Preparation and Crystal Structure of the Sodium Iodide Complex of 5,11,17,23-tetra(tert-butyl)-25,27-di(ethoxymethoxy)-26,28-(diethylacetamido) Calix[4]arene in the Cone Conformation

The direct preparation of the sodium complex of 5,11,17,23-tetra(tert-butyl)-25,27-di(ethoxymethoxy)-26,28-(diethylacetamido) calix[4]arene 1.NaI is reported. The crystal structure of 1.NaI shows the calix unit to be in a cone conformation with the sodium located in the cavity delineated by the oxygen atoms.     

Synthesis of Flavin–Calix[4]arene Conjugate Derivatives

The synthesis of two new flavin substituted calix[4]arene derivatives, 9 and 10 , is described. The first flavin substituted calix[4]arene derivative 9 was synthesized by the reaction of 3‐methylalloxazine ( 5 ) with 25,27‐bis(3‐bromopropoxy)‐26,28‐dihydroxy‐5,11,17,23‐tetra(tert‐butyl)calix[4]arene ( 4 ) in high yield (92%). The other derivative 10 was prepared from 3‐methylalloxazine‐1‐acetic acid ( 7 ) and 25,27‐bis(3‐cyanopropoxy)calix[4]arene ( 3 ). All new compounds were characterized by a combination of FT‐IR and ¹H‐NMR spectroscopy, and elemental‐analysis techniques.     

Synthesis of novel p-tert-butyl-calix[4]arene derivatives and their cation binding ability: chromogenic effect upon side arms binding

A series of novel double-armed calix[4]arene derivatives, i.e. 5,11,17,23-tetra-tert-butyl -25,27-bis[2-[(2-hydroxy-5-(4-nitroazo)benzylidene)amino]ethoxy]-26,28-dihydroxy-calix[4]-arene (4), 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[(2-hydroxy-5-(2-nitroazo)benzylidene) amino]ethoxy]-26,28-dihydroxycalix[4]arene (5), 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[(2-hydroxy-5-(4-chloroazo)benzylidene)amino]ethoxy]-26,28-dihydroxycalix[4]arene (6), have been synthesized as an selective chromoionophore for Na⁺. The complexation behavior of ligands 4-6 with alkali metal ions Na⁺, K⁺, Rb⁺and Cs⁺ has been evaluated by using UV-Vis spectrometry in CH₃CN-H₂O (99:1/V:V) solution at 25°C. The UV-Vis spectra show that the complexation of 4-6 with Na⁺exhibits obvious bathochromic shifts (λ_max 379→480 nm) and there is a unique color change in the solution from yellow to red upon complexation. The binding constants for Na⁺ are higher than that of other alkali metal ions, giving the highest cation selectivity up to 7 for Na⁺/K⁺. The binding ability and photophysical behavior of alkali cations by calix[4]arene derivatives 4-6 are discussed from the point of view of substituted effects at the lower rim of parent calix[4]arene and size-fit concept between host calix[4]arenes and guest cations.     

Determination of the ammonium ion by voltammetry at the liquid-liquid interface using calixarenes as neutral carriers

The transfer of alkali and alkaline earth metal ions and ammonium ions facilitated by the calixarenes 5,11,17,23-tetra(tert-butyl)-26,28-dihydroxycalix[4]-25,27-crown-5-ether, 5,11,17,23-tetra(tert-butyl)-26,28-di(ethoxycarbonylmethoxy)calix[4]-25,27-crown-5-ether, and 5,11,17,23-tetra(tert-butyl)-25,26,27,28-tetra(ethoxycarbonylmethoxy)-calix[4]arene was studied by voltammetry at the interface between two immiscible electrolyte solutions. The formal energies, transfer potentials, stoichiometry, and stability constants of the complexes were determined. The optimum conditions for determining the ammonium ion by voltammetry at the liquid-liquid interface were selected on the basis of these studies (the detection limit was 3.5 × 10^?6 M). The ammonium ion determination showed selectivity relative to the sodium ion.     

