Experimental study on the two-phase pressure drop in copper foams

Experiments were performed to study pressure drops in copper foams embedded in a rectangular copper channel. De-ionized water was used as the working fluid with mass fluxes of 30–200 kg/m² s, and inlet temperature of 40–80°C. The copper foam has the porosity of 0.88 and the pore densities of 30, 60 and 90 ppi (pores per inch). Both single-phase liquid flow and boiling two-phase flow are studied. Effects of mass fluxes, vapor mass qualities, and average pore diameters of metallic foams are investigated. It is found that friction factors for the single-phase liquid flow are mainly dependent on the Reynolds number and the average pore diameter of metallic foams. The friction factors are decreased with increases in the Reynolds numbers, and will approach 0.22 at high Reynolds numbers. For the boiling two-phase flow, two-phase pressure drops are increased with increases in the outlet vapor mass qualities, mass fluxes, and ppi values. The two-phase multiplier is increased with increases in the outlet vapor mass qualities and mass fluxes, and it is decreased with increases in the Martinelli parameter and will attain a constant value depending on the mass fluxes. The larger the mass fluxes, the larger the constant value is. An experimental correlation considering the effects of vapor mass qualities, mass fluxes, and average pore diameters of metallic foams is recommended, showing good accuracy to predict the two-phase pressure drops in metallic foams.