Convection regimes and heat transfer characteristics along a continuously moving heated vertical plate

The steady laminar flow and thermal characteristics of a continuously moving vertical sheet of extruded material are studied close to and far downstream from the extrusion slot. The velocity and temperature variations, obtained by a finite volume method, are used to map out the entire forced, mixed and natural convection regimes. The effects of the Prandtl number (Pr) and the buoyancy force parameter (B) on the friction and heat transfer coefficients are investigated. Comparisons with experimental measurements and solutions by others in the pure forced and pure natural convection regions are made. In the mixed convection region, the results are compared with available finite-difference solutions of the boundary layer equations showing excellent agreement. The region close to the extrusion slot is characterized as a non-similar forced-convection dominated region in which Nu_xRe_x^−1/2 drops sharply with increasing Richardson number (Ri_x). This is followed by a self-similar forced-convection dominated region in which Nu_xRe_x^−1/2 levels off with increasing Ri_x until the buoyancy effect sets in. The existence and extent of the latter region depend upon the value of B. A non-similar mixed convection region where increasing buoyancy effect enhances the heat transfer rate follows. Finally, this region is followed downstream by a self-similar natural-convection dominated region in which Nu_xRe_x^−1/2 approaches the pure natural convection asymptote at large Ri_x. Critical values of Ri_x to distinguish the various convection regimes are determined for different Pr and B.