to increase significantly with an increase in the percentage of TPU up to 20%, by retaining the tensile strength of PMMA. The effect of chemical aging on the performance of blends has been studied.     

Thermal Decomposition and Glass Transition Temperature of Poly(phenyl Methacrylate) and Poly(cyclohexyl Methacrylate)

The thermal decomposition and the glass transition temperature T_g of poly(phenyl methacrylate) (PPhMA) and poly(cyclohexyl methacrylate) (PcHU) were studied with a differential scanning calorimeter (DSC). The undecomposed and decomposed polymers were analyzed by gel permeation chromatography (GPC) for molecular weight distributions and by DSC for changes in the thermal properties, e.g., T_g. For all values of weight-loss α, the thermal stability of the polymers follows the order: Poly-(methyl methacrylate) (PMMA) = PcHMA > poly(ethyl methacrylate) (PEMA) > PPhMA > poly(n-butyl methacrylate) (PnBuMA) > poly(isobutyl methacrylate) (PiBuMA). In the depolymerization reactions that occur during the isothermal decomposition of PPhMA, there is no specific preference for longer or shorter chains although a minor fraction of the volatilized fraction with an [Mbar]_w 10^?5 of 2.5 and an [Mbar] _n |MX 10.^?5 of 1.5 does undergo chain recombination yielding high molecular weight products with an M_w × 10^?6 of 1.35 and an M_n × 10^?6 of 1.0 to 1.23. In the case of PcHMA, depolymerizations did show a preference for longer chains. No chain recombination, however, was found to take place. Activation energy of decomposition for substituted poly-methacrylates follows the order: PnBuMA = PiBuMA >; PEMA >; PcHMA >; PMMA >; PPhMA. T_{g e} values of PPhMA samples varied from 362 K for undecomposed polymers to 396 K for a polymer treated at 300° C. The literature value of 383 K does fall within this range. In the case of PcHMA, an average T_ge of 356 f 6.0 ± is not far removed from the reported value of 359 K.     

Graft Copolymerization of Methyl Methacrylate onto Poly(Ethylene Terephthalate) Fibers Using Benzoyl Peroxide

Abstract

The graft copolymerization of methyl methacrylate onto poly(ethylene terephthalate) fibers has been studied using benzoyl peroxide as initiator. The grafting reactions were carried out within the 70 to 90°C temperature range, and the variations of graft yield with monomer and initiator concentrations were also investigated. The overall activation energy for grafting was calculated as 34.1 kcal/mol. The results of dyeability with the disperse dye suggested that diffusion into the fiber structure was moderately difficult when the graft yield reached 14?15%. The maximum graft yield was obtained at a benzoyl peroxide concentration of 4.00 × 10^?3 M. The decomposition temperature values obtained from thermogravimetric analysis show that the thermal stability of poly(ethylene terephthalate) fibers decreased as a result of grafting. Further, such change in the properties of methyl methacrylate grafted fibers as density, diameter, and moisture regain were also determined.     

Effect of the Poly(Methyl Methacrylate) Molecular Weight on the Mechanical Properties BisGMA/TEGDMA Semi-interpenetrating Polymer Networks

Abstract

The effect of poly(methyl methacrylate) [PMMA], with different molecular weights on the mechanical properties of a polymerized BisGMA/TEGDMA base monomer resin was investigated. With the aid of acetone solvent, PMMA could be readily dissolved in BisGMA/TEGDMA mixtures. The addition of PMMA can significantly improve the compressive strengths and decrease the Knoop hardness values of the BisGMA/TEGDMA/PMMA semi-IPNs. The thermal expansion coefficients rapidly increased before T_g, and decreased after T _g. The observed properties could be attributed to the effect of the molecular weight of the PMMA on the phase structures of the semi-IPNs.     

Ion conductivity studies of blends of poly(methyl methacrylate)-g-poly(ethylene glycol) and poly(ethylene glycol) complexed with LiCF3 SO3

Polymer electrolytes which are adhesive, transparent, and stable to atmospheric moisture have been prepared by blending poly(methyl methacrylate)-g-poly(ethylene glycol) with poly(ethylene glycol)/LiCF₃ SO₃ complexes. The maximum ionic conductivities at room temperature were measured to be in the range of 10⁻⁴ to 10⁻⁵ s cm⁻¹. The clarity of the sample was improved as the graft degree increased for all the samples studied. The graft degree of poly(methyl methacrylate)-g-poly(ethylene glycol) was found to be important for the compatibility between the poly(methyl methacrylate) segments in poly(methyl methacrylate)-g-poly(ethylene glycol) and the added poly(ethylene glycol), and consequently, for the ion conductivity of the polymer electrolyte. These properties make them promising candidates for polymer electrolytes in electrochromic devices. © 1996 John Wiley & Sons, Inc.     

