Anionic bulk oligomerization of ethylene and propylene carbonate initiated by bisphenol‐A/base systems

When the bulk oligomerization of 1,3‐dioxolan‐2‐one (ethylene carbonate, EC) and 4‐methyl‐1,3‐dioxolan‐2‐one (propylene carbonate, PC) with the 2,2‐bis(4‐hydroxyphenyl)propane (bisphenol‐A, BPA)/base system (bases such as KHCO₃, K₂CO₃, KOH, Li₂CO₃, and t‐BuOK) was investigated at elevated temperature, significant differences were observed. Oligomerization of EC initiated by BPA/base readily takes place, but the oligomerization of PC is inhibited. The very first propylene carbonate/propylene oxide unit readily forms a phenolic ether bond with the functional groups of BPA phenolate, but the addition of the second monomer unit is rather slow. The oligomerization of EC yields symmetrical oligo(ethylene oxide) side chains. According to IR studies the oligomeric chains formed from PC with BPA contain not only ether but also carbonate bonds. The in situ step oligomerization of the BPA dipropoxylate was also identified by SEC, and a possible reaction mechanism is proposed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 545–550, 1999     

The Regio‐ and Stereospecific Intermolecular Dehydrative Alkoxylation of Allylic Alcohols Catalyzed by a Gold(I) N‐Heterocyclic Carbene Complex

A 1:1 mixture of [AuCl(IPr)] (IPr=1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidine) and AgClO₄ catalyzes the intermolecular dehydrative alkoxylation of primary and secondary allylic alcohols with aliphatic primary and secondary alcohols to form allylic ethers. These transformations are regio‐ and stereospecific with preferential addition of the alcohol nucleophile at the γ‐position of the allylic alcohol syn to the departing hydroxyl group and with predominant formation of the E stereoisomer. The minor α regioisomer is formed predominantly through a secondary reaction manifold involving regioselective γ‐alkoxylation of the initially formed allylic ether rather than by the direct α‐alkoxylation of the allylic alcohol.     

Organoiodine‐Catalyzed Enantioselective Alkoxylation/Oxidative Rearrangement of Allylic Alcohols

An enantioselective catalytic alkoxylation/oxidative rearrangement of allylic alcohols has been established by using a Brønsted acid and chiral organoiodine. The presence of 20 mol % of an (S)‐proline‐derived C₂‐symmetric chiral iodine led to enantioenriched α‐arylated β‐alkoxylated ketones in good yields and with high levels of enantioselectivity (84–94 % ee).     

Construction of Versatile and Functional Nanostructures Derived from CO2‐based Polycarbonates

The construction of amphiphilic polycarbonates through epoxides/CO₂ coupling is a challenging aim to provide more diverse CO₂‐based functional materials. In this report, we demonstrate the facile preparation of diverse and functional nanoparticles derived from a CO₂‐based triblock polycarbonate system. By the judicious use of water as chain‐transfer reagent in the propylene oxide/CO₂ polymerization, poly(propylene carbonate (PPC) diols are successfully produced and serve as macroinitiators in the subsequent allyl glycidyl ether/CO₂ coupling reaction. The resulting ABA triblock polycarbonate can be further functionalized with various thiols by radical mediated thiol–ene click chemistry, followed by self‐assembly in deionized water to construct a versatile and functional nanostructure system. This class of amphiphilic polycarbonates could embody a powerful platform for biomedical applications.     

Aza‐Crown Ether Complex Cation Ionic Liquids: Preparation and Applications in Organic Reactions

Aza‐crown ether complex cation ionic liquids (aCECILs) were devised, fabricated, and characterized by using NMR spectroscopy, MS, thermogravimetric differential thermal analysis (TG‐DTA), elemental analysis and physical properties. These new and room‐temperature ILs were utilized as catalysts in various organic reactions, such as the cycloaddition reaction of CO₂ to epoxides, esterification of acetic acid and alcohols, the condensation reaction of aniline and propylene carbonate, and Friedel–Crafts alkylation of indole with aldehydes were investigated carefully. In these reactions, the ionic liquid exhibited cooperative catalytic activity between the anion and cation. In addition, the aza‐[18‐C‐6HK][HSO₄]₂ was the best acidic catalyst in the reactions of esterification and Friedel–Crafts alkylation under mild reaction conditions.     

