Variable Fluid Property Effect on Heat Transfer and Frictional Flow Characteristics of Water Flowing through Microchannel

The effects of temperature-dependent viscosity and thermal conductivity on heat transfer and frictional flow characteristics of water flowing through a microchannel are numerically investigated in this work. The hydrodynamically and thermally developing flow with no-slip, notemperature jump, and constant wall heat flux boundary condition is numerically studied using 2D continuum-based conservation equations. A significant deviation in Nusselt number from conventional theory is observed due to flattening of axial velocity profile due to temperaturedependent viscosity variation. The Nusselt number shows a significant deviation from conventional theory due to flattening of the radial temperature profile due to temperature-dependent thermal conductivity variation. It is noted that the deviation in Nusselt number from conventional theory is maximum for combined temperature-dependent viscosity and thermal conductivity variations. The effects of temperature-dependent viscosity and thermal conductivity on the Fanning friction factor are also investigated. Additionally, the effects of variable fluid properties on Poiseuille number, Prandtl number, and Peclet number are also investigated.     

基于基液连续假设的大体系Cu-H2O纳米流体输运特性的模拟研究

分子动力学模拟是研究纳米流体的输运特性的重要手段, 但计算量庞大. 为研究能体现流动传热过程的大体系纳米流体的输运特性, 本文对基液采用连续介质假设, 将基液的势能拟合在纳米团簇的势能中, 大幅度减小了计算量, 使得大体系输运特性的模拟成为可能, 且模拟结果与多组实验结果吻合较好. 采用此方法模拟研究了速度梯度剪切对Cu-H₂O纳米流体颗粒聚集过程和聚集特性的影响, 进而对Cu-H₂O纳米流体在流动传热过程中的热导率和黏度进行了模拟计算, 定量揭示了宏观流动传热过程中不同的速度梯度、速度、平均温度和温度梯度对于Cu-H₂O纳米流体热导率和黏度的影响.     

A numerical study of MHD generalized Couette flow and heat transfer with variable viscosity and electrical conductivity

The steady flow and heat transfer of an electrically conducting fluid with variable viscosity and electrical conductivity between two parallel plates in the presence of a transverse magnetic field is investigated. It is assumed that the flow is driven by combined action of axial pressure gradient and uniform motion of the upper plate. The governing nonlinear equations of momentum and energy transport are solved numerically using a shooting iteration technique together with a sixth-order Runge-Kutta integration algorithm. Solutions are presented in graphical form and given in terms of fluid velocity, fluid temperature, skin friction and heat transfer rate for various parametric values. Our results reveal that the combined effect of magnetic field, viscosity, exponents of variable properties, various fluid and heat transfer dimensionless quantities and the electrical conductivity variation, have significant impact on the hydromagnetic and electrical properties of the fluid.     

Variable fluid properties and variable heat flux effects on the flow and heat transfer in a non-Newtonian Maxwell fluid over an unsteady stretching sheet with slip velocity

The effects of variable fluid properties and variable heat flux on the flow and heat transfer of a non-Newtonian Maxwell fluid over an unsteady stretching sheet in the presence of slip velocity have been studied. The governing differential equations are transformed into a set of coupled non-linear ordinary differential equations and then solved with a numerical technique using appropriate boundary conditions for various physical parameters. The numerical solution for the governing non-linear boundary value problem is based on applying the fourth-order Runge-Kutta method coupled with the shooting technique over the entire range of physical parameters. The effects of various parameters like the viscosity parameter, thermal conductivity parameter, unsteadiness parameter, slip velocity parameter, the Deborah number, and the Prandtl number on the flow and temperature profiles as well as on the local skin-friction coefficient and the local Nusselt number are presented and discussed. Comparison of numerical results is made with the earlier published results under limiting cases.     