Investigations on poly(methyl methacrylate)-poly(ethylene oxide) hybrid polymer electrolytes with dioctyl phthalate, dimethyl phthalate and diethyl phthalate as plasticizers

Plasticizers can be used to change the mechanical and electrical properties of polymer electrolytes by reducing the degree of crystallinity and lowering the glass transition temperature. The transport properties of gel-type ionic conducting membranes consisting of poly(ethylene oxide) (PEO), poly(methyl methacrylate) (PMMA), LiClO₄ and dioctyl phthalate, diethyl phthalate or dimethyl phthalate (DMP) are studied. The polymer films are characterized by X-ray diffraction, Fourier transform infrared and impedance spectroscopic studies. It is found that the addition of DMP as the plasticizer in the PEO-PMMA-LiClO₄ polymer complex favours an enhancement in ionic conductivity. The maximum conductivity value obtained for the solid polymer electrolyte film at 305 K is 3.529×10^{– 4} S cm^–1. Electronic Publication     

Ionic conductivity and compatibility studies of blends of poly(methyl methacrylate) and poly(propylene glycol) complexed with LICF3SO3

Stable to atmospheric moisture, adhesive and transparent polymer electrolytes have been prepared by blending poly(methyl methacrylate) (PMMA) with poly(propylene glycol)-425/LiCF₃SO₃ complexes. The blending of the polymers has been achieved by a method developed in our laboratory: free radical polymerization of methylmethacrylate in the polyether/salt matrix. A series of polymer blend complexes varying in PMMA content (up to 20% by weight) and oxygen/metal ratios (25, 16, and 8) have been synthesized and their properties studied. All the samples prepared in this study were found to be optically clear unlike the higher molecular weight poly(propylene glycol)-2000 (PPG-2000) system which required a minimum salt concentration to compatibilize a specific amount of PMMA with PPG. The mechanisms by which the salt holds the otherwise incompatible polymers together in a single phase have been investigated by FT-IR. Our studies show a weak coupling of the ether oxygens in the PPG with the ester groups of the PMMA through the lithium cations. Discrete changes has been observed in the FT-IR spectrum of PMMA when doped with the lithium salt hitherto unnoticed with other dopants. Gel permeation chromatography results of the PMMA samples isolated from the solid electrolytes indicate the molecular weight to vary between 43000 and 121000 with relatively narrow distributions, 1.6?2.0. The ionic conductivities of the polymer blend electrolytes were fairly high (10^?5 S/cm) at room temperature. The PMMA neither significantly influenced the T_g of the blend complexes nor effected the ionic conductivities drastically. The ionic conductivity as a function of temperature followed the empirical Vogel-Tammann-Fulcher equation. The blending of PMMA with PPG/LiCF₃SO₃ complexes was found to impart good adhesiveness to the solid electrolytes while making them stable to atmospheric moisture. © 1992 John Wiley & Sons, Inc.     

Grafting of Poly(Methyl Methacrylate) onto Poly(Vinyl Chloride) through Benzodithioate Groups

The synthesis and the characterization of poly (methyl methacrylate) (PMMA) grafted to poly(vinyl chloride) (PVC) through benzodithioate groups are studied. Unlike results generally obtained with conventional free-radical initiators for systems involving PVC and MMA, high conversions, and grafting efficiencies are achieved with azobis-isobutyronitrile. The paper describes the synthesis of p-vinylbenzodithioate-containing PVC and the dependence of the characteristics of PVC-g-PMMA on the composition of the reaction mixture. Characterization of the graft copolymers includes UV and IR spectroscopy, GPC, and microstructure analysis by removal of PMMA side chains by aminolysis of dithioesters groups. Intrinsic viscosity, glass transition temperature, and thermal sensitivity were investigated to confirm the grafted nature of the copolymer.     

Polymer gel electrolytes based on oligomeric polyether/cross-linked PMMA blends prepared via in situ polymerization

Very-low-vapor-pressure oligomeric polyether electrolytes blended with and dimensionally stabilized by cross-linked poly(methyl methacrylate) (PMMA) are prepared via in situ polymerization. The synthesized polymer gel electrolytes (PGEs) are freestanding films with excellent dimensional stability, mechanical integrity and strength. They exhibit high ionic conductivity at room temperature reaching 4.3 × 10⁻⁴ S/cm for the highest conducting sample and exceptional thermal stability. The oligomeric polyether and PMMA appear to have molecular level interaction in the blends and the PGEs remain a single phase from at least −50 to 200 °C, potentially enabling their application in advanced batteries in wide temperature ranges. The novel in situ polymerization process allows precise control of the composition of the PGEs and can enable in situ fabrication of advanced cells.     

