| 基于SolidWorks和GearTrax的蜗轮蜗杆三维建模及运动仿真 |
| |
| 引用本文： | 谢志平.基于SolidWorks和GearTrax的蜗轮蜗杆三维建模及运动仿真[J].贵州师范大学学报(自然科学版),2012,30(2):103-105. |
| |
| 作者姓名： | 谢志平 |
| |
| 作者单位： | 贵州师范大学机械与电气工程学院,贵州贵阳,550001 |
| |
| 基金项目： | 基金项目:贵州省科学技术基金资助项目 |
| |
| 摘 要： | 运用SolidWorks和GearTrax软件构建蜗轮蜗杆机构简化模型，按照机构的结构几何尺寸，进行虚拟装配。直接在运动仿真模块Cosmosmotion中通过设定原动件运动参数进行运动仿真，并检查零件之间的干涉、分析运动状态。结果表明，利用SotidWorks和GearTrax软件可以对蜗杆机构实现三维实体快速建模，其运动特性与理论分析结果一致，验证了机构设计的合理性。
|
| 关 键 词： | SolidWorks GearTrax 蜗轮蜗杆 运动仿真 |
The 3D design and simulation of Worm Wheel-worm based on SolidWorks and GearTrax |
| |
| XIE Zhi-ping.The 3D design and simulation of Worm Wheel-worm based on SolidWorks and GearTrax[J].Journal of Guizhou Normal University(Natural Sciences),2012,30(2):103-105. |
| |
| Authors: | XIE Zhi-ping |
| |
| Institution: | XIE Zhi-ping(School of Mechanical and Electrical Engineering,Guizhou Normal University,Guiyang,Guizhou 550001,China) |
| |
| Abstract: | The software of SolidWorks and GearTrax were used to model a simplified Worm Wheel-worm,and the virtual assembly was accomplished according to geometry size.The intervene of the component parts was checked,the movement state was analyzed by simulating Worm Wheel-worm based on Cosmosmotion.It is proved that the method that set up a 3D model of Worm Wheel-worm by using the software of SolidWorks and GearTrax can enhance the work efficiency,the reasonable of the mechanism design was verified that motion characteristics were consistent with the theoretical analysis. |
| |
| Keywords: | SolidWorks GearTrax worm wheel-worm simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
