| 中国散裂中子源准直控制网数据处理方法 |
| |
| 引用本文： | 王铜,董岚,梁静,马娜,柯志勇,何振强,罗涛,门玲鸰,闫路平,韩圆颖,卢尚,张露彦,闫皓月,刘晓阳.中国散裂中子源准直控制网数据处理方法[J].强激光与粒子束,2021,33(10):104002-1-104002-5. |
| |
| 作者姓名： | 王铜 董岚 梁静 马娜 柯志勇 何振强 罗涛 门玲鸰 闫路平 韩圆颖 卢尚 张露彦 闫皓月 刘晓阳 |
| |
| 作者单位： | 1.中国科学院 高能物理研究所，北京 100049 |
| |
| 基金项目： | 国家自然科学基金项目（12075264） |
| |
| 摘 要： | 以中国散裂中子源CSNS的直线加速器控制网为例，对其数据处理方法进行研究，采用平面与高程二维平差以及三维定向平差两种方式对准直控制网进行处理分析。同时，为了使准直数据处理更加简易便利，提出利用激光跟踪仪的测量软件SA实现三维定向平差的方法。通过不同软件及不同数据处理方法的对比，验证准直控制网数据处理的正确性，最终200 m长直线控制网点位精度优于0.2 mm，这为准直控制网的数据处理提供了指导。
|
| 关 键 词： | 粒子加速器准直 激光跟踪仪 控制网 平差处理 精度分析 |
| 收稿时间： | 2021-03-20 |
Adjustment method of control network for alignment in CSNS |
| |
| Affiliation: | 1.Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China2.Spallation Neutron Source Science Center, Dongguan 523803, China3.Institute of Microelectronics, Chinese Academy of Sciences, Beijing 100029, China4.University of Chinese Academy of Sciences, Beijing 100049, China |
| |
| Abstract: | Control network is the reference of equipment installation and alignment, so the adjustment processing of control network is very important. In this paper, the data processing methods of separate plane and elevation adjustment and three-dimensional adjustment were studied in LINAC of China Spallation Neutron Source. Meanwhile, to make the data processing more simple and convenient, SA software was introduced to realize three-dimensional adjustment with the gravity orientation constrained. Through the comparison of different software and different data processing methods, correctness of the data processing of the control network is verified. Finally, the accuracy of the 200 m linear control network was better than 0.2 mm, which provides guidance for data processing of control network for alignment. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 |
|
点击此处可从《强激光与粒子束》下载全文 |
|
