Pentacoordinated Carboxylate π‐Allyl Nickel Complexes as Key Intermediates for the Ni‐Catalyzed Direct Amination of Allylic Alcohols

Direct amination of allylic alcohols with primary and secondary amines catalyzed by a system made of [Ni(1,5‐cyclooctadiene)₂] and 1,1′‐bis(diphenylphosphino)ferrocene was effectively enhanced by adding nBu₄NOAc and molecular sieves, affording the corresponding allyl amines in high yield with high monoallylation selectivity for primary amines and high regioselectivity for monosubstituted allylic alcohols. Such remarkable additive effects of nBu₄NOAc were elucidated by isolating and characterizing some nickel complexes, manifesting the key role of a charge neutral pentacoordinated η³‐allyl acetate complex in the present system, in contrast to usual cationic tetracoordinated complexes earlier reported in allylic substitution reactions.     

Application and Mechanistic Studies of a Water‐Oxidation Catalyst in Alcohol Oxidation by Employing Oxygen‐Transfer Reagents

By using a dimeric ruthenium complex in combination with tert‐butyl hydrogen peroxide (TBHP) as stoichiometric oxidant, a mild and efficient protocol for the oxidation of secondary benzylic alcohols was obtained, thereby giving the corresponding ketones in high yields within 4 h. However, in the oxidation of aliphatic alcohols, the TBHP protocol suffered from low conversions owing to a competing Ru‐catalyzed disproportionation of the oxidant. Gratifyingly, by switching to Oxone (2 KHSO₅ ? KHSO₄ ? K₂SO₄ triple salt) as stoichiometric oxidant, a more efficient and robust system was obtained that allowed for the oxidation of a wide range of aliphatic and benzylic secondary alcohols, giving the corresponding ketones in excellent yields. The mechanism for these reactions is believed to involve a high‐valent Ru^V–oxo species. We provide support for such an intermediate by means of mechanistic studies.     

Selective tetrahydropyranylation of alcohols and phenols using titanium(IV) salophen trifluoromethanesulfonate as an efficient catalyst

Titanium(IV) salophen trifluoromethanesulfonate, [Ti^IV(salophen)(OSO₂CF₃)₂], as a catalyst enables selective tetrahydropyranylation of alcohols and phenols with 3,4‐dihydro‐2H‐pyran. Using this catalytic system, primary, secondary and tertiary alcohols, as well as phenols, were converted to their corresponding tetrahydropyranyl ethers in high yields and short reaction times at room temperature. Investigation of the chemoselectivity of this method showed discrimination between the activity of primary alcohols in the presence of secondary and tertiary alcohols and phenols. This heterogenized catalyst could be reused several times without loss of its catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

Acridin-9-ylmethoxycarbonyl （Amoc）： A New Photochemically Removable Protecting Group for Alcohols

Synthesis and photochemistry of acridin-9-ylmethoxycarbonyl(Amoc)as a new photochemically removableprotecting group for alcohols were described.Three carbonates of alcohols 1—3 were synthesized throughcondensation of 9-hydroxymethylacridine and chloroformates of alcohols,including benzyl alcohol,phenethylalcohol and one galactose derivative.The photolysis of protected alcohols can efficiently release the correspondingalcohol in the efficiencies(Q_(u1)ε)of 100—200(quantum yield Q_(u1)=0.011—0.023,and molar absorptivity ε=9.1×10~3—9.8×10~3 mol~(-1)·L·cm~(-1))under 360 nm light.     

Graphene oxide‐bound electron‐deficient tin(IV) porphyrin: a highly efficient and selective catalyst for trimethylsilylation of alcohols and phenols with hexamethyldisilazane

The catalytic activity of graphene oxide‐bound tetrakis(p ‐aminophenyl)porphyrinatotin(IV) trifluoromethanesulfonate, [Sn^IV(TNH₂PP)(OTf)₂], in the trimethylsilylation of alcohols and phenols with hexamethyldisilazane (HMDS) is reported. The prepared catalyst was characterized using inductively coupled plasma analysis, scanning electron microscopy, transmission electron microscopy, and Fourier transform infrared and diffuse reflectance UV–visible spectroscopies. This heterogeneous catalyst was used for selective trimethylsilylation of various alcohols and phenols with HMDS in short reaction times and high yields. Also, the catalyst is of high reusability and stability, in that it was recovered several times without loss of its initial activity. The chemoselectivity of this catalytic system in the silylation of primary alcohols in the presence of secondary and tertiary alcohols and also phenols was investigated.     

