首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于镜像分析的空心导管光束整形原理研究
引用本文:贾文武,汪岳峰,黄峰.基于镜像分析的空心导管光束整形原理研究[J].光子学报,2008,37(9):1756-1759.
作者姓名:贾文武  汪岳峰  黄峰
作者单位:军械工程学院,光学与电子工程系,石家庄,050003
摘    要:基于镜像原理,对空心导管LD面阵光束整形的原理和输出光场的特点进行了分析,并对LD面阵光束经过空心导管后的光强分布进行了仿真.发现空心导管将LD不同角度范围的光束进行分割,并在出射面内叠加的光束整形原理.通过仿真得出由于发散角较大以及各分割角度范围光束角度不连续,使出射面上的平顶光束发生畸变,只适于泵浦薄激光介质的结论.

关 键 词:激光技术  空心导管  镜像分析  光束整形
收稿时间:2007-05-24
修稿时间:2007-07-10

Beam Shaping Principle of Hollow Duct Based on Mirror Method
JIA Wen-wu,WANG Yue-feng,HUANG Feng.Beam Shaping Principle of Hollow Duct Based on Mirror Method[J].Acta Photonica Sinica,2008,37(9):1756-1759.
Authors:JIA Wen-wu  WANG Yue-feng  HUANG Feng
Abstract:Based on the mirror method,the shaping principle of hollow duct for LD arrays and the character of output light were presented.The beam shaping principle is that hollow duct divides the LD light according to it′s angle,and then overlaps them in the output plan.The computer simulation results show that the hollow duct shaping system is limited to pump thin laser medium,because its large divergence and discontinuity of angle between different LD light part is presented.
Keywords:Laser technique  Hollow duct  Mirror method  Beam shaping
本文献已被 维普 万方数据 等数据库收录!
点击此处可从《光子学报》浏览原始摘要信息
点击此处可从《光子学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号