Vinyl ether end‐groups in poly(ethylene glycol)s from the Na2CO3‐promoted degradation of 1,3‐dioxolan‐2‐one polymers

The Na₂CO₃‐promoted polymerization of 1,3‐dioxolan‐2‐one (I) to afford poly(ethylene glycol) III was reinvestigated. The reaction appeared to involve a nucleophilic attack against the carbonyl and methylene groups of I to afford poly(carbonate) II with poly(ethylene glycol) linkages and ethylene oxide IV as a side product (10–22%). As the reaction progressed, poly(carbonate) II decreased and poly(ethylene glycol) III increased. Under some conditions, poly(ethylene glycol)s V and VI with vinyl ether terminal groups were formed unexpectedly. The formation of unsaturated products during the polymerization of I/EO (ethylene oxide) has not been reported in the literature. We believe that vinyl ethers were formed from the degradation of poly(carbonate)s and were accompanied by a reduction in molecular weight. The structures of vinyl ethers V and VI were confirmed by hydrogenation of the double bond into the ethyl ether group in VII and VIII, respectively. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 152–160, 2000     

Investigations of Scope and Mechanism of Nickel‐Catalyzed Transformations of Glycosyl Trichloroacetimidates to Glycosyl Trichloroacetamides and Subsequent,Atom‐Economical,One‐Step Conversion to α‐Urea‐Glycosides

The development and mechanistic investigation of a highly stereoselective methodology for preparing α‐linked‐urea neo‐glycoconjugates and pseudo‐oligosaccharides is described. This two‐step procedure begins with the selective nickel‐catalyzed conversion of glycosyl trichloroacetimidates to the corresponding α‐trichloroacetamides. The α‐selective nature of the conversion is controlled with a cationic nickel(II) catalyst, [Ni(dppe)(OTf)₂] (dppe=1,2‐bis(diphenylphosphino)ethane, OTf=triflate). Mechanistic studies have identified the coordination of the nickel catalyst with the equatorial C₂‐ether functionality of the α‐glycosyl trichloroacetimidate to be paramount for achieving an α‐stereoselective transformation. A cross‐over experiment has indicated that the reaction does not proceed in an exclusively intramolecular fashion. The second step in this sequence is the direct conversion of α‐glycosyl trichloroacetamide products into the corresponding α‐urea glycosides by reacting them with a wide variety of amine nucleophiles in presence of cesium carbonate. Only α‐urea‐product formation is observed, as the reaction proceeds with complete retention of stereochemical integrity at the anomeric C?N bond.     

Dicarboxylic acid promoted immortal copolymerization for controllable synthesis of low‐molecular weight oligo(carbonate‐ether) diols with tunable carbonate unit content

Low‐molecular weight oligo(carbonate‐ether) diols are important raw materials for polyurethane formation, which with tunable carbonate unit content (CU) may endow new thermal and mechanical performances to polyurethane. Herein, facile synthesis of oligo(carbonate‐ether) diols with number average molecular weight (M_n) below 2000 g mol^?1 and CU tunable between 40% and 75% are realized in high activity by immortal copolymerization of CO₂/propylene oxide (PO) using zinc‐cobalt double metal cyanide complex (Zn‐Co‐DMCC) in the presence of sebacic acid (SA). M_n of the oligomer is in good linear relationship to the mole ratio of PO and SA (PO/SA) and hence can be precisely controlled by adjusting PO/SA. Besides, the molecular weight distribution is quite narrow due to the rapid reversible chain transfer in the immortal copolymerization. High pressure and low temperature are favorable for raising CU. In all the reactions, the weight fraction of propylene carbonate (W_PC) can even be controlled as low as 2.0 wt %, and the catalytic activity of Zn‐Co‐DMCC is above 1.0 kgg^?1 cat. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Transparent Films from CO2‐Based Polyunsaturated Poly(ether carbonate)s: A Novel Synthesis Strategy and Fast Curing

