首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于Multisim的4种典型功放电路仿真研究
引用本文:王晓明,张向龙,拜润卿.基于Multisim的4种典型功放电路仿真研究[J].电子设计工程,2014(11):67-70.
作者姓名:王晓明  张向龙  拜润卿
作者单位:[1]兰州理工大学电气工程与信息工程学院,甘肃兰州730050 [2]甘肃省电力科学研究院,甘肃兰州730050
基金项目:甘肃省自然科学基金(1010RJZA040);甘肃省科技支撑计划一工业类项目(1011GKCA031)
摘    要:为了准确直观的理解4种典型功率放大电路的电路特性,文中研究了基于Multisim的功率放大电路的仿真测试。首先介绍了Multisim软件常用的分析方法。其次通过Multisim平台建立了4种功放电路的仿真模型,对其进行了瞬态分析和傅里叶分析。仿真结果表明,在基本型功放电路前端串接运算放大器可以提高电路稳定性,减小电路的交越失真。

关 键 词:Multisim  功放电路  瞬态分析  傅里叶分析

The simulation study of four typical amplifier circuits based on Multisim
WANG Xiao-ming,ZHANG Xiang-long,BAI Run-qing.The simulation study of four typical amplifier circuits based on Multisim[J].Electronic Design Engineering,2014(11):67-70.
Authors:WANG Xiao-ming  ZHANG Xiang-long  BAI Run-qing
Institution:1.Electrical Engineering and Information Engineering Institute, Lanzhou University of Technology Lanzhou 730050, China;2.Gansu Electric Power Research Institute, Lanzhou 730050, China )
Abstract:In order to accurately intuitively understand the circuit features of the four typical power amplifier circuits, this paper studies the simulation test of power amplifier circuit based on Multisim. Firstly ,it introduces commonly used analysis method about Multisim software. Secondly, simulation model of the four power amplifier circuits is established by Multisim platform, transient analysis and Fourier analysis are proceeded . The simulation results show that series- connecting an op-amp in the front of the basic amplifier circuit can improve the stability of the circuit and reduce the distortion of the the circuit.
Keywords:multisim  power amplifier circuits  transient analysis  fourier analysis
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号