首页 | 本学科首页   官方微博 | 高级检索  
     检索      

La2O3对钛合金表面镍基喷焊涂层组织和性能的影响
引用本文:王宏宇,许晓静,陈康敏,张雪峰,刘曦.La2O3对钛合金表面镍基喷焊涂层组织和性能的影响[J].中国稀土学报,2005,23(3):339-344.
作者姓名:王宏宇  许晓静  陈康敏  张雪峰  刘曦
作者单位:江苏大学先进成形技术研究所,江苏,镇江,212013
基金项目:江苏大学高级人才基金资助项目 (1283000007)
摘    要:采用火焰喷焊技术在钛合金基体上制备了不加La2O3和加4%(质量分数)La2O3两种镍基涂层,分析了它们的显微组织、合金元素的扩散、显微硬度以及耐磨性能。结果表明:La2O3的加人,改善了涂层合金的流动性和显微组织的均匀性,并使涂层与基体的熔合更加明显,结合性能得到进一步提高;虽然一定程度上减弱了基体Ti元素对喷焊层的强化作用,使表层显微硬度略有下降,但磨损失重却较未加La2O3的喷焊涂层下降了20%。

关 键 词:La2O3  火焰喷焊  钛合金  显微组织  性能  稀土
文章编号:1000-4343(2005)03-0339-06

Effect of La2O3 on Microstructure and Properties of Ni-Based Spray-Welding Coating on Titanium Alloys Substrate
Wang Hongyu,XU Xiaojing,Chen Kangmin,Zhang Xuefeng,Liu Xi.Effect of La2O3 on Microstructure and Properties of Ni-Based Spray-Welding Coating on Titanium Alloys Substrate[J].Journal of the Chinese Rare Earth Society,2005,23(3):339-344.
Authors:Wang Hongyu  XU Xiaojing  Chen Kangmin  Zhang Xuefeng  Liu Xi
Institution:Wang Hongyu,Xu Xiaojing*,Chen Kangmin,Zhang Xuefeng,Liu Xi
Abstract:Two kinds of Ni-base coatings with 0% and 4% La2O3 addition respectively on titanium alloys substrate made by flames spray-welding technique were prepared, and their microstructure, elemental distribution, micro-hardness and tribological properties under dry sliding against steel were studied. The results show that the fluidity of the coating alloys and the uniformity of the microstructure can be improved by adding La2O3, and the fusion between coating and substrate is formed easily, which increases their bonding. The wearing value of the coating with 4% La2O3 is declined by 20% compared with that of the coating without La2O3, although the strengthening of titanium element to spray-welding layer is decreased by adding La2O3, by which the micro-hardness of the surface is reduced.
Keywords:La2O3  flames spray-welding  titanium alloys  microstructure  properties  rare earths
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号