Beam-cooling methods in the NICA project

The Nuclotron-based Ion Collider Facility (NICA) is a new accelerator complex under construction at the Joint Institute for Nuclear Research (JINR) for experiments with colliding beams of heavy ions up to gold at energies as high as 4.5 × 4.5 GeV/u aimed at studying hot and dense strongly interacting nuclear matter and searching for possible indications of the mixed phase state and critical points of phase transitions. This facility comprises an ion source of the electron-string type, a 3-MeV/u linear accelerator, a 600-MeV/u superconducting booster synchrotron (Booster), a Nuclotron (upgraded superconducting synchrotron with a maximum energy of 4.5 GeV/u for ions with the charge-to-mass ratio Z/A = 1/3), and a collider consisting of two vertically separated superconducting rings with an average luminosity of 10²⁷ cm^?2 s^?1 in an energy range over 3.0 GeV/u. Beam cooling is supposed to be used in two NICA elements, the Booster, and the collider rings. The Booster is intended for the storage of ¹⁹⁷Au³¹⁺ ions to an intensity of about 4 × 10⁹ particles; their acceleration to the energy 600 MeV/u, which is sufficient for the complete stripping of nuclei (an increase in the injection energy and the charge state of ions makes the requirements for vacuum conditions in the Nuclotron less stringent); and the formation of the necessary beam emittance using the electron cooling system. Two independent beam-cooling systems, a stochastic one and an electron one, are supposed to be used in the collider. The parameters of the cooling systems, the optimum mode of operation for the collider, and the arrangement and design of the elements of the systems are discussed.