| 气门顶杆热挤压模具的寿命分析 |
| |
| 引用本文： | 郑金桥,张彦敏,孙爱学.气门顶杆热挤压模具的寿命分析[J].河南科技大学学报(自然科学版),2000,21(4):22-26. |
| |
| 作者姓名： | 郑金桥 张彦敏 孙爱学 |
| |
| 作者单位： | 洛阳工学院,材料工程系,河南,洛阳,471039 |
| |
| 摘 要： | 分析了气门顶杆热挤压工艺及模具失效形式 ,电镜观察显示犁削磨损和热疲劳龟裂形成剥落坑是模具失效的主要原因。为此分别采用高速钢、基体钢和钢结硬质合金作为凹模镶块材料进行生产试验 ,结果证明钢结硬质合金镶块模具的使用寿命明显高于其它模具钢 ,能满足实际生产要求 ,但高温润滑仍是亟待解决的问题。
|
| 关 键 词： | 硬质合金 挤压模 热疲劳 模具寿命 |
| 修稿时间： | 2000－05－29 |
Life Analysis of Hot Extrusion Die for Valve Stem |
| |
| ZHENG Jin-Qiao,ZHANG Yan-Min,SUN Ai-Xue.Life Analysis of Hot Extrusion Die for Valve Stem[J].Journal of Henan University of Science & Technology:Natural Science,2000,21(4):22-26. |
| |
| Authors: | ZHENG Jin-Qiao ZHANG Yan-Min SUN Ai-Xue |
| |
| Abstract: | In this paper,the hot extrusion processes of valve stems and the inactive ways of the die are analyzed.Through SEM observation,it was found out that the reason of the die's failure is mainly due to groove wears and spalling cavities caused by thermal fatigue cracks.So, high speed steel,matrix steel and carbide steel sintered alloy are used as insert materials for hot extrusion die separately,and it has been proved that carbide steel sintered alloy is the most suitable.However,the lubrication at elevated temperature for the die will be a problem to be resolved in a hurry. |
| |
| Keywords: | Cemented carbides Extrusion dies Thermal fatigue Die lifex |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