Size Selectivity of a Copper Metal–Organic Framework and Origin of Catalytic Activity in Epoxide Alcoholysis

{Cu(bpy)(H₂O)₂(BF₄)₂(bpy)} (Cu‐MOF; MOF=metal–organic framework; bpy=4,4′‐bipyridine), with a 3D‐interpenetrated structure and saturated Cu coordination sites in the framework, possesses unexpectedly high activity in the ring‐opening reaction of epoxides with MeOH, although the reaction rate drops remarkably with more bulky alcohols. This (apparent) size selection and the single Cu²⁺ sites in an identical environment of the crystalline matrix resemble zeolites. The real nature of active sites was investigated by attenuated total reflection infrared (ATR‐IR), Raman, EPR, and UV/Vis spectroscopies. Cu‐MOF has highly dynamic structural properties that respond to MeOH; its framework dimensions change from 3D to 2D by restructuring to a symmetric coordination of four bpy units to Cu. This interaction is accompanied by the partial dissolution of Cu‐MOF as multi‐Cu clusters, in which Cu²⁺ ions are connected with bpy ligands. Although both molecular and surface catalysis contribute to the high rate of alcoholysis, the soluble oligomeric species (Cu_mbpy_n) are far more active. Finally, addition of diethyl ether to the reaction mixture induces the reconstruction of dissolved and solid Cu‐MOF to the original framework structure, thereby allowing excellent recyclability of Cu‐MOF as an apparent heterogeneous catalyst. In contrast, the original Cu‐MOF structure is maintained upon contact with larger alcohols, such as iPrOH and tBuOH, thus leading to poor activity in epoxide ring opening.     

Oligonucleotide Analogues with Integrated Bases and Backbone. Part 15

The self‐complementary (Z)‐configured U*[c_e]A⁽*⁾ dinucleotide analogues 6, 8, 10, 12, 14 , and 16 , and the A*[c_e]U⁽*⁾ dimers 19, 21, 23, 25, 27 , and 29 were prepared by partial hydrogenation of the corresponding ethynylene linked dimers. Photolysis of 14 led to the (E)‐alkene 17 . These dinucleotide analogues associate in CDCl₃ solution, as evidenced by NMR and CD spectroscopy. The thermodynamic parameters of the duplexation were determined by van't Hoff analysis. The (Z)‐configured U*[c_e]A⁽*⁾ dimers 14 and 16 form cyclic duplexes connected by Watson–Crick H‐bonds, the (E)‐configured U*[c_e]A dimer 17 forms linear duplexes, and the U*[c_e]A⁽*⁾ allyl alcohols 6, 8, 10 , and 12 form mixtures of linear and cyclic duplexes. The C(6/I)‐unsubstituted A*[c_e]U allyl alcohols 19 and 23 form linear duplexes, whereas the C(6/I)‐substituted A*[c_e]U* allyl alcohols 21 and 25 , and the C(5′/I)‐deoxy A*[c_e]U⁽*⁾ dimers 27 and 29 also form minor amounts of cyclic duplexes. The influence of intra‐ and intermolecular H‐bonding of the allyl alcohols and the influence of the base sequence upon the formation of cyclic duplexes are discussed.     