Effect of melting heat transfer and thermal radiation on Casson fluid flow in porous medium over moving surface with magnetohydrodynamics

In this study, the effects of variable fluid properties on heat transfer in MHD Casson fluid melts over a moving surface in a porous medium in the presence of the radiation are examined. The relevant similarity transformations are used to reduce the governing equations into a system of highly nonlinear ordinary differential equations and those are then solved numerically using the Runge–Kutta–Fehlbergmethod. The effects of different controlling parameters, namely, the Casson parameter,melting and radiation parameters, Prandtl number,magnetic field, porosity, viscosity and the thermal conductivity parameters on flow and heat transfer are investigated. The numerical results for the dimensionless velocity and temperature as well as friction factor and reducedNusselt number are presented graphically and discussed. It is found that the rate of heat transfer increases as the Casson parameter increases.     

Numerical simulation of heat transfer and fluid flow of Water-CuO Nanofluid in a sinusoidal channel with a porous medium

This study has compared the convection heat transfer of Water-based fluid flow with that of Water-Copper oxide (CuO) nanofluid in a sinusoidal channel with a porous medium. The heat flux in the lower and upper walls has been assumed constant, and the flow has been assumed to be two-dimensional, steady, laminar, and incompressible. The governing equations include equations of continuity, momentum, and energy. The assumption of thermal equilibrium has been considered between the porous medium and the fluid. The effects of the parameters, Reynolds number and Darcy number on the thermal performance of the channel, have been investigated. The results of this study show that the presence of a porous medium in a channel, as well as adding nanoparticles to the base fluid, increases the Nusselt number and the convection heat transfer coefficient. Also the results show that As the Reynolds number increases, the temperature gradient increases. In addition, changes in this parameter are greater in the throat of the flow than in convex regions due to changes in the channel geometry. In addition, porous regions reduce the temperature difference, which in turn increases the convective heat transfer coefficient.     

Effect of Hall current on the velocity and temperature distributions of Couette flow with variable properties

The unsteady hydromagnetic Couette flow and heat transfer between two parallel porous plates is studied with the Hall effect and temperature dependent properties. The fluid is acted upon by a constant pressure gradient and an external uniform magnetic field as well as uniform suction and injection applied perpendicular to the parallel plates. A numerical solution for the governing non-linear equations of motion and the energy equation are obtained. The effect of the Hall term and the temperature-dependent viscosity and thermal conductivity on both velocity and temperature distributions is examined.     

高温吸热管内超临界CO2传热特性的数值模拟

研究超临界CO2在高温吸热管内的传热特性是将其应用于聚光太阳能热发电技术中的基础.本文对此进行了数值模拟研究,分析了流体温度、流动方向、系统压力、质量流率和热流密度对对流传热系数和Nu数的影响.结果表明:高温区(800—1050 K)的对流传热系数和Nu数受流动方向和系统压力的影响均很小,但都随着质量流率的增大以及热流密度的减小而明显增大;而随着流体温度的升高,对流传热系数近似线性增大,Nu数则近似线性减小.另外,本文研究发现在高温区可忽略浮升力对传热的影响,而由高热流密度引起的流动加速效应会明显恶化传热.最后,选取了八种管内超临界流体传热关联式与模拟结果进行对比,发现使用基于热物性修正的关联式对高温区传热数据预测的结果优于使用基于无量纲数修正的关联式得到的结果,且其中预测效果最优的关联式得到的计算结果与模拟结果之间的平均绝对相对偏差为8.1%.     

Effects of variable properties on MHD heat and mass transfer flow near a stagnation point towards a stretching sheet in a porous medium with thermal radiation

The effect of variable viscosity and thermal conductivity on steady magnetohydrodynamic(MHD) heat and mass transfer flow of viscous and incompressible fluid near a stagnation point towards a permeable stretching sheet embedded in a porous medium are presented,taking into account thermal radiation and internal heat genberation/absorbtion.The stretching velocity and the ambient fluid velocity are assumed to vary linearly with the distance from the stagnation point.The Rosseland approximation is used to describe the radiative heat flux in the energy equation.The governing fundamental equations are first transformed into a system of ordinary differential equations using a scaling group of transformations and are solved numerically by using the fourth-order Rung-Kutta method with the shooting technique.A comparison with previously published work has been carried out and the results are found to be in good agreement.The results are analyzed for the effect of different physical parameters,such as the variable viscosity and thermal conductivity,the ratio of free stream velocity to stretching velocity,the magnetic field,the porosity,the radiation and suction/injection on the flow,and the heat and mass transfer characteristics.The results indicate that the inclusion of variable viscosity and thermal conductivity into the fluids of light and medium molecular weight is able to change the boundary-layer behavior for all values of the velocity ratio parameter λ except for λ = 1.In addition,the imposition of fluid suction increases both the rate of heat and mass transfer,whereas fluid injection shows the opposite effect.     

