首页 | 官方网站   微博 | 高级检索  
     

基于时域BLT的多导体传输线串扰响应分析
引用本文:叶志红,廖成,张敏,冯菊.基于时域BLT的多导体传输线串扰响应分析[J].强激光与粒子束,2014,26(7):073212.
作者姓名:叶志红  廖成  张敏  冯菊
作者单位:1.西南交通大学 电磁场与微波技术研究所, 成都 61 0031
基金项目:国家自然科学基金重点项目(61231003); 高等学校博士学科点专项科研基金项目(20120184110013)
摘    要:当传输线上通有电压和电流信号时,会在其周围的传输线上产生串扰响应。采用时域BLT方程建立多导体传输线对多导体传输线的串扰模型,分析了不同数目和不同频率正弦波集总电压源激励下的多导体受扰线终端负载串扰电压响应特性。研究结果表明,受扰线终端负载上的串扰电压响应主要频点的个数与集总电压源的个数相同,响应频点与集总电压源的频率相等,响应幅值与相应电压源离受扰线的间距有关。

关 键 词:复杂电磁环境    BLT方程    多导体传输线    串扰电压频谱
收稿时间:2013/10/17

Analysis of crosstalk responses of multi-conductor transmission lines based on time domain BLT equation
Affiliation:1.Institute of Electromagnetics,Southwest Jiaotong University,Chengdu 610031,China
Abstract:When voltage and current signals transmit on transmission lines, it can produce crosstalk responses on the other transmission lines. In this paper, the time domain BLT equation is used to set up the crosstalk model of multi-conductor transmission lines to multi-conductor transmission lines, and analyze the crosstalk voltage responses on the terminal loads of victim lines excited by different number of sine wave sources at different frequencies. The research results show that the number of main frequency of crosstalk voltage responses on terminal loads of victim lines is equal to the number of lumped voltage sources. The frequencies of crosstalk voltage responses are same with those of lumped voltage sources. The amplitudes of crosstalk voltage responses are concerned with the distance between lumped voltage sources and victim transmission lines.
Keywords:complex electromagnetic environment  BLT equation  multi-conductor transmission lines  frequency spectrum of crosstalk voltage response
本文献已被 CNKI 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号