首页 | 本学科首页   官方微博 | 高级检索  
     

Er3+、In3+等金属离子对多孔硅光致发光性质的影响
引用本文:黄明举,徐国定,张兴堂,莫育俊. Er3+、In3+等金属离子对多孔硅光致发光性质的影响[J]. 化学物理学报(中文版), 2000, 13(3): 321-323. DOI: 10.1088/1674-0068/13/3/321-323
作者姓名:黄明举  徐国定  张兴堂  莫育俊
作者单位:河南大学物理系开封 475001  
摘    要:用阳极腐蚀的方法制备了多孔硅样品,用电化学方法在多孔硅中注入Er3+、In3+等金属离子,并对注入离子后多孔硅的光致荧光光谱进行了研究,结果表明:注入Er3+及In3+后的多孔硅在588nm处的发光峰强度大大增加,同时发光峰稍有展宽。随着离子注入时间的增长,强度继续增加,但当离子溶液浓度一定时,这种增强对时间具有饱和性。

关 键 词:多孔硅  荧光光谱

The Effect of Er3+ and In3+ on Photoluminescence Properties of Porous Silicon
Huang Mingju,Xu Guoding,Zhang Xingtang,MO Yujun. The Effect of Er3+ and In3+ on Photoluminescence Properties of Porous Silicon[J]. Chinese Journal of Chemical Physics, 2000, 13(3): 321-323. DOI: 10.1088/1674-0068/13/3/321-323
Authors:Huang Mingju  Xu Guoding  Zhang Xingtang  MO Yujun
Affiliation:{{each article.affiliations aff i}} {{if aff.addressEn && aff.addressEn != ""}} {{if aff.label && aff.label != "" && article.affiliations.length != 1}}{{@ aff.label}}.{{/if}}{{@ aff.addressEn}}{{/if}} {{/each}}
Abstract:The porous silicon (PS) samples were prepared by anodic etching method,and the Er3+,In3+were implanted into the PS samples by plating method.The results show that the implantation of such ions improves greatly the intensity of photoluminescence(PL) of the PS samples and makes the PL peak slightly blue-shift.With the increase of the plating time,the intensity of the PL increases continuously,but it has a saturation property to the plating time.
Keywords:Porous silicon  Photoluminescence
本文献已被 万方数据 等数据库收录!
点击此处可从《化学物理学报(中文版)》浏览原始摘要信息
点击此处可从《化学物理学报(中文版)》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号