Catalyst free rutile phase TiO2 nanorods as efficient hydrogen sensor with enhanced sensitivity and selectivity

Using a low-cost hydrothermal method, we demonstrated the fabrication of phase pure rutile phase high-density vertically aligned TiO₂ nanorods-based catalyst-free hydrogen (H₂) gas sensor. The synthesized TiO₂ nanorods on FTO are decorated with the aluminum interdigitated electrode pattern for electrical measurements. TiO₂ nanorods-based hydrogen sensor showed the optimum response of ∼53.18% at 150 ppm H₂ concentration relative to air at 100 °C. The measured response and recovery time of TiO₂ nanorods are 85 and 620 s, respectively. The TiO₂ nanorods-based H₂ gas sensor showed a relatively better response, good reproducibility, and stability at moderate temperatures, i.e., 50 and 100 °C. The electrochemical impedance measurements showed a small variation in the surface characteristics of TiO₂ nanorods before and after exposing H₂ gas. The carrier lifetime at 50 °C and 100 °C at 150 ppm are 5 μs and 3 μs, respectively. Interestingly, H₂ selectivity is also observed against H₂S, CO, and NH₃ gases, suggesting that high-density vertically aligned TiO₂ nanorods can be a good candidate for efficient hydrogen sensing at relatively low temperatures.