Alkali Metal Complexation. Binding Properties of cone and partial-cone Calix[4]arenes Bearing a Mixed (O 2 , O 2 ') Donor Set (O = Phosphine Oxide; O ' = Amide or Ester)

The stability constants of alkali metal complexes obtained from the followingO-substituted calix[4]arenes were determined by UV/Vis spectroscopy inmethanol at 20°C: 5,11,17,23-tetra-tert-butyl-25,27-bis(diethylcarbamoylmethoxy)-26,28-bis(diphenylphosphinoylmethoxy)calix[4]arene(cone-1), 25,27-syn-26,28-anti-5,11,17,23-tetra-tert-butyl-25,27-bis(diethylcarbamoylmethoxy)-26,28-bis(diphenylphosphinoylmethoxy)calix[4]arene (paco-1),5,11,17,23-tetra-tert-butyl-25,27-diethoxycarbonylmethoxy-26,28-bis(diphenylphosphinoylmethoxy)calix[4]arene(cone-2) and25,27-syn-26,28-anti-5,11,17,23-tetra-tert-butyl-25,27-diethoxycarbonylmethoxy-26,28-bis(diphenylphosphinoylmethoxy)calix[4]arene(paco-2). All ligands form 1:1 complexes with alkali metal cations. The amide-containing calixarenes were found to be more efficient for alkali metalcomplexation than those bearing ester substituents. While sodium ions are selectivelycomplexed by the two mixed amide-(phosphine oxide) calixarenes, the twoester-containing isomers cone-2 and paco-2 turned out to be selective towards potassium and rubidium ions, respectively. With allfour ligands the lowest stability constants were found for the lithium andcesium ions.     

Novel Triphenylamine Appended 1,3-Alternate-Calix[4]arenes: Synthesis and Characterization

In the present study, two novel calix[4]arene receptors containing triphenylamine units in 1,3-alternate conformation have been synthesized and characterized in detail. First, the 25,27-dipropoxy-26,28-bis[(3-aminopropyl)oxy]-calix[4]arene 4 and 25,26,27,28-tetra[(3-aminopropyl)oxy]-calix[4]arene 7 were prepared by using convenient reagents. Then, these amino derivatives of calix[4]arene were converted to Schiff base derivatives appended to triphenylamine of calix[4]arene (5 and 8) using 4-formyltriphenylamine via condensation. The 1,3-alternate conformation of the synthesized calix[4]arenes was determined by ¹H and ¹³C NMR analyses. Also, their structures have been characterized by using ¹H and ¹³C NMR, infrared, and elemental analyses.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communications® to view the free supplemental file.     

含氮手性杯[4]芳烃对羧酸的手性识别

Chiral nitrogen-containing calix[4]arene was easily synthesized by the reaction of 25,27-di（2-bromoethoxy）- 26,28-dihydroxy-5,11,17,23-tetrakis（t-butyl）calix[4]arene with S-（-）-1-phenylethylamine in excellent yield, and showed good ability to recognize the enantiomers of mandelic acid and 2,3-dibenzoyltartaric acid. This finding has potential application to assay and separation of enantiomers of the carboxylic acids.     

Synthesis of Calix[4]arene Derivatives Containing a Nucleobase and their Interaction with Complementary Nucleosides at the Air–Water Interface

Amphiphilic calix[4]arene derivatives with a nucleobase on the lower rim have been synthesized in good yields by the condensation of calix[4]arenediamine {5,11,17,23-tetra-tert-butyl-25,27-bis(2-aminoethoxy)-26,28-dihydroxycalix[4]arene} with uracilo-N-acetic acid, thymino-N-acetic acid and adenino-N-propionic acid in the presence of CDI in DMF. Monolayers of the amphiphilic calix[4]arene-nucleobase derivatives on the surface of pure water, the aqueous subphases containing complementary nucleosides, were studied by film balance measurement and relaxation experiments. LB films deposited from all subphases were investigated by UV spectra and FT-IR spectroscopy. All the results indicate that the interaction between the nucleobases in the headgroup of amphiphilic p-tert-butylcalix[4]arene derivatives and the complementary nucleosides in the subphase takes place through multiple hydrogen bonding and the nucleosides can be transferred to solid substrates along with their monolayers.     

