Beam and phase effects in angle-beam-through-transmission method of ultrasonic velocity measurement

The accuracy of a plane wave approximation for phase velocity measurements in isotropic and anisotropic material using the angle-beam-through-transmission method has been investigated numerically and experimentally. In this method the velocity is measured in different propagation directions as a function of incidence angle. The effect of two factors on the measurement accuracy have been discussed: intrinsic phase shift of the transmitted signal through a fluid-solid interface and beam diffraction due to the finite beam size of receiver and transmitter. It is shown that the interface-induced phase shift can introduce an error in time delay measurements of the shear wave after the first critical angle and that this time delay error can be accurately corrected for. Numerical results obtained by a time-domain beam model show that except at the critical angles, the finite width of the transmitter and receiver only affects the amplitudes of the transmitted signals and has almost no effect on the measured zero-cross time delay; therefore the plane wave approximation for obtaining phase velocity from the measured time delay data by this method and the plane wave interface-induced phase correction are fully applicable.