Physics and mechanics of heat exchange processes in nanofluid flows

Nanofluids present a new type of dispersed fluids consisting of a carrier fluid and solid nanoparticles. Unusual properties of nanofluids, particularly high thermal conductivity, make them eminently suitable for many thermophysical applications, e.g., for cooling of equipment, designing of new heat energy transportation and production systems and so on. This requires a systematic study of heat exchange properties of nanofluids. The present paper contains the measurement results for the heat transfer coefficient of the laminar and turbulent flow of nanofluids on the basis of distilled water with silica, alumina and copper oxide particles in a minichannel with circular cross section. The maximum volume concentration of particles did not exceed 2%. The dependence of the heat transfer coefficient on the concentration and size of nanoparticles was studied. It is shown that the use of nanofluids allows a significant increase in the heat transfer coefficient as compared to that for water. However, the obtained result strongly depends on the regime of flow. The excess of the heat transfer coefficient in the laminar flow is only due to an increase in the thermal conductivity coefficient of nanofluid, while in the turbulent flow the obtained effect is due to the ratio between the viscosity and thermal conductivity of nanofluid. The viscosity and thermal conductivity of nanofluids depend on the volume concentration of nanoparticles as well as on their size and material and are not described by classical theories. That is why the literature data are diverse and contradictory; they do not actually take into account the influence of the mentioned factors (size and material of nanoparticles). It has been shown experimentally and by a molecular dynamics method that the nanofluid viscosity increases while the thermal conductivity decreases with the decreasing dispersed particle size. It is found experimentally for the first time that the nanofluid viscosity coefficient depends on the particle material. The higher is the density of particles, the higher is the thermal conductivity coefficient of nanofluid.     

MHD swirling flow and heat transfer in Maxwell fluid driven by two coaxially rotating disks with variable thermal conductivity

We develop a mathematical modeling for an electrically conducting non-Newtonian Maxwell fluid flow occurring between two coaxially parallel stretchable rotating disks at constant distant apart. The pressure and heat transfer analysis is carried out subject to the effects of axial magnetic field and temperature dependent thermal conductivity. The stretching and rotating rates of both disks are assumed different from each other. The two diverse phenomena, such as, when both disks are rotating with different angular velocities in the same as well as in the opposite directions are discussed. The similarity procedure adopted by von Kármán is utilized to reduce the governing momentum and energy equations into nonlinear ordinary differential equations. The solution of the governing problem is obtained numerically using bvp4c scheme in Matlab. The effects of active parameters including stretching rates, Deborah number, magnetic number, Prandtl number, thermal conductivity parameter and Reynolds number are examined for same as well as opposite rotation direction for radial, azimuthal, and axial flows, pressure and temperature fields. The classical flow pattern happening between the disks is significantly altered by the stretching action which is a main physical significances of this study. The azimuthal flow is observed higher for the same direction of disks rotation as compared to opposite disks rotation. The pressure field drops near the lower disk with increasing values of Reynolds number. The role of thermal conductivity parameter is quite useful to enhance the fluid temperature.     

三维有序排列多孔介质对流换热的数值研究

利用CFD软件数值研究了颗粒三维有序堆积多孔介质的对流换热问题. 采用颗粒直径分别为14 mm,9.4 mm和7 mm的球形颗粒有序排列构成多孔介质骨架,在多孔骨架的上方有一恒热流密度的铜板. 采用流固耦合的方法研究了槽通道内温度分布和局部对流换热系数的分布以及对流换热的影响因素. 研究结果表明:热渗透的厚度和温度边界层的厚度在流动方向上逐渐增大,并且随流量的增加而减小;当骨架的导热系数比较高时,对流换热随颗粒直径的减小而略有增大;对流换热系数随聚丙烯酰胺溶液浓度的增大而减小,黏性耗散减弱了对流换热. 关键词： 多孔介质 温度场 局部对流换热系数 数值模拟     