Synthesis of a Naphthalimide Functionalized Calix[4]arene; A Host Type Fluorophore for Inclusion Compounds in Organic Medium

This article reports the synthesis and the properties of 5,11,17,23-tetra(t-butyl)-25,27-bis-(ethoxy-1,8-naphthalimide)-26,28-hidroxy-calix[4]arene and the formation of an inclusion compound in organic medium. This functionalized calix[4]arene was conceived as the association of a potential host species with a good fluorophore for optical sensoring purposes. Calix[4]-NI as we will call it, maintains its ‘cone-pinched’ configuration and exhibits typical naphthalimide fluorescence bands in non-polar solvents. Its ability to interact with guest species via hydrogen bonding in its endo-hydrophilic cavity to form inclusion compounds was verified with absorption and fluorescence measurements using N-ethanol-1,8-naphthalimide as guest species, which was projected to fit exactly the host cavity and to interact with its naphthalimide π electrons. For this reason, it was possible to follow the formation of the inclusion compound with electronic spectroscopy.     

Influences of Hard Donor on Cation Selectivities Closing to Soft Selenium Donor in Tweezer-like Calix[4]arene Receptors

Three novel 25,27-dihydroxy-26,28-bis(3-benzylselenopropoxy)-5,11,17,23-tetra-tert-butylcalix[4]-arene (2),25,27-dihydroxy-26,28-bis[3-(2-hydroxyethylseleno)propoxy]-5,11,17,23-tetra-tert-butyl-calix[4]arene (3) and 25,27-dihydroxy-26,28-bis(3-propylselenoproppxy)-5,11,17,23-tetra-tert-butyl-calix[4]arene (4) were synthesized for the comparison of their ion-selectivity in ion-selective electrodes (ISE). X-ray structure of the CH/π complex of 4.CH2Cl2 was elucidated. ISEs based on 2-4 as neutral ionophores were prepared, and their selectivity coefficients for Ag (logKAg,M^pot) were investigated against some main group metal ions and transition metal ones using the fixed interference method (FIM). These ISEs showed excellent Ag^ selectivity over most of the interfering cations examined. It is evident that the stronger Hg^2 interference may not be produced while hard donors (hydroxy) are close to the soft selenium donors.     

一对含有苯甲醛基修饰的杯芳烃异构体的晶体结构以及它们与铽离子配位的光物理性质

Two calix[4]arene isomers with benzaldehyde moieties, i.e., 5,11,17,23-tetra-tert-butyl-25,27-bis[2-(o-formyl-phenoxy)ethoxy]-26,28-dihydroxycalix[4]arene (3) and 5,11,17,23-tetra-tert-butyl-25,27-bis[2-(p-formylphenoxy)-ethoxy]-26,28-dihydroxycalix[4]arene (4), were synthesized according to a newly designed route in high yields, and their crystal structures have been determined by X-ray crystallographic study. The photophysical behavior on complexation of calix[4]arene derivatives 3 and 4 with terbium(Ⅲ) nitrate was investigated in anhydrous acetonitrile at 25℃ by UV-Vis and fluorescence spectroscopies. The crystallographic structure of 3 indicated that the eight oxygen atoms formed a preorganized ionophoric cavity due to intramolecular π-π stacking, which could encapsulate lanthanide ions tightly. In sharp contrast, the compound 4 formed a linear array by intermolecular π-π stacking, hence the oxygen atoms of pendant arms could not coordinate with metal ions, giving a poor binding ability to Tb^3 . The absorption spectra of 3 with Tb^3 showed clearly a new broad intense absorption at 385nm. Interestingly, the narrow emission line spectrum has also been observed for compound 3 with Tb^3 , and the results obtained were discussed from the viewpoint of energy transfer mechanism between host structures and the properties of lanthanide ions.     