Design and Synthesis of Copper–Cobalt Catalysts for the Selective Conversion of Synthesis Gas to Ethanol and Higher Alcohols

Combining quantum‐mechanical simulations and synthesis tools allows the design of highly efficient CuCo/MoO_x catalysts for the selective conversion of synthesis gas (CO+H₂) into ethanol and higher alcohols, which are of eminent interest for the production of platform chemicals from non‐petroleum feedstocks. Density functional theory calculations coupled to microkinetic models identify mixed Cu–Co alloy sites, at Co‐enriched surfaces, as ideal for the selective production of long‐chain alcohols. Accordingly, a versatile synthesis route is developed based on metal nanoparticle exsolution from a molybdate precursor compound whose crystalline structure isomorphically accommodates Cu²⁺ and Co²⁺ cations in a wide range of compositions. As revealed by energy‐dispersive X‐ray nanospectroscopy and temperature‐resolved X‐ray diffraction, superior mixing of Cu and Co species promotes formation of CuCo alloy nanocrystals after activation, leading to two orders of magnitude higher yield to high alcohols than a benchmark CuCoCr catalyst. Substantiating simulations, the yield to high alcohols is maximized in parallel to the CuCo alloy contribution, for Co‐rich surface compositions, for which Cu phase segregation is prevented.     

From the N‐Heterocyclic Carbene‐Catalyzed Conjugate Addition of Alcohols to the Controlled Polymerization of (Meth)acrylates

Among various N‐heterocyclic carbenes (NHCs) tested, only 1,3‐bis(tert‐butyl)imidazol‐2‐ylidene (NHC^tBu) proved to selectively promote the catalytic conjugate addition of alcohols onto (meth)acrylate substrates. This rather rare example of NHC‐catalyzed 1,4‐addition of alcohols was investigated as a simple means to trigger the polymerization of both methyl methacrylate and methyl acrylate (MMA and MA, respectively). Well‐defined α‐alkoxy poly(methyl (meth)acrylate) (PM(M)A) chains, the molar masses of which could be controlled by the initial [(meth)acrylate]₀/[ROH]₀ molar ratio, were ultimately obtained in N,N‐dimethylformamide at 25 °C. A hydroxyl‐terminated poly(ethylene oxide) (PEO‐OH) macro‐initiator was also employed to directly access PEO‐b‐PMMA amphiphilic block copolymers. Investigations into the reaction mechanism by DFT calculations revealed the occurrence of two competitive concerted pathways, involving either the activation of the alcohol or that of the monomer by NHC^tBu.     

Alcohol Oxidations Using Reduced Polyoxovanadates

A full account of our recently communicated room temperature alcohol oxidation using reduced polyoxovanadates (r‐POV s) is presented. Extensive optimizations revealed optimal conditions employing 0.02 equiv. of r‐POV catalyst Cs₅(V₁₄As₈O₄₂Cl), 5 equiv. tert‐butyl hydrogen peroxide (^t BuOOH ) as the terminal co‐oxidant, in an acetone solvent for the quantitative oxidation of aryl‐substituted secondary alcohols to their ketone products. The substrate scope tolerates most aryl substituted secondary alcohols in good to quantitative yields while alkyl secondary and primary activated alcohols were sluggish in comparison under similar conditions. Catalyst recyclability was successful on a 1.0 mmol scale of starting alcohol 1‐phenylethanol. The oxidation was also successfully promoted by the V^IV /V^V mixed valent polyoxovanadate (POV ) Cs₁₁Na₃Cl₅(V₁₅O₃₆Cl). Finally, a third POV , Cs_2.64(V₅O₉)(AsO₄)₂, was investigated for catalytic activity using our established reaction protocol, but proved ineffective as compared to the other two r‐POV catalysts. This study expands the field of POM ‐mediated alcohol oxidations to include underexplored r‐POV catalysts. While our catalysts do not supplant the best catalysts known for the transformation, their study may inform the development of other novel oxidative transformations mediated by r‐POV s.     

Measuring the Relative Hydrogen‐Bonding Strengths of Alcohols in Aprotic Organic Solvents

Voltammetric experiments with 9,10‐anthraquinone and 1,4‐benzoquinone performed under controlled moisture conditions indicate that the hydrogen‐bond strengths of alcohols in aprotic organic solvents can be differentiated by the electrochemical parameter ΔE_p^red=|E_p^red(1)?E_p^red(2)|, which is the potential separation between the two one‐electron reduction processes. This electrochemical parameter is inversely related to the strength of the interactions and can be used to differentiate between primary, secondary, tertiary alcohols, and even diols, as it is sensitive to both their steric and electronic properties. The results are highly reproducible across two solvents with substantially different hydrogen‐bonding properties (CH₃CN and CH₂Cl₂) and are supported by density functional theory calculations. This indicates that the numerous solvent–alcohol interactions are less significant than the quinone–alcohol hydrogen‐bonding interactions. The utility of ΔE_p^red was illustrated by comparisons between 1) 3,3,3‐trifluoro‐n‐propanol and 1,3‐difluoroisopropanol and 2) ethylene glycol and 2,2,2‐trifluoroethanol.     