Benzyl Bromide Functionalized Poly(Phenyleneethynylene)s as Macroinitiators in the Atom Transfer Radical Polymerization of Methyl Methacrylate

Abstract

The behavior of benzyl bromide functionalized poly(phenyleneethynylene)s as macroinitiators in the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) was investigated. The ¹H NMR observation of the ATRP using the exclusively para‐linked poly(phenyleneethynylene) macroinitiator PPE1A, and the low molecular weight initiator R‐BzBr, respectively, revealed lower reactivity for the macroinitiator. Comparison of graft copolymers, which were obtained from ATRP of MMA with PPE1A and the partially meta‐linked poly(phenyleneethynylene) PPE1B, showed higher reactivity in the case of PPE1B, expressed by a larger degree of polymerization in the PMMA side chains, as well as higher initiatior efficiency. This might be caused by better solubility of the less symmetric PPE1B. Investigation of the graft copolymers PPE2A and PPE2B was carried out by means of ¹H NMR spectroscopy, gel permeation chromatography (GPC) as well as UV/vis spectroscopy. Impairment of the delocalized π‐electron system of the conjugated polymers during the ATRP was not detectable.     

A Gel Polymer Electrolyte with 2D Filler-reinforced for Dendrite Suppression Li-Ion Batteries

Gel polymer electrolytes (GPEs) incorporate both the high ionic conductivity of organic liquid electrolyte and the high safety performance of all-solid-state electrolytes (ASSEs), greatly improving the electrochemical performance of solid polymer electrolytes (SPEs). However, the practical application of GPEs is still limited by inferior interface compatibility, lithium dendrites, etc. Herein, we prepared GPEs based on poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) further co-blended the two-dimensional sheet inorganic filler hectorite and poly(methyl methacrylate) (PMMA) to improve the mechanical and electrochemical properties of the GPEs. When the content of PMMA and hectorite is optimal, this GPEs have an ionic conductivity of 1.06×10⁻³ S cm⁻¹ and outstanding lithium symmetric cells cycle time of more than 3000 h, indicating that the introduction of filler effectively inhibits the growth of lithium dendrites at room temperature. Moreover, the GPEs adopt a relatively simple solution casting method to provide a fresh idea for the synthesis of high-performance GPEs.     

Ion transport and relaxation in phosphonium poly(ionic liquid) homo- and co-polymers

In the present work, a poly(ionic liquid) (PIL), poly(triphenyl-4-vinylbenzylphosphonium chloride) and a series of its random copolymers with nonionic hydrophobic poly(methyl methacrylate) (PMMA) are synthesized by conventional free radical polymerization (CFRP) and reversible addition-fragmentation chain-transfer (RAFT) polymerization. The understanding of some fundamental aspects about ion transport and relaxation mechanism in PIL and PIL copolymers are investigated using dielectric spectroscopy via several theoretical models. The influence of copolymer compositions, physical blending of neat PIL and PMMA, size of counter anions (Cl⁻ and TFSI⁻) and variation of molecular weights on thermal stability, moisture sensitivity, ionic transport and relaxation properties are also studied. An enhancement of thermal stability and ionic transport property of the PIL copolymer is observed compared to those of the physically mixed blend of two homopolymers with same compositions. The incorporation of hydrophobic PMMA segment definitely decreases the moisture content in PIL copolymers than the PIL itself. In all these PIL- based systems, the temperature dependence of ionic conductivity, relaxation time and ion diffusivity are well described by Vogel-Tammann-Fulcher model. The studies of some fundamental properties of these new PIL copolymers with less moisture sensitivity may help in using them as potential polymer electrolytes in energy storage devices.     

Poly(Methyl Methacrylate) Coatings Containing Flame Retardant Additives from Suspensions in Water-2-Propanol

A dip-coating technique is designed for deposition of poly(methyl methacrylate) (PMMA) from water/2-propanol mixture, avoiding the use of traditional toxic solvents. Solutions of PMMA macromolecules with high molecular weight (M_W) are obtained for a water/2-propanol ratio of 0.15–0.33 and the solubilization mechanism is discussed. The ability to use concentrated PMMA solutions and high M_W of the polymer are the key factors for the successful dip coating deposition. The coating mass for 10 g L⁻¹ polymer solutions shows a maximum at a water/2-propanol ratio of 0.25. The deposition yield increases with the polymer concentration increase and with an increasing number of the deposited layers. PMMA deposits protect stainless steel from aqueous corrosion. The coating technique allows for the fabrication of composite coatings, containing flame-retardant materials (FRMs), such as commercial halloysite, huntite, hydrotalcite, and synthesized Al(OH)₃, in the PMMA matrix. The FRM content in the coatings is modified by variation of the FRM content in colloidal suspensions. A fundamentally new method is developed, which is based on the salting out aided dispersive extraction of Al(OH)₃ from the aqueous synthesis medium to 2-propanol. It is based on the use of hexadecylphosphonic acid molecules as extractors. The method offers advantages of reduced agglomeration.