Synthesis of a Naphthalimide Functionalized Calix[4]arene; A Host Type Fluorophore for Inclusion Compounds in Organic Medium

This article reports the synthesis and the properties of 5,11,17,23-tetra(t-butyl)-25,27-bis-(ethoxy-1,8-naphthalimide)-26,28-hidroxy-calix[4]arene and the formation of an inclusion compound in organic medium. This functionalized calix[4]arene was conceived as the association of a potential host species with a good fluorophore for optical sensoring purposes. Calix[4]-NI as we will call it, maintains its ‘cone-pinched’ configuration and exhibits typical naphthalimide fluorescence bands in non-polar solvents. Its ability to interact with guest species via hydrogen bonding in its endo-hydrophilic cavity to form inclusion compounds was verified with absorption and fluorescence measurements using N-ethanol-1,8-naphthalimide as guest species, which was projected to fit exactly the host cavity and to interact with its naphthalimide π electrons. For this reason, it was possible to follow the formation of the inclusion compound with electronic spectroscopy.in final form: 17 November 2004.This revised version was published online in July 2005 with a corrected issue number.     

Synthesis of a tweezer-like bis(arylthiaalkoxy)calix[4]arene as a cation sensor for ion-selective electrodes: an investigation of the influence of neighboring halogen atoms on cation selectivity

Two novel tweezer-like 25,27-dihydroxy-26,28-bis(phenylthiaethoxy)calix[4]arenes 6 and 7 were synthesized by the reaction of 25,27-dihydroxy-26,28-bis(bromoethoxy)calix[4]arenes 3 and 4 for the evaluation of their ion-selectivity in ion-selective electrodes (ISEs). X-ray structural analysis indicated that calix[4]arene 7 is in an interesting infinite linear aggregate via self-inclusion. For investigation of the influences of substitutes on the behavior of the ISEs, the halogen substituted aryl analogues of 25,27-dihydroxy-26,28-bis(arylthiaethoxy)calix[4]arenes 8-12 were also synthesized and their ISE performances were evaluated under the same conditions. ISEs based on 6-12 as neutral ionophores were prepared, and their selectivity coefficients for Ag+ (log KAg,M(pot)) were investigated against other alkali metal, alkaline-earth metal, lead, ammonium ions and some transition metal ions using the fixed interference method (FIM). These ISEs showed excellent Ag+ selectivity over most of the interfering cations examined, except for Hg2+ having relative smaller interference (log KAg,Hg(pot) < or = 2.1). The 19F NMR spectra of 9 and 9.AgClO4 were recorded for investigation the fluorine environments in the complex. The 19F NMR spectra strongly suggested that the fluorine atoms on ionophore 9 participated in ligation with silver cation.     

Preparation and chromatographic characteristics of calix[4]arene polysiloxane as stationary phases for capillary gas chromatography

Summary Two new kinds of calix[4]arene derivatives, 5, 11, 17, 23-tetra-tert-butyl-25,27-bis(isopropylcarbamoyl-methoxy)-26,28-diundecenyloxy calix[4]arene (C[4]A) and 25,27-dibutoxy-5, 11, 17, 23-tetra-tert-butyl-26,28-diundecenyloxy calix[4]arene (C[4]B0, are prepared and then are polymized by two different processes. Three calix[4]arene polysiloxane stationary phases for capillary gas chromatography are obtained. Their chromatographic characteristics, including column efficiency, polarity, selectivity, glass-transition temperature and thermal stability are studied. Retention mechanisms are also discussed.     