A Rigidoporus Vinctus Alcohol Dehydrogenase and Its Characterization

Alcohol dehydrogenases (ADHs; E.C. 1.1.1.1) are widely distributed enzymes found in many microorganisms. ADHs are oxidoreductases that catalyze the NAD(P)⁺‐dependent conversion of alcohols to aldehydes or ketones as well as the reverse reaction. The ADH cloned from Rigidoporus vinctus (RvADH) was 1035 bp that encodes a protein of 344 amino acid residues with calculated molecular mass of 38.39 kDa. This ADH is belonging to the medium‐chain family (medium‐chain dehydrogenase/reductase (MDR) and has the highly conserved GXXGXXG sequence found in the MDR family which found as the coenzyme‐binding pocket. To characterize the ADH protein, the coding region was subcloned into an expression vector pET‐20b(+) and transformed into E. coli Rosetta (DE3). The recombinant His6‐tagged ADH was overexpressed and purified by Ni²⁺‐nitrilotriacetic acid Sepharose. The purified enzyme showed one band on 12 % sodium dodecyl sulfate‐polyacrylamide gel electrophoresis. The Michaelis constant (K_M) value of the recombinant enzyme for ethanol was 0.79 mM. In substrates specificity analysis showed that RvADH had great oxidative activity toward primary alcohols. However, the less activtiy toward secondary alcohols and alcohol derivatives were compared with ethanol. Regarding the reductase activity showed low or even no activity to aldehydes and ketone.     

Efficient asymmetric addition of diethylzinc to aldehydes using C2‐novel chiral pyridine β‐amino alcohols as chiral ligands

A series of novel C₂‐symmetric chiral pyridine β‐amino alcohol ligands have been synthesized from 2,6‐pyridine dicarboxaldehyde, m‐phthalaldehyde and chiral β‐amino alcohols through a two‐step reaction. All their structures were characterized by ¹H NMR, ¹³C NMR and IR. Their enantioselective induction behaviors were examined under different conditions such as the structure of the ligands, reaction temperature, solvent, reaction time and catalytic amount. The results show that the corresponding chiral secondary alcohols can be obtained with high yields and moderate to good enantiomeric excess. The best result, up to 89% ee, was obtained when the ligand 3c (2S,2′R)‐2,2′‐((pyridine‐2,6‐diylbis(methylene))bisazanediyl))bis(4‐methyl‐1,1‐diphenylpentan‐1‐ol) was used in toluene at room temperature. The ligand 3g (2S,2′R)‐2,2′‐((1,3‐phenylenebis(methylene))bis(azanediyl))bis(4‐methyl‐1,1‐diphenylpentan‐1‐ol) was prepared in which the pyridine ring was replaced by the benzene ring compared to 3c in order to illustrate the unique role of the N atom in the pyridine ring in the inductive reaction. The results indicate that the coordination of the N atom of the pyridine ring is essential in the asymmetric induction reaction. Copyright © 2014 John Wiley & Sons, Ltd.     

A Robust Porous Metal–Organic Framework with a New Topology That Demonstrates Pronounced Porosity and High‐Efficiency Sorption/Selectivity Properties of Small Molecules

