| Abstract: | Butyl rubber (polyisobutylene-co-isoprene) mixed with polyisobutylene was crosslinked to yield elastomeric macromolecular networks containing dissolved linear macromolecules. Adhesion of these materials to themselves (self-adhesion) and to an inert substrate was investigated over a wide range of peel rates and test temperatures. Greatly enhanced self-adhesion was found when linear polyisobutylene molecules of high molecular weight were present, but the strength of adhesion to a rigid inert substrate was hardly affected. The enhancement of self-adhesion is attributed to interdiffusion of polyisobutylene molecules. It was greatest at intermediate peel rates and temperatures, becoming insignificant at extremely low rates, probably because the diffusing species can then migrate readily, and at high effective rates of peel when the polymer approaches the glassy state and the strength of adhesion is high in all cases. A transition to somewhat lower levels of adhesion at relatively high rates of peel is tentatively ascribed to the onset of molecular fracture in place of pullout. The presence of large amounts of low-molecular-weight polyisobutylene (M?v = 50,000 g/mol) increased the level of self-adhesion and of adhesion to an inert substrate to a similar degree, over a broad range of peel rates. This effect is attributed primarily to enhanced viscous losses in the elastomeric layer during separation. Application of these results to crack and weld-line healing in glassy plastics is discussed. |