低温下粗糙表面接触间隙气体热导的研究

对低温非真空环境下粗糙接触界面间隙中介质气体的传热进行了理论分析．依据克努森数的大小,建立了不同传热区域的间隙气体热导理论模型．并对影响接触界面间隙热导的克努森数、普朗特数、热导率、适应系数、压力等参数进行了分析,为实际情况下接触界面的传热提供了理论基础．而且通过实验证明了在界面接触压力较小的情况下,即使对于硬度较小导热性能好的接触固体,间隙气体的导热量仍大于通过实际接触点的导热量．     

磁流体热疗中热质传递耦合作用研究

为研究肿瘤磁流体热疗过程中温度梯度与浓度梯度间的耦合效应对磁微粒的弥散及肿瘤内传热的影响,本文根据非平衡热力学唯象定律建立了包含浓度场及温度场的耦合传热传质模型,以常数形式的热扩散系数表征温度梯度对传质过程的影响程度。通过有限元法求解,得到考虑双场耦合作用时肿瘤内的浓度分布和温度分布。模拟结果表明,与不考虑耦合效应的情...     

A molecular dynamics simulation on the convective heat transfer in nanochannels

The understanding of the flow and heat transfer processes for fluid through micro- and nanochannels becomes imperative due to its wide application in micro- and nano-fluidic devices. In this paper, the method to simulate the convective heat transfer process in molecular dynamics is improved based on a previous study. With this method, we simulate a warm dense fluid flowing through a cold parallel-plate nanochannel with constant wall temperature. The characteristics of the velocity and temperature fields are analysed. The temperature difference between the bulk average temperature of fluid and the wall temperature decreases in an exponential form along the flow direction. The Nusselt number for the laminar flow in parallel-plate nanochannel is smaller than its corresponding value at macroscale. It could be attributed to the temperature jump at the fluid–wall interface, which decreases the temperature gradient near the wall. The results also reveal that the heat transfer coefficient is related to the surface wettabilities, which differs from that in the macroscopic condition.     

Prediction of thermal conductivity and viscosity of nanofluids by molecular dynamics simulation

Limitations of conventional heat transfer fluids in different industries because of their poor thermal conductivity made heat transfer improvement in working fluids was performing, as a new method of advanced heat transfer. Therefore, the dispersion solid particle idea in fluids, which has been started with mili- and micrometer particles, completed by using nanoparticles and today nanofluids have been found to provide a considerable heat transfer and viscosity enhancement in comparison to conventional fluids such as water, ethylene glycol, and engine oil. In this study, molecular dynamics simulation was used to predict thermal conductivity and viscosity of nanofluids. Water was used as a base fluid. The simple point charge-extended (SPC/E) model was used for simulation of water and Ewald sum method for electrostatic interactions. Lennard–Jones potential for Van der Waals interactions, KTS potential for water and SiO₂ and Spor and Heinzinger correlation for water and Pt were used. The results were compared with experimental data. For investigation of the effect of temperature, simulation was done for three temperatures of 20, 30, and 50?C. The results showed that the ratio of thermal conductivity of nanofluid to base fluid and viscosity will decrease as the temperature increases. The effect of the concentration of nanoparticle was studied for three different concentrations, namely, 0.45, 1.85, and 4%. The thermal conductivity of nanofluid increases with increasing the concentration. Moreover, the effect of two nanoparticle sizes (i.e., 5 and 7 nm) on the thermal conductivity of nanofluid was investigated. It was shown that an increase in the size causes a decrease in the thermal conductivity. Finally, by replacing the SiO₂nanoparticle with a Pt nanoparticle in the nanofluid, it was observed that the kind of nanoparticle had not a considerable effect on increasing the thermal conductivity of nanofluid.     