A robust porous metal–organic framework (MOF), [Co₃(ndc)(HCOO)₃(μ₃‐OH)(H₂O)]_n ( 1 ) (H₂ndc=5‐(4‐pyridyl)‐isophthalic acid), was synthesized with pronounced porosity. MOF 1 contained two different types of nanotubular channels, which exhibited a new topology with the Schlafli symbol of {4².6⁵.8³}{4².6}. MOF 1 showed high‐efficiency for the selective sorption of small molecules, including the energy‐correlated gases of H₂, CH₄, and CO₂, and environment‐correlated steams of alcohols, acetone, and pyridine. Gas‐sorption experiments indicated that MOF 1 exhibited not only a high CO₂‐uptake (25.1 wt % at 273 K/1 bar) but also the impressive selective sorption of CO₂ over N₂ and CH₄. High H₂‐uptake (2.04 wt % at 77 K/1 bar) was also observed. Moreover, systematic studies on the sorption of steams of organic molecules displayed excellent capacity for the sorption of the homologous series of alcohols (C₁–C₅), acetone, pyridine, as well as water.     

Manganese(I)‐Catalyzed β‐Methylation of Alcohols Using Methanol as C1 Source

Highly selective β‐methylation of alcohols was achieved using an earth‐abundant first row transition metal in the air stable molecular manganese complex [Mn(CO)₂Br[HN(C₂H₄PⁱPr₂)₂]] 1 ([HN(C₂H₄PⁱPr₂)₂]=MACHO‐ⁱPr). The reaction requires only low loadings of 1 (0.5 mol %), methanolate as base and MeOH as methylation reagent as well as solvent. Various alcohols were β‐methylated with very good selectivity (>99 %) and excellent yield (up to 94 %). Biomass derived aliphatic alcohols and diols were also selectively methylated on the β‐position, opening a pathway to “biohybrid” molecules constructed entirely from non‐fossil carbon. Mechanistic studies indicate that the reaction proceeds through a borrowing hydrogen pathway involving metal–ligand cooperation at the Mn‐pincer complex. This transformation provides a convenient, economical, and environmentally benign pathway for the selective C?C bond formation with potential applications for the preparation of advanced biofuels, fine chemicals, and biologically active molecules     

Well‐defined epoxide‐containing styrenic polymers and their functionalization with alcohols

Polymers containing electrophilic moieties, such as activated esters, epoxides, and alkyl halides, can be readily modified with a variety of nucleophiles to produce useful functional materials. The modification of epoxide‐containing polymers with amines and other strong nucleophiles is well‐documented, but there are no reports on the modification of such polymers with alcohols. Using phenyloxirane and glycidyl butyrate as low molecular weight model compounds, it was determined that the acid‐catalyzed ring‐opening of aryl‐substituted epoxides by alcohols to form β‐hydroxy ether products was significantly more efficient than that of alkyl‐substituted epoxides. An aryl epoxide‐type styrenic monomer, 4‐vinylphenyloxirane (4VPO), was synthesized in high yield using an improved procedure and then polymerized in a controlled manner under reversible addition‐fragmentation chain‐transfer (RAFT) polymerization conditions. A successful chain extension with styrene proved the high degree of chain‐end functionalization of the poly4VPO‐based macro chain transfer agent. Poly4VPO was modified with a library of alcohols and phenols, some of which contained reactive functionalities, e.g., azide, alkyne, allyl, etc., using either CBr₄ (in PhCN at 90 °C for 2–3 days) or BF₃ (in CH₂Cl₂ at ambient temperature over 30 min) as the catalyst. The resulting β‐hydroxy ether‐functionalized homopolymers were characterized using size exclusion chromatography, ¹H NMR and IR spectroscopy, and thermal gravimetric analysis. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1132–1144     

Highly Stereoselective Synthesis of Phenylseleno- and p-Tolylsulfonyl Substituted 1,3-Dienes from Functionalized Allyl Alcohols

Introduction Heteroatom-substituted 1,3-dienes have been exten-sively studied because of their marked abilities to con-struct highly functionalized ring systems in cycloaddi-tions.1 For example, Danishefsky2 developed 1-methoxy-3-trimethyl-siloxy-buta-1,3-diene which has led to many creative applications in complex organic synthesis. Padwa et al.3 demonstrated that 1,3- and 2, 3-bis(phenyl-sulfonyl)-1,3-butadienes are versatile building blocks in organic synthesis via reactions such as [4+2]-c…     

Catalytic activity of nickel(II), copper(II) and oxovanadium(II)‐dihydroindolone complexes towards homogeneous oxidation reactions