Potentiometric evaluation of calix[4]arene anion receptors in membrane electrodes: phosphate detection

Ion-selective membrane electrodes doped with the urea- or thiourea-functionalised calix[4]arenes, 5,11,17,23-tetra-tert-butyl-25,27-bis[[4-N′-(phenylureido)butyl]oxy]-26,28-dipropoxy calix[4]arene (I) and 5,11,17,23-tetra-tert-butyl-25,27-bis[[4-(N′-phenylthioureido)-butyl]oxy]-26,28-dipropoxy calix[4]arene (II), were evaluated for anion sensing. Potentiometric results show that these calixarene ionophore-based membrane electrodes exhibit a good sensitivity to aqueous solutions of the monohydrogen orthophosphate species HPO₄²⁻ in the concentration range 5.0 × 10⁻⁵ to 1.0 × 10⁻¹ M, with near-Nernstian response slopes of −33.0 and −28.0 mV dec⁻¹ for ionophores I and II, respectively. Selectivity coefficient values for monohydrogen orthophosphate over a range of common anions were determined by the fixed interference and matched potential methods and indicated that these membrane electrodes exhibit a good selectivity for HPO₄²⁻ with respect to the other anions, including sulfate and nitrate.     

Synthesis and Rh(I)‐catalyzed polymerization of 1,3‐diphenylyne–calix[4]arene compounds: Novel conjugated,calixarene‐based polymers

The synthesis of two 1,3‐bis(4‐ethynylbenzyloxy)calix[4]arenes, 5,11,17,23‐tetrakis(1,1‐dimethylethyl)‐25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene ( 1 ) and 25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene ( 2 ), was accomplished through Sonogashira coupling of appropriate calixarene derivatives. Methods for the polymerization of these bifunctional building blocks with Rh(I) as a catalyst, leading ultimately to conjugated polymers having calix[4]arene units incorporated into the main chain, were explored. Calixarenes 1 and 2 were efficiently polymerized with rhodium‐based initiators and afforded the conjugated polymers poly{5,11,17,23‐tetrakis(1,1‐dimethylethyl)‐25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene} ( poly 1 ) and poly{25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene}. Depending on the conditions, high conversions and good yields were obtained. The effects of adding cocatalysts (NHEt₂ and/or PPh₃) were studied in connection with the number‐average molecular weight and the molecular weight distribution of the resultant polymer ( poly 1 ) and tentatively correlated with the formation of low‐molecular‐weight materials. A catalytic system containing triphenylphosphine as the sole additive ([Rh(nbd)Cl]₂; [Rh]/[PPh₃] = 0.5) proved to be the best for the polymerization of p‐tert‐butylcalixarene compound 1 . Linear polymers having high number‐average molecular weights (up to 1.1 × 10⁵ g mol^?1) with low polydispersities were produced under these conditions. For debutylated homologue 2 , its polymerization was best carried out in the absence of any added cocatalyst. A cyclopolymerization route, comprising the intramolecular ring closing of the calix[4]arene pendant ethynyl groups followed by an intermolecular propagation step, is advanced to explain the results. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 7054–7070, 2006     

Complexation Thermodynamics of p-tert-Butylcalix[4]arene Derivatives with Light Lanthanoid Nitrates in Acetonitrile

Abstract

Calorimetric titrations have been performed for the first time in anhydrous acetonitrile at 25°C to give the complex stability constant (K _S) and thermodynamic quantities for the complexation of light lanthanoid(III) nitrates (La-Gd) with 5,11,17,23-tetra-tert-butyl-26,28-bis(cyanomethoxy)-25,27-dihydroxy-calix[4]arene (1) and 5,11,17,23-tetra-tert-butyl-26, 28-bis(2-aminoethoxy)-25,27-dihydroxycalix[4]arene (2). X-ray crystallographic structures of 1 and 2 were also determined and compared. Possessing the cyanomethoxy and aminoethyl substituents, 1 and 2 displayed strikingly different cation binding abilities and selectivity profiles with much higher K _S values for La³⁺ and Ce³⁺, which may be related to the original structures in the solid state. Thus, the binding profile for 2 showed a rapid decrease in K _S with decreasing ionic diameter from La³⁺ to Pr³⁺ and then became flat up to Gd³⁺, while 1 gave a very flat profile which is superimposable with that for 2 between Pr³⁺-Gd³⁺. Thermodynamically, the complexation is driven absolutely by enthalpy which compensates the entropic loss arising from the structural freezing of the calix[4]arene derivatives upon simultaneous binding of lanthanoid ion by the phenolic oxygen and acetonitrile molecule in the cavity. The general validity and the meaning of the compensative enthalpy-entropy relationship observed are discussed.     