Transparent films were prepared by cross‐linking polyunsaturated poly(ether carbonate)s obtained by the multicomponent polymerization of CO₂, propylene oxide, maleic anhydride, and allyl glycidyl ether. Poly(ether carbonate)s with ABXBA multiblock structures were obtained by sequential addition of mixtures of propylene oxide/maleic anhydride and propylene oxide/allyl glycidyl ether during the polymerization. The simultaneous addition of both monomer mixtures provided poly(ether carbonate)s with AXA triblock structures. Both types of polyunsaturated poly(ether carbonate)s are characterized by diverse functional groups, that is, terminal hydroxy groups, maleate moieties along the polymer backbone, and pendant allyl groups that allow for versatile polymer chemistry. The combination of double bonds substituted with electron‐acceptor and electron‐donor groups enables particularly facile UV‐ or redox‐initiated free‐radical curing. The resulting materials are transparent and highly interesting for coating applications.     

Dynamics of the NbCl5‐Catalyzed Cycloaddition of Propylene Oxide and CO2: Assessing the Dual Role of the Nucleophilic Co‐Catalysts

A mechanistic study on the synthesis of propylene carbonate (PC) from CO₂ and propylene oxide (PO) catalyzed by NbCl₅ and organic nucleophiles such as 4‐dimethylaminopyridine (DMAP) or tetra‐n‐butylammonium bromide (NBu₄Br) is reported. A combination of in situ spectroscopic techniques and kinetic studies has been used to provide detailed insight into the reaction mechanism, the formation of intermediates, and interactions between the reaction partners. The results of DFT calculations support the experimental observations and allow us to propose a mechanism for this reaction.     

Alternating copolymerization of carbon dioxide and propylene oxide catalyzed by (R,R)‐SalenCoIII‐ (2,4‐dinitrophenoxy) and Lewis‐basic cocatalyst

A binary catalyst system of a chiral (R,R)‐SalenCo^III(2,4‐dinitrophenoxy) (salen = N,N‐bis(3,5‐di‐tert‐butylsalicylidene)‐1,2‐diphenylethylenediimine) in conjunction with (4‐dimethylamino)pyridine (DMAP) was developed to generate the copolymerization of carbon dioxide (CO₂) and racemic propylene oxide (rac‐PO). The influence of the molar ratio of catalyst components, the operating temperature, and reaction pressure on the yield as well as the molecular weight of polycarbonate were systematically investigated. High yield of turnover frequency (TOF) 501.2 h^?1 and high molecular weight of 70,400 were achieved at an appropriate combination of all variables. The structures of as‐prepared products were characterized by the IR, ¹H NMR, ¹³C NMR measurements. The linear carbonate linkage, highly regionselectivity and almost 100% carbonate content of the resulting polycarbonate were obtained with the help of these effective catalyst systems under facile conditions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5050–5056, 2007     

Synthesis of poly(isopropenylphenoxy propylene carbonate) and its facile side‐chain functionalization into hydroxy‐polyurethanes

4‐Isopropenyl phenol ( 4‐IPP ) is a versatile dual functional intermediate that can be prepared readily from bisphenol‐A ( BPA ). Through etherification with epichlorohydrin to the phenolic group of 4‐IPP , it can be converted into 4‐isopropenyl phenyl glycidyl ether ( IPGE ). On further reaction with carbon dioxide in the presence of tetra‐n‐butyl ammonium bromide ( TBAB ) as the catalyst, IPGE was transformed into 4‐isopropenylphenoxy propylene carbonate ( IPPC ) in 90% yield. Cationic polymerization of IPPC with strong acid such as trifluoromethanesulfonic acid or boron trifluoride diethyl etherate as the catalyst at ?40 °C gave a linear poly(isopropenylphenoxy propylene carbonate), poly( IPPC ), with multicyclic carbonate groups substituted uniformly at the side‐chains of the polymer. The cyclic carbonate groups of poly( IPPC ) were further reacted with different aliphatic amines and diamines resulting in formation of polymers with hydroxy‐polyurethane on side‐chains. Syntheses, characterizations of poly( IPPC ) and its conversion into hydroxy‐polyurethane crosslinked polymers were presented. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 802–808     

