A study of 1O2 production by immobilized sensitizer outside the solution. Measurement of 1O2 generation

Abstract— Recently, a new technique of ¹O₂ generation has been described by Midden and Wang. The sensitizer is immobilized on silica gel particles which are attached on one surface of a glass plate which is placed, sensitizer-side down, above a solution leaving a small air space between the sensitizer and the solution. Applying the principle of the technique, i.e. generation of ¹O₂ in the gas phase above the solution, we first improved the long-term stability of the dye (rose bengal) by using double stock transparent tape instead of rubber cement. Under these conditions, although the initial rate of production was higher in rubber cement, the rate of production reached a plateau after 30 min, whereas with double stick transparent tape, the rate of generation was linear up to 100 min. This result was explained by the fact that silica glass beads are embedded in the cement which could lead to the bleaching reaction of the dye. Different reactions have been investigated, the bleaching of N,N-dimethyl-4-nitrosoaniline (RNO) in the presence of imidazole, destruction of anthracenedipropionic acid, formation of a stable nitroxide from a sterically hindered secondary amine and the influence of pH on the nitroxide yield. The yield was measured to be 5 × 10¹² molecules of singlet oxygen produced per second per cm² from the surface of the plate using the RNO bleaching reaction. This method of generating ¹O₂ also seems promising for studying the killing of mammalian cells by ¹O₂ as the sole damaging species.