Fixation of a cholesteric helical structure by the photopolymerization of a cholesteryl derived monomer

A cholesteryl derived monomer was synthesized according to a conventional synthetic route; it exhibits a cholesteric phase above 129°C, and shows a red colour due to selective reflection in the cholesteric phase. Photopolymerization of the monomer was carried out at 135°C in the cholesteric phase. The helical structure of the cholesteric phase of the monomer was frozen by photopolymerization. A peak based on the selective reflection of the cholesteric phase was detected at 615 nm in the transmittance UV-Vis spectrum. Mixtures of the monomer with a binaphthyl derivative were prepared to control the selective reflection wavelength; they all also exhibited a cholesteric phase. The selective reflection wavelength of the mixture was dependent upon the ratio of the binaphthyl derivative in the mixture. This wavelength became shorter with increasing ratio of the binaphthyl derivative. The polymer films obtained by photopolymerization displayed almost the same selective reflection wavelength as the corresponding mixtures before photopolymerization. The selective reflection wavelength of the polymer films did not change up to about 250°C.