Oxygen‐Triggered Switchable Polymerization for the One‐Pot Synthesis of CO2‐Based Block Copolymers from Monomer Mixtures

Switchable polymerization provides the opportunity to regulate polymer sequence and structure in a one‐pot process from mixtures of monomers. Herein we report the use of O₂ as an external stimulus to switch the polymerization mechanism from the radical polymerization of vinyl monomers mediated by (Salen)Co^III?R [Salen=N,N′‐bis(3,5‐di‐tert‐butylsalicylidene)‐1,2‐cyclohexanediamine; R=alkyl] to the ring‐opening copolymerization (ROCOP) of CO₂/epoxides. Critical to this process is unprecedented monooxygen insertion into the Co?C bond, as rationalized by DFT calculations, leading to the formation of (Salen)Co^III?O?R as an active species to initiate ROCOP. Diblock poly(vinyl acetate)‐b‐polycarbonate could be obtained by ROCOP of CO₂/epoxides with preactivation of (Salen)Co end‐capped poly(vinyl acetate). Furthermore, a poly(vinyl acetate)‐b‐poly(methyl acrylate)‐b‐polycarbonate triblock copolymer was successfully synthesized by a (Salen)cobalt‐mediated sequential polymerization with an O₂‐triggered switch in a one‐pot process.     

Significant Heterogeneous Carbonate Salt Catalyzed Acetylation of Alcohols via a Transesterification Process with Carbonate Salt‐activated Alcohol 1H NMR Evidence

Heterogeneous carbonate salt catalyzed acetylation of alcohols via a transesterification process has been developed. Various esters are furnished up to 97% yield. Established procedure is simple and air‐tolerant with readily available reagents. Ethyl acetate and isobutyl acetate are used as not only acetylating agents, but also reaction solvents in transesterification. Aliphatic linear alcohols, allylic alcohols and benzyl alcohols show high reactivities in the presence of 1 or 5 mol% Cs₂CO₃ at 125°C. Cesium carbonate can be recycled by pumping liquid phase out of reactor after reaction. During four cycle runs for reaction of 2‐phenylethanol and ethyl acetate, high yields of phenethyl acetate are provided (>60% yield). Based on experiments and ¹H NMR investigation, bifunctional catalysis is proposed, alcohol activated by carbonate ion is confirmed, and higher activity of catalytic amount than stoichiometric cesium carbonate is interpreted.     

Cobalt‐Catalyzed C(sp2)H Alkoxylation of Aromatic and Olefinic Carboxamides

The cobalt‐catalyzed alkoxylation of C(sp²)? H bonds in aromatic and olefinic carboxamides has been developed. The reaction proceeded under mild conditions in the presence of Co(OAc)₂?4H₂O as the catalyst and tolerates a wide range of both alcohols and benzamide substrates, including even olefinic carboxamides. In addition, this reaction is the first example of the direct alkoxylation of alkenes through C? H bond activation.     

Silver(I)‐Catalyzed Three‐Component Reaction of Propargylic Alcohols,Carbon Dioxide and Monohydric Alcohols: Thermodynamically Feasible Access to β‐Oxopropyl Carbonates

A silver(I)‐catalyzed three‐component reaction of propargylic alcohols, CO₂, and monohydric alcohols was successfully developed for the synthesis of β‐oxopropyl carbonates. As such, a series of β‐oxopropyl carbonates were exclusively produced in excellent yields (up to 98 %), even under atmospheric pressure of CO₂. The silver catalyst works efficiently for both the carboxylative cyclization of propargylic alcohols with CO₂ and subsequent transesterification of α‐alkylidene cyclic carbonates with monohydric alcohols; thus this tandem process performs smoothly under mild conditions. This work provides a versatile and thermodynamically favorable approach to dissymmetric dialkyl carbonates.     

