Tailoring the properties of polyamide thin film membrane with layered double hydroxide nanoclay for enhancement in water separation

This current paper presented a new candidate and potentially to improve the current membrane materials in water filtration process. With that, the primary materials used in this research study is layered double hydroxides (LDH) nanoclay which can be obtained from earth minerals and self-synthesized from inorganic salts were discussed thoroughly to help a better understanding of these materials. However, the current technologies of water separation were still lagging behind and ineffective especially in removal of divalent metal ions and multivalent salts. Infeasibility of reverse osmosis membrane make it not a viable option for divalent salts filtration. With that, nanofiltration (NF) membrane offered as an alternative to substitute available method. In this study, thin film nanocomposite (TFN) membranes were fabricated by incorporating layered double hydroxides (LDH) nanoclay. The LDH nanoclay with different loading ratio of 0, 0.05, 0.1, 0.15 and 0.2 were impregnated into polyamide layer on top of polysulfone substrates. The fabricated TFN were characterized in terms of physicochemical properties (SEM and FTIR) and membrane hydrophilicity (contact angle). After the addition of LDH, the morphological structures of TFN membranes were changed and the surface hydrophilicity was enhanced significantly. FESEM images displayed a typical ridge and valley morphology with nodule-like structures. As the LDH loading was increased, the contact angle decreased from 34.56° to 15.76° showing the surface hydrophilicity of membrane is improved. The separation performance of membrane was evaluated in terms of salt rejection ability by cross flow filtration system. The best performance NF membrane was found to be TFN 0.05 with high water flux and MgCl₂ rejection with values of 24.18 L/m².h and 91% respectively. This study has experimentally validated the potential of LDH materials in membrane process for improvement in water separation process.