Heat Transfer and Pressure Drop Characteristics of Graphene Oxide/Water Nanofluid in a Circular Tube Fitted with Wire Coil Insert

In this work, heat transfer and pressure drop characteristics of graphene oxide/water nanofluid flow through a circular tube having a wire coil insert were studied. The required graphene oxide was synthesized via the Hummer method and characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (SRD), and scanning electron microscope (SEM) methods. Dispersing graphene oxide in the water, nanofluids with 0.02, 0.07, and 0.12% volume fraction were prepared. An experimental set-up was designed and made to investigate the heat transfer performance and pressure loss of nanofluids. All experiments were carried out in the constant heat flux at tube wall conditions. The volumetric flow rates of the nanofluid were adjusted at 6, 8, and 10 L/min. Thermal conductivity, specific heat, density, and viscosity as thermophysical properties of the nanofluid were calculated using graphene oxide and water properties at the average temperature via appropriate relations. These properties were applied to calculate the convective heat transfer coefficient, Nusselt number, and friction factors for each experiment. Finally, the constant and exponents of Duangthongsuk and Wongwises's correlations for Nusselt number and friction factor were corrected by experimental results. The achieved experimental data have shown good agreement with those predicted. The results have shown that 0.12 vol% of graphene oxide in the water can enhance convective heat transfer coefficient by about 77%. As a result, it can be concluded that the graphene oxide/water can be used in the heat transfer devices to achieve more efficiency.     

Unsteady radiative nanofluid flow near a vertical heated wavy surface with temperature-dependent viscosity

In the present contribution, a numerical treatment is provided to describe unsteady nanofluid flow near a vertical heated wavy surface. A memorable feature of the present work is the investigation of nanofluid flow associated with thermal radiation that acts as a catalyst for heat transfer rates. Likewise, the effectiveness of variable viscosity is examined as it controls fluid flow as well as heat transfer. It is necessary to study heat and mass transfer for complex geometries because predicting heat and mass transfer for irregular surfaces is a topic of fundamental importance, and irregular surfaces frequently appear in many applications, such as flat-plate solar collectors and flat-plate condensers in refrigerators. A simple coordinate transformation from the wavy surface into a flat one is employed. The non-dimensional boundary layer equations that governing both heat transfer and nanofluid flow phenomena along the wavy surface are solved via a powerful numerical approach called the implicit Chebyshev pseudospectral (ICPS) method with Mathematica code. A comparison graph of the current numerical computation and the published data shows a perfect match. Figures depict the effect of various physical parameters on nanofluid velocities, temperature, salt concentration, nanoparticle concentration, skin friction, Sherwood, nanoparticle Sherwood, and Nusselt numbers. According to the numerical results, increasing the variable viscosity parameter value causes a drop in the local skin friction coefficient value and an increase in the steady-state axial nanofluid velocity profile near the wavy surface. Furthermore, as heat radiation is increased, the local Nusselt number decreases but the nanoparticle Sherwood number increases.     

相变换热混合工质板翅式换热器流动与传热数值模拟

采用由SRK方程计算得出的混合工质物性参数,将具有相变两相流体物性分三部分处理,得出混合工质分段物性数据拟合曲线,并输入FLUENT软件的材料物性数据文件中,作为数值模拟物性参数数据。在上述物性数据处理的基础上,对混合工质天然气液化装置中换热器采用分段方式进行稳态数值模拟研究,得到沿长度方向一定温度下传热系数、压力梯度的变化曲线。通过与MUSE软件数据比较,计算结果有一定合理性,所得结论为有相变换热的混合工质低温板翅式换热器的设计和优化提供一定参考。     

高压热处理对铝青铜热物理性能的影响

在5 GPa压力下对铝青铜进行750℃、保温15 min的高压热处理,对高压热处理前后铝青铜的电导率以及25～600℃温度范围内的热扩散系数、热容和热导率进行测试,结合显微组织的观察结果,探讨了高压热处理对铝青铜热物理性能的影响。研究表明:高压热处理能增大铝青铜的热扩散系数,减小热容;对热导率而言,温度低于400℃时高压热处理能增大铝青铜的热导率,而温度高于400℃时高压热处理能减小铝青铜的热导率。分析认为,产生变化的主要原因是高压热处理使铝青铜的微观组织发生了变化。