Facile preparation and synergy study of DMC/ZnGA composite catalyst for the synthesis of oligo (propylene‐carbonate) diols

To overcome the weak carbon dioxide (CO₂) conversion ability of Zn‐Co double metal cyanide (DMC) catalyst, zinc glutarate (ZnGA) catalyst was introduced into the DMC catalytic system and applied for the synthesis of oligo (propylene‐carbonate) diols. The DMC/ZnGA composite catalyst (mass ratio = 10:1) exhibited an excellent synergistic effect which had enhanced CO₂ activation ability, high yield and good selectivity. In copolymerization process, ZnGA catalyst not only provided activated CO₂ for DMC catalyst, but also transferred the propagating chain with more alternating structures to DMC catalyst. Both of the two effects increased the carbonate content in the final products. Overall, DMC catalyst dedicated to the polymer chain growth, while the increased CO₂ conversion mainly attributed to ZnGA catalyst. Oligo (propylene‐carbonate) diols with carbonate unit content of 45.1 mol%, Mn of 1228 g/mol, W_PC of 4.3 wt% and high yield of 1689 g/g _cat was obtained.     

Lewis Acid Catalyzed Synthesis of 1‐Aryl‐1,2‐dihydro‐naphtho[1,2‐e][1,3]oxazin‐3‐ones under Solvent Free Conditions: A Mechanistic Approach

Lewis acids catalyzed highly efficient one‐pot three component coupling of β‐naphthol, benzaldehydes and urea to produce 1‐aryl‐1,2‐dihydro‐naphtho[1,2‐e][1,3]oxazin‐3‐one derivatives under solvent free conditions is described. Mechanistic studies confirmed that product formation is possible only at very high temperature (140–150°C) and at lower temperature (90–100°C) formation of 14‐aryl‐14H‐dibenzo(a,j)xanthenes was observed. Among the nine Lewis acids screened, iodine, P₂O₅ and Yb(OTf)₃ are found to be most effective catalyst for this multicomponent reaction.     

Manganese‐Catalyzed Multicomponent Synthesis of Pyrimidines from Alcohols and Amidines

The development of catalytic reactions for synthesizing different compounds from alcohols to save fossil carbon feedstock and reduce CO₂ emissions is of high importance. Replacing rare noble metals with abundantly available 3d metals is equally important. We report a manganese‐complex‐catalyzed multicomponent synthesis of pyrimidines from amidines and up to three alcohols. Our reaction proceeds through condensation and dehydrogenation steps, permitting selective C−C and C−N bond formations. β‐Alkylation reactions are used to multiply alkylate secondary alcohols with two different primary alcohols to synthesize fully substituted pyrimidines in a one‐pot process. Our PN₅P‐Mn‐pincer complexes efficiently catalyze this multicomponent process. A comparison of our manganese catalysts with related cobalt catalysts indicates that manganese shows a reactivity similar to that of iridium but not cobalt. This analogy could be used to develop further (de)hydrogenation reactions with manganese complexes.     

Hydrophilic CO2‐based biodegradable polycarbonates: Synthesis and rapid thermo‐responsive behavior

Common CO₂‐based biodegradable polycarbonates like poly(propylene carbonate) or poly(cyclohexene carbonate) are generally hydrophobic, leading to slow biodegradation rate and poor cell adhesion, which limit their applications in the biomedical field. Here hydrophilic polycarbonates were prepared by one‐pot terpolymerization of CO₂, propylene oxide (PO), and 2‐((2‐(2‐(2‐methoxyethoxy)ethoxy)ethoxy)methyl)oxirane (ME₃MO) using binary Salen Co(III)‐Cl/PPNCl catalyst system. The resultant terpolymers showed one glass transition temperature (T_g), which decreased with the increase of ME₃MO units in the terpolymers (F_ME3MO). Water contact angles of the resultant terpolymers with F_ME3MO of 4.2?23.6% were 68?25°, while that of poly(propylene carbonate) was 90°, indicating that the terpolymers became hydrophlilic. Furthermore, the terpolymers with F_ME3MO more than 25.8% exhibited reversible and rapid thermo‐responsive property in water, and the lower critical solution temperature (LCST) was highly sensitive to F_ME3MO. In particular, aqueous solution of the terpolymer with F_ME3MO of 72.6% showed a LCST around 35.2 °C, close to body temperature, which was promising for biomedical applications, especially for in vivo applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2834–2840.