Quartz Crystal Microbalance Monitoring of Asphaltene Adsorption/Deposition |
| |
Authors: | Dorota Dudášová Anne Silset Johan Sjöblom |
| |
Institution: | 1. Ugelstad Laboratory, Department of Chemical Engineering , Norwegian University of Science and Technology (NTNU) , Trondheim, Norway dudasova@chemeng.ntnu.no;3. Ugelstad Laboratory, Department of Chemical Engineering , Norwegian University of Science and Technology (NTNU) , Trondheim, Norway |
| |
Abstract: | Adsorption and deposition of asphaltenes onto differently coated (hydrophilic surfaces: silica, titanium, alumina, and a noncommercial tailor‐made FeOx) quartz crystals from heptane/toluene (1∶1) and toluene solutions have been studied with the quartz crystal microbalance method with dissipation measurements (QCM‐D). The results show that the adsorbed mass is related to the solubility state of asphaltenes (aromaticity of the solvent), their origin (aggregate size in solution) and very little to the hydrophilicity of the investigated crystal. Adsorption/deposition of asphaltenes depends on their solubility. We found two cases: Either the asphaltenes are solubilized, or the asphaltenes are partly solubilized and partly precipitated. In the former case, asphaltenes are bounded very tightly to the surface and poorly for the latter. The change in solution composition due to decrease in asphaltene solvency causes formation of a variety of asphaltenes species. The results also were compared and discussed in relation to adsorption onto particles, determined with the UV depletion method. The study shows that QCM‐D method is a very useful tool to study the mechanisms and the effects of solvency of asphaltenes. We discuss and compare the different techniques. |
| |
Keywords: | Asphaltenes adsorption quartz crystal microbalance (QCM‐D) hydrophilic surface aggregation flocculation |
|
|