| Abstract: | Polyaniline–oxalic acid salts were prepared at 5 and 30°C by chemical polymerization of aniline using different concentration of oxalic acid. Polyaniline base was obtained from the corresponding polyaniline salt by dedoping using aqueous ammonium hydroxide solution. Conductivity measurements, elemental analysis, Infrared, electronic absorption, electron paramagnetic resonance spectral, and thermogravimetric analysis were performed on the polyaniline salts and bases. Composition and the extent of dopant in polyaniline salt systems where determined. The value of composition of polyaniline: oxalic acid is 4: 1.6 and the polymer yield is around 66%. The value of conductivity, polymer yield and composition of polyaniline–oxalic acid salt is independent of concentration of oxalic acid used and also the synthesis temperature. The results are compared with polyaniline–hydrochloride salt prepared by chemical polymerization. The conductivity of polyaniline–oxalic acid salt is three orders of magnitude lower than that of polyaniline-hydrocholoride salt. © 1995 John Wiley & Sons, Inc. |