Three novel paramagnetic metal complexes (MH₂ID) of Ni²⁺, Cu²⁺ and VO²⁺ ions with 3‐hydroxy‐3,3’‐biindoline‐2,2’‐dione (dihydroindolone, H₄ID) were synthesized and characterized by different spectroscopic methods. The ligand (H₄ID) was synthesized via homocoupling reaction of isatin in presence of phenylalanine in methanol. Complexation of low valent Ni²⁺, Cu²⁺ ions and high valent VO²⁺ ions with H₄ID carried out in 1: 2 molar ratios. A comparison in the catalytic potential of paramagnetic complexes of low and high valent metal ion was explored in the oxidation processes of cis‐cyclooctene, benzyl alcohol and thiophene by an aqueous H₂O₂, as a green terminal oxidant, in the presence and absence of acetonitrile, as an organic solvent, at 85 °C. NiH₂ID, CuH₂ID and VOH₂ID show good catalytic activity, i.e. good chemo‐ and regioselectivity. VOH₂ID has the highest catalytic potential compared to both Ni²⁺‐ and Cu²⁺‐species in the same homogenous aerobic atmosphere. Catalytic oxidation of other alkenes and alcohols was also studied using NiH₂ID, CuH₂ID or VOH₂ID as a pre‐catalyst by an aqueous H₂O₂. A mechanistic pathway for those oxidation processes was proposed.     

The “Borrowing Hydrogen Strategy” by Supported Ruthenium Hydroxide Catalysts: Synthetic Scope of Symmetrically and Unsymmetrically Substituted Amines

The N‐alkylation of ammonia (or its surrogates, such as urea, NH₄HCO₃, and (NH₄)₂CO₃) and amines with alcohols, including primary and secondary alcohols, was efficiently promoted under anaerobic conditions by the easily prepared and inexpensive supported ruthenium hydroxide catalyst Ru(OH)_x/TiO₂. Various types of symmetrically and unsymmetrically substituted “tertiary” amines could be synthesized by the N‐alkylation of ammonia (or its surrogates) and amines with “primary” alcohols. On the other hand, the N‐alkylation of ammonia surrogates (i.e., urea and NH₄HCO₃) with “secondary” alcohols selectively produced the corresponding symmetrically substituted “secondary” amines, even in the presence of excess amounts of alcohols, which is likely due to the steric hindrance of the secondary alcohols and/or secondary amines produced. Under aerobic conditions, nitriles could be synthesized directly from alcohols and ammonia surrogates. The observed catalysis for the present N‐alkylation reactions was intrinsically heterogeneous, and the retrieved catalyst could be reused without any significant loss of catalytic performance. The present catalytic transformation would proceed through consecutive N‐alkylation reactions, in which alcohols act as alkylating reagents. On the basis of deuterium‐labeling experiments, the formation of the ruthenium dihydride species is suggested during the N‐alkylation reactions.     

Rate coefficients for the gas‐phase reactions of OH radicals with methylbutenols at 298 K

The relative‐rate method has been used to determine the rate coefficients for the reactions of OH radicals with three C₅ biogenic alcohols, 2‐methyl‐3‐buten‐2‐ol (k₁), 3‐methyl‐3‐buten‐1‐ol (k₂), and 3‐methyl‐2‐buten‐1‐ol (k₃), in the gas phase. OH radicals were produced by the photolysis of CH₃ONO in the presence of NO. Di‐n‐butyl ether and propene were used as the reference compounds. The absolute rate coefficients obtained with the two reference compounds agreed well with each other. The O₃ and O‐atom reactions with the target alcohols were confirmed to have a negligible contribution to their total losses by using two kinds of light sources with different relative rates of CH₃ONO and NO₂ photolysis. The absolute rate coefficients were obtained as the weighted mean values for the two reference compound systems and were k₁ = (6.6 ± 0.5) × 10^?11, k₂ = (9.7 ± 0.7) × 10^?11, and k₃ = (1.5 ± 0.1) × 10^?10 cm³ molecule^?1 s^?1 at 298 ± 2 K and 760 torr of air. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 379–385 2004