Solvation effect of guest, supramolecular host, and host-guest compounds on the thermodynamic selectivity of calix(4)arene derivatives and soft metal cations

This paper reports thermodynamic data for the transfer of calixarene derivatives and their metal-ion complexes in dipolar aprotic solvents. These data are used to assess the effect of solvation of these compounds on the selective complexation shown by these macrocycles for soft metal cations in different media. Thus, solubilities and derived Gibbs energies of solution of 5,11,17,23-tetra-tert-butyl[25,27-bis(hydroxyl)-26,28-bis(ethylthioethoxy)]calix(4)arene, 1, and 5,11,17,23-tetra-tert-butyl-[25,27-bis(ethylenethanoate)-26,28-bis(ethylthioethoxy)]-calix(4)arene, 2, in various solvents at 298.15 K are reported. Solvation of these ligands in one medium relative to another is analyzed from their standard transfer Gibbs energies using acetonitrile as the reference solvent. These data are combined with transfer enthalpies (derived from standard solution enthalpies obtained calorimetrically) to calculate the corresponding entropies of transfer of these calix(4)arene derivatives from acetonitrile to methanol and N,N-dimethylformamide. As far as the metal-ion salts (silver and mercury) in their free and complex forms are concerned, standard solution enthalpies were determined in acetonitrile, methanol, and N,N-dimethylformamide. These data are used to derive their transfer enthalpies from one medium to another. It is concluded that the extent of complexation of these macrocycles with soft metal cations is controlled by not only the solvation changes that the free cation undergoes in moving from one medium to another but also those for the ligand and its complex cation in these solvents.     

Cu+ and Pt2+ complexes with a p-tert-butylcalix[4]arene fitted with two phosphine pendant arms

Reaction of 5,11,17,23-tetra-tert-butyl-25,27-dihydroxy-26,28-bis[{N-(2-diphenyl phosphino)phenyl}carboxyamidemethoxy]calix[4]arene with [Cu(CH₃CN)₄]ClO₄ and Pt(COD)Cl₂ gave two new complexes (1 and 2, respectively). Their structures were determined by X-ray analysis. Complex 1 has two seven-membered metallo-cycles and complex 2 has one five-membered metallo-cycle.     

Synthesis and Properties of New Thiacalixarene Derivatives with Palladium Ion

Three new thiacalix[4]arene derivatives, 5,11,17,23-tetra-tert-butyl-25,27-di(2-hydroxyethoxy)-26,28-dihydroxythiacalix-{}[4]arene (2), 5,11,17,23-tetra-tert-25, 26,27,28-tetrakis[(methylcarboxyl)methoxy]thiacalix[4]arene (3),5,11,17,23-tetra-tert-butyl-25,26,27,28-tetrakis(2-hydroxy-1-propanoxy)thiacalix[4]arene (4), were synthesized for the first time. The coordination properties of thiacalix[4]arene(1) and its derivatives (2 and 4) were investigated by detecting the interactions betweenthese compounds and two palladium complexes, cis-[Pd(en)(H₂O)₂]²⁺ and cis-[Pd(dtco-3-OH)(H₂O)₂]²⁺, by means of electrospray ionization mass spectrometry (ESI-MS) technique.